|
kronix posted:So I just got my call from the dealership, the Mustang just got delivered...a week early. Of course this is the week I'm in Europe so Congrats on the new 'stang!
|
# ? Oct 4, 2010 19:47 |
|
|
# ? May 10, 2024 00:27 |
|
Hooch302 posted:There's nothing wrong with corral.net. They're the right wing equivalent of everything else on the net that is so far left it comes back around full circle. Twice. Who are you? I never said the South sucks, and the military sucks for a lot of reasons, not being able to smoke pot being just about at the bottom of the list. The admins over there didn't ban me because they didn't like me, they banned me because I asked them to. Too many people took poo poo way too seriously so I had my account nuked and started over. Hell, I have plaques on my wall from a couple different Corral Days.
|
# ? Oct 4, 2010 20:30 |
|
frozenphil posted:Who are you? Nobody of any importance. I don't remember my log in name, tbh. I was mostly just loving with you. That said, the site really has gone downhill. I don't even think the technical sections are that good anymore.
|
# ? Oct 4, 2010 20:50 |
|
There's a reason I mentioned the classifieds specifically. For whatever reason everyone posts their ads on the corral. You'll see different ads posted on a dozen different sites that aren't on others, but they are always cross posted on the corral. Also, Chris Ihara is a dick.
|
# ? Oct 4, 2010 20:54 |
|
Yeah, I always got the stereotypical 'got the poo poo kicked out of me growing up so I'll be a COP and get my revenge!' twat vibe from him. After I sold my Mustangs, I quit visiting the site with any regularity. It's just so...
|
# ? Oct 4, 2010 21:10 |
|
Super excited for the weekend. Seafoaming with an oil change and then while im under there I am going to wire wheel some rust and then put my BBK O/R X pipe on and my LM2 Catback I just ordered
Henchman 21 fucked around with this message at 21:17 on Oct 4, 2010 |
# ? Oct 4, 2010 21:13 |
|
KickStand posted:Super excited for the weekend. Seafoaming with an oil change and then while im under there I am going to wire wheel some rust and then put my BBK O/R X pipe on and my LM2 Catback I just ordered Hope you have ear plugs. Those SLP exhausts are just about louder than open headers.
|
# ? Oct 4, 2010 21:19 |
|
I read (but not participate in) the Corner Carver Racing Tech Discussion subforum on s197forum. It's helped me pick out suspension components for occasional track use. It's how I found out about Koni yellows and how they would turn my 2008 from a choppy, bouncy oxcart into something that rode like a modern car.
|
# ? Oct 5, 2010 00:30 |
|
I can't support s197forum since they not only allow long time scammer SD Wheeler to post there, but actively ban anyone who speaks out against him. The dude has multiple accounts over there, with the full support of the s197forum admins, to pose as customers and offer words of praise for his "company". By way of offering corroborating evidence for my claims I offer these links. A google search for his name will also turn up many results as well, but it seems the big threads with all of the evidence, Gregg County, Texas warrants, and FBI warrants has gone missing from the corral. SD Wheeler's involvement with the Fun Ford Weekend racing series and their defense of him was a large reason that the series failed. No one wanted to support an organization that actively defended a known, wanted thief.
|
# ? Oct 5, 2010 01:33 |
|
Wow, didn't know that. I don't post there, I just read what road racers post about suspension setups. Got my Ground Control strut mounts in yesterday, still waiting on my set of Steeda Sports. Needed to replace my mounts because the left one started popping. The springs are for light track duty, and apparently they won't break my back around town despite being a bit lower. We'll see!
|
# ? Oct 5, 2010 01:58 |
|
So, what happens when you put a Procharger F1C on a 2011 GT with a built engine and mild suspension work? http://www.youtube.com/watch?v=PBtjVpBVbt8 Evolution's 2011 is getting ri-cock-ulous.
|
# ? Oct 5, 2010 02:00 |
|
KickStand posted:Super excited for the weekend. Seafoaming with an oil change and then while im under there I am going to wire wheel some rust and then put my BBK O/R X pipe on and my LM2 Catback I just ordered That sounds pretty close to my setup. I've got a Pypes O/R H pipe and their Pype Bomb resonator tip mufflers. I thought it was too loud when I put it on but my neighbors haven't complained yet and everyone that hears it has said it sounds good.
|
# ? Oct 5, 2010 02:38 |
|
frozenphil posted:So, what happens when you put a Procharger F1C on a 2011 GT with a built engine and mild suspension work? I was there. This is insane.
|
# ? Oct 5, 2010 02:53 |
|
frozenphil posted:Evolution's 2011 is getting ri-cock-ulous. Good. loving. Lord. I would hate to see the repair bill after that landing... Somebody needs to make @0:40 into a photo so I can replace my desktop background.
|
# ? Oct 5, 2010 04:19 |
|
oRenj9 posted:Good. loving. Lord. I would hate to see the repair bill after that landing... From here Too bad it's not bigger.
|
# ? Oct 5, 2010 04:31 |
|
oRenj9 posted:Good. loving. Lord. I would hate to see the repair bill after that landing... Apparently it was just the headers and oil pan that got fubared. I'm pretty sure Evo can get them at cost. Also, this is why the new Mustang is a retardedly good bang for the buck. quote:Feeling that the stock 5.0 was just about tapped out for what it would reliably make for power, Fred and the rest of the Evolution Performance crew yanked the engine out to make way for an upgraded short block. Since they were ditching the nitrous kit for a F-1C ProCharger, a set of low compression pistons and beefier rods were in order. Outside that, most of the engine remains relatively stock. They had previously ran a best quarter mile time of a 9.11 in testing with their new combination.
|
# ? Oct 5, 2010 04:47 |
|
Picked up the FRPP tune & K&N drop in filter today. It definitely feels as if there is more low end torque. I actually have issues not spinning the wheels taking off now. Also, the lack of skip shift is glorious. It does seem like there is more engine note in the cabin, which isn't a bad thing. A+
|
# ? Oct 5, 2010 05:27 |
|
Going to look at a bone stock '99 Cobra with 49,000 miles. Don't expect any surprises from looking at the pictures. Keeping fingers crossed...
|
# ? Oct 5, 2010 16:28 |
|
Hooch302 posted:Going to look at a bone stock '99 Cobra with 49,000 miles. Don't expect any surprises from looking at the pictures. You'll be the next Bob Cosby!
|
# ? Oct 5, 2010 16:36 |
|
Can you get a factory Mustang, black with red racing strips that isn't a Shelby? I'm hoping so, because the I don't want to see the repercussions if it turns out this guy was driving a 540+HP car. Everyone was talking about it today.
|
# ? Oct 6, 2010 02:45 |
|
oRenj9 posted:Can you get a factory Mustang, black with red racing strips that isn't a Shelby? I'm hoping so, because the I don't want to see the repercussions if it turns out this guy was driving a 540+HP car. Everyone was talking about it today. No, but vinyl stripes aren't exactly expensive or uncommon. What does it matter how much horsepower his car had? The v6 is plenty capable of going 130mph.
|
# ? Oct 6, 2010 02:51 |
|
frozenphil posted:No, but vinyl stripes aren't exactly expensive or uncommon. What does it matter how much horsepower his car had? The v6 is plenty capable of going 130mph. I know this; it's the public that I'm worried about.
|
# ? Oct 6, 2010 02:53 |
|
You're not going to change the public's perception of a vehicle that has been shaped for 46 years...
|
# ? Oct 6, 2010 03:01 |
|
oRenj9 posted:I know this; it's the public that I'm worried about. Then it doesn't matter if it was a four banger Fox body, people would still freak out about the "high powered Mustang sports car" that was speeding down the road and killed someone.
|
# ? Oct 6, 2010 03:19 |
|
Fake edit: wait no it says only one person was killed. Edit: so the dude's in the hospital in unspecified condition. gently caress him. Dick Burglar fucked around with this message at 09:18 on Oct 6, 2010 |
# ? Oct 6, 2010 09:15 |
|
You know what's retarded? This is retarded: http://www.youtube.com/watch?v=owc0KcDbj2Q 2011 5.0 automatic with the only mods being the FRPP Whipple supercharger kit at 5psi, 4.10 gears, and a tune. You can hear it pushing through the shifts because he has too much gear for the stock converter. The stock converter will also only flash to 1300RPM so there is a bunch left in it once he gets a new one.
|
# ? Oct 6, 2010 22:18 |
|
frozenphil posted:You can hear it pushing through the shifts because he has too much gear for the stock converter. The stock converter will also only flash to 1300RPM so there is a bunch left in it once he gets a new one. By "too much gear" do you mean the 4.10s are too... short(?) for the converter? And also what do you mean it will only flash to 1300RPM?
|
# ? Oct 6, 2010 22:57 |
|
CombatWombat posted:By "too much gear" do you mean the 4.10s are too... short(?) for the converter? And also what do you mean it will only flash to 1300RPM? Yeah, the 4.10s let the engine spin up too quickly and the transmission doesn't have enough time to get the next shift off before it hits the limiter. Converter flash is what happens when you go WOT from a dead stop. When you put your foot to the floor and launch you will briefly see the tach go up to a certain RPM before settling back down; that's called "flashing the converter". It's basically a measurement of stall speed. A heavier vehicle offers more resistance to forward motion and therefore requires a higher stall to get it to accelerate, but things like lower (higher numerical) gears can affect converter flash speed since the vehicle can accelerate easier. In a nutshell, in drag racing a higher stall usually means faster acceleration. There are hundreds of variables here, but that's the basics of it. Edit: I should add that most people confuse flash stall speed with brake stall speed. Brake stall speed is the point where the torque converter sends power to the transmission from the engine. When you're at the starting line and you keep one foot on the brake and the other eases into the gas until the rear tire spins, that's your brake stall speed. My '03 GT brake stalls at ~1500RPM and flashes to ~1800RPM when I launch. I imagine the guy in the video is referring to a brake stall of 1300RPM. frozenphil fucked around with this message at 00:33 on Oct 7, 2010 |
# ? Oct 7, 2010 00:25 |
|
frozenphil posted:Yeah, the 4.10s let the engine spin up too quickly and the transmission doesn't have enough time to get the next shift off before it hits the limiter. They should have just got one with a six-speed.
|
# ? Oct 7, 2010 00:34 |
|
Cyrezar posted:They should have just got one with a six-speed. The automatic in the 2011 Mustangs is a six speed. The automatics have also been posting faster 1/4 mile times, on average, than the manual transmissions.
|
# ? Oct 7, 2010 00:34 |
|
frozenphil posted:
Isn't that the way it usually is, being that autos can shift faster?
|
# ? Oct 7, 2010 01:03 |
|
scapulataf posted:Isn't that the way it usually is, being that autos can shift faster? Not stock, no. The higher amount of parasitic loss of the automatic usually makes them a couple tenths slower than a manual. The new auto is just really efficient.
|
# ? Oct 7, 2010 02:15 |
|
frozenphil posted:Not stock, no. The higher amount of parasitic loss of the automatic usually makes them a couple tenths slower than a manual. The new auto is just really efficient. Got ya. Hence the built autos that the serious draggers use, not just for handling the extra power.
|
# ? Oct 7, 2010 02:18 |
|
scapulataf posted:Got ya. Hence the built autos that the serious draggers use, not just for handling the extra power. Well, you also don't need gears you'll never see when you're living life a 1/4 mile at a time.
|
# ? Oct 7, 2010 02:45 |
|
scapulataf posted:Got ya. Hence the built autos that the serious draggers use, not just for handling the extra power.
|
# ? Oct 7, 2010 02:51 |
|
scapulataf posted:Got ya. Hence the built autos that the serious draggers use, not just for handling the extra power. No, a built transmission is pretty much only for handling the extra power. I know a dude with a built TH400 in his twin turbo Cobra that makes 900hp to the tire. He had a T56 before the TH400, everything else was the same, yet he put down right at 1100hp to the tire with the manual. The TH400 cost him 200hp, but he was nearly half a second quicker in the 1/4 mile. You either get efficient power delivery or you get decent power handling. The new automatic has proven to be efficient, now we're just waiting to see how much power it can reliably hold. So far it looks like 600rwhp and low 10 second ETs are pretty safe. It seems to be a drat good automatic.
|
# ? Oct 7, 2010 02:55 |
|
Yay! Just came in yesterday. Drove it home in the rain so I didnt really have a chance to let it trot yet.
|
# ? Oct 7, 2010 04:22 |
|
AtomicBomber posted:Yay! Good choice. This is my favorite color for the 2011s. White's pretty neat too, but white is also pretty boring.
|
# ? Oct 7, 2010 04:31 |
|
I went to a Ford dealer the other day to inquire about finding an '03-'04 Cobra convertible. After listening to this guy try to sell me an '07 GT instead and then ask me if I wanted the Cobra in stick or auto, I felt like this was a bad place to be at. I finished up giving him the information on the Cobra I want and left. I'm not sure if going there was the right move at all. Any other suggestions? Aren't there SVT certified dealers who specialize in this stuff?
|
# ? Oct 7, 2010 05:21 |
|
|
# ? May 10, 2024 00:27 |
|
AtomicBomber posted:Yay! Beat me to the punch, that's the exact car I'm going to pick up this afternoon Kona blue premium, 3.55's, and 19 inch wheels. Are those the 19 inchers? PS: You aren't in mass are you? That rain is the reason I didn't bother to go get it yesterday.
|
# ? Oct 7, 2010 13:07 |