|
SB35 posted:Any suggestions as far as an (electrical or general) Engineer's desk reference book? Well for EE, it really depends on what you do. If you're a RF guy, a say signal processing textbook/handbook may not be the most useful for you. That said, I don't really keep too many general reference books on hand at work, all of mine are very specific (high-speed signal integrity, PCI/PCIe specific, FPGA specific, etc). I've actually found the FE prep book from Lindeburg and the NCEES reference manual they give you the FE to be very handy in general though.
|
# ? Aug 22, 2012 05:51 |
|
|
# ? Jun 5, 2024 04:57 |
|
Honestly? I have all my college textbooks and company supplied manuals and texts on a shelf next to my desk and 99.9% of what I want to know is easier to find on the internet.
|
# ? Aug 22, 2012 17:58 |
|
.
Thoguh fucked around with this message at 16:07 on Aug 10, 2023 |
# ? Aug 23, 2012 00:12 |
|
Thoguh posted:I've found that an engineer's bookshelf is much more of a personal statement than an actual daily resource. "I didn't have to sell my books back for booze money after my paid internship."
|
# ? Aug 23, 2012 01:03 |
|
What is wrong with western Australia that is making them offer these obscene salaries?
|
# ? Aug 23, 2012 04:51 |
|
Wolfy posted:What is wrong with western Australia that is making them offer these obscene salaries? Blind guess, I'd assume the money is intended to offset suicidal thoughts from having absolutely nothing to do. At least that's why salaries for people working in the Alaskan wilderness and stuff are so high, I think.
|
# ? Aug 23, 2012 15:00 |
|
Wolfy posted:What is wrong with western Australia that is making them offer these obscene salaries? As movax touched on, you're in the middle of absolutely nowhere, in obscenly hot places, working a fairly nasty shift before piling back out to civilisation. When your life consists of 12-14 hours of work, then sitting in a mess hall eating a meal before sitting in a dorm (which they often give to someone else when you're off roster, so you can't necessarily decorate it to your liking) touching yourself to sleep, you don't really have much to do. It's really not much different to working on an offshore oil rig, or in the boonies in Alaska/northern Canada, or probably somewhere horrid in the North Sea. They pay you wheelbarrows of solid gold in exchange for you not having a life.
|
# ? Aug 23, 2012 15:21 |
|
Just accepted an offer for my second "grown-up" job, after starting my first about a year and a half ago. This one is almost a perfect match for my skills, interests, and career goals, while the other one had me doing web development work (as an ECE specializing in digital design and firmware). I'm glad to be moving on (I get a real, honest to God office!), but I don't think it's going to be possible to leave the old job in good graces: they're already understaffed and in the middle of a hiring freeze. Any advice, aside from the obvious "be gracious, don't be a dick"? Any tips on things to look out for when transitioning "big boy" jobs? I'm sure there's a lot that can be lost in the shuffle.
|
# ? Aug 25, 2012 18:33 |
|
Anybody experienced with getting an engineering masters through distance learning? I'm active duty military living in Tucson. I have a BS EE. It's not really possible to attend classes in person as I'll be deploying frequently. I really need to start working a masters of some kind. I'd prefer to stay in the EE field if possible. Any advice?
|
# ? Aug 25, 2012 19:10 |
|
Zuph posted:Just accepted an offer for my second "grown-up" job, after starting my first about a year and a half ago. This one is almost a perfect match for my skills, interests, and career goals, while the other one had me doing web development work (as an ECE specializing in digital design and firmware). I'm glad to be moving on (I get a real, honest to God office!), but I don't think it's going to be possible to leave the old job in good graces: they're already understaffed and in the middle of a hiring freeze. Any advice, aside from the obvious "be gracious, don't be a dick"? Any tips on things to look out for when transitioning "big boy" jobs? I'm sure there's a lot that can be lost in the shuffle.
|
# ? Aug 25, 2012 19:21 |
|
Noctone posted:Just as a matter of courtesy, if/when your current employer makes a counter-offer to try to get you to stay, don't tell your current coworkers about it. We recently lost 7 people to another company and in the process I found out that an engineer who had started a month after me was (a) getting paid almost $2/hr more than I am and (b) was offered even more to stay. Really wish I didn't know that. Why? Why aren't you asking for more money based on that disclosure? I don't really understand how it is bad that you now know you could be making more money.
|
# ? Aug 25, 2012 19:48 |
|
Seems like it would be more courteous to tell your workmates that they're letting their lovely employer rip them off, but maybe that's just me.
|
# ? Aug 25, 2012 19:54 |
|
mistake post.
|
# ? Aug 25, 2012 19:56 |
|
Corla Plankun posted:Why? Safe and Secure! posted:Seems like it would be more courteous to tell your workmates that they're letting their lovely employer rip them off, but maybe that's just me. If you two are aware of any realistic way to leverage that information for a raise (and to do so without poisoning your former coworker's ability to get a reference), I'm all ears. Show me a boss that will give a raise solely based on "well [x person who did the same work as me and started around the same time I did] was getting paid that much" and I'll show you my surprised face. More than ever, the only useful leverage employees have for a raise these days is "or else I'll take my talents elsewhere." That's a bluff many people can't make in the current job market.
|
# ? Aug 25, 2012 21:04 |
|
manic mike posted:Anybody experienced with getting an engineering masters through distance learning? I'm active duty military living in Tucson. I have a BS EE. It's not really possible to attend classes in person as I'll be deploying frequently. I really need to start working a masters of some kind. I'd prefer to stay in the EE field if possible. Any advice? I am not sure how many worthwhile degree programs would fit in with an AF deployment lifestyle (I forgot which airframe you ended up with). I assume most officers end up with management masters from the usual diploma mills.
|
# ? Aug 25, 2012 22:25 |
|
manic mike posted:Anybody experienced with getting an engineering masters through distance learning? I'm active duty military living in Tucson. I have a BS EE. It's not really possible to attend classes in person as I'll be deploying frequently. I really need to start working a masters of some kind. I'd prefer to stay in the EE field if possible. Any advice? ODU's catalog: http://eng.odu.edu/enma/academics/EMSELongSched22Nov2011.pdf Edit: wow, oddly enough, they offer distance learning in Arizona through Yavapai College. I seriously wouldn't have expected that! Nowhere near Tuscon, though, so still doesn't help you. ODU works closely with the Navy, so they're accustomed to dealing with active duty military. grover fucked around with this message at 00:54 on Aug 26, 2012 |
# ? Aug 26, 2012 00:49 |
|
Noctone posted:More than ever, the only useful leverage employees have for a raise these days is "or else I'll take my talents elsewhere." That's a bluff many people can't make in the current job market. In any job market this is a good way to shoot yourself in the foot. You'll probably kill any potential promotions as well as get to the front of the line if any layoffs come about. The best way to negotiate is with another company's offer letter in hand.
|
# ? Aug 26, 2012 03:31 |
|
movax posted:I am not sure how many worthwhile degree programs would fit in with an AF deployment lifestyle (I forgot which airframe you ended up with). I assume most officers end up with management masters from the usual diploma mills. You're right, most do. The koolaid is so tasty how can we resist. But I knew at least one pilot who managed a MSEE. It is possible. grover posted:Tons of online MBA programs out there if that's your cup of tea. I'm in the process of starting a masters in engineering management through Old Dominion University, which is offered as distance learning, but not all their courses are on Adobe Connect or other true "you can take it anywhere" sense. A lot of what they pitch as distance learning appears to mean "branch campuse via VTC". I don't know much about the MBA but I did consider something like that. Truth is I'm a little overwhelmed at the number of degree types available to me. Many of them are related to engineering it seems. How would I pick one? I'd really like to do an MSEE though.
|
# ? Aug 26, 2012 06:47 |
|
manic mike posted:I don't know much about the MBA but I did consider something like that. Truth is I'm a little overwhelmed at the number of degree types available to me. Many of them are related to engineering it seems. How would I pick one? grover fucked around with this message at 14:00 on Aug 26, 2012 |
# ? Aug 26, 2012 13:58 |
|
Wolfy posted:What is wrong with western Australia that is making them offer these obscene salaries? I wouldn't say the work is as horrible as the aforementioned have made it out to be. Different mine sites have different amenities; ie gyms, sports fields etc. You *might* not have someone in your room when your off-shift. Because of the mining industry, the cost of living in Perth is stupidly high. Despite not having near the facilities as Sydney, it's median house price is on par with it. The low population isn't enough to service the mining industry, and no-one will move here because of the living cost. Nepotism is rife, so it's pretty hard to get in the industry without knowing someone. The qualifications they want are generally super specific, and most companies aren't keen on hiring someone to train them up because the turnover rate is extremely high because of the conditions: they want someone that is tried and tested. Renting in Perth is stupid as hell. Demand is outstripping supply and most folk are actually having to offer more than the asking rent in order to secure a place. So basically a combination of a) A small amount of people are actually willing to do the work b) Of that small group, the companies will only hire a few of those people c) The cost of living in Perth constraining that group even further
|
# ? Aug 26, 2012 15:22 |
|
I'd like to get my feet wet with robotics. Since I'll be pretty busy this semester with work and school(mech eng) I thought Lego Mindstorms would be a fun start. Two things, is this a worthy endeavor and is it possible to somehow put this experience on my resume? I plan on doing lots of exploration and not just basic stuff with it before I consider the knowledge resume worthy.
|
# ? Aug 27, 2012 05:47 |
|
huhu posted:I'd like to get my feet wet with robotics. Since I'll be pretty busy this semester with work and school(mech eng) I thought Lego Mindstorms would be a fun start. Two things, is this a worthy endeavor and is it possible to somehow put this experience on my resume? I plan on doing lots of exploration and not just basic stuff with it before I consider the knowledge resume worthy. You might be better off picking up an arduino and some basic servo or stepper motors and going that route. Lego Mindstorms is great, but probably limiting if you want to do projects for a resume. Plus you learn how to program in something more like a real programming language. If you're not comfortable jumping in that deep, maybe look at the Vex Robotics kit. It's like an older version of Lego Mindstorms. Also, look to see if there's a Mechatronics or intro to embedded class offered at your school. It might be an EE class instead of ME, but that'll get you started as well. Frinkahedron fucked around with this message at 06:02 on Aug 27, 2012 |
# ? Aug 27, 2012 06:00 |
|
Frinkahedron posted:You might be better off picking up an arduino and some basic servo or stepper motors and going that route. Lego Mindstorms is great, but probably limiting if you want to do projects for a resume. Plus you learn how to program in something more like a real programming language.
|
# ? Aug 27, 2012 06:19 |
|
huhu posted:Is there anything that works along with Python? Hopefully that's not a dumb question but that's currently the language I'm teaching myself. Sadly as far as classes go I'm out of room for classes before I graduate. If you're set on Python, it'd be a little harder but doable; google indicates that people have gotten python working on arduinos, but you can also just control an arduino over serial from a PC using a control program in python (this is what I mostly do with Arduinos anyway although my control programs are in C++). You'd need to pick up a tiny bit of C to run on the Arduino but there's a lot of documentation; something as basic as "read serial, if input A do B, if input C do D, else do nothing" wouldn't take you long to work out. You can get an arduino, a couple of servos, a breadboard, some header pins and some connector leads off ebay for under $50 total. If you have the money, you can shell out for a gumstix/beagle board/raspberry pi, all of which can run linux and could run python fairly easily, but aren't as easy to set up and the higher level of complexity could make things more difficult. Be warned that this can very easily turn into an expensive hobby. Also, I've posted this before, but the most important thing in robotics is the software rather than the hardware. Depending on your level of programming experience, it might be worthwhile to do an online CS or AI course (Sebastian Thrun runs a really good one at udacity and there are some other good ones there) before you start on the hardware.
|
# ? Aug 27, 2012 08:31 |
|
grover posted:The big question is: where do you want to go with your career? Hate to say it, but I haven't seen many jobs out there where a technical masters would be of any benefit at all; outside of academia, the higher level positions all seem to tend towards the business/management side, and all an MS would do is help you compete a little better against BS applicants for journeyman-level positions. Burns me, too, as I don't enjoy the business side nearly as much as I enjoy the technical side (it's why I became an engineer in the first place!), but there's nowhere to go with my career at this point but deeper into management. This sounds like wise advice. I'm committed to the AF until 2022 so it's difficult to answer a question about my career. In fact for the past several months I've been considering all kinds of different paths. But the pressure is on to get a masters. Or at least that's what Big Blue keeps telling me.
|
# ? Aug 27, 2012 08:34 |
|
Finally moving back to engineering. I did tech writing for nearly 5 years, and I thought I was ruint for getting back into to mechanical engineering. Turns out I was, as I'm going to be a process controls engineer. HMI Graphics was my "in" that let me apply 4 of my 5 years of writing. I did all sorts of writing (which make no bones people appreciate, but in general that is a plus-up skill for an engineer, rather than a "We need that guy" kind of skill), but my main focus was P&IDs, PFDs, GAs, etc for training animations. I drew the little vessels and valves and such, then programmed them in flash to interact. Well, it turns out that's what controls engineers do, in addition to setting up the PID loops and laying out control panels. I had no idea. I mean they (we?) have a controls PE exam, so it's an actual career path. I just need that offer letter to come today so I can pee in a cup.
|
# ? Aug 27, 2012 14:40 |
|
T-1000 posted:If you're doing mech eng, teaching yourself Matlab/Octave or C would probably be more useful (in that I haven't seen Python used in mechanical engineering but Matlab and C turned up a lot). The undergrad robotics course I tutored used both of those, as did many other courses. Most of the hardware you would want to use is very easy to program in C. Python is decent if he doesn't know any programming at all right now; the basic constructs/concepts can be taken from language to language. That said, quote:If you have the money, you can shell out for a gumstix/beagle board/raspberry pi, all of which can run linux and could run python fairly easily, but aren't as easy to set up and the higher level of complexity could make things more difficult. A cheap board like these (well, the RaspPi anyway) can save you from having to deal with embedded C and a possibly expensive programmer/debugger for the micro in use.
|
# ? Aug 27, 2012 15:12 |
|
I've already taken two courses in Matlab. I was talking with some people at my internship and they said Python is a useful language to learn. From what I've read it's pretty easy to work with. I've already been involved with some HTML and Visual Basic so I'm not a beginner to coding. How easy does C rank in all of these? School starts in a week so I don't really have time for a language with a large learning curve. As far as Python goes I've already written programs to "Discover the largest product of five consecutive digits in the given 1000-digit number." and "Find the only Pythagorean triplet, {a, b, c}, for which a + b + c = 1000." just to give you an example of where I'm at in the language.
|
# ? Aug 27, 2012 20:51 |
|
huhu posted:I've already taken two courses in Matlab. I was talking with some people at my internship and they said Python is a useful language to learn. From what I've read it's pretty easy to work with. I've already been involved with some HTML and Visual Basic so I'm not a beginner to coding. How easy does C rank in all of these? School starts in a week so I don't really have time for a language with a large learning curve. As far as Python goes I've already written programs to "Discover the largest product of five consecutive digits in the given 1000-digit number." and "Find the only Pythagorean triplet, {a, b, c}, for which a + b + c = 1000." just to give you an example of where I'm at in the language. I assume that since we are in Engineering thread computer language for you is a way to get job done rather than actual job. From this perspective Python is a best choice, imo. 'C' has much more complicated syntax and was never expected to become a computational language. Fortran used(?) to be a de-facto standard in scientific and engineering world due to the computational abilities. Despite a large amount of legacy code written in Fortran I see more and more engineers switching to Python. Also if you like Matlab and Python you absolutely need to take a look at NumPy and SciPy - it is a great replacement of Matlab. And there is a nice Python thread on SA.
|
# ? Aug 27, 2012 23:19 |
|
huhu posted:I'd like to get my feet wet with robotics. Since I'll be pretty busy this semester with work and school(mech eng) I thought Lego Mindstorms would be a fun start. Two things, is this a worthy endeavor and is it possible to somehow put this experience on my resume? I plan on doing lots of exploration and not just basic stuff with it before I consider the knowledge resume worthy. Do a competition. Something like this: http://ewh.ieee.org/reg/3/southeastcon2013/documents/IEEE%20Southeastcon%202013%20-%20Hardwave%20Rules%20-%20Version%201.pdf Though not that specifically because this year's task is going to be really hard for a complete beginner. But I would imagine there is similar stuff going on around the country. Get a few people from your school together and put together an entry. It gives you something concrete for your resume and, more importantly, having a deadline and a goal is great motivation. huhu posted:Is there anything that works along with Python? Hopefully that's not a dumb question but that's currently the language I'm teaching myself. Sadly as far as classes go I'm out of room for classes before I graduate. For robotics you are looking at embedded systems programming. Mostly that means you are going to be programming in some form of embedded C or assembly. Which means you are going to be programming in C because you really, really don't want to use assembly. If you are just getting started I think an Arduino is the only choice. If you get stuck you can type almost literally anything and "Arduino" into Google and find somebody telling you exactly how to do it.
|
# ? Aug 28, 2012 01:55 |
|
T-1000 posted:You can get an arduino, a couple of servos, a breadboard, some header pins and some connector leads off ebay for under $50 total. huhu fucked around with this message at 02:22 on Aug 28, 2012 |
# ? Aug 28, 2012 02:19 |
|
huhu posted:I've already taken two courses in Matlab. I was talking with some people at my internship and they said Python is a useful language to learn. From what I've read it's pretty easy to work with. I've already been involved with some HTML and Visual Basic so I'm not a beginner to coding. How easy does C rank in all of these? School starts in a week so I don't really have time for a language with a large learning curve. As far as Python goes I've already written programs to "Discover the largest product of five consecutive digits in the given 1000-digit number." and "Find the only Pythagorean triplet, {a, b, c}, for which a + b + c = 1000." just to give you an example of where I'm at in the language. movax posted:A cheap board like these (well, the RaspPi anyway) can save you from having to deal with embedded C and a possibly expensive programmer/debugger for the micro in use. Exergy posted:I assume that since we are in Engineering thread computer language for you is a way to get job done rather than actual job. From this perspective Python is a best choice, imo. 'C' has much more complicated syntax and was never expected to become a computational language. Fortran used(?) to be a de-facto standard in scientific and engineering world due to the computational abilities. Despite a large amount of legacy code written in Fortran I see more and more engineers switching to Python. My python-advocating friends also rate NumPy highly. OctaviusBeaver posted:For robotics you are looking at embedded systems programming. Mostly that means you are going to be programming in some form of embedded C or assembly. Which means you are going to be programming in C because you really, really don't want to use assembly. edit: huhu posted:I looked into Aruino and I like the coding of it over Lego Mindstorms which looks a little too basic for what I want. I also like the cost a lot more. I can justify spending $100 or less on a nice used/non used setup, could you guys help me pick a good setup? If possible I'd like to include a simple motor of sorts to do dynamic mechanical stuff. I tried looking on Ebay myself I'm just not sure what I need or don't need. Alternatively, all you need is an arduino board, a solderless breadboard, a bunch of cables for wiring the board (don't know what they're called), a couple of servo motors, and a few LEDs and resistors to get started. If you want a mobile robot, you can pick up a dual gearbox kit (Tamiya make a good one), an H-bridge chip or equivalent (for powering the motors, they draw too much current to run direct off the microcontroller), some batteries, and maybe some sort of wireless shield for the arduino to let you send commands wirelessly if you want to remote control it. Sonar and IR sensors are pretty easy to acquire but a little more fiddly to make work. LCD screens can be useful for status info. Keypads can be useful for control. Plenty of documentation out there for all this. It's probably best to start small though. T-1000 fucked around with this message at 02:52 on Aug 28, 2012 |
# ? Aug 28, 2012 02:31 |
|
You could get one of these 3pi robots http://www.pololu.com/catalog/product/975 and try that out. They have expansion kits so that might be suitable for you. They're programmable in C.
|
# ? Aug 28, 2012 02:31 |
|
Flash18 posted:You could get one of these 3pi robots http://www.pololu.com/catalog/product/975 and try that out. They have expansion kits so that might be suitable for you. They're programmable in C. Thanks but I like the idea of separate components over everything together. How is this: http://www.pololu.com/catalog/product/2190 Edit: Sorry for derailing the thread, hopefully after this post or two it'll be back on track. huhu fucked around with this message at 02:50 on Aug 28, 2012 |
# ? Aug 28, 2012 02:48 |
|
I'm a college student (UK, so I'm 17 and will be applying for universities in a few months) interested in engineering, and I was originally going to go for a mechanical engineering degree but my main interest is in robotics and that sort of thing. Anyway, looking through a course guide, I spotted mechatronic engineering as a course at a few places, and thought it seemed right for me. A combination of electronic and mechanical engineering to deal with the various situations when the two collide, from what I gather, incorporating systems design and some computing. Leeds University offers a Mechatronics and Robotics (MEng) course, and that's my top choice at the minute, but I just wanted to make sure that mechatronics wasn't less valued in some way than a straight mechanical/electronic engineering degree. I dread coming out with my fancy newfangled degree and being told it's worthless, basically. It doesn't seem that way, but only a few places offer it and it's quite new, so just wanted to make sure it is in fact a respected field, and was wondering if anyone could tell me more about it with regards to job opportunities after uni, and how they compare to ME/EE degree prospects. Thanks a lot.
|
# ? Aug 28, 2012 14:18 |
|
Jakabite posted:I'm a college student (UK, so I'm 17 and will be applying for universities in a few months) interested in engineering, and I was originally going to go for a mechanical engineering degree but my main interest is in robotics and that sort of thing. Anyway, looking through a course guide, I spotted mechatronic engineering as a course at a few places, and thought it seemed right for me. A combination of electronic and mechanical engineering to deal with the various situations when the two collide, from what I gather, incorporating systems design and some computing. I am not familiar with the situation in the UK, but my gut tells me that a mechatronics degree might be considered the same as a biomedical engineering degree here in the States. It may be more applicable to getting a biomedical engineering degree at the masters or PhD level, but some people here view it as a "jack of all trades, master of none" type degree, versus someone who does straight ME or EE, and specializes in biomedical-related areas. ME is incredibly broad, as is EE. What are you most interested in about robotics? The controls? Software? Electronics? Mechanical design?
|
# ? Aug 28, 2012 14:45 |
|
T-1000 posted:Not trying to start a programming-derail, but for what it's worth, I've never even been exposed to Fortran - everything I or any of my friends have done was C, C++, Matlab or Python. I don't think it was even taught at university (admittedly not that long ago). I always got the idea that Fortran was largely obsolete unless you needed really, really fast execution or had a legacy system running it. Also, what do you mean by C not being intended as a "computational language"? This note is based on my experience in chemical and petroleum industry. In early 2000's when doing PhD I worked with several relatively large ChE software packages, both with numeric part written in Fortran and GUI in C/C++. I even did some development for one of it as a side project. Then I joined my current company and again - majority of software uses the same combination. And those are not small university or student projects - large-scale simulators widely used in petroleum industry and available commercially. From this I can tell that majority of large and established packages are originating from 80's and 90's with numeric written in Fortran and none of these companies will ever commit their resources to converting it to Python or what have you. Now with the raise of Python new software may be developed in it, although Fortran still is very appealing due to huge repository of well-established math and specialized libraries. So comparing the amount of legacy code with new developments in industry I believe that Fortran may easily stay for another 5-10 years. The fact that it was not taught at university is a poor argument against language, more against the relevance of education. I also had to learn Fortran myself. As for C - it was created as a general-purpose language mainly for system programming, while Fortran was created just for numerical computations. Really let's avoid derailing, especially since there are plenty of discussions on C vs. Fortran and we may spend a lot of time trying to reach an agreement. Overall, what I am trying to say - whether you like it or not real world chemical, petroleum, CFD and many other applications run on Fortran. And sustaining or development of new features requires Fortran.
|
# ? Aug 28, 2012 16:20 |
|
movax posted:I am not familiar with the situation in the UK, but my gut tells me that a mechatronics degree might be considered the same as a biomedical engineering degree here in the States. It may be more applicable to getting a biomedical engineering degree at the masters or PhD level, but some people here view it as a "jack of all trades, master of none" type degree, versus someone who does straight ME or EE, and specializes in biomedical-related areas. ME is incredibly broad, as is EE. I'm not really sure, that's the thing. Just the overall design, and then getting an idea of how all the parts work together. The algorithm writing aspect is good fun too, the programming, but I don't really want to do straight computer science. Like I said, I did lean more towards mechanical but now I'm probably swaying more towards EE. Thanks for the input by the way! I saw a few other mechatronic engineers further up the thread, I don't suppose any of you guys could weigh in if you're reading this?
|
# ? Aug 28, 2012 21:22 |
|
Jakabite posted:I'm not really sure, that's the thing. Just the overall design, and then getting an idea of how all the parts work together. The algorithm writing aspect is good fun too, the programming, but I don't really want to do straight computer science. Like I said, I did lean more towards mechanical but now I'm probably swaying more towards EE. Thanks for the input by the way! For what it's worth, many of my mates did Mechatronics at UQ here in Australia and none struggled to get a job. They were all good students with decent marks and the job market here at the time was seeing an average of over 90% instant employment in engineering, so take what you will from that. For what it's worth, my company at the time did not accept Mechatronics degrees - only pure mech or elec. We do a lot of combining those fields though so it was almost certainly to their detriment. I expect them to change it if they haven't already. It's a pretty interesting major. I was personally very close to choosing it myself. It really shines at the interface of both fields, eg: power transmissions in electrical motors and traction equipment, or in control systems eg: for robotics.
|
# ? Aug 28, 2012 23:40 |
|
|
# ? Jun 5, 2024 04:57 |
|
Jakabite posted:I'm not really sure, that's the thing. Just the overall design, and then getting an idea of how all the parts work together. The algorithm writing aspect is good fun too, the programming, but I don't really want to do straight computer science. Like I said, I did lean more towards mechanical but now I'm probably swaying more towards EE. Thanks for the input by the way! The lab I do my graduate work is basically a Mechatronics lab, but we are all mechanical or electrical engineers that are specializing. You are probably better off doing an ME or EE and either getting a minor in Mechatronics (or at least plan your electives to have a lot of those classes you can put on a resume). That way you can still say I'm an Electrical/Mechanical engineer for a whole slew of other jobs as well as having that mechatronics experience.
|
# ? Aug 28, 2012 23:45 |