|
the wizards beard posted:What tuning do you use? 31 and 62Hz are near the low B on a 5 string bass and a 7 string guitar respectively, if you don't tune that low then can only help by cutting out low-frequency noise (but lots of guitar amps, pedals and speakers will do that anyway) there's still an undertone component to any harmonic vibration, but 31 Hz might be getting a little gimmicky. For reference, the lowest you can year is about 20 Hz, and 31 Hz is less than an octave above that (er, not you, the guy you responded to). However, at similar price and function I give MXR the edge on quality. Their gear is pretty solid.
|
# ? Jun 15, 2010 17:15 |
|
|
# ? May 9, 2024 06:03 |
|
CalvinDooglas posted:there's still an undertone component to any harmonic vibration No there isn't, that's what a harmonic series is. There might be lower resonant modes of your instrument that can be detected by the pickups but they're going be very inharmonic.
|
# ? Jun 15, 2010 18:34 |
|
I've been shopping for a delay pedal, and I've narrowed it down to two choices - the EHX Studio Memory Man with Hazarai and the Malekko Ekko 616. One's digital, one's analog - I've listened to Youtube demos of both, and I think I like the sound of the Ekko a little bit better, but the Memory Man has so many features that it's hard to just write it off. Anyone have any hands-on experience with either? I tend to play with a lot of crazy fuzzes, so if one handles dirt better, I'd love to know.
|
# ? Jun 22, 2010 17:59 |
|
I love the hell out of my SMMH and I highly recommend it but unfortunately I can't provide much of the perspective you're looking for as I haven't used the Ekko. My SMMH has no trouble with heavy fuzz in front of it's input. And if noise is your thing, you gotta try a nice fuzz AFTER the delay in your chain. Soundscapey.
|
# ? Jun 22, 2010 18:05 |
|
I've never used an Ekko either, but my SMMH is seriously my favorite pedal to play around with.
|
# ? Jun 22, 2010 22:56 |
|
What polarity are Boss power power supplies? I bout an RC-2 the other day, and of course they tell me to get their own supply, which wouldn't be nearly as annoying if they didn't purposefully not tell me the polarity. I have a center negative one lying around right now and I want to know if I can use that.
|
# ? Jul 5, 2010 01:00 |
|
Boss power supplies are center-negative. Just make sure you have the right current output and plug geometry. I had a cheap third-party one whose plug was a teeny bit too small, so it would disconnect if bumped.
|
# ? Jul 5, 2010 04:52 |
|
HappyHippo posted:What polarity are Boss power power supplies? I bout an RC-2 the other day, and of course they tell me to get their own supply, which wouldn't be nearly as annoying if they didn't purposefully not tell me the polarity. I have a center negative one lying around right now and I want to know if I can use that. moogerfoogers are one of the few things Ive run across to want reverse polarity, and boss stuff is notoriously hard to kill
|
# ? Jul 7, 2010 01:35 |
|
CalvinDooglas posted:a solid state amp, and turning those up won't make them sound any better. not in the same way it makes a valve amp sound better but it definitely makes a difference to my ears
|
# ? Jul 8, 2010 03:37 |
|
I'm looking at getting a reverb pedal to add a bit of depth to solos and leads (I play through an Engl Fireball if that helps, metal obviously). After some research it looks like the EHX Holy Grail Plus or Marshall Reflector will be the go, I'm on a bit of a budget otherwise I'd spring for the TC Electronic reverb and be done with this dilemma. Any suggestions either way, or other pedals I should look at? edit: I don't need stereo or reverse so something pretty basic should do I think
|
# ? Jul 11, 2010 18:27 |
|
http://www.aronnelson.com/gallery/main.php/v/Processaurus/Line+6+expression+switch.gif.html?g2_imageViewsIndex=1 So could someone explain how the hell this circuit mod works? Assuming the expression pedal input is always closed, how the gently caress does the 10k resistor ever do anything hooked to both legs? Am I wrong in assuming "tip of exp -> led -> 10k res -> switch -> ground of exp" is the correct wiring? There's like drat near zero info on the line 6 stompbox mods because every rear end in a top hat on the internet wants to charge me 3 times the price of parts just for a piece of poo poo schematic like that or sell me the parts at like 500% markup.
|
# ? Jul 12, 2010 09:06 |
|
membranoid posted:http://www.aronnelson.com/gallery/main.php/v/Processaurus/Line+6+expression+switch.gif.html?g2_imageViewsIndex=1 As far as I can make out, the proper EX-1 pedal is a 10k variable resistor operated by a treadle. i.e. you can have the treadle fully forward, fully back or anywhere in between. The schematic there, just gives you fully forward, or fully back: When the switch is closed, it shorts the resistor out which represents one end of the pedals sweep. The resistance at the plug = 0 When the switch is open the LED lights up, and the 10k resistor conducts. this is the other end of the pedal's sweep. Resistance at plug = 10k I guess the use of this is to switch between two presets instead of sweeping between? Chalupa Joe fucked around with this message at 11:38 on Jul 13, 2010 |
# ? Jul 13, 2010 11:26 |
|
Yea that's exactly the use for the mod. So if I understand correctly it should have a completely open no resistance circuit (instead of no connection at all) to simulate the heel position of the pedal and the 10k resistor on the switch to simulate the toe position. edit: No wait I think I get it, when the switch is closed it bypasses the led and resistor (least resistance :facepalm:) and when it is open it is forced to travel through them. membranoid fucked around with this message at 08:36 on Jul 14, 2010 |
# ? Jul 14, 2010 08:32 |
|
Exactly. Your edit is correct. with the first part, just to clear things up: quote:So if I understand correctly it should have a completely open no resistance circuit (instead of no connection at all) to simulate the heel position of the pedal and the 10k resistor on the switch to simulate the toe position. If it were completely open it's effectively infinite resistance (which is the same as not having the pedal connected), shorted out is no resistance, i.e. heel position.
|
# ? Jul 14, 2010 09:20 |
|
Quick question: With DSP-based pedals (specifically I'm talking about reverb pedals like the Holy Grail, Hardwire RV-7 ,etc), does the blend knob mix in a fully dry signal (ie untouched by the DSP chip and completely undigitsed) or is it a case of the signal going to the DSP chip, being digitised, getting split into dry and wet, processed, then analogised, then to the output? I don't mean to incite the old analog/digital debate, and I know the bottom line is "if it sounds good, who cares", but so far I've managed to get good sounding stuff that is also analog and if I can, I'd like to keep it that way. EDIT for clarification: The point is I'm happy to get a DSP-based pedal if allows me to output a mix of completely analog dry signal and digital wet, so I want to get a reverb pedal that allows me to do this.
|
# ? Jul 16, 2010 14:15 |
|
Some do and some don't. There is endless debate online as to which pedals are which and if it even matters
|
# ? Jul 16, 2010 16:01 |
|
the wizards beard posted:Some do and some don't. There is endless debate online as to which pedals are which and if it even matters Cheers. For what it's worth, someone on TGP quotes a Digitech support rep talking about the Hardwire DL-8: "When the delay is off, it is in true bypass. When the delay is on, the dry signal is completely analog (no AD or DA conversions) and the wet signal is digital. The "Level" knob on the pedal is an analog control of the wet signal." Presumably that's the same for the RV-7!
|
# ? Jul 17, 2010 03:11 |
|
Does anyone have any experience with the Way Huge Swollen Pickle? I'm thinking about picking one up, and want to know if I'm missing any massive flaws, or if it's as cool of a fuzz as it looks.
|
# ? Jul 30, 2010 02:44 |
|
Is there any suggestions on Compressor placement to help reduce/remove the white noise that comes on with it? Its very subtle, but with any dirt, it becomes a bit more obvious with the pick attack. Trying to use it for some added sustain.
|
# ? Jul 30, 2010 04:52 |
|
Ozymandius posted:Is there any suggestions on Compressor placement to help reduce/remove the white noise that comes on with it? Its very subtle, but with any dirt, it becomes a bit more obvious with the pick attack. Typically you have to use a noise gate and strike a balancing act between the compressor noise opening the gate and the gate killing your sustain.
|
# ? Jul 30, 2010 18:59 |
|
dizzywhip fucked around with this message at 21:55 on Nov 9, 2020 |
# ? Aug 3, 2010 08:39 |
|
MXR makes 6 and 10 band EQs for $65 and $115, respectively Behringer makes one for $30 Rackmount 10 band EQs are a dime a dozen on craigslist
|
# ? Aug 3, 2010 08:43 |
|
dizzywhip fucked around with this message at 21:55 on Nov 9, 2020 |
# ? Aug 3, 2010 19:19 |
|
Yeah, the MXR 10-band is widely used and well regarded.
|
# ? Aug 3, 2010 19:21 |
|
I've read some reviews that say that the korg pitchblack tuner pops when you turn it on, any goons have any experience with this? I really don't want any more pedals that pop
|
# ? Aug 3, 2010 20:23 |
|
Hungry Joe posted:I've read some reviews that say that the korg pitchblack tuner pops when you turn it on, any goons have any experience with this? I've got one and haven't had any problems with mine popping. The switch is even a "soft" one (don't know the technical term) that doesn't click when you step on it.
|
# ? Aug 3, 2010 20:31 |
|
Let's revisit devi ever's pedals. I'm thinking about buying a Legend of Fuzz because it looks like the NES Zelda cart and it would make a fantastic impulse buy. I've never owned a fuzz though. Also this thread made me hook up my Boss SD-1 and try and fiddle with it to find some good sounds. Bonus content: When I was in elementary school I threw away a big muff and a small stone I inherited because I had no idea what they were.
|
# ? Aug 4, 2010 02:08 |
|
Tsunami Redux posted:Let's revisit devi ever's pedals. I'm thinking about buying a Legend of Fuzz because it looks like the NES Zelda cart and it would make a fantastic impulse buy. I've never owned a fuzz though. I've got a Bit (that's the pedal you're referring to), and I'm not sure it's a good "first" fuzz. If you're looking at Devi's pedals and are tip-toeing in, I'd recommend checking out either the Hyperion or the Vintage Fuzz Master - both are really starter-friendly pedals that have a lot of great tones. The Torn's Peaker or its metal sibling Aenima are also pretty usable in a lot of situations. I love my Bit, but it's a really finicky, ultra-loud mess that sounds like a buzzsaw - which means it does exactly what I bought it for, but it isn't the most versatile pedal on Devi's roster. If you want to go all out, I'd really recommend a Shoegazer. $200 gets you a VFM and a TP in one box.
|
# ? Aug 4, 2010 03:17 |
|
I'm a HUGE fan of the Zvex Fuzz Factory. If you're into fuzz, do yourself a favor and check them out. Demo video here. The Vexter line is the same thing, just mass-produced in China or someshit, I couldn't tell a difference between them in a side-by side comparison with my own gear, so I went with the Vexter and haven't looked back.
|
# ? Aug 4, 2010 03:50 |
|
I checked out the shoe gazer and apparently it's a Soda Meiser and a Torns Peaker combined. I also saw the Bit Mangler, which is a Bit and a VFM with some extra controls and effects. The shoe gazer looks pretty neat, but really in all the demo videos all the pedals sound great. I read some reviews and some people saw Devi's pedals hiss and most of the settings are unusable. Are these people just crusty old guitarists that think the Big Muff sound is all there is to fuzz? I read about the Fuzz Factory too; people say most of what you dial in is unusable noise and it takes a lot of tweaking to find something good. I have a hard time dialing in stuff on my Boss pedals with two knobs let alone this thing with five. Is it hard to use? (As a side note I did see someone pull off some good 8-bit sounds with one, which is cool.)
|
# ? Aug 4, 2010 20:28 |
|
Tsunami Redux posted:I checked out the shoe gazer and apparently it's a Soda Meiser and a Torns Peaker combined. I also saw the Bit Mangler, which is a Bit and a VFM with some extra controls and effects. The shoe gazer looks pretty neat, but really in all the demo videos all the pedals sound great. I read some reviews and some people saw Devi's pedals hiss and most of the settings are unusable. Are these people just crusty old guitarists that think the Big Muff sound is all there is to fuzz? Whoops - sorry about the Shoegazer gaffe. The SM is a pretty good circuit, too. There are a lot of tone snobs who do get all butthurt if you try to get any guitar tone that isn't a replica of Gary Rossington's slide guitar in Freebird, but there is a degree of truth to the commentary. Some of Devi's pedals do make a lot of ambient noise, but not all of them. The other thing is that since they're all hand-made, no two sound identical. The Bit is actually nicely gated, so there's not a ton of noise when you aren't playing. Prior to getting my WMD Geiger Counter, I got some amazing 8-bit tones by running a Ruiner into the Bit (I don't much care for the Ruiner on its own, unfortunately). If you're looking at the Manglers, I got a Dream Mangler (Disaster Fuzz + VFM) a couple of months back, and it's kicked every fuzz aside from my custom DE twin (Ruiner + Bit) off my chain. I'd imagine that the Bit Mangler would be good fun as well.
|
# ? Aug 4, 2010 23:51 |
|
blue.eyed.ash posted:Fuzz stuff No biggie on the confusion, I don't know the difference between them anyway. I might be swayed into purchasing a shoe gazer or something if it really is that good, but I don't think I'm man enough to buy one of the three hundred dollar manglers as a "Babby's first fuzz." Also I just want to throw out there that I have pretty much zero experience with fuzz and really effects in general. I spent most of my time (years) playing my electric unplugged, but since I bought a Vox vt30 with a headphone jack I've been getting more into playing plugged in. I was using a metal zone for years and just recently picked up a DD-3 and a standard crybaby. I've pretty much just been enamored with the idea of getting crazy 8-bit sounds out of my guitar after seeing the bit. After checking devi's website I've realized I need fuzz in my life. Have you actually used a shoe gazer?
|
# ? Aug 5, 2010 03:47 |
|
Tsunami Redux posted:I read about the Fuzz Factory too; people say most of what you dial in is unusable noise and it takes a lot of tweaking to find something good. I have a hard time dialing in stuff on my Boss pedals with two knobs let alone this thing with five. Is it hard to use? (As a side note I did see someone pull off some good 8-bit sounds with one, which is cool.) It DOES take a lot of tweaking to find something distinctive and different. Dialing in something 'good' is as easy as following the generic setup guide (shows you where to put dials). I think it's an incredibly easy pedal to use, because once you have an idea of the sound you want, you start dialing it in. Each knob has a specific function, they DO play off each other, but seriously, if you want a 'fuzz' sound, it's in there.
|
# ? Aug 5, 2010 04:17 |
|
Can someone point me in the direction of a bass pedal that can replicate this sound? http://www.youtube.com/watch?v=-uA-jLrWaAs I know it isn't super unique, but it really appeals to me. It's muff-like, but I'm not sure what exactly has that sound but also retains the low end. The only fuzz-fuzz pedals I've owned are a Bass Big Muff and Devi Ever Shoegazer, and neither sounded quite like this...I wasn't really into the BBM and the SG isn't big on lows.
|
# ? Aug 5, 2010 09:32 |
|
Achtane posted:Can someone point me in the direction of a bass pedal that can replicate this sound? Maybe give this a try, I have my sights set on it myself http://wrenandcuff.com/site/the-stompboxes/the-pickle-pie-b/
|
# ? Aug 5, 2010 13:34 |
|
I could be hearing it wrong (crappy headphones at work) but it sounds to me more like a REALLY heavy overdrive from a tube bass amp rather than fuzz. And aside from buying a tube amp, the only way I've experienced getting great sounds like that is through the Tech 21 Character Series pedals: Oxford (Meant to emulate an Orange amp): https://www.youtube.com/watch?v=IgKLgKJQV_g At 0:31 Leeds (Meant to emulate a Hiwatt amp): https://www.youtube.com/watch?v=wiyqIh99P2Q At 0:43 VT Bass (Meant to emulate an Ampeg SVT and a B-25): https://www.youtube.com/watch?v=Xr8kdWpB3U4 Various parts throughout. This is the one I own.
|
# ? Aug 5, 2010 14:23 |
|
In my experience, you can actually get great bass overdrive sounds from the DOD 250 overdrive.
|
# ? Aug 5, 2010 14:55 |
|
Hmm...Pickle Pie B, possibly. I had a VT Bass and while it did make a mighty fine Ampeg sound, I decided that it wasn't needed and sold it. Now I kind of want it again. My favorite OD pedal on bass was my Way Huge Pork Loin, but I had to sell that to help pay bills. I might try out the Swollen Pickle or Fat Sandwich.
|
# ? Aug 8, 2010 23:07 |
|
Tsunami Redux posted:No biggie on the confusion, I don't know the difference between them anyway. I haven't personally used a Gazer, but I recommend it because it's the most recommended pedal every time someone pops onto Devi's board and asks where's a good place to start. I think a good ol' Big Muff is a perfectly acceptable first fuzz, too.
|
# ? Aug 9, 2010 19:27 |
|
|
# ? May 9, 2024 06:03 |
|
If you do buy a Shoe Gazer, don't do what I did and end up with an older model one because it was bought on Ebay. On the older models, the right side (Torn's Peaker?) can only be engaged if the left side is as well -- you can make it independent yourself, but its just easier to get a newer model which is independent by default.
|
# ? Aug 9, 2010 19:40 |