|
_Dav posted:I usually park in gear, so roll up and kick the stand down to stop the engine and whatnot. Is this bad? What is the difference between stopping the bike by key compared to kickstand shutoff switch or kill switch? You won't harm it by stopping it with the stand switch. It does the same thing the kill switch does. Some bikes leave the fuel system off when the kill switch is off, and only primes when you turn the kill switch on, so if you're particular about startup procedure or something, killing it with the key or stand but not the switch is something to think about.
|
# ? Mar 28, 2012 17:42 |
|
|
# ? May 16, 2024 10:44 |
|
clutchpuck posted:You won't harm it by stopping it with the stand switch. It does the same thing the kill switch does. Some bikes kill the ECU with the kill switch, so...that's not an absolute. Check the manual, if it says you should kill the bike with the kill switch, you're probably fine, if it says you should use the key, use the key.
|
# ? Mar 28, 2012 17:44 |
|
What's a good way to sell a bike on something like craigslist and not get ripped off?
|
# ? Mar 28, 2012 18:06 |
|
On my old CL, as long as the key is on there's power going to the ignition system, and the coils get pretty hot after a while (plus the battery drains)
|
# ? Mar 28, 2012 18:09 |
|
Phy posted:Doesn't this go for any big single, though? The exhaust bolts on my KLR tried to work themselves off as well, and that was a pretty awesome bike otherwise. Is the Blast exceptionally vibey, even for a big single, or is it more the combination of the other lousy dynamics that gets it so much loathing? The Blast is vibey on a whole other level. It has no counterbalancer and will completely numb your hands in under an hour. Some of the later year Buell Blasts aren't as bad, but the early models had major issues due to vibration. If you look online they sell anti vibration mounts and parts aftermarket to help with it. I considered buying one new before I got the R1 but the overwhelming amount of issues that had been reported turned me off of it.
|
# ? Mar 28, 2012 18:15 |
|
lancemantis posted:What's a good way to sell a bike on something like craigslist and not get ripped off? List an ad, meet in person, only accept cash?
|
# ? Mar 28, 2012 18:21 |
Ponies ate my Bagel posted:The Blast is vibey on a whole other level. It has no counterbalancer and will completely numb your hands in under an hour. Some of the later year Buell Blasts aren't as bad, but the early models had major issues due to vibration. If you look online they sell anti vibration mounts and parts aftermarket to help with it. The vibration is really overstated, I just got back from a 6 hour round trip to Cincy and back. I feel fine, and my hands are good to go to type on a little Droid 4 keyboard. astrollinthepork fucked around with this message at 18:54 on Mar 28, 2012 |
|
# ? Mar 28, 2012 18:52 |
|
astrollinthepork posted:Cine, I justation and my a 6 hour round to to go got got back. I just got got got go got back. I justated, I just go go to got back froid back. The vibration is a 6 hand 4 keyboare Drour rom and my hand type vibrated, I fincy on is a 6 hour rom and back froid my overstation is roid 4 keyboare vibrated, I feel frounds a 6 hour round back from a 6 hand my on ard. The on is a 6 hounds and back. The Droid my ands re vibrated, and type Drom ands and back. I feel feel feel froid 4 keyboareally hand type What the gently caress? Could it be that your eyes are shaking at the same frequency as your hands?
|
# ? Mar 28, 2012 19:03 |
|
Ola posted:What the gently caress? Could it be that your eyes are shaking at the same frequency as your hands? That is the only reasonable explanation.
|
# ? Mar 28, 2012 19:18 |
What the gently caress? That's not what I typed at all. Must be the awful app.astrollinthepork posted:The vibration is really overstated, I just got back from a 6 hour round trip to Cincy. I feel fine, and my hands are good to go to type on a little Droid 4 keyboard. *edit* My post looks fine on the browser soooo
|
|
# ? Mar 28, 2012 19:32 |
|
astrollinthepork posted:What the gently caress? That's not what I typed at all. Must be the awful app. Hehe I pranked you with a gibberish generator.
|
# ? Mar 28, 2012 19:34 |
|
prankkkeeapppppllee
|
# ? Mar 28, 2012 19:41 |
Ola posted:Hehe I pranked you with a gibberish generator. Seriously though if your only experience with a blast is at an MSF course then you're really not experiencing what it's like when it's not lugging around at slightly above idle speed. My first thoughts upon riding it were "This is what people are complaining about?" It's fine. I don't recommend two up riding at all though. Good god my arms are tired.
|
|
# ? Mar 28, 2012 19:42 |
|
Ola posted:Hehe I pranked you with a gibberish generator. Oh you.
|
# ? Mar 28, 2012 20:14 |
|
Z3n posted:List an ad, meet in person, only accept cash? This is about what I was expecting I guess If they can get the money to pay any other way, they should be able to get the cash together. The only thing I would have to worry about is counterfeit bills lol I've just traded stuff in in the past just because it seemed easier than trying to find people with the money
|
# ? Mar 29, 2012 00:48 |
|
I sell stuff through CL constantly, Z3n is 100% correcto. Cash Only, no test rides without 100% cash in hand first. If they wreck it sign the pink, say have a nice day and let them deal with it. Go read up on counterfeit bills, they aren't usually hard to spot. I have actually called the secret service on a guy that gave me a counterfeit $20 that was an obvious counterfeit, got to meet a MiB and everything.
|
# ? Mar 29, 2012 00:51 |
|
Hey guys, how easy is it to swap rearsets? The OSF rearsets on my new SV650 are higher than the stock Naked rearsets. I know I definitely prefer the stockers for max comfort. If I got stock rearsets, what's the most difficult part of switching over?astrollinthepork posted:Cine, I justation and my a 6 hour round to to go got got back. I just got got got go got back. I justated, I just go go to got back froid back. The vibration is a 6 hand 4 keyboare Drour rom and my hand type vibrated, I fincy on is a 6 hour rom and back froid my overstation is roid 4 keyboare vibrated, I feel frounds a 6 hour round back from a 6 hand my on ard. The on is a 6 hounds and back. The Droid my ands re vibrated, and type Drom ands and back. I feel feel feel froid 4 keyboareally hand type Android. had that poo poo for a year, switched back to iOS, never lookin' back. the walkin dude fucked around with this message at 17:48 on Mar 29, 2012 |
# ? Mar 29, 2012 17:46 |
|
the walkin dude posted:Hey guys, how easy is it to swap rearsets? The OSF rearsets on my new SV650 are higher than the stock Naked rearsets. I know I definitely prefer the stockers for max comfort. If I got stock rearsets, what's the most difficult part of switching over? Pretty easy, two screws to pull it off the bike. Might need to transfer foot pegs over, adjust brake light sensor and get all the controls set up to your liking. I have a set of stock gen 1 rearsets, need to see if they are n or s, and would be interested in your OSF ones.
|
# ? Mar 29, 2012 17:55 |
|
the walkin dude posted:Android. had that poo poo for a year, switched back to iOS, never lookin' back. Hey, lay off astrollinthepork and the mobile OS! I need to stand up for the wrongs I do. I fake quoted, his edit is just a coincidence.
|
# ? Mar 29, 2012 18:32 |
|
I have a galaxy tab and an iPhone. I haven't turned the Tab on in almost 4 months. It's just so clunky...
|
# ? Mar 29, 2012 18:53 |
|
Ponies ate my Bagel posted:I have a galaxy tab and an iPhone. I haven't turned the Tab on in almost 4 months. It's just so clunky... Yea, all that available customization is such a load.
|
# ? Mar 29, 2012 19:00 |
|
Loud widgets save lives.
|
# ? Mar 29, 2012 19:04 |
|
orthod0ks posted:Yea, all that available customization is such a load. Mines hacked and has ICS on it, but there's small niggles that annoy me to no end. It's hard to beat how the iPhone just works all the time and never gives me any issues. Dumb question; If you have a bike with a kick start can you disconnect the battery entirely and run it without one by kicking it?
|
# ? Mar 29, 2012 19:07 |
|
The DRZ can run without a battery: http://www.thumpertalk.com/topic/317250-dead-battery-kick-startdead-as-well/ Most people put a capacitor or very small battery in there for whatever reason.
|
# ? Mar 29, 2012 19:27 |
|
MotoMind posted:The DRZ can run without a battery: http://www.thumpertalk.com/topic/317250-dead-battery-kick-startdead-as-well/ Was actually thinking about removing the batter from my Honda, it has a kicker and I don't think I'd like how it would look naked with where I'd have to mount it.
|
# ? Mar 29, 2012 19:29 |
|
Ponies ate my Bagel posted:Dumb question; If you have a bike with a kick start can you disconnect the battery entirely and run it without one by kicking it? I think that would depend on how powerful the alternator is and how good a job the rectifier does smoothing the output. For instance if you have a lovely half-bridge then there could be a 50% chance your plug won't fire on a given stroke, depending on the holdup of the coils etc. Are you talking about removing the battery on the CM200? I would really check the alternator output first because otherwise you might find that your spark quits when you sound the horn something. Check the voltage and current, and get a buddy with an oscilloscope to check the waveform. A supercap like Motomind says would help a lot if your waveform is dirty, but it's not really going to save you if the alternator is just too weak to power everything at once and is relying on the battery for transients.
|
# ? Mar 29, 2012 19:34 |
|
Ponies ate my Bagel posted:Was actually thinking about removing the batter from my Honda, it has a kicker and I don't think I'd like how it would look naked with where I'd have to mount it. I am trying to visualize what kind of batter you'd have mounted in a naked Honda and I'm just not quite sure what to make of that. Sagebrush got the answer.
|
# ? Mar 29, 2012 19:37 |
|
Ponies ate my Bagel posted:
Isn't it needed to complete the circuit?
|
# ? Mar 29, 2012 19:45 |
|
Ola posted:Isn't it needed to complete the circuit? Not sure I follow. If I put a battery charger on a battery, I go pos to pos and neg to neg, and if I put a draw I go pos to pos and neg to neg. If I remove the battery but leave the leads connected, I can still operate the draw device assuming the charger is producing sufficient output.
|
# ? Mar 29, 2012 19:56 |
|
MotoMind posted:Not sure I follow. If I put a battery charger on a battery, I go pos to pos and neg to neg, and if I put a draw I go pos to pos and neg to neg. If I remove the battery but leave the leads connected, I can still operate the draw device assuming the charger is producing sufficient output. Kinda like this? http://www.youtube.com/watch?v=KvRMptdaqOk&feature=youtu.be
|
# ? Mar 29, 2012 20:00 |
|
That's really funny but I was thinking of a charger like one that's plugged into the wall, just for the purposes of the example.
|
# ? Mar 29, 2012 20:05 |
|
MotoMind posted:Not sure I follow. If I put a battery charger on a battery, I go pos to pos and neg to neg, and if I put a draw I go pos to pos and neg to neg. If I remove the battery but leave the leads connected, I can still operate the draw device assuming the charger is producing sufficient output. I'm confident I don't follow. What I meant was...if you disconnect the battery, you've disconnected the bit the alternator feeds current to. Or have you? I still agnostic on electricity.
|
# ? Mar 29, 2012 20:09 |
|
Ola posted:I'm confident I don't follow. Imagine taking a garage charger and hooking it up to your battery, then hooking up a headlight to the battery. Then imagine removing the battery but leaving the bolts through the leads you used to hook things up to the terminals. poo poo still works if the charger can keep up and produce a good waveform. code:
MotoMind fucked around with this message at 20:13 on Mar 29, 2012 |
# ? Mar 29, 2012 20:11 |
|
I seem to remember a quick way to check if your car alternator is working is to disconnect a battery post while its running and see if it dies.
|
# ? Mar 29, 2012 20:18 |
|
If you look at the alternator as the power source, and the coils/lamps/etc as the load, the battery is as a storage unit connected in parallel with the load. When the alternator voltage is lower than that of the battery, the battery discharges into the lamps; when the alternator is higher, it charges the battery. Diodes (incorporated into the rectifier) prevent the battery from discharging into the alternator coils. So when you take the battery out, assuming you leave all the battery connectors attached as they would be if there were a battery in the middle (ie: all the grounds that come back to the negative post still need to be tied together), you just have a series circuit between the alternator and the load, with no backup. Problems occur when the electrical system is relying on the battery to be there for load smoothing and temporary overdraw situations. It really does all depend on how good the alternator is, though. You might have the aforementioned problem where honking the horn makes your spark cut out, or you might find that with the headlights on your bike can't idle because the alternator only produces enough power to run the lamps and the ignition at 3000RPM+ and it was relying on the battery to keep the ignition running for those situations. Etc.
|
# ? Mar 29, 2012 21:20 |
|
Meh, maybe I'll just look for a smaller "mini" battery to hide up in the seat pan or something. I want it to look really clean.
|
# ? Mar 29, 2012 21:31 |
|
Should be easy enough to wire a set of those A123 cells in to the base of a minimalist seat.
|
# ? Mar 29, 2012 21:46 |
|
Z3n posted:Should be easy enough to wire a set of those A123 cells in to the base of a minimalist seat. Lithium battery chemistries really should have proper battery management. Not sure how a naked A123 would take to being hooked up to a bike's stator. However, there are plenty of packs out there built for motorcycle use: http://shop.testsycl.com/
|
# ? Mar 29, 2012 21:59 |
|
MotoMind posted:Lithium battery chemistries really should have proper battery management. Not sure how a naked A123 would take to being hooked up to a bike's stator. However, there are plenty of packs out there built for motorcycle use: http://shop.testsycl.com/ I had one of those off a friends race bike, assumed it was just a bunch of A123 cells together, cause it didn't seem like there was space for anything else in the package. But you are right, more research than listening to me should be done
|
# ? Mar 29, 2012 22:09 |
|
|
# ? May 16, 2024 10:44 |
|
Z3n posted:I had one of those off a friends race bike, assumed it was just a bunch of A123 cells together, cause it didn't seem like there was space for anything else in the package. But you are right, more research than listening to me should be done No, you're right. I was expecting a PCB in there, but after looking around I don't see any evidence that the pack manufacturers are using any kind of voltage cutoffs or intelligence. Looks like they throw all the battery management in their external chargers. How they expect the batteries to really last in a motorcycle charging system, I do not know. So go right ahead I guess, just be careful on an old bike since it could easily kill the battery if you let it drain.
|
# ? Mar 29, 2012 22:36 |