|
jamal posted:Or just shop by size. You can get an older set of oe 16" alloys for dirt cheap on nasioc. You may think I am terrible for it, but I kind of want a NASCAR style rim.
|
# ? Apr 5, 2013 02:45 |
|
|
# ? May 25, 2024 11:02 |
|
No, that would be awesome. Unfortunately NASCAR spares are 5x5 (5x127mm)
|
# ? Apr 5, 2013 04:00 |
|
Diamond Racing makes steel wheels in a few different styles, including traditional NASCAR, in pretty much any bolt pattern. You can go super crazy with a custom wheel, pretty much every size, shape and bolt pattern you could want, or get a normal off the shelf one. Downside is the price, they're expensive for steelies. edited misleading link Terrible Robot fucked around with this message at 04:21 on Apr 5, 2013 |
# ? Apr 5, 2013 04:16 |
|
Terrible Robot posted:Downside is the price, they're expensive for steelies. Expensive for steelies but cheap for custom wheels though.
|
# ? Apr 5, 2013 15:40 |
|
Terrible Robot posted:Diamond Racing makes steel wheels in a few different styles, including traditional NASCAR, in pretty much any bolt pattern. You can go super crazy with a custom wheel, pretty much every size, shape and bolt pattern you could want, or get a normal off the shelf one. Downside is the price, they're expensive for steelies. It's funny, a guy on Forza beat you to the punch by like ten minutes.
|
# ? Apr 5, 2013 16:26 |
|
Pulling the trigger tomorrow on a 2013 WRX if things work out.
|
# ? Apr 5, 2013 19:52 |
|
My friend's GC is in import tuner this month: This made me laugh
|
# ? Apr 5, 2013 21:38 |
|
Gentlemen, I fear the wheel project is a bust. The 3.6 comes with bigger brakes.
|
# ? Apr 5, 2013 21:50 |
|
Thanks, Subaru, for making the easiest wheel bearing removal I've ever done. Now I just need Fedex to deliver my new assembly, as well as my pads and rotors. Ugh.
|
# ? Apr 5, 2013 21:56 |
|
PitViper posted:Thanks, Subaru, for making the easiest wheel bearing removal I've ever done. Now I just need Fedex to deliver my new assembly, as well as my pads and rotors. Ugh. The unit bearing is nice. But two things with that job really piss me off. The loving bolts for the caliper bracket... WHAT THE gently caress SUBARU!! They're completely inaccessible (at least on the 00-04). horrible design. And then that backing plate. That should be bolted on separate to the bearing. Because installing a new bearing you have to line up the backing plate and the bearing at the same time while trying to get a bolt threaded in. Of course the bolts are in a fuckoff annoying place. So yay rear unit bearings, gently caress the execution.
|
# ? Apr 5, 2013 22:04 |
|
jamal posted:My friend's GC is in import tuner this month: When the magazines come after me I'll do the same thing. You'll be the hottest thing in Mildly Modified Daily Drivers Monthly.
|
# ? Apr 5, 2013 22:26 |
|
I want Jamal spec stickers for my rally car
|
# ? Apr 6, 2013 01:50 |
|
jamal posted:My friend's GC is in import tuner this month Oh cool, Ryan's team! Do you have the rest of the article?
|
# ? Apr 6, 2013 02:31 |
|
McSpatula posted:Oh cool, Ryan's team! Do you have the rest of the article? Yeah but I'm not going to scan it or anything. It's in stores everywhere. Oh and I think this is the origin of the term. Kind of funny: http://forums.nasioc.com/forums/showthread.php?t=1673954 I even made a logo but I can't find it. jamal fucked around with this message at 18:17 on Apr 6, 2013 |
# ? Apr 6, 2013 09:15 |
|
chrisgt posted:The unit bearing is nice. But two things with that job really piss me off. The loving bolts for the caliper bracket... WHAT THE gently caress SUBARU!! They're completely inaccessible (at least on the 00-04). horrible design. Mine's an '05 LGT, and yea the caliper bracket bolts are poo poo for accessibility. Not really THAT bad, but I had to play with a few different extensions to get a decent range of ratchet motion. Reassembly wasn't bad, though. I stuck all 4 bolts in the holes, put the shield on, then started the bearing one bolt at a time, just a few turns each. Dinner time came before I finished, I'm going to bolt the caliper brackets on now, then reinstall the calipers and bleed the brakes.
|
# ? Apr 6, 2013 15:37 |
|
PitViper posted:Mine's an '05 LGT, and yea the caliper bracket bolts are poo poo for accessibility. Not really THAT bad, but I had to play with a few different extensions to get a decent range of ratchet motion. Reassembly wasn't bad, though. I stuck all 4 bolts in the holes, put the shield on, then started the bearing one bolt at a time, just a few turns each. Dinner time came before I finished, I'm going to bolt the caliper brackets on now, then reinstall the calipers and bleed the brakes. It probably helps that yours isn't a complete ball of rust like what I work with in Maine..
|
# ? Apr 6, 2013 19:37 |
|
chrisgt posted:It probably helps that yours isn't a complete ball of rust like what I work with in Maine.. Hey, I'm in MN. We definitely do "balls of rust" as well as anyone. Not sure how many winters this one has seen, though. Definitely not driven every winter like I'm planning on doing.
|
# ? Apr 6, 2013 22:27 |
|
Something followed me home today.. I have no words for how awesome that car is. Amazing.
|
# ? Apr 7, 2013 01:34 |
|
Wifey has a new job across town and doesn't want the SVX as it chews fuel : ( Need to sell it and find something as cool, maybe a little less futuristic...
|
# ? Apr 7, 2013 12:26 |
|
kaws! posted:Wifey has a new job across town and doesn't want the SVX as it chews fuel : ( Need to sell it and find something as cool, maybe a little less futuristic... I'd aim for the early post WWII mentality, before them bra burning hippies gave the rest of them all those uppity, progressive, and revolutionary thoughts.
|
# ? Apr 7, 2013 15:51 |
|
I'd just like to say that the front serpentine belts on my Subaru (96 legacy) are like the most cleverly designed things in the world and I wish I could hug the engineer who set that whole thing up, easiest fix ever. The guy who thought every single other part of the car you're trying to remove should have 5 easily accessible 10mms bolts and then one 10mm that is COMPLETELY IMPOSSIBLE TO REACH and then one random hex screw should eat a loving bullet though Jesus Christ. Working on Subarus is like 25% "wow that's really clever, simple and neat" and 75% "why the gently caress would you do this god damnit I hate Subarus" with no in-between at all it's bizarre
|
# ? Apr 7, 2013 18:15 |
|
yyyyyy posted:Working on cars is like 25% "wow that's really clever, simple and neat" and 75% "why the gently caress would you do this god damnit I hate cars" with no in-between at all it's bizarre Fixed. Unless we're talking about cars that were designed to be worked on by the every-man (the 2CV; original Beetle), pretty much every car is like this. A few things that are really well thought out and easy to work on, and a shitload of stuff that makes you want to dowse the whole car in gasoline and light a match. This is the reason why every other car-person I have met is insane in some fashion. You have to be to enjoy working on cars. VVV E: The above is all true until, like Wrar said, you figure out the trick to it. Then it's more like a 60% easy 40% infuriating. Finding the trick is usually what makes people insane. Terrible Robot fucked around with this message at 20:06 on Apr 7, 2013 |
# ? Apr 7, 2013 19:28 |
|
yyyyyy posted:I'd just like to say that the front serpentine belts on my Subaru (96 legacy) are like the most cleverly designed things in the world and I wish I could hug the engineer who set that whole thing up, easiest fix ever. The guy who thought every single other part of the car you're trying to remove should have 5 easily accessible 10mms bolts and then one 10mm that is COMPLETELY IMPOSSIBLE TO REACH and then one random hex screw should eat a loving bullet though Jesus Christ. Working on Subarus is like 25% "wow that's really clever, simple and neat" and 75% "why the gently caress would you do this god damnit I hate Subarus" with no in-between at all it's bizarre Generally speaking, if you are having trouble with a Subaru you haven't figured out whatever trick it is to get the job done easily.
|
# ? Apr 7, 2013 19:39 |
|
Wrar posted:Uh you haven't wrenched much on not Subarus have you. 90% is easy. The only easier car I've had was a Miata. This. Subarus are a loving cake coming from mustangs and jeeps. I did sparkplugs on an LT1 4th gen camaro ONCE. Never again. Subarus for days.
|
# ? Apr 7, 2013 23:39 |
|
Slow is Fast posted:This. Subarus are a loving cake coming from mustangs and jeeps. I did sparkplugs on an LT1 4th gen camaro ONCE. Never again. Subarus for days. I can't agree with this enough. I've wrenched on various domestic makes for years, only recently owning a Subaru. Aside from the rust welding you see on all cars in the northeast, it has been moderately easier performing work on the Subaru than other vehicles I've owned.
|
# ? Apr 8, 2013 12:59 |
|
Put my summer tires on this weekend and noticed the factory end link bushing rubber looks pretty sad. I have the stock sway bar, any recommendations for end link kits? I'm thinking Whiteline. Anything else I should do while I'm in there? My Forester has a completely stock suspension setup. It's my daily ride and I don't do anything like autocross.
|
# ? Apr 8, 2013 13:25 |
|
LordOfThePants posted:Put my summer tires on this weekend and noticed the factory end link bushing rubber looks pretty sad. I have the stock sway bar, any recommendations for end link kits? I'm thinking Whiteline. Anything else I should do while I'm in there? My Forester has a completely stock suspension setup. It's my daily ride and I don't do anything like autocross. If you want to go cheap, just get cheapos off rock auto.
|
# ? Apr 8, 2013 13:27 |
|
I'm more concerned with quality over cost. It doesn't look like a difficult job, but I don't want to have to get under there every other week to re torque stuff. Did a little research this morning and ordered some Rallitek end links. Was just going to do the fronts but since shipping was $20 I bought rears too so I didn't end up paying it twice if I decided to replace them in the future.
|
# ? Apr 8, 2013 14:28 |
|
I would have suggested stock ones too. Look how long your originals lasted that you never had to touch. Now you get stiffer bushings and a solid link? That translates to no noticeable difference on a stock car. Cancel it and save
|
# ? Apr 9, 2013 02:56 |
|
How much clearance do I need between my Header and my Skidplate? I have the primitive racing plate, but I think it hangs too low. daslog fucked around with this message at 15:22 on Apr 9, 2013 |
# ? Apr 9, 2013 14:37 |
|
daslog posted:How much clearance do I need between my Header and my Skidplate? I have the primitive racing plate, but I think it hangs too low. Because of the movement of flat fours the headers tend to extend out so it may rub without proper clearance.
|
# ? Apr 9, 2013 15:59 |
|
Yakattak posted:Because of the movement of flat fours the headers tend to extend out so it may rub without proper clearance. And the proper clearance is?
|
# ? Apr 9, 2013 17:03 |
|
That seems like it would be enough clearance for me assuming the back side of the skidplate is bolted down. Try putting some chalk or something on the inside of the skidplate and then driving around like a maniac and seeing if any of it rubs off on the header.
|
# ? Apr 9, 2013 17:35 |
|
Seat Safety Switch posted:That seems like it would be enough clearance for me assuming the back side of the skidplate is bolted down. I want to reduce the distance to the absolute minimum between the Header and plate. I do agree that there is currently more than enough clearance now, but I would like the skid plate to be higher off the ground.
|
# ? Apr 9, 2013 18:28 |
|
daslog posted:And the proper clearance is? Depends on the situation and size of the headers but I'd do the chalk idea until you get it dialed in. Just do a couple WOT pulls to make sure.
|
# ? Apr 9, 2013 19:21 |
|
Yakattak posted:Depends on the situation and size of the headers but I'd do the chalk idea until you get it dialed in. Just do a couple WOT pulls to make sure. Makes sense. Thanks.
|
# ? Apr 9, 2013 19:25 |
|
daslog posted:How much clearance do I need between my Header and my Skidplate? I have the primitive racing plate, but I think it hangs too low. I'd rig something up with washers and then add/remove them as you hear it bang or see scratches. I think it's the perspective but it does look low.
|
# ? Apr 9, 2013 21:43 |
|
I'll be curious to see what this thing can really do once it hits 1k on the clock and I can turn it loose. It's bloody loving fast short shifting it at 4k now. God I love that cluster. Farking Bastage fucked around with this message at 23:21 on Apr 9, 2013 |
# ? Apr 9, 2013 22:41 |
|
Farking Bastage posted:I'll be curious to see what this thing can really do once it hits 1k on the clock and I can turn it loose.
|
# ? Apr 9, 2013 22:57 |
|
|
# ? May 25, 2024 11:02 |
|
daslog posted:And the proper clearance is? Depends. Plan on hitting anything and bending the skidplate? 1 cm should be enough, depending on the quality of your engine mounts. That plate really looks like it's going to have clearance problems on the headers and always be too low.
|
# ? Apr 10, 2013 01:11 |