|
Z3n posted:Did you make sure the terminals are hooked up correctly and the wiring harness ground is connected correctly? There's a blade connector that attaches to a lead off the negative terminal of the battery and provides the ground for the wring harness. Wiring harness is properly grounded, terminals are hooked up correctly. I'm getting zip, zero power. I have a multimeter, will be going over this entire thing with my service manual. Haven't checked the main fuse yet. That's the first thing I'll do.
|
# ? Jul 17, 2010 16:44 |
|
|
# ? May 21, 2024 16:29 |
|
Do you get power at the battery
|
# ? Jul 17, 2010 17:16 |
|
Any hints on the proper way to clean a gas cap lock out and lube it? Damned thing won't accept the key all the way, so something's obstructing it. As I type this I'm going out with a can of air to explore that method first.
|
# ? Jul 17, 2010 19:53 |
|
niethan posted:Do you get power at the battery There's voltage across the battery but no current flowing no matter what.
|
# ? Jul 17, 2010 23:47 |
|
Ok I managed to get the gas cap to open, and I've removed it from the bike to better examine it and disassemble if necessary. Graphite lube is having no effect whatsoever. I'm not sure if it's the locking mechanism, tumblers and such, or the bit that actually retracts to allow the cap to swing up and out (the cam? bolt? something). One thing that might be at play is the key I use is a bit twisted. The ignition accepts it without any issue. I tried my spare key in the cap lock and that also doesn't want to budge. Any suggestions?
|
# ? Jul 18, 2010 05:38 |
|
Hah, score one for tinkering! After taking the cap apart I began getting after it with the canned air again, and while holding the it so the lock was perpendicular to the ground all the graphite came out in a black cloud. Course, now my couch is a little more gray than it used to be, but the cap lock works like a charm! Looks like I've found another thing to add to the periodic maintenance list.
|
# ? Jul 18, 2010 06:06 |
|
How do you know when you need new tires? I recently picked up an 05 ninja that's still running the stock tires. I'd think that I'd need new ones because of the age, but the bike only has 1600 miles on it, so the tires look almost new. What should I do?
|
# ? Jul 18, 2010 17:45 |
|
bladesamurai posted:How do you know when you need new tires? I recently picked up an 05 ninja that's still running the stock tires. I'd think that I'd need new ones because of the age, but the bike only has 1600 miles on it, so the tires look almost new. What should I do? Mileage wise they're pretty new tires, but age wise they're pretty old. Do they have any dryrotting in them?
|
# ? Jul 18, 2010 17:50 |
|
Once tires have a certain age they harden out and don't really lose as much tread anymore. At least that's what the dude at my workshop told me. Five year old tires aren't good anymore, get new ones.
|
# ? Jul 18, 2010 18:00 |
|
My tdm has a bit of a hard time shifting into or out of first. If I don't go along a crawl speed my shifter keeps rattling and grinding gears. Is this a characteristic of some gearboxes or is there a setting I can fiddle with to make it less 'grabby'?
|
# ? Jul 18, 2010 23:17 |
|
How's the clutch adjustment? Notchy/difficult shifting in and out of neutral can be a problem when the clutch doesn't disengage fully because the cabled needs to be tightened up a bit.
|
# ? Jul 19, 2010 00:19 |
|
Z3n posted:How's the clutch adjustment? Notchy/difficult shifting in and out of neutral can be a problem when the clutch doesn't disengage fully because the cabled needs to be tightened up a bit. Karma!, this is a characteristic of a hosed gearbox. It's not normal for either 3VD or 4TX. As Z3N says, you hope that the problem is that the clutch isn't disengaging properly, which will manifest most obviously bridging the gap between 2nd and 1st. Start with cable adjustment. If you can't adjust it out, you could try pulling the clutch, replacing the clutch springs and checking that the plain plates haven't warped. If it's not a clutch problem, I'd just avoid 1st gear unless you fancy rebuilding the transmission.
|
# ? Jul 20, 2010 09:10 |
|
Saga posted:Karma!, this is a characteristic of a hosed gearbox. It's not normal for either 3VD or 4TX. Good thing I have warranty then, since adjusting only changed the engagement point further out. Saga posted:If it's not a clutch problem, I'd just avoid 1st gear unless you fancy rebuilding the transmission. Ack, I need this thing for a motorcycle holiday mid-august! Thanks for the details, I'll get right on it. Let's hope it's just the clutch..
|
# ? Jul 20, 2010 10:33 |
|
Could also be grit in the shift selector mechanism...I'm not sure what the design of the TDM is specifically, but many transmissions use a ratchet and pawl system. If you get grit in the place where the pawl rests it can cause the transmission to jump out of gear or not want to go into gear.
|
# ? Jul 20, 2010 17:51 |
|
GS500 is running hot and lean. The revs climb at idle and fall very slowly.. Carbs are sealed tight, not a vacuum leak. I have to leave for a trip this weekend so I can't order new jets. Is there a chance changing the float bowl height would change the situation?
|
# ? Jul 21, 2010 03:51 |
|
I was gifted a track day next month by my KINDA SORTA GIRLFRIEND for helping her out with her race bike. I don't have anything other than my GS700 to bring although she will have her prepped N250 there as well. I'd like to at least get a few go arounds with the GS to see what she feels like ridden in anger. What sort of prep should I do? It's got fresh fork oil and seals already. Just changed the oil with Rotella synth. Valve adjustment is recent. Tires are BT45s with more than 1/2 life left. I can't think of anything else. What tire pressure should I start with? I run 40 rear and 30 front for the street. The track days is at Streets so it's going to be loving retardedly (105+) hot with the track itself pretty slow but twisty. EDIT: This is my first track day so any other advice is welcome too!
|
# ? Jul 21, 2010 04:00 |
|
Bugdrvr posted:
Give these a read. http://www.amazon.com/Twist-Wrist-Motorcycle-Roadracers-Handbook/dp/0965045013/ref=sr_1_1?ie=UTF8&s=books&qid=1279700482&sr=8-1 http://www.amazon.com/Twist-Wrist-Basics-High-Performance-Motorcycle/dp/0965045021/ref=pd_bxgy_b_img_b
|
# ? Jul 21, 2010 09:23 |
|
Bugdrvr posted:What tire pressure should I start with? I run 40 rear and 30 front for the street. Do you have saddlebags full of bricks?
|
# ? Jul 21, 2010 14:37 |
|
Bugdrvr posted:Your KINDA SORTA GIRLFRIEND is completely KINDA SORTA AWESOME. That's one badass gift. This goes without saying but DRINK SHITLOADS OF WATER. Start hydrating the day before and continue drinking throughout your trackday. You're going to be working hard on the bike (finding muscles in your legs you had no idea even existed!) and the weather is going to drain you even more. Assuming whoever is running the trackday has control riders, make use of them! If you're having an issue with any particular part of the track they can help you out, work on body positioning, lines, etc. Listen to what they have to say. I can't help you on the tire front because all I did on BT45s was putt around on a old CB750, never any track riding on them. Other advice: Take it easy. You're not there to win anything. Bring a comfy chair to relax in between sessions DRINK WATER. Don't feel pressured to ride all the sessions, or ride for the entire session time. Yes, track time is expensive but crashing because you're tired and not making good decisions is even more expensive. WEAR GOOD GEAR! Including a back protector if you can get your hands on one. Most trackday orgs have leathers and back protectors for rent if you're not ready to buy one just yet. DRINK WATER Have fun
|
# ? Jul 21, 2010 14:48 |
|
Bugdrvr posted:I was gifted a track day next month by my KINDA SORTA GIRLFRIEND If you havent done it recently, flush the brake fluid out with some fresh stuff, or you'll be boiling water pretty quickly.
|
# ? Jul 21, 2010 15:35 |
|
Phat_Albert posted:If you havent done it recently, flush the brake fluid out with some fresh stuff, or you'll be boiling water pretty quickly. Yep, replace all that nasty brake fluid (makes a slippery mess if you crash) with nice fresh deionised water. e: this is guaranteed to increase your corner speed dramatically for at least one corner.
|
# ? Jul 21, 2010 15:46 |
|
Bugdrvr posted:I was gifted a track day next month by my KINDA SORTA GIRLFRIEND for helping her out with her race bike. I don't have anything other than my GS700 to bring although she will have her prepped N250 there as well. I'd like to at least get a few go arounds with the GS to see what she feels like ridden in anger. What sort of prep should I do? It's got fresh fork oil and seals already. Just changed the oil with Rotella synth. Valve adjustment is recent. Tires are BT45s with more than 1/2 life left. I can't think of anything else. I'd drop the rear pressures down to 32-34 or so for the track, and maybe knowing how you ride the brakes and turn in on the front might consider bumping it up a bit, as you're going to be abusing the hell out of it. Flushing your brake fluid is good, and the GS700 is going to wear you the hell out on that track.
|
# ? Jul 21, 2010 16:58 |
|
I accidently picked up resistor spark plugs up for my GSXR. DR9EA's instead of D9EA's. Should I return them and grab the non resistor type? Will the resistor have any negative performance effects?
|
# ? Jul 21, 2010 18:54 |
|
Phat_Albert posted:If you havent done it recently, flush the brake fluid out with some fresh stuff, or you'll be boiling water pretty quickly. Seriously. My first trackday I rode way above my head and I was boiling that poo poo, I almost died too many times.
|
# ? Jul 21, 2010 19:11 |
|
Thanks for all of the advice. I do plan on drinking a ton of water. I was at Big Willow all weekend helping her and another friend and I ended up drinking two gallons of water even though I really didn't do much of anything except a few wheel swaps and put bikes on and off rear stands. I do have some decent gear. I've got good everything including a back protector and I'm borrowing my friends backup leathers as they seem to fit perfectly. My brake fluid is pretty recent as well. I have been using Castrol Response since I got a bunch of quarts for free when our Austin Martin dealer closed down. Should be good for whatever I will manage to do to it. I figure the GS will be a handful on such a short track. I would like to take it out for at least one session for fun. If it proves to be too much I'll just ride the 250. I'll have to post up some pics of the GS in a field of new SS bikes. Hopefully it won't include any of it being hauled back to the infield in the back of a beat up Toyota pickup by a few of Palmdales finest rednecks.
|
# ? Jul 22, 2010 01:34 |
|
Welp, I just reseated and cleaned all the electrical connectors and now my SV650 works. I need to figure out which one was causing this, I didn't even replace any fuses. However, I did find out that the PO has used every single spare fuse. Going to be restocking those this week, don't want to be caught out there with no spare main fuse.
|
# ? Jul 22, 2010 02:19 |
|
Y'all talking about flushing the brake fluid makes me curious. What's a reasonable time frame for replacement? Depends on use, I'm sure. Or is it more a "check it and replace if needed you idiot" type thing?
|
# ? Jul 22, 2010 03:40 |
|
Ghost of Razgriz posted:Y'all talking about flushing the brake fluid makes me curious. What's a reasonable time frame for replacement? Depends on use, I'm sure. Or is it more a "check it and replace if needed you idiot" type thing? If you have to ask how long it's been since you changed brake fluid, do it? The manual for my SV650 says brake fluid and coolant every 2 years, and replace all brake hoses every 4. It's 10 years old and has factory hoses on it.
|
# ? Jul 22, 2010 04:08 |
|
Ghost of Razgriz posted:Y'all talking about flushing the brake fluid makes me curious. What's a reasonable time frame for replacement? Depends on use, I'm sure. Or is it more a "check it and replace if needed you idiot" type thing?
|
# ? Jul 22, 2010 04:34 |
|
chryst posted:The fluid should be clear to light amber. When it starts getting darker in color, it's time to flush it. And don't believe what you can see through the window/reservoir. The used EX500 I picked up from a dealer had almost crystal clear fluid in the reservoir, but they hadn't actually flushed any through the calipers. When I went to drain the system before installing a new stainless line, black muck came out of the bleeder
|
# ? Jul 22, 2010 04:47 |
|
I discovered why all the Ebay stores boldly state in bright red "US ADDRESSES ONLY WILL NOT SHIP INTERNATIONALLY!" A guy on another forums needed a GSX-R tank, and couldn't find one anywhere in Australia that wasn't dented or a thousand AU moon bucks. So he drop-shipped it to me to forward. In return for the favor, he's fabricating me up a few parts. Aside from the $428 price tag, it took almost 3 hours for the people at the post office to work through which customs forms, labeling, size restrictions, and whatnot. Plus, they had me unpack it so they could verify that it was clean enough to not get dinged as a hazmat by customs. What a pain in the rear end.
|
# ? Jul 22, 2010 19:33 |
|
Weinertron posted:If you have to ask how long it's been since you changed brake fluid, do it? The brake fluid in my old 1991 ZX600 looked like a dehydrated man with kidney failure pissed into the fluid reservoir. Also old brake lines are pimp cause they are stiff like braided stainless steel lines. Cheap mans stiff brake handle
|
# ? Jul 22, 2010 19:37 |
|
chryst posted:I discovered why all the Ebay stores boldly state in bright red "US ADDRESSES ONLY WILL NOT SHIP INTERNATIONALLY!" And after all that, the chances of that actually getting to Australia un-dented are pretty loving slim.
|
# ? Jul 23, 2010 10:05 |
|
I'm a goon in Denver. My uncle and brother both joined a Marine Corps biker club on me, those fuckers. I'm military too, but I passed the ASVAB so I went into another branch. My uncle and brother said they let other vets come along, but other branches don't get full patches and never get voting rights. They also don't get to go to every function. Also, there's this whole thing about how I can barely stand the two Marines I love, much less 50 of them for extended road trips. In other words, "gently caress that." So I'm left on my own now, with no riding partners. My uncle and my brother spend most of their time at their new illiteracy club. I've been invited to ride with some guys, but I haven't done so yet. I was wondering if there's a goons on gears or something that exists. Is there a goons MC? If not, should we start one?
|
# ? Jul 23, 2010 10:27 |
|
Alastor posted:Screw them. Ride by yourself. Done. It's something I'm learning to love more every day.
|
# ? Jul 23, 2010 13:37 |
|
Crayvex posted:Screw them. Ride by yourself. Done. I am not going to Tijuana alone. Someone has to bring bail money.
|
# ? Jul 23, 2010 13:43 |
|
Alastor posted:I am not going to Tijuana alone. What's the matter? Are you too good for Amerikun roads??
|
# ? Jul 23, 2010 13:49 |
|
Crayvex posted:What's the matter? Are you too good for Amerikun roads?? No. Too poor.
|
# ? Jul 23, 2010 13:56 |
|
How easy is it to change the oil? Sounds like a silly question but I've never done any maintenance on my car or anything before. This bike I just bought when I tried to start it this morning after a few days of not touching it (darn you work!) it would catch for like 15seconds then turn off and the oil light comes on. I imagine since I don't know what type of oil was in there I should drain whatever might be in there before putting new oil in, right? God I really hope thats the problem and there is nothing larger. It totally ran fine when I got it
|
# ? Jul 23, 2010 15:29 |
|
|
# ? May 21, 2024 16:29 |
|
ChiTownEddie posted:How easy is it to change the oil? The oil light comes on because when the bike stalls the oil pressure drops to 0. that light is telling you is that there isnt any oil pressure when the engine isnt running, which is normal. You have other issues to solve besides oil.
|
# ? Jul 23, 2010 15:33 |