|
ejstheman posted:I don't have a native ASIO driver for my sound chip. I tried the ASIO4ALL wrapper but got nowhere. I can't hear the test tone at all from the audio tab of Ableton's config screen, when ASIO4ALL is selected. I don't know what WASAPI is. A couple of things to try: 1) a quick google for "asio4all realtek spdif" shows that a bunch of people have had issues getting the digital output to work with ASIO4ALL. You might want to do a little reading and poke around in the driver settings. 2) if that doesn't help, try asio4all with the analog line out on your sound card.
|
# ? Jun 29, 2012 05:29 |
|
|
# ? Jun 10, 2024 11:22 |
|
h_double posted:A couple of things to try: I'm using a generic driver from Microsoft that doesn't (as far as I know) have any user-adjustable settings. I'll definitely try the line-out thing when I get home from work, though. Edit: Well actually I won't do that because my house doesn't have power, but hopefully I'll do it soon. ejstheman fucked around with this message at 00:09 on Jul 3, 2012 |
# ? Jun 29, 2012 22:13 |
|
...
colonp fucked around with this message at 18:11 on Mar 8, 2014 |
# ? Jul 4, 2012 15:25 |
|
Not jumping on the beta yet because I need my M4L, but this is awesome news.
|
# ? Jul 4, 2012 15:32 |
|
I have a Moog Expression Pedal plugged into the back of my Axiom 25 (1st edition) and the response is super jumpy. I've tried switching the Takeover Mode in the settings, but it's almost the same for each mode. Any idea how to remedy this?
|
# ? Jul 8, 2012 23:39 |
|
Dudes, I've been annoyed with the lack of support for video clips in Session view. Then I remembered The Bridge! It turns Serato Video into a video player with effects and everything, that is tempo-synced to Live if the video file is tagged with the BPM. It's rad as gently caress, and has worked flawlessly so far. The only caveat is that it requires an SSL interface to be connected like a huge dongle, and the whole thing crashes if it gets unplugged. Heh heh. I really wish Serato would make something like video-only thing work with The Bridge as long as it's synced to Live.
|
# ? Jul 9, 2012 00:40 |
|
vas0line posted:Dudes, As a Novation Twitch/Serato Itch user, I'd really like to see the Itch support for Bridge that Serato has mentioned in the past.
|
# ? Jul 9, 2012 00:49 |
|
I finally got an apc40 and jesus is this wonderful. It is amazing how easy ableton is to navigate. My process with my production buddy has sped up by probably 40 percent. We are getting work done. YAR!!!!!!!!!
|
# ? Jul 13, 2012 07:19 |
|
I cannot, for the life of me, get my Axiom 25 to work with Ableton. I have the control surface on axiom direct link, input and output on axiom25. I also have the track and remote set to ON for axiom directlink input, midiin2, and midiin3. The axiom is on, drivers installed, but no detection or functionality in ableton at all.
|
# ? Jul 14, 2012 18:17 |
|
I want to control separate things with my midi controller's pads and keyboard. At the moment, I accidentally trigger functions I've mapped to my pads by playing the keyboard, as they both control the same midi notes. Is there any way to separate them? Popcorn fucked around with this message at 15:15 on Jul 15, 2012 |
# ? Jul 15, 2012 15:12 |
|
...
colonp fucked around with this message at 18:11 on Mar 8, 2014 |
# ? Jul 15, 2012 18:52 |
|
How do I do that? I have absolutely no idea!
|
# ? Jul 15, 2012 18:57 |
|
...
colonp fucked around with this message at 18:11 on Mar 8, 2014 |
# ? Jul 15, 2012 19:05 |
|
Kind of upset that I missed the sale for upgrading... Guess I'll just stick to lite for a while.
|
# ? Jul 15, 2012 21:47 |
|
Does anybody know if it's possible to use an old Yamaha PSR-500 keyboard as a midi keyboard in Ableton? It's got two MIDI ports so I gather that I can just buy an adaptor?
|
# ? Jul 15, 2012 22:09 |
|
MixMasterMalaria posted:Does anybody know if it's possible to use an old Yamaha PSR-500 keyboard as a midi keyboard in Ableton? It's got two MIDI ports so I gather that I can just buy an adaptor? Yep, just get a MIDI-USB adapter and you're away.
|
# ? Jul 15, 2012 23:44 |
|
Played my first live show with Live and Guitar Rig. Yeah thats a PC keyboard with most of the keys ripped off. To get a general idea of what I was getting at here's the keymap Basically a Guitar Rig sent to four Loopers, with some drums to back it up. The MIDI channel sends notes to Guitar Rig for program changes and function switches. Tons of fun, buying a FCB1010 and a real control surface ASAP.
|
# ? Jul 16, 2012 02:05 |
|
Whoa, are you using a PC keyboard as a foot pedal? That rules. Rock n roll. How does it work?
|
# ? Jul 16, 2012 17:07 |
|
Popcorn posted:Whoa, are you using a PC keyboard as a foot pedal? That rules. Rock n roll. How does it work? It's all just Live keybinds. On the numeric pad, I left 2 and 9 on, which are bound to those top two MIDI clips. Those are non looping non quantized clips that just send short single eighth notes of different pitches to Guitar Rig. GR then uses these for the "previous/next" patch. The next 4 are bound to 2, 5, 8 and = , and send different notes to GR, to individually toggle components of GR. ie, on my 'clean bass' patch, the buttons are: -Graphic EQ toggle -Ultra low toggle -Reverb input mute -Chorus on/off whereas on my "dirty bass" patch, the buttons are: -Graphic EQ toggle -Drive toggle (goes between two preset levels) -Flanger on/off -Octaver on/off That's the GR side. For the Loopers, I have bound z,c,b,m to the big Looper multifunctional button. I also bound those to just click on the track name to bring that Looper to the front. I kept the Caps Lock key on, and that is because i bound Z,C,B,M to solo for each of the Loopers. Other than that, the qwerty row is bound all the way across for 'backing drums' and patterns, and the asdfg row to my main breaks. There are beat repeat toggles and tweaks on this row, too. I figured that I could take my hands off the bass for a second to twiddle drums, so just trigger those from the keyboard.
|
# ? Jul 16, 2012 17:48 |
|
Bitwig is in beta. Just got an email saying invites are going out. They should have some updated videos on their site, too.
|
# ? Jul 16, 2012 19:23 |
|
Kinda stuck on this one... I'm the new proud papa of an Analogue Solutions Leipzig-S, which is a hardware synth with its own step sequencer and ver basic MIDI. I can get signal in/out of Ableton without a hitch, and I can get it to stop and start when the DAW runs, but it won't set itself back to the first step when this happens... I have to manually step through to get it back in time before I start the playback. Does anyone know of a way to send a MIDI command out to set a stepper back to the first position? Thanks!
|
# ? Jul 18, 2012 16:34 |
|
magiccarpet posted:Kinda stuck on this one... That thing looks weird and neat! I found this: "Sequencer reset is handled via accent (or using heavy velocity on a MIDI note)." in a press release. Can't find any more details quite yet.
|
# ? Jul 18, 2012 17:27 |
|
magiccarpet posted:Kinda stuck on this one... Well, according to the manual, the MIDI is really basic. It looks like you may be able to do this in a roundabout way. Set the sync source to MIDI-sync (starts when your DAW runs, stops when DAW stops). Flip the Reset toggle down to ACC and create a MIDI scene that has a MIDI note with a velocity over 80 on the first step where you want it to reset. You can duplicate this scene in the arrange window or just have it loop. It should reset the sequencer to step 1 every time the note fires. You could make some cool patterns with this as well. I hope that's at all helpful.
|
# ? Jul 18, 2012 17:28 |
|
I could easily be wrong, but when I was last Thus my intended usage pattern with it would/will be to step it by sending MIDI notes, with the first in a sequence having sufficient velocity to reset it to the first stage. This means that shuffle, syncopation and other interesting sequence modulations can occur by easily re-arranging the MIDI triggers inside Live. If you're truly stuck then just contact AS directly: Tom Carpenter's a swell guy and really helpful.
|
# ? Jul 18, 2012 17:30 |
|
Cool, thanks for the help guys. I'll give it a shot tonight and see what I come up with, but it does seem that MIDI velocity bit will do the trick. And yes, it sounds crazy and awesome. I've wanted it since it was first announced and finally bit the bullet. The first time I turned it on and screwed with some knobs I had essentially recreated Pinion by NIN. Which is exactly what it should be doing.
|
# ? Jul 18, 2012 20:37 |
|
magiccarpet posted:And yes, it sounds crazy and awesome. I've wanted it since it was first announced and finally bit the bullet. The first time I turned it on and screwed with some knobs I had essentially recreated Pinion by NIN. Which is exactly what it should be doing.
|
# ? Jul 18, 2012 21:28 |
|
Is it possible in Ableton to remap MIDI parameters like velocity? For example, suppose I make some wobble bass synth. Can I set it so that the signals from my MIDI controller are mapped note->note and velocity->LFO frequency, with the actual velocity just being 127 all the time?
|
# ? Jul 20, 2012 03:45 |
|
...
colonp fucked around with this message at 18:11 on Mar 8, 2014 |
# ? Jul 20, 2012 07:30 |
|
colonp posted:The instrument need to have that functionality (Vel->LFO rate), or you'll need to make/find something in M4L. Some midi controllers don't have velocity sensitive keys.
|
# ? Jul 20, 2012 07:32 |
|
...
colonp fucked around with this message at 18:11 on Mar 8, 2014 |
# ? Jul 20, 2012 07:41 |
|
colonp posted:Sure, but what's the point of mapping velocity to anything if the velocity never changes? Maybe I misunderstood the question.. I think he's asking if you can have velocity midi data change other parameters inside the DAW instead of note velocity. Like if you hit the key softer you'd have less LFO applied while still registering the note itself at 127 velocity. If so, I do think there's a way to do this, but I don't know it.
|
# ? Jul 20, 2012 12:23 |
|
Ok, ive got a question: Ive been watching some vids on how to make bass growl. Best i can figure it really comes down to using EQ8 as a vowel filter. The problem is i cant figure out how the gently caress to automate every single frequency to move but all move in unison. Like, it needs 4-5 freqs to move all together, but stay the same distance apart. Ideally, id like to put them on on a fader so i can move them back and forth, but what always ends up happening is they all goto the same freq and it ends up being basically a HP filter. Any ideas?
|
# ? Jul 20, 2012 17:56 |
|
Can you throw the whole chain in an instrument rack and apply both 4 and 5 to the same macro knob?
|
# ? Jul 20, 2012 20:56 |
|
oredun posted:Ok, ive got a question: You can set the ranges for each one separately with macro knobs.
|
# ? Jul 20, 2012 21:27 |
|
...
colonp fucked around with this message at 18:12 on Mar 8, 2014 |
# ? Jul 21, 2012 08:48 |
|
MixMasterMalaria posted:I think he's asking if you can have velocity midi data change other parameters inside the DAW instead of note velocity. Like if you hit the key softer you'd have less LFO applied while still registering the note itself at 127 velocity. This is it exactly. Sorry I was unclear before. It seems like you ought to be able to remap MIDI input, given how you can arbitrarily remap keyboard shortcuts and other such things, but just because I think it's reasonable, that doesn't mean they wrote the software that way. colonp, I googled Max for Live and it looks like you can basically write arbitrary software that interfaces with Live if you have it, so I assume that this is indeed possible there. It would be great if it were possible somehow in vanilla Ableton, though.
|
# ? Jul 23, 2012 05:43 |
|
ejstheman posted:It would be great if it were possible somehow in vanilla Ableton, though. In Operator, for example, you can set the "Vel" parameter of each oscillator to 0%, thereby stopping note velocity from affecting volume, and you can assign velocity to modulate some other parameter (such as LFO rate or amount) in the modulation section under the Global shell. Obviously of course if you wanted to map this data to something that isn't already receiving those MIDI messages (like send levels or something), you'd have to do some clever routing or perhaps use M4L. One way you can sort of do this is by using an external MIDI routing tool such as Bome's or something like Pure Data. You can have it transform and return MIDI messages on a virtual MIDI port that's quick-mapped to a parameter using Live's mapping interface. Obviously this is kind of rube-goldberg though. Did I understand your question right?
|
# ? Jul 28, 2012 08:00 |
|
Just started using Ableton with my Novation Ultranova. I was messing around yesterday and layered some tracks with my synth. I saved the project then came back to it today. When I play the project now, it sounds all loud/garbled - something is obviously wrong. However I exported the track to a .wav to test and it sounded fine. So it's only sounding weird within Ableton. Any ideas? e- Trying to record on a track right now and it is echoing whatever i'm playing and at a 1/2 step down, no matter which key I press? So weird... I think it has to do with my Output Config. Right now all 4 are selected (1mono&2mono, 3mono&4mono, 1/2stereo, 3/4stereo) http://i.imgur.com/k58Es.jpg - pic of my session I probably messed something up with the workflow. I was simply copy/pasting the tracks, then just deleting what was in them and recording into them. khysanth fucked around with this message at 04:20 on Jul 31, 2012 |
# ? Jul 31, 2012 03:33 |
|
If it sounds like crap while playing back in Ableton, but sounds fine when you export it, it's likely an issue with your audio interface (or lack thereof). Go into the audio settings and check what the "Driver Type" "Audio Device" and "Buffer Size" are set to. For "Drive Type", you want it to be set to ASIO if that is an option. If that's not an option, try changing the "Audio Device" (if there's more than one option) and seeing if ASIO is a driver option for any of them. If that doesn't work, try increasing the buffer size (if you can't do this in this settings window, click "Hardware Setup"). A higher buffer can fix playback issues, but will also increase latency (time from when you play a note and when you actually hear it). Increase the buffer in steps until your issues go away. Also verify the "In/Out Sample Rate" is set to 44100 or 48000. If you're using onboard sound or a consumer soundcard marketed for multimedia and games, you may not be able to get clear playback without an unacceptably high buffer. If that's the case, an audio interface (soundcard designed for music production) is the solution.
|
# ? Jul 31, 2012 17:47 |
|
|
# ? Jun 10, 2024 11:22 |
|
I'm fairly sure that isn't the exact problem. The Ultranova IS an audio device/sound card and i'm using ASIO and all of the manufacturer/Ableton recommended settings on that front.
|
# ? Jul 31, 2012 19:47 |