|
Bob Morales posted:If it's not going to be freezing where you live, it'll be fine. In the winter I bring my batteries in the house over the winter. Trickle chargers are cheap, from $10-$100 depending on which one you get. Yeah, it won't be getting too cold. I'll probably just bring the battery inside. Change it before or after storage?
|
# ? May 5, 2009 23:26 |
|
|
# ? May 16, 2024 18:02 |
|
Christoff posted:Yeah, it won't be getting too cold. I'll probably just bring the battery inside. After.
|
# ? May 5, 2009 23:28 |
|
I was wondering if anyone could help me identify this bike and give me information on it. I'm considering buying it but I can't find out much which bothers me. Click here for the full 764x573 image. Click here for the full 764x573 image. Click here for the full 764x573 image.
|
# ? May 6, 2009 00:15 |
|
Moonlitenite posted:I was wondering if anyone could help me identify this bike and give me information on it. I'm considering buying it but I can't find out much which bothers me The fact you're asking, means the bike is not for you. I can tell you a lot about the bike, but none of it is useful if you don't know how to work on bikes. You will not get ANY sort of support for it. You'll need to pick up manuals for a different kind of bike, and carefully interpret it so you can determine what is right, and not right for your bike. How much are they asking for it? Why are they selling it? Now, I just said DO NOT BUY IT. The bike is a Chinese piece of crap. It's got a honda clone motor, which is probably the best part of the bike.
|
# ? May 6, 2009 00:24 |
|
Has anybody tried Keith Code's superbike school? How did you feel about it, do you think it was worth the extra cost over a regular trackday? Anybody try the two day camps? They seem a bit salty seeing as I could almost buy a motorcycle for the price of one.
|
# ? May 6, 2009 01:18 |
|
Nerobro posted:The fact you're asking, means the bike is not for you. I can tell you a lot about the bike, but none of it is useful if you don't know how to work on bikes. You will not get ANY sort of support for it. You'll need to pick up manuals for a different kind of bike, and carefully interpret it so you can determine what is right, and not right for your bike. The seller is asking $500 for it. It's a 2004 with around 300 miles for it, and the seller said they never rode it and since he knows I'm interested in motorcycles he'd sell it to me.
|
# ? May 6, 2009 01:30 |
|
Shlomo Palestein posted:I'm not sure why you think it wouldn't work. The tanks on more modern bikes are less round-breadboxy tanks, but a cafe bike is pretty much just a set of clubman bars, cutdown (usually single) seat, rearsets, and sometimes a little round fairing. The two bikes you mention would be perfectly fine for that, they just won't look "period" because they have more modern elements to their styling. If you've got it and you feel like making those changes, there's no real reason not to. Let me direct you to: http://www.cb750cafe.com/ Obviously not totally modern, but the same concept applies. There's a guy at a local bar in Long Beach (The V Room if anyone cares) that cafe'd an R6. It's a little modern for me, but hot nonetheless.
|
# ? May 6, 2009 02:33 |
|
Moonlitenite posted:The seller is asking $500 for it. It's a 2004 with around 300 miles for it, and the seller said they never rode it and since he knows I'm interested in motorcycles he'd sell it to me. Well, its a Chinese bike. As Nero said, its got a clone of a Honda horizontal single. Probably 110cc or 140. You will get zero parts support for the bike itself. The only thing you will probably be able to easily replace will be the tires and chain. Everything else (and I mean EVERYTHING) is some one-off piece from China made by a company that probably doesnt exist anymore. Even the Honda clone motor may be tough to find parts for, as the Chinese copies are often not 100% copies of the original. If you can talk him down to $200, max, and have $200 to blow on a bike that may be dead next week, and are OK with shoddy brakes and such, then by all means buy it. That bike could go two ways. As I mentioned, it may be dead inside of a week, or it might last for a while. Be prepared to work on it a lot, create cludgy homebrew solutions that arent safe, and generally be frustrated. Also be prepared to straight up throw it away when it finally kicks the bucket, or you're done with it. The resale on Chinese bikes is nonexistent.
|
# ? May 6, 2009 02:50 |
|
Moonlitenite posted:The seller is asking $500 for it. It's a 2004 with around 300 miles for it, and the seller said they never rode it and since he knows I'm interested in motorcycles he'd sell it to me. It's not a safe bet. I know probably a dozen people on this forum that could buy that and do "something" worthwhile with it. But even $500 is to much. New it was $1000.
|
# ? May 6, 2009 02:51 |
|
OrangeFurious posted:Let me direct you to: SOHC CB750's can be cafe'd. The bikes that were otherwise referenced were (or at least, I assumed) the 90's and 00's equivalents, which aren't really stylistically supportive of the cafe treatment. The CB750 is one of the most commonly cafed vintage bikes out there; Carpy's site is fairly well known.
|
# ? May 6, 2009 03:24 |
|
Sick_Nukes posted:Has anybody tried Keith Code's superbike school? How did you feel about it, do you think it was worth the extra cost over a regular trackday? Anybody try the two day camps? They seem a bit salty seeing as I could almost buy a motorcycle for the price of one. Where are you located? From everything I've heard, Keith Code does a fantastic job of breaking down the steps to learning to go fast. I could just never justify one of his days as there are a lot of trackday providers out here who offer some amazing schools for 1/10th of the price.
|
# ? May 6, 2009 06:29 |
|
How do I persuade a friend who's never ridden a moped and is dead set on buying a >2000 600cc sportbike? I'm worried he'll buy one, ride it for a month, crash/drop it, sell it and forget about motorcycles. I feel guilty for getting him interested in bikes
|
# ? May 6, 2009 16:03 |
|
jujube posted:How do I persuade a friend who's never ridden a moped and is dead set on buying a >2000 600cc sportbike? I'm worried he'll buy one, ride it for a month, crash/drop it, sell it and forget about motorcycles. You can't. Just let him ride.
|
# ? May 6, 2009 16:07 |
|
At least convince him to get decent accident and regular insurance so when he does break himself he's not totally screwed
|
# ? May 6, 2009 16:30 |
|
Convince him to get an SV650S?
|
# ? May 6, 2009 16:37 |
|
blugu64 posted:Convince him to get an SV650S? Use the unfailing logic of 650 is larger that 600. Problem solved! Unfortunantly, there's not much that you can do to convince someone when they're dead set on a 600. Just get them to the MSF and pray.
|
# ? May 6, 2009 16:46 |
|
blugu64 posted:Convince him to get an SV650S? I've given him plenty of pillion rides on my SV but for some reason he wants something else. Something goes VROOM VROOM and looks like a spacerocket. I wouldn't mind if it was any other person but he just doesn't seem to be interested in bikes except for the VROOM and the looks. Gah, oh well.
|
# ? May 6, 2009 16:54 |
|
jujube posted:How do I persuade a friend who's never ridden a moped and is dead set on buying a >2000 600cc sportbike? I'm worried he'll buy one, ride it for a month, crash/drop it A good friend of mine did the same thing (bought an R6). He died on 3/8/07 in a motorcycle accident.
|
# ? May 6, 2009 17:06 |
|
jujube posted:I've given him plenty of pillion rides on my SV but for some reason he wants something else. Something goes VROOM VROOM and looks like a spacerocket. A new Ninja 250 goes vroom all of the time and looks just like any other spacerocket (except for the narrower wheels and smaller muffler), get him to take a look
|
# ? May 6, 2009 17:07 |
|
jujube posted:I've given him plenty of pillion rides on my SV but for some reason he wants something else. Something goes VROOM VROOM and looks like a spacerocket. Ninja650r (the r is how he knows its fast)
|
# ? May 6, 2009 17:12 |
|
I might convince him to buy a 400cc, but for some strange reason he's dead set on a GSXR (2001-2004) There's something about GSXR's that causes temporary (or chronic) retardedness.
|
# ? May 6, 2009 17:43 |
|
jujube posted:
I've noticed this as well and I'm not alone. There's also something about retardedness that causes GSXRs. It's the ultimate squid bike.
|
# ? May 6, 2009 17:51 |
|
jujube posted:I might convince him to buy a 400cc, but for some strange reason he's dead set on a GSXR (2001-2004) For some reason I find this to be oddly true. The guys in my local shop all seem to think if you ride a GSXR and are under 30 your a guaranteed squid.
|
# ? May 6, 2009 18:17 |
|
Are gel grips worth it? I apparently damaged a nerve while riding, and thus would like something better then the stock grips. I'm looking at Progrips 716. No I wasn't death gripping the bars either.
|
# ? May 6, 2009 18:29 |
|
jujube posted:How do I persuade a friend who's never ridden a moped and is dead set on buying a >2000 600cc sportbike? I'm worried he'll buy one, ride it for a month, crash/drop it, sell it and forget about motorcycles. Pray he won't pass his AVB exam? You can't talk him out of a bike, but you can talk him into good insurance and, if you're lucky, full gear. Good luck dude.
|
# ? May 6, 2009 18:31 |
|
blugu64 posted:Are gel grips worth it? I apparently damaged a nerve while riding, and thus would like something better then the stock grips. I'm looking at Progrips 716. No I wasn't death gripping the bars either. Did the vibration damage the nerve or pressure from leaning on your hands? I vary grips depending on the bike I'm running. SVs get the OEM ones, because they offer good feel and padding. For the g/f's Z1000, I like the grips that are on there, which are bigger honeycomb ones. Foam grips on big singles are nice to insulate every more. I'd suggest going out and buying a bunch of different types so that you can figure out what fits you and your bike the best. Yeah, you'll end up dumping 50$ or so on grips, but comfort is something that you get everytime you get on the bike. If the problem is the vibration, and you've got hollow bars, you can fill them with ball bearings, sand, or a bar snake to cut down on vibration. Z3n fucked around with this message at 20:01 on May 6, 2009 |
# ? May 6, 2009 19:00 |
|
blugu64 posted:Are gel grips worth it? I apparently damaged a nerve while riding, and thus would like something better then the stock grips. I'm looking at Progrips 716. No I wasn't death gripping the bars either. I personally would be weary of buying gel anything, especially things like grips and bicycle seats. It can cause more damage if the gel's in the wrong place. It's way too subjective since everyone's built differently. Seconding Z3n's ideas.
|
# ? May 6, 2009 19:19 |
|
Christoff posted:- edit Also - If I change the oil just before I store it do I need to change it again before I ride it? Would it be a bad idea to not change the oil in there now and change it when I get back? It has about 1,000 miles or so on it and the filte.r People say to change the oil before storage, mostly so you don't forget to do it when you pull it out. You'll likely be raring to get riding again, and might put it off. Stick a big sign on it that says CHANGE THE OIL and you'll be fine. blugu64 posted:Are gel grips worth it? I apparently damaged a nerve while riding, and thus would like something better then the stock grips. I'm looking at Progrips 716. No I wasn't death gripping the bars either. It'd probably be better to get gloves with padding in the palms.
|
# ? May 6, 2009 20:19 |
|
I've got a brake problem and I'm stumped. When I turn the bars all the way to one side or the other the front brake drags ever so slightly. Its enough to make an awful squealing sound and make the bike hard to move around by hand. At speed on riding the bike, even low speed maneuvers, I don't notice or hear it at all. I've checked the pads, the fluids, the lines, everything seems fine. Braking power is truly excellent for a 70's bike. Any ideas?
|
# ? May 6, 2009 20:47 |
|
anyone know if it's possible to weld a crack in an alloy rim? or is that asking for a highside
|
# ? May 6, 2009 20:59 |
|
Rev. Dr. Moses P. Lester posted:anyone know if it's possible to weld a crack in an alloy rim? or is that asking for a highside If anything, I would think that you'd be introducing a bit of extra weight off to the side that the crack is on, which would have to be counterbalanced.
|
# ? May 6, 2009 21:16 |
|
Rev. Dr. Moses P. Lester posted:anyone know if it's possible to weld a crack in an alloy rim? or is that asking for a highside It's possible, not recommended. Tire on a car, not the end of the world if it falls to pieces, but on a bike it's a bit more important. What sort of crack is it? If you absolutely must repair that rim, I'd take it to a professional who's willing to tell you if it's not repairable, and isn't just looking for more buisness.
|
# ? May 6, 2009 21:20 |
|
Is it common for the space between swingarm forks to be slightly wider (about 1/8th to 1/16th) than the fully assembled rear wheel?
|
# ? May 6, 2009 23:12 |
|
What <= 500cc cruiser would be a comfortable ride for a 6'3" dude buying his first bike? I fear a Rebel and Virago would be too cramped.
|
# ? May 6, 2009 23:17 |
|
Bukanza posted:What <= 500cc cruiser would be a comfortable ride for a 6'3" dude buying his first bike? I fear a Rebel and Virago would be too cramped. Why less than 500cc? Unless it's part of a licensing restriction, there's not much reason to limit yourself like that. Cruiser's are not like Supersports where a 600cc engine makes huge power....
|
# ? May 6, 2009 23:25 |
|
Bukanza posted:What <= 500cc cruiser would be a comfortable ride for a 6'3" dude buying his first bike? I fear a Rebel and Virago would be too cramped. A Vulcan 500 will probably be a too cramped for you, too. I'd look toward a Shadow 650 at least. 650 through 800/900 cc twin cruisers should be okay for a beginner, if only a little heavy.
|
# ? May 6, 2009 23:34 |
|
`Nemesis posted:Why less than 500cc? That said, I've passed the MSF course, have my endorsement and have a year and a half experience on a 125cc scooter if that matters.
|
# ? May 6, 2009 23:44 |
|
Bukanza posted:Basically everything I read online is along the lines of "AHH NOTHING OVER 250CC FOR YOUR FIRST BIKE YOU GUNNA DIE!". Don't worry about displacement, worry about power. Displacement is practically meaningless.... what you should be doing is aiming for less than 70hp or there-abouts. For example, a Vulcan 800 produces like 55hp, which is quite newbie friendly.
|
# ? May 6, 2009 23:54 |
|
Bukanza posted:What <= 500cc cruiser would be a comfortable ride for a 6'3" dude buying his first bike? I fear a Rebel and Virago would be too cramped. I'm 6'2 and took the MSF on a rebel. I ended up sitting on the passenger seat a lot, so yeah, don't do a rebel. Something like a 600cc or more Shadow would be a good possibility.
|
# ? May 7, 2009 00:14 |
|
|
# ? May 16, 2024 18:02 |
|
Is 17k miles on a sportbike an acceptable amount? The bike has been maintained meticulously and by a good shop. The bike has however been tracked several times.
|
# ? May 7, 2009 00:16 |