|
api call girl posted:Spoiler alert: the monti spongodes was winning, so I pulled the nem out and am now nursing it in the other tank with pellets and krill. Lameeeee. One of mine won against an acro branch yesterday stupid nems
|
# ? Mar 21, 2013 07:23 |
|
|
# ? Jun 12, 2024 22:17 |
|
Showing some hermit crab love. How could anyone not love him I started this tank in late October and found these little guys just last night. After some internet investigating I believe they are harpacticoid copepods. I'm not certain of that. If it is, apparently I'm doing something really right! At first I freaked out because I couldn't really see them clearly. They sure scoot around quickly. They only thing I added in the last month is the gsp that my crab is picking at in the picture above. I added the gsp about a week ago. e: That is the best picture I could muster of the pods or whatever. Warsteiner fucked around with this message at 14:31 on Mar 22, 2013 |
# ? Mar 22, 2013 14:27 |
It's possible they hitched in on your GSP rock, assuming you started clean with dry rock and substrate and just did regular cycling since October.
|
|
# ? Mar 22, 2013 14:32 |
|
I'm not really clear on the SW lingo yet but I think I understand what you're saying. I started with live rock and live sand. Check on the regular cycling!
|
# ? Mar 22, 2013 17:11 |
|
My 40g tank last August, a couple weeks after moving from my 14g: My tank a few weeks ago, almost 8 months later. (The chalice on the right of the tank got so huge that I had to frag about 1/3rd of it to clear space for the new SPS in front) I'm currently battling hair algae and diatoms for some unknown reason. My water parameters are fine... but I had been adding iodine over the last few months and may have overdone it. My few soft corals were dying and I read that it may be a lack of iodine... but read later that iodine can cause algae blooms so it may be that. Overall things have been good though. I'm noticing that my SPS is growing fast, but browning. The tank is lit by a KeefKoi Evo150 LED, but I'm thinking about adding supplemental T5s (or I could add more LEDs... Thoughts?) Gambl0r fucked around with this message at 19:24 on Mar 24, 2013 |
# ? Mar 24, 2013 18:31 |
SPS might brown out if you have high nutrients, but then they wouldn't grow fast. They might lose color if you have low iron, but it shouldn't get low if you're doing regular water changes. When did you switch to the LEDs and when did the SPS start browning? The color balance should be pretty good. Are you running the LEDs at full blast?
|
|
# ? Mar 24, 2013 23:18 |
|
api call girl posted:SPS might brown out if you have high nutrients, but then they wouldn't grow fast. They might lose color if you have low iron, but it shouldn't get low if you're doing regular water changes. I've been doing regular water changes - actually 8 gallons weekly for the last six weeks (usually I would do one every other week), to get rid of the drat algae and diatoms (which has not worked). I've had LEDs since the start of this tank and LEDs in the previous tank. I've only had the small SPS in the front of the tank for the last 2-3 months, and I've noticed it slowly starting to get brown over the last two months... you would think the algae and the browning SPS would both point to higher nutrients, but my test kits show 0 nitrate/nitrite/phosphate. A local fish store does free water tests, so maybe I'll bring a sample in just to confirm my test kits aren't way off. Gambl0r fucked around with this message at 02:49 on Mar 25, 2013 |
# ? Mar 25, 2013 02:44 |
My operating theory is that there's some kind of nitrates source in your tank which is getting soaked up by your film/diatom algae and corals, so you can't measure it. High nitrates but not high phosphates--phosphates inhibit skeleton-building in stony corals.
|
|
# ? Mar 25, 2013 04:36 |
Welp, they just announced the AI Sol->Vega upgrade kits this past week or so. Guess I'm getting those. Probably going to start with the one above my 20gal to see how it works first.
|
|
# ? Mar 25, 2013 04:39 |
|
Melchior posted:I just got my WP40 yesterday and got it working. I had only a Koralia EVO 1450gph and Tunze 6045 in my 90g to keep things moving, so my flow left something to be desired. How is the wp40 holding up? I just lost a power head so I am thinking about picking two of these up to replace both of my existing power heads.
|
# ? Mar 25, 2013 20:19 |
|
Any thoughts on this algae? It's started springing up all over, looks kinda like bryopsis but not feathery, and much more firm, almost like that of chaeto. I picked up a tuxedo urchin in hopes that it will eat it, and I've tried raising mag levels to no avail. What is ittttt?
|
# ? Mar 25, 2013 20:48 |
|
SaNChEzZ posted:Any thoughts on this algae? I hope you find out, because I have it too. Trates, phosphates are undetectable, and I'm running purigen, carbon, and Rowa Phos, and doing a 25-40% WC every week to get rid of it, to no avail.
|
# ? Mar 25, 2013 21:28 |
|
Kinda looks like Maiden's Hair algae. Does it all spring up from a central point and grow from there? I'm pretty sure manual removal plus an urchin will take care of it since it doesn't spread magically like
|
# ? Mar 25, 2013 22:43 |
|
Henchman 21 posted:How is the wp40 holding up? I just lost a power head so I am thinking about picking two of these up to replace both of my existing power heads. It hasn't died yet. Has more than taken over for my Koralia Evo 1400 and Tunze 6045. Growth of SPS is good and PE of my millis is good as well.
|
# ? Mar 25, 2013 23:35 |
|
Wandering Orange posted:Kinda looks like Maiden's Hair algae. Does it all spring up from a central point and grow from there? I'm pretty sure manual removal plus an urchin will take care of it since it doesn't spread magically like It does kinda look like that upon googling it, it definitely all springs up from a single holdfast, however, this poo poo is everywhere.
|
# ? Mar 26, 2013 00:05 |
|
Apologies if this has been discussed a million times: How much more intensive is a saltwater setup compared to a freshwater? My parents are looking into starting up a tank, and when they went to look at fish they liked the salt water fish a lot more. I know start up cost/maintenance is quite a bit higher than fresh water tanks, but what exactly goes into a set up? They've got a 30gal tank already, if that makes any difference.
|
# ? Mar 27, 2013 02:55 |
|
rear end Crackers! posted:Apologies if this has been discussed a million times: Short version: Salt and RO water are going to be your biggest expenses for upkeep. Adding coral spikes the up-front cost significantly. Long version: It really depends on what you want to do with it. If you just want a basic saltwater fish only tank, upkeep and maintenance isn't much harder than a freshwater tank. Sure, you've got to make saltwater and have a place to store it prior to water changes, and you should use RO water instead of tap, but other than that a fish only setup is pretty easy to maintain. Just check the salinity regularly and keep up on maintenance and it'll be fine. You can use basic normal output strip lighting for fish only tanks as well. Hang-on-back (HOB) filters can be used with saltwater, so a basic 30g tank isn't much higher to start up. If you add live rock (rock with bacteria in it to convert fish poop to harmless nitrates) its a bit more involved. Not much, though. It really isn't until you start keeping live coral that it gets significantly more complex than freshwater. At that point you've got to maintain several more water parameters to keep everything healthy, and you'll be killing coral and fish pretty frequently until you get the hang of it all. Personally I would recommend, if they had time to devote to it, to set up a Fish Only tank with live rock (FOWLR) tank. This will let them add a small coral or two once they feel comfortable with it if they want. If not, no biggie. The live rock will help keep the water clean. the Pixies fukken SUCKED fucked around with this message at 05:19 on Mar 27, 2013 |
# ? Mar 27, 2013 05:17 |
|
The nitrates in my 50 cube have gone up over the last couple of weeks. I hadn't tested in months because they had been 0 forever but I measured with an API kit and got 5-10 ppm. I did a 10 gallon water change on Saturday, re-tested the next day and got closer to 5 ppm this time (or I'm real lovely and distinguishing those colors). How soon can I do another large water change? Total water volume is probably under 60 gallons and I'd really like to get those nitrates back down to 0. My rainbow monti hasn't been extending its polyps for the last week or so and the red plating monti seems to be losing a bit of its color.
|
# ? Mar 27, 2013 20:37 |
|
If everything is doing alright, I wouldn't worry about it. My tank is consistently at 5-10ppm nitrate and everything is happy as clams, including the clams. Nitrite is the one you really want to be worried about.
|
# ? Mar 27, 2013 21:25 |
|
SaNChEzZ posted:If everything is doing alright, I wouldn't worry about it. My tank is consistently at 5-10ppm nitrate and everything is happy as clams, including the clams. Nitrite is the one you really want to be worried about. Yeah I wouldn't care as much if my rainbow monti didn't start closing up during the same period as when I think the nitrates started going up. I've also got a minor red algae outbreak that I'm thinking might be related.
|
# ? Mar 27, 2013 23:00 |
|
visuvius posted:Yeah I wouldn't care as much if my rainbow monti didn't start closing up during the same period as when I think the nitrates started going up. I've also got a minor red algae outbreak that I'm thinking might be related. Time to count your fish!
|
# ? Mar 27, 2013 23:13 |
|
Can dosers like a Bubble Magus push additives upward? Do they handle head pressure okay?
|
# ? Mar 29, 2013 00:40 |
|
Absolutely. This guy on reefcentral has what I'd consider as a pretty extreme vertical climb and hose length but has no issues at all.
|
# ? Mar 29, 2013 00:55 |
|
Is there such a thing as too much sump? I'm planning on drilling the 12g long mr aqua I have and hooking it up to a sump, the question is how big of a sump. Since the thing is 36" long that gives me a lot of room since I don't mind having a stand considerably deeper than the tank itself, since petco is currently having their $1/gal sale on tanks I was considering getting a 29 gallon since that will still be ~6" shorter than the width of the tank, and I hope to have a stand that will be taller than the 18" of height a 29 requires; or would just a 20L be easier to manage with the same width/legnth but lower height.
|
# ? Apr 1, 2013 20:18 |
|
Gillingham posted:Is there such a thing as too much sump? [...] would just a 20L be easier to manage with the same width/legnth but lower height. In theory, the more water volume, the better - so a sump really couldn't be 'too large'. But, it could definitely be too large for the stand you're putting it in. I wasn't able able to use a 20 Long in my stand because it wouldn't physically fit through the doors... So I went with a 20 Tall. This worked, but later I found it's impossible for me to remove my skimmer without disassembling it in place, in the sump. Even then, I have to turn it completely horizontal to get it over the wall of the tank and out the doors of the stand. Just keep in mind the height of the equipment you'll have in the sump.
|
# ? Apr 1, 2013 20:37 |
Also consider equipment you will have OUTSIDE the sump (and therefore, probably, outside the stand itself). Right now I have, outside the stand: controllers, UPS/misc electronics, biopellet reactor, kalk stirrer, calcium reactor/co2 tank, ATO tank. With SOME better planning on my part WRT stand and sump, a couple of those items probably could've fitted inside the stand.
|
|
# ? Apr 2, 2013 13:59 |
|
I guess steps I should be taking first are then: 1. Obtain equipment 2. Build/obtain stand 3. get sump then? The tank is really all I have currently, since this is my first saltwater project I'm not sure where to go equipment wise. Re: biopellets, is this a new thing in the hobby, does it have advantages over just using a bunch of live rock in the sump, etc? I spent some time reading about zeo reactors last night but most of everything I've read is purely subjective with no real comparisons.
|
# ? Apr 2, 2013 18:40 |
|
Gillingham posted:I guess steps I should be taking first are then: some people have issues with them, others dont. I had a non stop diatom bloom regardless of how little i used them but YMMV Honestly I would worry about getting good rock and good sand before you start getting extra things like pellet reactors and such. First bit of extra equipment I would buy (after powerheads, pumps and a good heater) would be a protein skimmer.
|
# ? Apr 2, 2013 19:17 |
Odds are with a 12gal a protein skimmer is all you end up needing. I would not use rocks in the sump as they end up being a detritus trap more often than not (pay no attention to the fact that I have a ton of rubble in my sump, do as I say not as I do--I was busy with other stuff for 5-6 weeks last year and half my sump dried up when my ATO pump broke and all that rubble resulted in a massive die-off that I'm still dealing with the aftereffects of even today) and a biopellet reactor that gets clogged can be far worse a disaster than anything you avert by having one. e: WHY YES, I HAVE HAD ALL THIS HAPPEN AT ONE TIME OR ANOTHER. VAGENDA OF MANOCIDE fucked around with this message at 22:08 on Apr 2, 2013 |
|
# ? Apr 2, 2013 19:54 |
|
I posted on here a while back about a mini maxi anemone that I couldn't get rid of and ultimately tried to murder with Apstasia-X. I pumped it full of the stuff and let it sit for a while. It seemed like the application destroyed the thing. I turkey basted what was left of him out of the nook in the rock he had anchored and called it a day. Well, a couple of months later, the motherfucker has returned. These God drat things are indestructible. Its a bit smaller, and a bit whiter, but its there. Time for round 2.
|
# ? Apr 2, 2013 23:32 |
|
visuvius posted:I posted on here a while back about a mini maxi anemone that I couldn't get rid of and ultimately tried to murder with Apstasia-X. I pumped it full of the stuff and let it sit for a while. It seemed like the application destroyed the thing. I turkey basted what was left of him out of the nook in the rock he had anchored and called it a day. 1)Clean off the rock 2)Get some water boiling...
|
# ? Apr 3, 2013 22:25 |
|
Jonny Nox posted:1)Clean off the rock Just make sure there aren't any palys on the rock first. Dont need you to die on us
|
# ? Apr 4, 2013 00:50 |
|
Henchman 21 posted:Just make sure there aren't any palys on the rock first. Dont need you to die on us Hahaha yeah this is not going to work. The rock has a huge xenia colony on it as well as some GSP and zoanthids. That's why I had to specifically hit just him with the apstasia-x. I am never, ever loving with mini-maxis again.
|
# ? Apr 4, 2013 01:01 |
|
visuvius posted:I am never, ever loving with mini-maxis again. Was it bothering/killing other coral? What was the reason to get rid of it?
|
# ? Apr 4, 2013 02:44 |
|
Gillingham posted:I guess steps I should be taking first are then: Make sure an RO/DI unit is on your equipment list
|
# ? Apr 4, 2013 02:50 |
|
Gambl0r posted:Was it bothering/killing other coral? What was the reason to get rid of it? It murdered an awesome Picasso clown and another fish. I tried a ton of different methods to get rid of it but the fucker didn't budge.
|
# ? Apr 4, 2013 06:07 |
|
visuvius posted:It murdered an awesome Picasso clown and another fish. I tried a ton of different methods to get rid of it but the fucker didn't budge. Chisel the rock?
|
# ? Apr 4, 2013 07:23 |
|
visuvius posted:It murdered an awesome Picasso clown and another fish. I tried a ton of different methods to get rid of it but the fucker didn't budge. I've had some luck with applying superglue gel to the area with smaller ones.
|
# ? Apr 4, 2013 20:23 |
|
So these came today, Apparently I should not do math when I am drunk. One of these is more then enough flow in my tank. I cant even run half of the programs using the 24 power supply they give you with it. Very impressed overall, thanks to Melchior for turning me on to it otherwise I would have probably never known it existed. If anyone wants my second one shoot me a pm, I'll save you the $26 shipping from Hong Kong
|
# ? Apr 9, 2013 01:55 |
|
|
# ? Jun 12, 2024 22:17 |
|
I recently got a salt water fish tank and lots of fish: Hawaiian Yellow tang - yellow fellow Australian black clown x 2 Sailfin goby (Phillipines) Royal gramma - Purple and yellow fish (Caribbean) Bicoloured blenny - One that likes the rock. Emperor Angelfish Bird Wrass Moon Wrass Spotted Mandarin Axilspot Hogfish Invertibrates: 5 blue leg hermits (Haiti) Turban/turbo snails (Indonesia) Algae snail 2x Red Fromia Starfish Everything has been going great except for the starfish, who looked fine when I got them but now they have pink goop coming out of parts of their arms. Is there anything I can do? It's only been 3 days since I got them. It doesn't look good.
|
# ? Apr 9, 2013 02:42 |