|
Maybe you can find an Epiphone Century and put a P90 on the neck? /edit: welp, those aren't in production anymore either.
|
# ? Apr 10, 2013 18:45 |
|
|
# ? Jun 5, 2024 03:53 |
|
The Loar makes one pretty similar http://www.theloar.com/products/archtop-guitars/archtop-acoustic-lh-309-vs I have no experience with their guitars, just saw an ad somewhere
|
# ? Apr 10, 2013 19:03 |
Nigel Tufnel posted:Final edit: so looks like he had a vintage Gibson ES-125. And, yep, I can't afford one. Gaze on its beauty. I have wanted one for a while but yeah pricey as hell.
|
|
# ? Apr 10, 2013 19:20 |
|
Does anyone find that 20 amp outlets make guitars hum much worse than 15 amp? In my studio we have all 20 amp circuits and there my guitar has a noticeable 60 cycle hum that I don't get at home. It makes recording overdriven guitar parts impossible. Am I making this up? Could there be something I'm over looking?
|
# ? Apr 11, 2013 00:55 |
|
HollisBrown posted:Does anyone find that 20 amp outlets make guitars hum much worse than 15 amp? In my studio we have all 20 amp circuits and there my guitar has a noticeable 60 cycle hum that I don't get at home. It makes recording overdriven guitar parts impossible. Does it happen with other guitars? You'd think a studio would have stellar wiring to prevent just such things from happening
|
# ? Apr 11, 2013 01:45 |
|
HollisBrown posted:Does anyone find that 20 amp outlets make guitars hum much worse than 15 amp? In my studio we have all 20 amp circuits and there my guitar has a noticeable 60 cycle hum that I don't get at home. It makes recording overdriven guitar parts impossible. How close is the nearest large power transformer? 5A of difference isn't going to cause that much EMI in regular usage because the inductance of your amps and mics is usually pretty low. But then again EM fields are pretty much magic so that buzz is going to be tough to pinpoint, it very well could just be that the power quality at your studio is more inductive than at your home.
|
# ? Apr 11, 2013 03:24 |
|
Nigel Tufnel posted:I saw someone playing an amazing looking Gibson at an open mic last night but I can't find it anywhere. A company called "The Loar" makes one that is very nice and made to exact specs from instruments made by Gibson in the '40's and '50's. I've had the pleasure of trying out an acoustic archtop that they made and it was exquisite. Godin also makes one that is very nice to play, but it isn't made to exact specs like The Loar guitars are. They are called 5th Avenue Kingpins, I think.
|
# ? Apr 11, 2013 04:37 |
|
I've got this acoustic guitar, an Ovation CC48. I bought it partially because I liked the sound of it, and partially because I was planning on bringing it to an extremely dry climate and I was hoping that it would have less issues there due to the plastic components. I've been keeping it out in essentially 0% humidity for a few months now, and it seemed like it might be having some intonation issues due to the environment so I decided to start keeping it in a case with an improvised humidifier in it (just a wet cloth, that's all I have at my disposal). I think I've gone too far though, after keeping it humidified for a few days the action is totally messed up. It's low enough that if I bar a chord around the 5th fret it's just a mess of fret buzzing now. Does this make sense? I kinda thought that more humidity would make the neck more pliable and you'd end up with higher action as it curves in with the strings, but apparently the opposite happened here. I also thought that more humidity was always good for instruments, which I've now learned is definitely not the case. Also, what are my options for fixing this? I have money to spend on repairs in the future, but I can't get it to a shop for the next ~6 months and it would be nice to have it more playable in the short term without doing something that would jeopardize getting it repaired properly later.
|
# ? Apr 11, 2013 04:43 |
|
I bought a Tremol-No the other day and it works great. My concern is, though, that the Deep C thing doesn't seem so tight, so I'm worried that if I drop D and accidentally press a good bit down on the bridge that it'll slide and gently caress up my tuning. Anyone got any ideas for making it more stable?
|
# ? Apr 11, 2013 12:02 |
|
I'm thinking about getting into seven or eight string guitars. I've never played either (even to try out), I'm not a huge metal guy, and I recognize that this may be crazy (I really want it for the extended range--an extra octave would be amazing). What do I need to do before I go down this terrible expensive path?
|
# ? Apr 12, 2013 03:00 |
|
It doesn't have to be that expensive, really. Unless, like, all you play is used Squiers. I'd say the biggest thing to remember with sevens is that it's just a guitar. A guitar with one more string, but still a guitar.
|
# ? Apr 12, 2013 03:02 |
|
Also the scale lengths are slightly longer. Because of this and the extra string they feel weird to me and I can't fuckin stand them. But I'm opinionated as gently caress on a lot of things and hate drop-d, coated strings, and extra string guitars to say the least. If you're looking for a 7 string for the extra range go for it, I think they sound really muddy but it seems like you won't notice a huge difference because you're not playing metal.
|
# ? Apr 12, 2013 03:35 |
|
Francostein posted:Also the scale lengths are slightly longer. Because of this and the extra string they feel weird to me and I can't fuckin stand them. But I'm opinionated as gently caress on a lot of things and hate drop-d, coated strings, and extra string guitars to say the least. If you're looking for a 7 string for the extra range go for it, I think they sound really muddy but it seems like you won't notice a huge difference because you're not playing metal. This is me 100%. I have a really nice 7 string and a great 8 string and they're both really just kind of annoying to me. Even a long scale will give you mud unless you manage to have a flawless setup, and the bigger strings sound lovely and boomy past the tenth or so fret no matter what. If you REALLY want the extra range per position then go for it but as someone who went through a huge extended range/prog/djent phase, just no. The reality is that you won't really get a very handy extended range but just more ways to play chords and and an easier path to extend runs across the fretboard. I'm all about consistent sounding instruments across every fret and the 4 string bass / 6 string guitar combo is really perfect. Try them out before you buy and make sure it's something you really want.
|
# ? Apr 12, 2013 03:50 |
|
7 and 8 strings are pretty neat and it'd be interesting to hear them in a non-Djenty or Deftones situation. It takes a lot of getting used to. I just use baritones for my adventures in rumblyness, but to each his own.
|
# ? Apr 12, 2013 13:05 |
|
Declan MacManus posted:7 and 8 strings are pretty neat and it'd be interesting to hear them in a non-Djenty or Deftones situation.
|
# ? Apr 12, 2013 14:39 |
|
Charlie Hunter's instrument has eight strings, but I don't think you're going to find one in the shops. It's a five-string guitar and a three-string bass on the same neck with separate pickups and outputs
|
# ? Apr 12, 2013 14:45 |
|
Well, yeah. (Not gonna find many 7-string archtops in shops, either. Not gonna find many archtops period in shops, really. But yeah, you'll still find more than zero.)
|
# ? Apr 12, 2013 14:47 |
|
Yeah when I was typing that I realised it didn't really work, but I went with it anyway drat it! I was just worried someone was going to come back and say 'oh Charlie gave that up and now he uses a normal 8 string with EMGs'
|
# ? Apr 12, 2013 14:59 |
|
Haha, well, I guess the broader lesson is still that if you're looking for extended range guitars in anything other than metal, you're not looking at guitars you can approximate for $600 from a shop. (Unless we're both surprised and he's using EMGs now...)
|
# ? Apr 12, 2013 15:16 |
|
Pyrthas posted:Haha, well, I guess the broader lesson is still that if you're looking for extended range guitars in anything other than metal, you're not looking at guitars you can approximate for $600 from a shop. (Unless we're both surprised and he's using EMGs now...) You can use EMGs in non-metal genres... There's nothing inherently "metal" about the widely available ERGs except looks
|
# ? Apr 12, 2013 15:29 |
|
TopherCStone posted:You can use EMGs in non-metal genres... Two of their earliest endorsees were David Gilmour and Mark Knopfler. The flat frequency response thing was all over 80s adult contemporary.
|
# ? Apr 12, 2013 16:01 |
|
watt par posted:Two of their earliest endorsees were David Gilmour and Mark Knopfler. The flat frequency response thing was all over 80s adult contemporary.
|
# ? Apr 12, 2013 16:04 |
|
Remulak posted:poo poo, I thought that was the introduction of the compressor pedal. It's both! (DynaComp makes me think of Belew though which is not quite adult contemporary) I don't mind EMG single coils but I kind of hate the humbuckers and I could not tell you why.
|
# ? Apr 12, 2013 16:09 |
|
I have an old-rear end Yamaha neckthru with some EMGs (HSS setup). Sadly, they aren't the sweet ones with four wires, just hot, ground and power, but they sound amazing and that guitar just gets this great piano tone with overtones everywhere. Definitely not just metal pickups.
|
# ? Apr 12, 2013 16:19 |
|
Washburn has EMGs in their new thinline hollowbody and it is smoooooooth.
|
# ? Apr 12, 2013 16:28 |
|
Declan MacManus posted:I don't mind EMG single coils but I kind of hate the humbuckers and I could not tell you why. Because they make everything sound like an EMG humbucker. Slap 'em on a 2x4 and it'll sound like EMGs.
|
# ? Apr 12, 2013 17:16 |
|
watt par posted:Because they make everything sound like an EMG humbucker. Slap 'em on a 2x4 and it'll sound like EMGs. When I realized this and started playing passive instruments it felt like someone took a blanket off of my equipment. Actives and EMGs have a place no doubt but they're so boring if you ask me. It's kind of scary how much I've changed since my metal days when it comes to the way I like to form my tone.
|
# ? Apr 12, 2013 18:04 |
|
Zuhzuhzombie!! posted:Washburn has EMGs in their new thinline hollowbody and it is smoooooooth. Do you have any clips? I want to believe (also I'm always up for hearing new ways to use pickups)
|
# ? Apr 13, 2013 00:50 |
|
Declan MacManus posted:Do you have any clips? I want to believe (also I'm always up for hearing new ways to use pickups) https://www.youtube.com/user/GuitarfetishTV ... okay, well, it's their new actives. And some pedals. They're really cranking these out.
|
# ? Apr 13, 2013 01:09 |
|
EMG 89r and 81TW sound pretty good even in full humbucker mode, it's probably my imagination but they sound a lot better than the regular 81/85 even though they're supposed to be identical except for the option to do coil splitting. I'd take the H4 set over either though, passive version with wiring available for coil split and about £20 cheaper per pup. https://www.youtube.com/watch?v=uDqEfXbXkUk Similar subject, anyone able to suggest a UK/EU retailer for quality push/pull pots? My local stores are being less than helpful for orders <£50.
|
# ? Apr 13, 2013 16:31 |
|
Is there any way to set a default save folder for recording in Amplitube? When I hit that record button, I want to play and record, not dig from the absolute top level of my directory structure every single time.
|
# ? Apr 14, 2013 05:35 |
|
Professor Science posted:I'm thinking about getting into seven or eight string guitars. I've never played either (even to try out), I'm not a huge metal guy, and I recognize that this may be crazy (I really want it for the extended range--an extra octave would be amazing). What do I need to do before I go down this terrible expensive path? You should probably do what I did and go to Rondo and get a $175 Grendel. I got the 725 NAT earlier this week and after finally having time this morning to dick around on it, I was going to come post about it anyway. It's a good guitar! The frets came dressed, the natural finish is pretty (natural finish + neck without inlays = success), it came with good enough intonation and action that I could just start playing it. The neck is fat and wide and reminds me of playing 5-string bass and just like it you adjust in time. By the way, I also had never played a seven string before and I also have very little interest in playing metal. The downsides of that cheap guitar: one of the knobs was drilled and placed off-center from its indentation, the neck pocket has a little space showing around the edges, and the pickups are some woeful humbuckers. That said, it's fun to play even though I'm more clueless than usual. Oh, nuts, GFS doesn't make pickups for seven stringers do they? Manky fucked around with this message at 13:45 on Apr 14, 2013 |
# ? Apr 14, 2013 13:41 |
|
Manky posted:You should probably do what I did and go to Rondo and get a $175 Grendel. I got the 725 NAT earlier this week and after finally having time this morning to dick around on it, I was going to come post about it anyway. It's a good guitar! The frets came dressed, the natural finish is pretty (natural finish + neck without inlays = success), it came with good enough intonation and action that I could just start playing it. The neck is fat and wide and reminds me of playing 5-string bass and just like it you adjust in time. Yeah, cheap pickups are hard to come by for ERGs. You might try giving Bill at Wilde Pickups a call; he does great work and he's been known to do some one-off or nonstandard designs for people at a pretty reasonable price. He might need measurements of the pickups but I bet he'll hook you up
|
# ? Apr 14, 2013 15:09 |
|
Manky posted:Oh, nuts, GFS doesn't make pickups for seven stringers do they? I'm curious to see what would happen if you put a standard blade pickup under a seven string. Think it would work?
|
# ? Apr 14, 2013 15:23 |
|
It'd work fine if it was wide enough. That's the problem though, not really wide enough.
|
# ? Apr 14, 2013 16:48 |
|
Thanks for the tip Topher, if I look to get something custom I'll look him up. I also thought about getting a blade but I think you'd either lose one string or half of two. Guess it's time to dial up the fuzz...
|
# ? Apr 14, 2013 17:17 |
|
GFS pickups are just rebranded Artecs, who make a 7-string pickup. They're like $20 on ebay.
|
# ? Apr 14, 2013 19:24 |
|
Ugh. The problem with a twelve-string (especially one that needs bridgework, like mine) is that by the time you're done tuning the drat thing, you're basically ready to put it down again.
|
# ? Apr 15, 2013 04:26 |
|
GFS are not rebranded Artecs. We've had someone in this thread go over the difference. http://www.seymourduncan.com/products/electric/humbucker/78-string/8_string_pegasu/ On the other hand, not cheap, but hey, look what we have here. http://www.seymourduncan.com/products/electric/humbucker/78-string/
|
# ? Apr 15, 2013 12:04 |
|
|
# ? Jun 5, 2024 03:53 |
|
Huh, I didn't know that about Artecs. I bought an Entwhistle Dark Star 7 for the bridge and unless someone can tell me it's a bad idea, I'm going to put this Seymour-Duncan single coil in the neck.
|
# ? Apr 15, 2013 13:03 |