|
When I picked up my DRZ, I got given the original off-road mudguard. Which was interesting because I wasn't expecting it and I'd just pillioned 150 miles to pick up the bike. Cue me riding 150 miles with said mudguard ratchet-strapped and duck taped-to my back.
|
# ? Aug 9, 2013 21:59 |
|
|
# ? May 24, 2024 18:49 |
|
I also have a complete stock DRZ exhaust laying around.
|
# ? Aug 10, 2013 11:02 |
|
So I started installing my Trail Tech Vapor this past weekend, but I ran out of time midway through. It turns out that when I ordered the "stealth" model (#752-102) Amazon sent me the silver model (#75-102) in a mislabeled package. After I emailed them back, they overnighted the black model. Now, that I have both, I think the silver model looks better with my hand guards. Anyway, all that I have left to do for the Vapor is to install the water temp sensor and the tach sensor. Everyone on the KTM forums installs the water temp sensor behind the thermostat which doesn't make a lot of sense to me. If you do this, you won't know if the thermostat is failed and the bike is really overheating. It would make more sense to put it in the coolant loop that circulates coolant through the head (#2 in the photo I found), but I'm not sure what direction the other lines flow. Do any of you all know? The only difficulty with the Vapor is that the wire for the temp sensor is pretty short, so I'll have to splice in some additional length to get it up to the gauge. After this I'll finally get around to checking my valve clearances, attempting to fix an oil leak, and get the bike ready for a track day once the weather in Texas cools down a little.
|
# ? Aug 13, 2013 06:40 |
|
MetaJew posted:So I started installing my Trail Tech Vapor this past weekend, but I ran out of time midway through. Are you returning the stealth? I've been thinking about getting a trailtech recently.
|
# ? Aug 13, 2013 16:16 |
|
So I bought the KLX400 I was talking about last week, and I'm making a trip down to Sydney on the weekend to pick up gear from a bigass store that's been recommended, what should I add to the shopping list for the bike itself? It's pretty much bone stock other than a staintune exhaust (full exhaust, not a slip-on as far as I can tell) and the airbox mod hasn't been done. The carb may have been rejetted for the exhaust at the altitude I'm at, if I wanted to cut the hole in the airbox I guess I'll need to find out what size jets are currently fitted and upsize it to compensate for the increased airflow? How do I tell what's currently fit if the PO has no idea? (He got a dealer to fit the pipe, no idea if they touched the carb but it seems to run well.) It needs a new tank/pannier bag as the old one is ripped. Also a set of sliders would be a good idea to limit damage if/when I drop it. This bike also only comes with an electric start option, is it possible to buy and fit a kickstarter just in case I kill the battery one day?
|
# ? Aug 14, 2013 01:11 |
Ephphatha posted:So I bought the KLX400 I was talking about last week, and I'm making a trip down to Sydney on the weekend to pick up gear from a bigass store that's been recommended, what should I add to the shopping list for the bike itself? When you take the stock carb out you can remove the jets and read the numbers engraved on them to find out what's what. This is the only way to know. Definitely do the airbox mod. If a dealer installed a pipe I'd be surprised if it doesn't have an air filter and rejet done but you need to confirm these things. There are ways to retrofit the E model kickstart but it's not worth it IMO. It's just adding weight for something you probably won't ever use. You can always bump start the bike if you really run into trouble otherwise buy a battery tender jr and leave the quick connect on the bike for easy charging to prevent accidents from happening. If you do a lot of offroading it may be worth it but otherwise I'd avoid it. Sliders can be made out of a piece of threaded steel rod that will fit through each axle (they're hollow) and a set of skateboard wheels you can find for cheap. Just put washers on either side of the wheels and find small enough nuts and they'll work if you're looking to go cheap. If you want real ones Supermoto Engineering and the like make nice ones.
|
|
# ? Aug 14, 2013 01:20 |
|
Ephphatha posted:Also a set of sliders would be a good idea to limit damage if/when I drop it. Get a set of case savers and some axle sliders, and file/sand the back of the gear shifter as its really sharp from the factory and will punch a hole in your case in a fall. http://www.ebay.com.au/itm/DRZ400-and-KLX400-Engine-Case-Guards-/281028595452 Ephphatha posted:This bike also only comes with an electric start option, is it possible to buy and fit a kickstarter just in case I kill the battery one day? Its possible, you can order the parts from the drz-400k model, but I dont really think its worth the cost, better off spending the money on a better carb
|
# ? Aug 14, 2013 01:39 |
|
Sliders on a dual sport just sound wrong.
|
# ? Aug 14, 2013 01:46 |
They're axle sliders not frame sliders. Combining them with handguards (with an actual guard in them, not just roost guards) helps keep the swing arm / exhaust from getting raped as fast in small falls.
|
|
# ? Aug 14, 2013 01:47 |
|
ought ten posted:Are you returning the stealth? I've been thinking about getting a trailtech recently. Yeah, I got a return label from amazon and I think I'll mail the stealth model back. I would keep it if it had a matte black finish, but its gloss black and looks sort of cheap. You can pick them up on Amazon prime for ~$95.
|
# ? Aug 14, 2013 02:30 |
|
MetaJew posted:Yeah, I got a return label from amazon and I think I'll mail the stealth model back. I would keep it if it had a matte black finish, but its gloss black and looks sort of cheap. Yeah, if they're taking it back for a full refund it doesn't make sense, but I thought I might save us both some money.
|
# ? Aug 14, 2013 02:57 |
|
Just put the Acerbis Supermoto front fender on the DRZ. Looks good, I think it's like 10" shorter over all, and it's more vented in the back. Hopefully should reduce high-speed instability a little bit plus it looks great.
|
# ? Aug 15, 2013 01:26 |
It doesn't do a damned thing in the rain, though.
|
|
# ? Aug 15, 2013 10:32 |
|
For anyone who owns a DRZ and wants to make their own axle sliders, M10 threaded rod is (slightly) too big for the rear axle. You can do what I did and sand the thread down on about 10cm of the rod to let it protrude out the nut side of the rear axle. Just wear gloves while you're doing it so you don't sand the skin off the back of your hand.
|
# ? Aug 15, 2013 14:39 |
|
wallaka posted:It doesn't do a damned thing in the rain, though. Haha and enjoy your mud goggles if you ride any dirt. Even the offroad fender doesn't do much to stop that for some reason.
|
# ? Aug 15, 2013 17:40 |
|
Ephphatha posted:For anyone who owns a DRZ and wants to make their own axle sliders, M10 threaded rod is (slightly) too big for the rear axle. You can do what I did and sand the thread down on about 10cm of the rod to let it protrude out the nut side of the rear axle. Just wear gloves while you're doing it so you don't sand the skin off the back of your hand. Trying to envision how on earth you managed to sand the back of your hand, drawing a blank?
|
# ? Aug 16, 2013 09:14 |
|
Resting over the back of my hand cause I'm stupid.
|
# ? Aug 16, 2013 11:19 |
|
Covert Ops Wizard posted:Haha and enjoy your mud goggles if you ride any dirt. Even the offroad fender doesn't do much to stop that for some reason. Luckily I use the DRZ pretty exclusively on pavement. And if it's going to rain I can take the Marauder so I should be copacetic.
|
# ? Aug 17, 2013 01:21 |
|
Progress Report Wheelie Status: ACHIEVED I did my very first wheelie today. It was glorious and I'm a little embarrassed about the way it happened. I always figured my first would come with a big lead-up -- watching some wheelie technique videos on my phone, carefully reviewing the steps of wheelie-ing in my head, practicing the motions of a wheelie with the kickstand down. What happened instead is hot sauce and I were riding around an empty lot and a group of little kids came running over to watch. I felt bad since we were just about to head out, so as we rolled away I moved my foot over the rear brake, scooted back and cracked the throttle. Probably only came up a few inches in the front but it felt like 10 feet. I closed the throttle, wheel came down, and away we went. My secret fear since I got the bike was that there was something wrong with it. Everyone says the DRZ's a wheelie machine but even on fairly aggressive acceleration I'd never lifted the front. Turns out the problem was me. All it took was deciding to do it. I'm worried it's going to become a problem Well I'm sure that wasn't as interesting to anyone else as it was to me. But I feel like I just popped my cherry and I want to shout it from the rooftops.
|
# ? Aug 17, 2013 01:48 |
|
ought ten posted:Progress Report Yes. Yes it is. I know the feeling of thinking your bike can't do it though and then finding out it was you all along, my next step is doing wheelies at 30-40 mph and I don't even know how people manage to bring it up at that speed.
|
# ? Aug 17, 2013 01:56 |
|
Covert Ops Wizard posted:Yes. Yes it is. Yeah hard to imagine. I think first gear wheelies will keep me more than entertained for the time being.
|
# ? Aug 17, 2013 02:39 |
|
ought ten posted:Well I'm sure that wasn't as interesting to anyone else as it was to me. But I feel like I just popped my cherry and I want to shout it from the rooftops. Yeah you just gotta want it bad enough.
|
# ? Aug 17, 2013 06:42 |
|
ought ten posted:Progress Report Yeah I finally did a baby wheelie on the 690 the other night. Was riding home on a beautiful night after a 12hour shift, thought "Man, I'm a pansy!" and just wrung the poo poo out of the throttle. Of course I immediately freaked and eased off, but that one second of 4" felt great (want some of this, ladies?)
|
# ? Aug 17, 2013 15:47 |
|
Just wait until you accidentally 12oclock it.
|
# ? Aug 17, 2013 21:13 |
|
Covert Ops Wizard posted:Just wait until you accidentally 12oclock it. That was the result of my first accidental wheelie...I somehow saved it but took out my tail light and nearly poo poo myself. Sometimes I miss the CRF SM.
|
# ? Aug 18, 2013 00:10 |
|
My rear wheel is filthy- I suspect mostly from chain lube and other gunk. How the hell do I clean or keep clean my rear wheel? Between spokes, sprocket and the brake disk I'm not sure how to really get in there.
|
# ? Aug 18, 2013 08:13 |
Put kerosene on a rag and thank me later. It's magic for getting rid of chain lube.
|
|
# ? Aug 18, 2013 16:36 |
|
JP Money posted:Put kerosene on a rag and thank me later. It's magic for getting rid of chain lube. That worked pretty well. Thanks! I got my Vapor on, adjusted my valves (they were a little looser than spec), and changed my oil. Speaking of oil, I had about 1000 miles on the oil and had poo poo tons of metal flakes in the pan... It was like this when I last changed the oil after buying it from the PO, and I've read that this isn't "unusual", but it's kinda scary. So, there's a Dosoduro for sale in Houston and a '10 690 SMC in DFW. I might try to do a few track days and then look for a newer/less sketchy bike. For the time being I'm realizing that I need to go crazy with the loctite. What should I double check? MetaJew fucked around with this message at 06:12 on Aug 19, 2013 |
# ? Aug 19, 2013 06:09 |
|
You should clean your chain with kerosene and a toothbrush before applying lube. They sell a special brush for cleaning a chain but a toothbrush works. I definitely suggest using the teflon spray lube. No meee. A little pricey compared to just using oil but a lot less messy. Not sure if I read about it here or on another bike forum I think this is the one I used http://www.amazon.com/DuPont-Non-St...nDateDescending
|
# ? Aug 19, 2013 06:28 |
|
Put nearly 300 miles on the DRZ yesterday coupled with a couple hours of woods riding on street tires Not one picture, which is my bad. I'm paying for it today, but it was totally worth it to get out and blow the cobwebs out of it.
|
# ? Aug 19, 2013 19:20 |
|
Covert Ops Wizard posted:Just wait until you accidentally 12oclock it. Did this last time I was out (a week ago, screw work). First thing that popped in my head was those guys arguing about balance point wheelies like a month ago in this thread and I thought 'so that's what the balance point is, where you fall off the back of the bike' Christoff posted:You should clean your chain with kerosene and a toothbrush before applying lube. They sell a special brush for cleaning a chain but a toothbrush works. I keep my chain with a solid coat of hardened mud, is that bad?
|
# ? Aug 20, 2013 15:10 |
Finally tested out the Distanzias on a power line trail. Not too terrible, I never fully lost forward progress in some pretty deep mud, and didn't have to get off and push. Not nearly as good as real knobbies, but much better on the street. I am tired as hell, though. A mile off-road in this heat is rough for a chubby guy.
|
|
# ? Aug 21, 2013 00:29 |
|
I have those on my MZ - they're pretty good tires given how well they also perform on the street. The troubles you will run into come primarily from the 17" wide tire. Your frontend is pretty much going to always suck and have very little traction.
|
# ? Aug 22, 2013 21:20 |
|
Not sure what to think about this one.. http://orangecounty.craigslist.org/mcy/4017804352.html
|
# ? Aug 23, 2013 00:38 |
|
I dunno, it's as much a supermoto as the hypermotard is
|
# ? Aug 23, 2013 01:11 |
|
Covert Ops Wizard posted:Just wait until you accidentally 12oclock it. Almost looped the DRZ today, when I went for a "pissed off and need to relax ride" after work. Second gear wheelie got a little high and I decided to go for 12 o clock. Got there, panicked a bit and pressed down with my right foot, only to find that it slipped off the rear brake. Clutched in and held on to the bars while my rear end slid backwards and popped it down. I'm sure anyone on the sidewalk got a good laugh out of that one. I need to put my loving sliders on damnit. Edit: I guess it must have been 11:30 since I didn't go over backwards.
|
# ? Aug 23, 2013 02:45 |
|
Everything about that is terrible, but the forward controls kill me. What the gently caress would you do with it?
|
# ? Aug 23, 2013 02:47 |
|
Yerok posted:Almost looped the DRZ today, when I went for a "pissed off and need to relax ride" after work. Second gear wheelie got a little high and I decided to go for 12 o clock. Got there, panicked a bit and pressed down with my right foot, only to find that it slipped off the rear brake. Clutched in and held on to the bars while my rear end slid backwards and popped it down. I'm sure anyone on the sidewalk got a good laugh out of that one. I need to put my loving sliders on damnit. When panicking in a wheelie, don't clutch. The resistance from engine braking will bring you down from even farther than 12 o'clock.
|
# ? Aug 23, 2013 15:33 |
|
SaNChEzZ posted:Not sure what to think about this one.. Obviously that's a wrecked and abused Dyna. If it weren't, you could sell it and build two 883-based "supermotards".
|
# ? Aug 23, 2013 18:01 |
|
|
# ? May 24, 2024 18:49 |
|
ChewedFood posted:When panicking in a wheelie, don't clutch. The resistance from engine braking will bring you down from even farther than 12 o'clock. I can't believe I didn't think of that. Thank you! That'll definitely save my rear end in the future.
|
# ? Aug 24, 2013 00:08 |