|
Does anyone have an old 2gb stick from their N40L they're looking to sell? I just picked up one up on Craigslist for cheap and am looking to upgrade the ram.
|
# ? Jun 27, 2012 16:24 |
|
|
# ? May 9, 2024 21:12 |
|
You're talking about that ECC UDIMM right? I'm taking my 2GB and 1GB (Newegg gave me one) UDIMMs and replacing them with standard DDR3 spares. 2GB was what was on my N36LFISHMANPET posted:So, if I boot into single user mode or something (Solaris Express) will ZFS resliver the first vdev even though the second vdev would be missing completely?
|
# ? Jun 27, 2012 17:11 |
|
necrobobsledder posted:You're talking about that ECC UDIMM right? I'm taking my 2GB and 1GB (Newegg gave me one) UDIMMs and replacing them with standard DDR3 spares. 2GB was what was on my N36L Yeah, I was going to pick up a 2gb stick or 4gb kit but figured someone probably has already upgraded and I might as well pick up another ECC chip.
|
# ? Jun 27, 2012 17:28 |
|
Krakkles posted:Is there any good reason to do this over a DNS-343? I'm just looking at both and the 343 is cheaper and less work. I've had both the DNS-321 and DNS-323, and they certainly work, but performance is poo poo, even over the GB connections. 10MB/sec on great days (gigabit network). In comparison, my N40L running WHS2011 gets about 80MB/sec, with drives I pulled out of my DNS-323. Consider that I bought my N40L for around $200, and WHS2011 keeps going on sale for $30 (if you don't want to do freenas, etc). The Dlink boxes are certainly functional, and easy to set up, but LAN performance is lousy. As for what drives to use, get what's cheap. Green drives are fine for this type of use.
|
# ? Jun 27, 2012 17:39 |
|
FCKGW posted:Does anyone have an old 2gb stick from their N40L they're looking to sell? I just picked up one up on Craigslist for cheap and am looking to upgrade the ram. I'll sell you the RAM, I'm in the UK though. It's fresh in the machine as I haven't used my N40L yet. PM me if $20 plus free p+p sounds ok or maybe we can haggle or w/e. DEAD MAN'S SHOE fucked around with this message at 19:19 on Jun 27, 2012 |
# ? Jun 27, 2012 19:11 |
|
necrobobsledder posted:Not sure if I could even guess at this behavior without knowing the layout of the vdevs (are they in the same zpool? RAIDZ1,Z2,Z3?). Attempting a resilver and discovering an error on an existing device in a vdev when the vdev is already degraded would take the vdev offline I believe, so that's a risk. Resilvering is certainly possible for RAIDZ2 with the loss of two drives though with the risk of failure during resilver being approximately the same as a RAIDZ1 that's lost one device. Multiple parity levels means there's more than one state of degradation possible, and because ZFS won't wait around until both levels of parity are gone to begin resilvering, replacing one offline device should cause ZFS to start resilvering. What I'm not sure about is what ZFS will do if you have a RAIDZ2 with 2 faults, replace one, then during that resilver replace another (not sure if it'll start the resilver over or just wait for it to finish, for example). So this is my layout (approximate, since I can't copy paste from a turned off server) code:
What I'm wondering is if I pulled all the disks from the second vdev, disk6-disk10, would ZFS still be able to resliver the disks from the first raidz (let's say it's disk2 and disk3 that are bad). So I would remove disks6-disk10, and that vdev would be completely gone, then stick in two new disks (disk11 and disk12) and do 'zpool storage replace disk2 disk11' and 'zpool storage replace disk3 disk12'. Maybe only doing one disk at a time would be better, not sure.
|
# ? Jun 27, 2012 21:49 |
|
Civil posted:I've had both the DNS-321 and DNS-323, and they certainly work, but performance is poo poo, even over the GB connections. 10MB/sec on great days (gigabit network). In comparison, my N40L running WHS2011 gets about 80MB/sec, with drives I pulled out of my DNS-323.
|
# ? Jun 28, 2012 02:05 |
|
Alright, what the hell. Smartd is completely disagreeing with zpool status. I want to replace a failed disk with a new disk I stuck in, but I have no idea what disk is what. According to SMART, c7t2d0 is the new (2tb) drive I just put in to replace a failed 1.5 TB drive, but according to zpool status, c7t2d0 is in my vdev full of 750 GB devices, and c7t4d0 is the only unused drive, but SMART says that's one of the 750GB drives. So, what the hell?
|
# ? Jun 28, 2012 03:04 |
|
They periodically go on sale on Amazon or NewEgg for decent prices, and if you poke around eBay patiently you'll see new ones going for <$250 with free/cheap shipping. Just gotta catch the deals.
|
# ? Jun 28, 2012 03:05 |
|
Krakkles posted:Ok, sounds like good points. Where on earth did you find one for $200? I'm looking and finding nothing less than ~$350. Well, Ebay has it for $255.xx +$129 shipping Checked receipt, it was $180 @ PC Connection Express. But yeah, I've also seen Newegg carry it for around $200. If you're not in a hurry, RSS some deal sites and you'll save some scratch. I assume you've given up on the D-link appliance. Good move.
|
# ? Jun 28, 2012 05:21 |
|
Krakkles posted:Ok, sounds like good points. Where on earth did you find one for $200? I'm looking and finding nothing less than ~$350. Well, Ebay has it for $255.xx +$129 shipping Set up a camelx3 alert, they go on sale a lot. I got mine from Newegg for $200.
|
# ? Jun 28, 2012 15:43 |
|
I want to get a NAS with at least 4 bays - NCIX has the Thecus N4100EVO on for a good price, but I'm "worried" (really I have no idea) about the 600mhz processor. Does that mean it's going to be dog-slow compared to say a Synology DS212J with a 1.6ghz processor? I want to be able to stream media (up to 1080 stuff if possible) off this so some small amount of throughput is required - i.e. the 10mb/s from the DLink poo poo mentioned above would be unacceptable, even for just backup purposes.
|
# ? Jun 28, 2012 18:01 |
|
I'd go with Synology just for the 3rd party app support. I know it's alittle more expensive, but the DSM interface really makes it worth it.
|
# ? Jun 28, 2012 19:42 |
|
It may be a little slow for streaming very large files. Its overall performance is, quite frankly, pretty bad compared to other options: http://uk.hardware.info/reviews/2744/5/thecus-n4100evo-review-four-bays-for-a-good-price-performance---1-disk-intel-naspt. Also note that the DS212J is only a 2-bay NAS; you'll have to pay substantially more to get a 4-bay Synology. Your best bet for a 4-bay NAS that performs well but doesn't break the bank may be waiting for an eBay deal on a N40L.
|
# ? Jun 29, 2012 01:33 |
|
I seem to have encountered a weird issue on my new NAS (N40L running FreeNAS-8.0.4-RELEASE-p3-x64 , 8GB RAM) I have 4x2TB disks in a raid-z configuration, it seems that after moving from a Fast Ethernet switch to a gigE switch, file transfers stop/stall after about 30 seconds or so. The GUI and SSH seems to stay responsive. I can't seem to find any errors, any ideas? Can the N40L not handle gigE speeds? I get about 80MB/s until it stops.
|
# ? Jun 29, 2012 03:53 |
|
Isn't the nic driver infamous for doing this?
|
# ? Jun 29, 2012 11:23 |
|
I'd heard something to that effect, I've been running an Intel NIC since day one. In other news, I just lost a drive after only 3 weeks of operation (Well, NAS operation anyway. Its the sole repurposed drive). Not sure if it was because it's in the 5.25" bay (heat?), because I packed it in my luggage on a flight from Vancouver to Sydney, the fact that I kernel panicked my machine loving around with the plugin jail, or just dumb luck. Running degraded until morning. :/ Still, ZFS to the rescue. Again. edit: Well it wasn't the temperature. Replacement drive in the same bay running at 31'C. frumpsnake fucked around with this message at 05:28 on Jun 30, 2012 |
# ? Jun 29, 2012 13:16 |
I've posted about that very issue at least 5 separate times in this thread, I think. Yes, the bge driver on FreeBSD for this particular NIC has a bug. Just buy a cheap low-profile single-/dual-port pci-express x1-x4 NIC that's listed on the FreeBSD em NIC driver manpage - All of those are Intel NICs that are fully supported with the em NIC driver, so it's just a question of finding one that fits the above-listed specs. Alternatively, HP has a parts number 503746-B21 NIC that's sold as an accessory to both the N36L and N40L.
BlankSystemDaemon fucked around with this message at 14:04 on Jun 29, 2012 |
|
# ? Jun 29, 2012 14:00 |
|
D. Ebdrup posted:I've posted about that very issue at least 5 separate times in this thread, I think. Yes, the bge driver on FreeBSD for this particular NIC has a bug. Just buy a cheap low-profile single-/dual-port pci-express x1-x4 NIC that's listed on the FreeBSD em NIC driver manpage - All of those are Intel NICs that are fully supported with the em NIC driver, so it's just a question of finding one that fits the above-listed specs. Alternatively, HP has a parts number 503746-B21 NIC that's sold as an accessory to both the N36L and N40L. Thanks a lot, I picked up the EXPI9301CT from newegg based on your information.
|
# ? Jun 29, 2012 15:05 |
|
DrDork posted:It may be a little slow for streaming very large files. Its overall performance is, quite frankly, pretty bad compared to other options: http://uk.hardware.info/reviews/2744/5/thecus-n4100evo-review-four-bays-for-a-good-price-performance---1-disk-intel-naspt. Also note that the DS212J is only a 2-bay NAS; you'll have to pay substantially more to get a 4-bay Synology. Your best bet for a 4-bay NAS that performs well but doesn't break the bank may be waiting for an eBay deal on a N40L. Thanks for the advice, I'll spend the extra on a DS411 or DS411J. N40L's are hard to find cheaply in Canada, and I'd rather a more turn-key solution. mik fucked around with this message at 21:36 on Jun 29, 2012 |
# ? Jun 29, 2012 21:33 |
|
Is there anything like the N40L with an e3-1200v2 yet?
|
# ? Jun 29, 2012 22:43 |
|
Iomega has one but it's a rackmount and costing $7500 it's not really for home budgets: http://arstechnica.com/information-technology/2012/05/iomegas-new-xeon-packing-nas-does-more-than-store-data/ However, there's something a lot cheaper but still a bit extravagant by Acer: http://www.legitreviews.com/news/12933/
|
# ? Jun 30, 2012 00:19 |
Holy poo poo Iomega is still around? Pretty sure I still have my zip drive somewhere around here...
|
|
# ? Jun 30, 2012 01:04 |
|
I am finishing up a FreeNAS box and now I need to decide if I am going to use NFS or SMB to share my files. The problem is the first google result I found says that he measured NFS speeds at 70MB/s compared to SMB speeds of 20MB/s on his network. I have a few PCs that will connect to my file server- my primary PC runs Win 7 Ultimate, my other PCs are a Linux desktop, Macbook, Win 7 Premium laptop, and a Netbook (Win 7 starter lol). Pretty sure the laptop and netbook are the only two that will require help to connect to the file server. Will my life be more difficult if I go with NFS? If I need 3rd party software connect my netbook to my files, what should I use?
|
# ? Jun 30, 2012 14:59 |
|
Colonel Sanders posted:I am finishing up a FreeNAS box and now I need to decide if I am going to use NFS or SMB to share my files. The problem is the first google result I found says that he measured NFS speeds at 70MB/s compared to SMB speeds of 20MB/s on his network. Only Windows 7 Ultimate and Enterprise natively support NFS so your netbook and laptop will need 3rd party software. You could however, just enable all 3 protocols considering you have all 3 operating systems. edit: also, if he's getting 20MB/s over SMB then something is wrong. I have two nics link aggregated and if I open up two streams I see around 150-155ish MB/s
|
# ? Jun 30, 2012 15:11 |
|
I did not know that I could share the same folder with multiple protocols. Regardless, I cant justify setting up AFP for my Macbook because I rarely ever use the Macbook, and I'm sure it will connect to either SMB or NFS just fine.
|
# ? Jun 30, 2012 19:38 |
Colonel Sanders posted:I did not know that I could share the same folder with multiple protocols. Regardless, I cant justify setting up AFP for my Macbook because I rarely ever use the Macbook, and I'm sure it will connect to either SMB or NFS just fine. If I had a mac only network I'd do AFP and if it was n*x only I'd do NFS - but if it's a mixed enviroment, SMB is the way to go.
|
|
# ? Jun 30, 2012 19:47 |
|
What would be the disadvantages of using an old Athlon x2 250 system as a double duty HTPC/NAS? I would most likely just throw windows 7 on there, network share the folders and run Playstation media server. My board does allow Raid but I probably wouldn't use it at first. My primary goal is just media sharing but I figure doing manual file backups would be easy as well.
|
# ? Jul 1, 2012 10:03 |
|
Hello NAS goons! I finally got a Raspberry Pi on order - is there a commonly accepted way to set one up with a hard drive connected to its USB port as a simple file server? I want to play with the Pi but don't want the size or electricity footprint of an old PC set up with FreeNAS or an equivalent.
|
# ? Jul 1, 2012 12:55 |
|
Install samba, profit?
|
# ? Jul 1, 2012 15:15 |
|
Thanks, I'll look into that!
|
# ? Jul 1, 2012 15:22 |
|
krushgroove posted:Thanks, I'll look into that! So poo poo'll be slow 8/ If I were to build one from an embedded board I don't think it'd fit in a $35 budget (probably something like a ULP i3). evil_bunnY fucked around with this message at 15:35 on Jul 1, 2012 |
# ? Jul 1, 2012 15:32 |
|
I'm going to be doing a series of reviews on a large number of roll-your-own NAS operating systems. I got some of the methodology written, which you can find here (Google Docs). This is fairly basic at the moment and I'm open to input. I'm trying to think of more operating systems to test, tests to run, or different scenarios to test with. thideras fucked around with this message at 23:54 on Jul 1, 2012 |
# ? Jul 1, 2012 23:51 |
|
thideras posted:I'm going to be doing a series of reviews on a large number of roll-your-own NAS operating systems. I got some of the methodology written, which you can find here (Google Docs). This is fairly basic at the moment and I'm open to input. might be worth noting that Nas4Free has supplanted FreeNAS and is based on FreeBSD 9.0 instead of FreeBSD 7.3. I don't think there will be any future development on FreeNAS, they've even canned their forums and such.
|
# ? Jul 2, 2012 00:56 |
|
Telex posted:might be worth noting that Nas4Free has supplanted FreeNAS and is based on FreeBSD 9.0 instead of FreeBSD 7.3.
|
# ? Jul 2, 2012 00:57 |
|
What? FreeNAS 8.0.4-RELEASE-p3 and 8.2.0-BETA4 both came out 3 weeks ago and the forums are plenty active? The upgrade from FreeBSD 8.2 to 9.x with ZFSv28 is happening in in FreeNAS 8.3 once 8.2 leaves beta. (That's not to say NAS4Free isn't making huge strides...) frumpsnake fucked around with this message at 01:13 on Jul 2, 2012 |
# ? Jul 2, 2012 01:03 |
|
Telex posted:might be worth noting that Nas4Free has supplanted FreeNAS and is based on FreeBSD 9.0 instead of FreeBSD 7.3. Edit: I'm not trying to jump on you, I just really want to know if there's official word that dev has stopped on freenas. Because if so I'll need to research how to switch. g0del fucked around with this message at 01:20 on Jul 2, 2012 |
# ? Jul 2, 2012 01:18 |
|
Would someone mind taking a look at this build for a 12TB (with raidz2) FreeNAS setup? Thanks in advance! http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=20731586
|
# ? Jul 2, 2012 01:20 |
|
frumpsnake posted:What? FreeNAS 8.0.4-RELEASE-p3 and 8.2.0-BETA4 both came out 3 weeks ago and the forums are plenty active? The upgrade from FreeBSD 8.2 to 9.x with ZFSv28 is happening in in FreeNAS 8.3 once 8.2 leaves beta. Okay, sorry I'm being confusing. 7 is dead, the forums are going away Sept 1. http://sourceforge.net/apps/phpbb/freenas/viewtopic.php?f=5&t=13154 The people who did 7 are doing Nas4Free, since having two versions of FreeNAS are quite obviously confusing as all hell. 8 is still going as FreeNAS, but honestly I thought the shift to embedded only was a pretty lovely move and I changed back to 7 after it looked to be a huge honking pain in the rear end to get everything that was working just fine in 7 to work the same in 8. If 8 is your thing, cool. Now that's the only FreeNAS around.
|
# ? Jul 2, 2012 01:30 |
|
|
# ? May 9, 2024 21:12 |
|
Nostrum posted:Would someone mind taking a look at this build for a 12TB (with raidz2) FreeNAS setup? Thanks in advance! Why get an addon NIC when the board comes with one? I would shop around on the hard drives. If you don't mind buying used, you can get some pretty good deals. In the past two weeks, I purchased ten 750gb Seagate drives ($30/e) and eight 1.5tb Seagate drives ($47.5/e).
|
# ? Jul 2, 2012 01:31 |