|
Factory Factory posted:Yes, that's what we mean. And if it's only going up to 38x, well, something is amiss because that's only the top turbo multiplier. You should be able to turn it much higher. It might require me to raise other settings before the cap will go up maybe? I don't know. O.N.E. has a whole shitload of settings. Here's a video I found of the O.N.E. section: https://www.youtube.com/watch?v=4tmX0_dxzeo The Man From Melmac fucked around with this message at 00:33 on Mar 30, 2013 |
# ? Mar 30, 2013 00:30 |
|
|
# ? May 13, 2024 20:00 |
|
Is there some kind of ratio unlock or CPU Host Clock Control setting in the BIOS? Did you maybe get a 3570 non-K version? BIOS overclocking is always preferable vs. overclocking in Windows for stability-purposes, which is the main reason I'd suggest avoiding Biostar's app if possible. Biostar is near-bottom-tier of motherboards and not really recommended. If it was ASUS/Asrock/MSI/Gigabyte you'd have more luck with finding support on the board, but as it stands you picked a minority board so you're going to be lacking in google/support information.
|
# ? Mar 30, 2013 00:36 |
|
Check 2:00 on that video. Alternatively, adjust the turbo limits so that 1, 2, 3, and 4 core are all the same and all 40. You will need to adjust the power limits, since it looks like the board doesn't do that for you. Factory Factory fucked around with this message at 00:41 on Mar 30, 2013 |
# ? Mar 30, 2013 00:38 |
|
grumperfish posted:Is there some kind of ratio unlock or CPU Host Clock Control setting in the BIOS? Did you maybe get a 3570 non-K version? No, this is definitely the 3570K, I just checked my invoice. Factory Factory posted:Check 2:00 on that video. Er, I specifically linked to 2:00. I'm not sure what you're wanting me to look at. Also, I don't really know what to adjust the power limits to.
|
# ? Mar 30, 2013 00:46 |
|
Oh, the forums ate the time link. But you can't even type in a number there?
|
# ? Mar 30, 2013 00:48 |
|
Factory Factory posted:Oh, the forums ate the time link. But you can't even type in a number there? Oh! I guess I could try that. But first I want to know about the power limit thing that was mentioned. grumperfish posted:Biostar is near-bottom-tier of motherboards and not really recommended. If it was ASUS/Asrock/MSI/Gigabyte you'd have more luck with finding support on the board, but as it stands you picked a minority board so you're going to be lacking in google/support information. Well, it was cheap and had good reviews on Newegg and the overclocking websites, so I went for it. That was back in 2011.
|
# ? Mar 30, 2013 00:49 |
|
Benjamin Black posted:Oh! I guess I could try that. But first I want to know about the power limit thing that was mentioned. Most boards have user-selectable per-core power limits that automatically throttle the CPU speed if they reach a specific power threshold. You can generally set these figures to an arbitrarily-high number to override any throttling when you're overclocking beyond the standard CPU speeds. My board has a per-chip amp/watt throttle setting so I bumped it up to 300A/300W to allow higher limits to overclocking, but I'm not sure what the equivalent setting is with Biostar boards.
|
# ? Mar 30, 2013 01:01 |
|
grumperfish posted:Most boards have user-selectable per-core power limits that automatically throttle the CPU speed if they reach a specific power threshold. You can generally set these figures to an arbitrarily-high number to override any throttling when you're overclocking beyond the standard CPU speeds. My board has a per-chip amp/watt throttle setting so I bumped it up to 300A/300W to allow higher limits to overclocking, but I'm not sure what the equivalent setting is with Biostar boards. I see. Okay, well, I went back into the BIOS and I typed 40, and it forced it down to 38. Which setting specifically are you wanting me to change? Power Limit 1 Value? Both Power Limit 1 & 2?
|
# ? Mar 30, 2013 01:05 |
|
Seems like no matter what I change, it's forcing CPU ratio back down to 40. I really have no clue what to do. I've read people overclocking to 4.7 GHz with this board, and the box the processor comes in says 3570K plain as day, and 'Unlocked'. Well poo poo, it looks like there are a lot of Z68 boards that have issues overclocking Ivy Bridges. http://www.legitreviews.com/article/1917/1/ What the gently caress do I do now. Also of note, I don't have adjustable controls for the individual cores like it shows in the video. The BIOS isn't equipped to handle Ivy Bridge processor overclocking. It looks like I'm screwed until I buy a new motherboard. The BIOS is already fully updated. gently caress gently caress gently caress gently caress gently caress. I wish someone had mentioned this when I mentioned I wanted to run an Ivy Bridge on a Z68 chipset. I don't have the money for a new motherboard, so it seems my journey ends here unless someone has a Z77 motherboard they want to give away. The Man From Melmac fucked around with this message at 01:28 on Mar 30, 2013 |
# ? Mar 30, 2013 01:08 |
|
Benjamin Black posted:Seems like no matter what I change, it's forcing CPU ratio back down to 40. I really have no clue what to do. I've read people overclocking to 4.7 GHz with this board, and the box the processor comes in says 3570K plain as day, and 'Unlocked'. future ghost fucked around with this message at 03:03 on Mar 30, 2013 |
# ? Mar 30, 2013 03:01 |
|
Also, the processor is working, you just can't overclock evidently. It's not the end of the world. If someone had known and told you, what would you have done differently? You already had the motherboard didn't you? Or did you buy it with the processor?
|
# ? Mar 30, 2013 03:16 |
|
grumperfish posted:Most P67/Z68 boards can run Ivy bridge chips fine if they're updated. You just picked a bad board. Check the parts megathread for a decent recommendation if you intend to replace it. It overclocks Sandy Bridge just fine. I did update the BIOS, but no dice. This really sucks. beejay posted:Also, the processor is working, you just can't overclock evidently. It's not the end of the world. If someone had known and told you, what would you have done differently? You already had the motherboard didn't you? Or did you buy it with the processor? I would've waited for the Haswell.
|
# ? Mar 30, 2013 03:31 |
|
I'm not sure why you didn't anyways. IB is not really an upgrade at all over SB if you were overclocking, due to the worse thermal performance of IB.
|
# ? Mar 30, 2013 05:38 |
|
KillHour posted:I'm not sure why you didn't anyways. IB is not really an upgrade at all over SB if you were overclocking, due to the worse thermal performance of IB. Well poo poo, so I could've gotten a 2500K, overclocked it, and been better off. I sure am good at wasting money!! I just wanted to stop getting throttled by CPU so much in Planetside 2. For what it's worth, it's performing much better now... The Man From Melmac fucked around with this message at 07:31 on Mar 30, 2013 |
# ? Mar 30, 2013 07:15 |
|
What did you have before?
|
# ? Mar 31, 2013 07:01 |
|
KillHour posted:What did you have before? An i5-2400 dual-core. Might've been a i5-2400K dual-core, not sure.
|
# ? Mar 31, 2013 09:39 |
|
No such thing as a 2400K unfortunately. On the bright side the 3570K was a bigger step up than the 2500K and should last you a while.
|
# ? Mar 31, 2013 09:53 |
|
Yeah, just save up for a new mobo and then you can overclock later. It's all good!
|
# ? Mar 31, 2013 16:11 |
|
An Unoriginal Name posted:No such thing as a 2400K unfortunately. Not compared to a 2500K overclocked, though, which would have saved him money for the performance, which is his point Edit: but as pointed out, you do have a good CPU now and it would be worth simply saving up for a decent Z77 board
|
# ? Mar 31, 2013 16:12 |
|
If I overclock my i5 2500K, will it make the built-in GPU faster too?
|
# ? Apr 1, 2013 01:20 |
|
Cardboard Box A posted:If I overclock my i5 2500K, will it make the built-in GPU faster too? Generally the frequency settings for the processor's clock speeds and the IGPU are separate, consult your motherboard manual to see if you can do it.
|
# ? Apr 1, 2013 02:05 |
|
grumperfish posted:I would've suggested not buying a Biostar board, but it's too late for that now. Biostar isn't all that bad, I have an overclocked 939 opteron 144 on a biostar N4SLI-A9 (1.8ghz to 2.7ghz, with stock amd opteron cooler), ran out of front side bus and didn't mod the bios for more) that is still running 7 years later! I beat the crap out of that motherboard with 2 other overclocked amds, a venice and a san diego. amp281 fucked around with this message at 03:35 on Apr 1, 2013 |
# ? Apr 1, 2013 03:30 |
|
Hey, remember that TOVERCLOCKER thing I mentioned? While the BIOS won't let me take the CPU ratio above 38, this utility will. Should I try it? If I raise CPU Ratio to 40, what should I raise CPU Clock to? CPU Ratio is at 36 currently, and CPU Clock at 100.4 MHz The Man From Melmac fucked around with this message at 04:00 on Apr 1, 2013 |
# ? Apr 1, 2013 03:56 |
|
Benjamin Black posted:Hey, remember that TOVERCLOCKER thing I mentioned? While the BIOS won't let me take the CPU ratio above 38, this utility will. Should I try it? Don't change it. Little gain and SB/IB don't take kindly with it being fussed with.
|
# ? Apr 1, 2013 05:28 |
|
Dogen posted:Don't change it. Little gain and SB/IB don't take kindly with it being fussed with. So just raise CPU Ratio to 40 and nothing else?
|
# ? Apr 1, 2013 05:49 |
|
Yeah at that level you shouldn't have to mess around with voltage or anything.
|
# ? Apr 1, 2013 05:56 |
|
Well so much for that. Instant bluescreen! Guess I shouldn't be surprised. On the bright side, I got to see Windows 8's new and improved BSOD.
|
# ? Apr 1, 2013 06:08 |
|
Benjamin Black posted:Well so much for that. Instant bluescreen!
|
# ? Apr 1, 2013 06:37 |
|
An Unoriginal Name posted:Generally the frequency settings for the processor's clock speeds and the IGPU are separate, consult your motherboard manual to see if you can do it. According to this review I can't overclock my IGPU. Oh well.
|
# ? Apr 1, 2013 12:28 |
|
That reviewer can't read manuals. MB Intelligent Tweaker -> Advanced Frequency Settings -> Internal Graphics Clock. Raise it until it starts crashing, then turn it to just below that.
|
# ? Apr 1, 2013 13:17 |
|
I managed to get a H80i cooler for free and decided to install it, as I already have a Z77 board (MSI GD55) and a i5-3570k processor. Might as well try some overclocking. After playing around with core voltages/core speeds and getting more BSOD-s than I have in my last 4 years combined, I arrived at 1.175 volts and 45 clock multiplier. Those settings managed to run Intel burn test at high stress level without crashing. The only other settings I changed are enabling Intel enhanced turbo for some reason and enabled XMP profiles. Should I just put them back to defaults? Should I actually do anything with turbo settings? Here's some more info from my successful attempt:
|
# ? Apr 1, 2013 19:23 |
|
You will want to run PRIME95 overnight or something. I never had any problems with system stability using IBT with my overclock, but Prime and real-world stuff would hang the system until I got everything just right.
|
# ? Apr 1, 2013 20:26 |
|
StinkingHomo posted:I managed to get a H80i cooler for free and decided to install it, as I already have a Z77 board (MSI GD55) and a i5-3570k processor. Might as well try some overclocking. After playing around with core voltages/core speeds and getting more BSOD-s than I have in my last 4 years combined, I arrived at 1.175 volts and 45 clock multiplier. Those settings managed to run Intel burn test at high stress level without crashing. The only other settings I changed are enabling Intel enhanced turbo for some reason and enabled XMP profiles. Should I just put them back to defaults? Should I actually do anything with turbo settings? You got a good chip. Try seeing how high you can get it at 1.3v or even 1.4v if your cooling is adequate. You wont know until you try. If your load temps in p95 are under 80*C you are probably okay for 24/7. Most say you don't want to go over 1.35-1.4v for 24/7 overclock but I think for the average person, temperatures would be too high beyond 1.4v anyway. Over 80 is not safe but I've benched at 90*C load before since I hate my processor. My 3570k can only do 4.1ghz at 1.175v. 4.5 requires 1.38v! My 3570k is a real pos, but all my previous processors have overclocked better than average so thats life. Delidding didn't even help it. Also reducing your CPU-PLL from 1.8v to 1.6v can help with temperatures if you start to have problems. The hotter your chip the more voltage you need the hotter your chip so reducing voltages like CPU-PLL can help. Intel technically overclocks with the turbo mode, but it would lock all your cores to the new turbo multi rather than running a staggered turbo at factory speeds (factory setting is single core highest freq, two core mode less high, three cores even less freq, all 4 cores barely any multiplier boost). I usually believe in changing as little options as possible, see if its stable without the enhanced turbo. I don't know what it does but I don't think you need it to overclock ivy. You should run the XMP profile to make your ram run at the correct frequency. amp281 fucked around with this message at 01:41 on Apr 2, 2013 |
# ? Apr 2, 2013 01:32 |
|
So I'm getting 46c temps at idle with a Cooler Master Hyper 212 Evo on a 3570k at stock settings. Arctic Silver 5 was used. I am thinking I may have fudged something, or does this chip really run that loving hot?
|
# ? Apr 2, 2013 02:06 |
|
Unless you room is really hot, and even that shouldn't affect it drastically, then you should be idling around in the 30-35 range. At least that's where I'm at.
|
# ? Apr 2, 2013 02:08 |
|
Apparently it is at 3800mhz with auto vcore, actually. Even so, that does seem really loving hot. I do only have the one fan, however. I've gotta put a new PSU in (I'm using a PoS Raidmax right now) tomorrow or the next day anywhere. I'll reseat it again and see how that goes.
|
# ? Apr 2, 2013 02:10 |
|
grumperfish posted:Means you'll need to increase vcore for the higher multiplier, although you usually don't need a voltage increase for such a small bump. That didn't do it either. It's just not gonna work. Oh well. Gotta save for a mobo.
|
# ? Apr 2, 2013 05:23 |
|
amp281 posted:You got a good chip. Try seeing how high you can get it at 1.3v or even 1.4v if your cooling is adequate. You wont know until you try. If your load temps in p95 are under 80*C you are probably okay for 24/7. Most say you don't want to go over 1.35-1.4v for 24/7 overclock but I think for the average person, temperatures would be too high beyond 1.4v anyway. Over 80 is not safe but I've benched at 90*C load before since I hate my processor. Thanks for the tips, I'll definitely try to go higher. Been running Prime95 for ~6 hours now with no errors, temps have settled near ~65. I have one more question though, task manager shows speed as 5.90-96 GHz, while maximum speed is at 4.5 GHz. What does 5.9 GHz that the task manager is showing mean?
|
# ? Apr 2, 2013 10:42 |
|
1.4V is the kind of voltage that will kill an i5-3570K in two years. Be careful playing with fire there.
|
# ? Apr 2, 2013 11:12 |
|
|
# ? May 13, 2024 20:00 |
|
Factory Factory posted:1.4V is the kind of voltage that will kill an i5-3570K in two years. Be careful playing with fire there. 1.4v is the upper end of what you can run 24/7 but I doubt it will kill it, especially with using offset for the voltage, power saving modes enabled, and the system idling at low voltage most of the time. The worse that usually happens is the chip starts to have issues maintaining that clock and requires more voltage so you have to lower the overclock. Most overclockers update in 2 years or less anyway. I would say the biggest thing is making sure temps are under 80*C p95. If your cooling system lets you run as high as 1.4v and its still under ~80*C go for it. Intel's vid table goes up to 1.52v. Not to say its realistic that a stock chip would run at that voltage but the general concensus from most of the overclocking forums is 1.4v is safe, albiet the upper end of safe. From my experience, my chip starts to get too hot around 1.35v even with delid and h100i. I usually run mine 24/7 at 4.0ghz with -.07 offset (usually 1.145v load in cpuz) StinkingHomo posted:Thanks for the tips, I'll definitely try to go higher. Been running Prime95 for ~6 hours now with no errors, temps have settled near ~65. I have one more question though, task manager shows speed as 5.90-96 GHz, while maximum speed is at 4.5 GHz. What does 5.9 GHz that the task manager is showing mean? That sounds unusual. Are you overclocking in the bios or in windows? If windows, try to do it in the bios instead. Otherwise, it could be a sign of an instability issue. Try running more voltage and see if it goes away. For example, I've had task manager show incorrect ram quantity when running too low voltage on my Phenom II 965BE. If you are passing p95 but still having strange task manager speeds you must have instability somewhere. Try throwing other stability tests at it as well like Intel Burn Test, Linx, OCCT, Intel Extreme Tuning Utility. amp281 fucked around with this message at 13:27 on Apr 2, 2013 |
# ? Apr 2, 2013 13:20 |