|
That locomotive weighed in at 145 tons. Assuming only half of that weight impacted from a height of about 12 feet that's something like 60,000 tons of impact force (based on some very quick and dirty googled up force calculator math). Obviously that's spread over a large area but I don't think much of it is going to be salvageable, and that's before the other end hit too.
Disgruntled Bovine fucked around with this message at 05:14 on Nov 7, 2012 |
# ? Nov 7, 2012 05:12 |
|
|
# ? May 25, 2024 14:57 |
|
I thought we had pictures earlier in this thread of a locomotive that suffered a similar impact?
|
# ? Nov 7, 2012 06:47 |
|
CharlesM posted:I thought we had pictures earlier in this thread of a locomotive that suffered a similar impact? This one? an AOL chatroom fucked around with this message at 16:54 on Nov 7, 2012 |
# ? Nov 7, 2012 16:51 |
|
Erwin posted:https://www.youtube.com/watch?v=OvyIrsZ7Zhs Argh! They broke her back. Don't worry, they'll just bend up some frame rail braces and buy about 500 pounds of welding rod.
|
# ? Nov 7, 2012 19:18 |
|
The button cap for the bell is removable. People stick the oddest things in them. From funny to NWS.
|
# ? Nov 8, 2012 06:21 |
|
Yeah, I think that was it.
|
# ? Nov 8, 2012 08:27 |
|
B4Ctom1 posted:The button cap for the bell is removable. People stick the oddest things in them. From funny to NWS. Wow... you get creative ones... All I get is crap! Or just sticking my finger in the hole.
|
# ? Nov 8, 2012 08:32 |
|
Kind of sort of trains. One day I should go and have a look at this http://www.visitnsw.com/destinations/country-nsw/deniliquin-area/finley/attractions/finley-railway-museum It's one of those things that you live near but never really think about going to. A couple of streets up from that is a museum of sorts with a lot of old equipment too including the town's old lighting plant. I'd like to go see that too.
|
# ? Nov 8, 2012 20:48 |
|
B4Ctom1 posted:The button cap for the bell is removable. People stick the oddest things in them. From funny to NWS.
|
# ? Nov 8, 2012 20:53 |
|
Disgruntled Bovine posted:I had no idea anyone was still making diesel mechanical locomotives. That seems more than a little insane to me. I wonder why they did it? Barely on topic but the gas engine in the prius is as efficient as a diesel, though less powerful per litre. It leaves the intake valves open during the start of the compression stroke, partially pressurising the intake to remove pumping losses on the next intake stroke, also allowing a longer effective expansion stroke than compression.
|
# ? Nov 9, 2012 21:29 |
|
Bow TIE Fighter posted:You basically described a Prius, the electric motor does most of the propulsion, while the gas engine is a generator and can assist when accelerating. There's s few types of hybrids, most locomotives are "series" where only the electric motor propels the vehicle and the gas engine is just a generator, while the Prius is "parallel" where both motors are used as needed. I'm sure by now someone has made a diesel hybrid car, I know European car makers have very efficient diesel motors in their small cars, so the technology is out there. Not really. The engine in the prius is connected in parallel to the wheels with the electric motor, through a planetary gearset. http://eahart.com/prius/psd/ If you every hear so called "technical" people ripping on the prius, they are dumbasses. There is more clever tech in 1 prius than all musclecars from the 1960s. Giblet Plus! fucked around with this message at 02:09 on Nov 10, 2012 |
# ? Nov 10, 2012 02:07 |
|
Who likes a good exhaust fire/turbo oil seal failure? You do? You're in luck: https://www.youtube.com/watch?v=BStjNHvys2M vv I'd assume that a locomotive would be running a common rail with computer smarts instead of a mechanical lobe pump for injection, so shouldn't the air mass sensor pick the reduced volume of charge air and compensate? IPCRESS fucked around with this message at 11:12 on Nov 10, 2012 |
# ? Nov 10, 2012 03:11 |
|
Falkenbok posted:Who likes a good exhaust fire/turbo oil seal failure? You do? You're in luck: I don't think anything failed there. That's just how the trains run in Russia if this thread is anything to go by.
|
# ? Nov 10, 2012 03:37 |
|
I'm pretty sure that's what happens when the blower/turbo fails to produce any kind of boost - the fuelling system is still injecting enough fuel for the amount of air it expects, but the air isn't there, so the exhaust ends up as a significant amount of superheated fuel vapor.
|
# ? Nov 10, 2012 09:18 |
|
Giblet Plus! posted:Not really. The engine in the prius is connected in parallel to the wheels with the electric motor, through a planetary gearset. That's really not saying much though. Most complex item on most 1960's cars or trucks was the three speed column shift linkage.
|
# ? Nov 10, 2012 11:14 |
|
Zeether posted:This needs to be a feature in the next Railworks. My friend and fellow engineer owns a lot of heavy equipment. Some of it is antique. He has a cool old 1800rpm 1956 Deutz F1L612 diesel engine. He is thinking about building a small track around his 10 acre property, and building a locomotive around this engine. The track would be simple heavy gauge angle iron for cost. The tie lumber would be chopped sections of the plentiful local pine trees shaved only on one side and buried. The spikes would be simple lag screws.
|
# ? Nov 10, 2012 20:16 |
|
I was talking about the pictures on the bell button. Although I bet with some texture wizardry it's possible.
|
# ? Nov 10, 2012 20:40 |
|
Zeether posted:I was talking about the pictures on the bell button. Although I bet with some texture wizardry it's possible. Oh, I figured it out. Railworks is a game? They need to add radios that barely work and that will not turn up or down. Cab noise so loud that you cannot hear anything. Angry self important non-dispatching dispatchers condescendingly micromanaging you over the radio. A serious rattle that comes right from the control panel in front of your face that you cannot do anything about. Frost so thick on the inside of the windows you can barely see out the window from the heaters and defrosters that do not work. The game should also come with a cloth to put over your nose with smells to simulate flatulence from the "mexican fiesta plate" from the diner. Hygienic failure of your conductor and the last 50 train crews that slathered their body grease all over the inside of the locomotive. Plus the ruminant animal scent that comes from a mouth breather who smokes, drinks coffee, and never does brush/floss who will not shut their loving mouth, even while eating. B4Ctom1 fucked around with this message at 22:40 on Nov 10, 2012 |
# ? Nov 10, 2012 22:38 |
|
B4Ctom1 posted:The game should also come with a cloth to put over your nose with smells to simulate flatulence from the "mexican fiesta plate" from the diner. Hygienic failure of your conductor and the last 50 train crews that slathered their body grease all over the inside of the locomotive. Plus the ruminant animal scent that comes from a mouth breather who smokes, drinks coffee, and never does brush/floss who will not shut their loving mouth, even while eating. I feel like this should be involved in any simulator that is simulating a "non-office" job.
|
# ? Nov 10, 2012 22:56 |
|
Wow can't believe I've missed this thread before today, any way cut back locomotive engineer working in the LA Service Unit out of West Colton here. Nice to see that SA has some rails.
|
# ? Nov 10, 2012 23:00 |
|
Livin' the dream on the Russian narrow gauge. https://www.youtube.com/watch?v=WdB5-eZL6-0 Preoptopus fucked around with this message at 01:47 on Nov 11, 2012 |
# ? Nov 11, 2012 01:44 |
|
B4Ctom1 posted:Oh, I figured it out. Railworks is a game? And that's why people pay money to drive in simulators but have to be paid to drive the real thing.
|
# ? Nov 11, 2012 01:55 |
|
Brother Jonathan posted:And that's why people pay money to drive in simulators but have to be paid to drive the real thing. Yeah. The other option would be to have the simulator only work at 3am on day one, then call your phone using skype/voip/googlephone at 9pm the same day to come play. Then call you to come play at 3am the following day, and repeat. If you fail to answer your phone a couple of times the game self deletes your registration key. Also, when it calls you to play at 3am, it could make you sit around in the simulated depot for 4 hours before letting you drive the train. Also these simulators should put your train into a siding and let you sit there for hours watching other trains go by when you are only 1 mile from reaching your destination (bed). B4Ctom1 fucked around with this message at 04:13 on Nov 11, 2012 |
# ? Nov 11, 2012 04:08 |
|
from the AI horrible mechanical failure thread a crane drops a new locomotive https://www.youtube.com/watch?v=OvyIrsZ7Zhs
|
# ? Nov 11, 2012 04:27 |
|
B4Ctom1 posted:from the AI horrible mechanical failure thread Or previous page from this thread too
|
# ? Nov 11, 2012 13:58 |
|
Jusupov posted:Or previous page from this thread too Gah! How did I miss that
|
# ? Nov 11, 2012 23:35 |
|
A picture from the Western Maryland Scenic Railroad:
|
# ? Nov 12, 2012 00:45 |
|
Brother Jonathan posted:A picture from the Western Maryland Scenic Railroad: That's beautiful. I haven't been up there since I was a little kid. I should go back sometime...
|
# ? Nov 14, 2012 16:57 |
|
B4Ctom1 posted:Gah! How did I miss that So do you tell the rookie drivers that when it snows they have to get out and chain?
|
# ? Nov 14, 2012 18:47 |
|
The tram that runs outside my house decided to go a bit fast around the corner up the end of my street this afternoon. Apparently the black car seen in the photo hit the tram as it was turning (right track, heading towards camera) which somehow got the pantograph caught in the wires. That tore off and the tram rolled to a stop ~30 meters down the track. Must have been taking the corner at some speed for it to go that far.
|
# ? Nov 15, 2012 16:18 |
|
Railworks needs to make the cabs more interactive, more then half of the buttons don't do a drat thing. The ES44 have a simple yellow button for the bell along with a near blank MFD.... The C44-9W has the square yellow bell button and a MFD that at least pretends to do something. Oh and some locomotives have some indecipherable radio chatter so there is that. KennyLoggins fucked around with this message at 00:02 on Nov 16, 2012 |
# ? Nov 16, 2012 00:00 |
|
This is just being reported: 4 Dead as Train Hits Vets' Parade. In Midland, Texas, a parade float carrying veterans, some disabled and in wheelchairs, was hit by a Union Pacific freight train at a grade crossing. One person is quoted as saying that "sirens from the police cars in the parade may have drowned out the sound of the approaching train." There is a disagreement over whether the crossing signal was working, but in footage from a local television station, one can see at 48 sec. into the video the crossing where the accident happened, and the lights are flashing with the arm down. "Witnesses said the gate did not go down before the floats got to the tracks, KMID reported." So they went down after? I am eagerly awaiting the investigation from the NTSB. This makes no sense.
|
# ? Nov 16, 2012 09:32 |
|
http://www.youtube.com/watch?v=IJNR2EpS0jw Victoria Metro's new rail safety campaign is...... pretty drat catchy.
|
# ? Nov 16, 2012 11:02 |
|
Brother Jonathan posted:This is just being reported: 4 Dead as Train Hits Vets' Parade. The town I used to live in was completely bisected by railroad tracks (the GTW). The 4th of July parade viewing booth was right near one of the railroad crossings, so of course one year a train went through halfway through the parade and stopped things up for a few minutes. I'm sure the the parade organizers were unhappy at that, but hey, at least nothing got hit!
|
# ? Nov 16, 2012 19:33 |
|
Brother Jonathan posted:This is just being reported: 4 Dead as Train Hits Vets' Parade. Update: I've been scanning the comments of local newspapers and television stations looking for eyewitness accounts, and I've found a few. Important points:
|
# ? Nov 17, 2012 01:57 |
|
Brother Jonathan posted:[*]The driver of the second float, the one that was struck, entered the crossing before there was sufficient clearance on the other side. The float was on an 18-wheeler with a flat trailer, and the driver was preoccupied with closely following the float in front. When the train was seen coming, there was nowhere to go. For fucks sake. Never go across the tracks unless there's room for your vehicle on the other side. Even if you think there might be enough room, wait until you're sure there's more than enough so you don't get stuck in the danger zone.
|
# ? Nov 17, 2012 03:26 |
|
Part of the reason no one heard the train coming might have been because that crossing was in one of these stupid "quiet zones". Because not hearing those annoying horns is more important than safety. That said, the engineer was probably blowing the horn anyway because the track through Midland Texas is straight and unobstructed. He could have easily seen the truck stuck on the tracks from far off.
|
# ? Nov 17, 2012 06:22 |
|
speaking of railroad crossings I noticed this today although there was a truck there and it was working on my way back for another train.
|
# ? Nov 17, 2012 06:35 |
|
Disgruntled Bovine posted:Part of the reason no one heard the train coming might have been because that crossing was in one of these stupid "quiet zones". Wait what? I always thought that you were pretty much required to sound the horn when you were approaching any grade crossing because, you know, don't get run over a train, goddamn but it's been a while since I looked.
|
# ? Nov 17, 2012 07:07 |
|
|
# ? May 25, 2024 14:57 |
|
StandardVC10 posted:Wait what? I always thought that you were pretty much required to sound the horn when you were approaching any grade crossing because, you know, don't get run over a train, goddamn but it's been a while since I looked.
|
# ? Nov 17, 2012 08:03 |