|
Got my Anova today. Feels really solid. I did have to calibrate the temperature to the thermapen though. I read on eG that this production run was off a bit. Looks like a nice upgrade over the demi. Did a few eggs at 64C and they came out good. I think they cooked more evenly from the circulating.
|
# ? Sep 8, 2013 02:44 |
|
|
# ? Jun 5, 2024 04:44 |
|
Flash Gordon Ramsay posted:The magnum puts out far more pepper than any grinder I've tried. If you need a lot, that's you're go to. I'd you want something that looks and feels nice, get a Puegot. I totally glossed over the large quantities part of the question. My bad!
|
# ? Sep 8, 2013 08:09 |
|
unicorn magnum 6" is one of the best kitchen products I may ever have used, just in terms of "holy poo poo every other pepper grinder loving sucks" type realizations. to someone who was asking about pizza stones a while back, just get the largest loving rectangular ceramic stone you can find, it should run you $30-40. set it in your oven and forget about it. I keep mine on the floor of my oven and just bring it up to the top and give it a rinse and a brush with a metal wire brush before I use it. I'm pretty confident it helps heat distribution in my oven when not in direct use, and it works great for all sizes of bread and pizza when I need it for whatever. LARGER IS BETTER do not get anything round or small or anything like that, you will kick yourself a million times the first time you try to slide a pizza or bread or whatever on to or off of your stone and realize it goes flying all over the place where you didn't originally intend it to go. note : do not remove pizza stone from your oven, except when STONE cold (ahahahah see what I did there). do not clean while hot. I shattered my first stone by trying to rinse it while lukewarm. I'm dumb, I have made plenty of pottery in my time, I know it's incredibly sensitive to heat differentials, and I still hosed it up. edit : this fibrament thing doesn't look bad, and is only marginally more expensive than what I have - looks exactly the same only a bit thicker. mindphlux fucked around with this message at 08:34 on Sep 9, 2013 |
# ? Sep 9, 2013 08:30 |
|
I have to respond to the Sansaire questionnaire and decide if I want a blue or green display. Someone give me a reason for one over the other, so I can at least pin my regret for choosing the wrong color on someone else.
|
# ? Sep 9, 2013 15:10 |
|
Flash Gordon Ramsay posted:I have to respond to the Sansaire questionnaire and decide if I want a blue or green display. Someone give me a reason for one over the other, so I can at least pin my regret for choosing the wrong color on someone else. I chose green because it's SUPER EXCLUSIVE KICKSTARTER EDITION (that they'll probably offer at a later date).
|
# ? Sep 9, 2013 15:11 |
|
I think my problem is I prefer the blue, but am tempted to get the green because it's exclusive. So I should get the blue probably.
|
# ? Sep 9, 2013 15:16 |
|
The blue will probably be easier on the eyes late at night but otherwise does it really "matter"?
|
# ? Sep 9, 2013 15:24 |
|
Doh004 posted:The blue will probably be easier on the eyes late at night but otherwise does it really "matter"? Not at all. I chose blue. I will begin regretting it as soon as it arrives.
|
# ? Sep 9, 2013 15:25 |
|
You have chosen wisely. Also, gently caress you all very much for suggesting the Unicorn pepper mill. I have a standard wooden mill that is kind of a pain in the rear end to ensure consistent grind size, and I use a lot of pepper, but it's one of those "if it ain't broke" kitchen utensils. Now I just dropped $37 on a Unicorn. I think I need to stop reading this thread.
|
# ? Sep 9, 2013 15:25 |
|
The Midniter posted:
The only caveat I'd give on the unicorn is the refilling opening is a band that you turn, which can also get turned during the normal course of use, spilling peppercorns everywhere. I have no issues with not opening it accidentally, but I can't say the same for the rest of my family. Also the grind size is adjusted from the bottom which could be unsanitary. But you will forget about these things the first time you need to pepper crust something and are able to turn out enormous amounts of pepper with just a few twists.
|
# ? Sep 9, 2013 15:39 |
|
Flash Gordon Ramsay posted:The only caveat I'd give on the unicorn is the refilling opening is a band that you turn, which can also get turned during the normal course of use, spilling peppercorns everywhere. This always bugs me, too. How old is your pepper mill? Mine is several years old and has the cover that opens every time you grind pepper. I bought one as a gift a couple years ago and noticed the cover rotation direction had been reversed, which pretty much eliminates the issue. Not sure when they made the change.
|
# ? Sep 9, 2013 16:17 |
|
Bob_McBob posted:This always bugs me, too. How old is your pepper mill? Mine is several years old and has the cover that opens every time you grind pepper. I bought one as a gift a couple years ago and noticed the cover rotation direction had been reversed, which pretty much eliminates the issue. Not sure when they made the change. Oh thank god you confirmed this, I kept thinking people were absolute dumb if they were opening their unicorn while milling because they open the opposite direction of the grinder twist.
|
# ? Sep 9, 2013 16:24 |
|
yeah I was gonna say, who the heck is grinding counter-clockwise?? but I bought mine about 2 years ago so... who the heck designed the original cover flap thing?
|
# ? Sep 9, 2013 17:13 |
|
I will have to check which way my filling gate opens. But a lot of people seem to think you can grind by turning it either way. Those people are wrong, but knowing that they're wrong doesn't clean up the peppercorns skittering around the kitchen floor.
|
# ? Sep 9, 2013 17:29 |
|
various cheeses posted:For anyone interested: You can get a thermapen for $85 as opposed to the usual $96 at http://www.thermoworks.com/products/thermapen/ I don't mind brown at all. Is this about as good a deal as you can get? Do I really gain any sort of accuracy over the $20 option that takes slightly longer to get a reading? Porterhaus fucked around with this message at 20:02 on Sep 9, 2013 |
# ? Sep 9, 2013 19:19 |
|
Tenderloin posted:I don't mind brown at all. Is this about as good a deal as you can get? Do I really gain any sort of accuracy over the $20 option that takes slightly linger to get a reading? I think it was CdC that recommended a super fast Taylor as an alternative to the Thermapen. The only thing the Thermapen might give you over it is a bigger temperature range on a single package, but that might not be necessary. Also TP has a slightly tighter accuracy. deimos fucked around with this message at 19:45 on Sep 9, 2013 |
# ? Sep 9, 2013 19:42 |
|
I own a thermapen and nearly $100 is starting to get silly for a thermometer IMHO. Mine is a refurb I bought for $60 a few years ago and even then it felt a little overpriced. Getting a fast reading is nice, but I'd personally go for something cheap if I had to buy again.
|
# ? Sep 9, 2013 21:05 |
|
Another thing about the TP is that the pokey end is tiny, so it doesn't make as big of a hole in what you poke. Now I ain't saying that's worth 100 bucks, just putting it out there.
|
# ? Sep 9, 2013 21:26 |
|
My Thermapen was worth every goddamn penny. No regrets.
|
# ? Sep 9, 2013 21:59 |
|
The Midniter posted:My Thermapen was worth every goddamn penny. No regrets.
|
# ? Sep 9, 2013 22:56 |
|
If its for work, get a Taylor instant read. If its for home, wait for a refurb thermapen at $60.
|
# ? Sep 9, 2013 22:58 |
|
I've got the cheaper thermoworks model (RT600c) and I love it. The readout time is perfectly fine and it has the same thin tip and comparable accuracy to the Thermapen. Plus it's only $19 http://www.thermoworks.com/products/low_cost/rt600c.html
|
# ? Sep 10, 2013 00:35 |
|
Dacap posted:I've got the cheaper thermoworks model (RT600c) and I love it. The readout time is perfectly fine and it has the same thin tip and comparable accuracy to the Thermapen. Plus it's only $19 I also have this one. It's nice.
|
# ? Sep 10, 2013 01:24 |
|
my beloved splash resistant thermapen is so loving broke. I don't know what it is about equipment I use, but I use things hard. the poor thing is covered with heat welts from splatters of blazing hot oil, LCD doesn't fully read out properly because of ??? moisture I suspect? and there's a huge crack around the hinge that eventually worked its way all the way through the plastic, so if I push on the round hinge part even slightly, it easily kind of just opens up and splits in two. I have to remember to physically hold the thing together by pressing on the right side, or else gravity makes it sag apart and the LCD starts doing all sorts of crazy poo poo and flashing on and off. I should probably tape it together or something, but I'm slightly enamored with the whole situation at this point. despite all this, it still works like a champ, and I use it at least 4 or 5 times a week. bought about two years ago. <3
|
# ? Sep 10, 2013 06:30 |
|
mindphlux posted:I should probably tape it together or something
|
# ? Sep 10, 2013 11:55 |
|
Are the thermapens quite large compared to most pocket digital? I was at the Chicago NRA show and finally got a hands on but they seemed enormous like maybe the size of a cell phone. After I left I thought maybe they had those as display models to show the product but avoid theft. Or could just be how they are.
|
# ? Sep 10, 2013 14:19 |
|
billybill posted:Are the thermapens quite large compared to most pocket digital? I was at the Chicago NRA show and finally got a hands on but they seemed enormous like maybe the size of a cell phone. After I left I thought maybe they had those as display models to show the product but avoid theft. Or could just be how they are. The dimensions from the website are: 1.85 H x 6.1 W x 0.75 D inches (47 H x 153 W x 19 D mm) (Check out the website for their amusing rationale for the sale on brown Thermapens.) They aren't small. I just use my in my kitchen or by my BBQ or whatever, so size has never really been an issue (and it's nice to have a big display on it). It'll still fit in your pocket, though.
|
# ? Sep 10, 2013 15:37 |
|
Bob_McBob posted:This always bugs me, too. How old is your pepper mill? Mine is several years old and has the cover that opens every time you grind pepper. I bought one as a gift a couple years ago and noticed the cover rotation direction had been reversed, which pretty much eliminates the issue. Not sure when they made the change. Huh. I just got mine today from Amazon and the cover slides clockwise to expose the filling hole, same direction as you rotate the top to grind. I think I'm going to return it (because I am a size queen and it is smaller than I expected and I am going to get the 9" model)
|
# ? Sep 11, 2013 17:11 |
|
The Midniter posted:Huh. I just got mine today from Amazon and the cover slides clockwise to expose the filling hole, same direction as you rotate the top to grind. I think I'm going to return it
|
# ? Sep 11, 2013 18:25 |
|
No Wave posted:The 9" really does look nicer. More balanced-looking, plus you can really handle handle the shaft with your whole palm. My 9" rotates in the direction you want it to rotate, opposite from the grind direction - I got it four months ago or so off of Amazon. Same here, regarding the 9" and 4 monthish mark, not so sure I want to describe the palm action on my shaft.
|
# ? Sep 11, 2013 18:38 |
|
deimos posted:Same here, regarding the 9" and 4 monthish mark, not so sure I want to describe the palm action on my shaft. Haha. Well that was actually my concern - even if the slide to expose the fill opening went in the same direction as the grinding mechanism, if I could grasp the mill below the slide with my left hand while I turn the top with my right, it wouldn't be an issue. Unfortunately I have large hands so need the extra real estate on the bigger model.
|
# ? Sep 11, 2013 18:56 |
|
The Midniter posted:Huh. I just got mine today from Amazon and the cover slides clockwise to expose the filling hole, same direction as you rotate the top to grind. I think I'm going to return it The 9" model is sooooooo much better. It gives you enough shaft to grip on tightly with your palms, so that you don't expose its hole. And the heft of it in your hand is rather nice too. I think I need to go take a cold shower now.
|
# ? Sep 12, 2013 03:00 |
|
I'm a little late to the party here, but I have to vouch for the Peugot Madras. It has a magnetic disc on the top that opens into a big, open chamber. It's a shaftless pepper mill. It is by far the best one I have ever had - you adjust the mechanism with a simple rotation, and you've instantly changed the grind size. It turns smooth and clean no matter how big or small the grind, and two years on mine still functions flawlessly. As an aethetic junkie, it also is by far the sexiest mill that there is - since it's shaftless it doesn't need the typical top-knob and it's got a much more modern/contemporary set of curves to it. It's probably my favorite kitchen tool! But that's only because I don't have a Thermapen
|
# ? Sep 12, 2013 03:20 |
|
Guitarchitect posted:I'm a little late to the party here, but I have to vouch for the Peugot Madras. It has a magnetic disc on the top that opens into a big, open chamber. It's a shaftless pepper mill. I own one of those too! Its grinding action is extremely smooth. You can also get super finely ground pepper, or hella chunky. The issue with the unicorn magnum is that it's never going to give you pepper dust like the Peugot will.
|
# ? Sep 12, 2013 03:34 |
|
dino. posted:I own one of those too! Its grinding action is extremely smooth. You can also get super finely ground pepper, or hella chunky. The issue with the unicorn magnum is that it's never going to give you pepper dust like the Peugot will. I'm actually okay with that as I much prefer a coarse grind. I like chewing actual bits of peppercorn and the bite it adds to my dishes. In what situations would you want super fine pepper? Maybe to add to a seasoning blend before flouring something to fry, perhaps?
|
# ? Sep 12, 2013 15:13 |
|
The Midniter posted:I'm actually okay with that as I much prefer a coarse grind. I like chewing actual bits of peppercorn and the bite it adds to my dishes. In what situations would you want super fine pepper? Maybe to add to a seasoning blend before flouring something to fry, perhaps? Generally, it's for table use, when the pepper isn't going to be cooked. If it's cooked, I find that the larger chunks are no problem at all, but when it's fresh ground, people who aren't used to the bite of the stuff seem to like it very finely ground. And that said, there are very easy to recognise numbers along the bottom, should someone want a rougher grind at table.
|
# ? Sep 12, 2013 16:43 |
|
That Peugeot Madras is getting hammered in reviews on Amazon. Way too many 1-stars complaining about the thing breaking. And it looks so drat nice too.
|
# ? Sep 12, 2013 21:58 |
|
various cheeses posted:That Peugeot Madras is getting hammered in reviews on Amazon. Way too many 1-stars complaining about the thing breaking.
|
# ? Sep 12, 2013 22:10 |
|
It's funny that the current topics in this thread are the Thermapen and the Unicorn Magnum, as those are the two new toys I would like most right now. I have a $100 gift card to Williams Sonoma that I figured I could use to get one of those things but of course they don't carry either of those two products. They do carry what appears to be a Thermapen knockoff for $10 more than the original but it has terrible reviews and the Peugeot line of pepper mills which I may consider. I'll probably just end up getting an overpriced set of pasta bowls or something.
|
# ? Sep 12, 2013 23:01 |
|
|
# ? Jun 5, 2024 04:44 |
|
various cheeses posted:That Peugeot Madras is getting hammered in reviews on Amazon. Way too many 1-stars complaining about the thing breaking. I give it 6 stars! You trust goons, don't you? I use it every single day, and have for 2 years. Still no breaky. A lot of people seem to not know how to use it. Guess what - if you go from the coarsest grind to the finest without turning the mechanism, something is bound to go wrong. I talked to Peugeot about it before buying it, and they said "It is possible for the U'Select to feel "stuck" due to the peppercorn being caught in the grinder from time to time. Refer to our attached Quick Tip sheet for trouble shooting this issue. Perhaps this is what the reviews are referring to when indicating the mechanism is "seized". Upon receiving calls about this issue, we have a high percentage of correcting this issue over the phone. If necessary, our return procedure is implemented." I encountered the same thing when I was looking at Nutribullets. People whined up and down about them leaking all over the place. I did a test because i never saw the thing leak - I filled it past the "Max" line. Guess what... leakage! So, yeah, I mean based on my experience I'd say take the negative reviews with a grain of salt... but maybe I just got lucky? jason posted:I'll probably just end up getting an overpriced set of pasta bowls or something. Do you have an endgrain cutting board, and does Williams-Sonoma carry them? Because that'd be the top of my list... I have a little woodworking shop and made myself one (14x20, 1.5" thick) and it was the best addition to the kitchen I've made since getting the Madras. It's just so much better, in every way, for prepping food on. There's something so satisfying about the way it absorbs vibration+knifework Guitarchitect fucked around with this message at 01:57 on Sep 13, 2013 |
# ? Sep 13, 2013 01:54 |