Nidhg00670000 posted:I guess that makes my Cylinda (known as ASKO outside Sweden) with a 5 year standard warranty a little more than twice as good as the Bosch then? So m30 in e30? Or one of the smaller e28's or something? All my big m30 cars came with a mid-case.
|
|
# ? Oct 23, 2013 07:45 |
|
|
# ? May 9, 2024 23:43 |
|
Nidhg00670000 posted:I guess that makes my Cylinda (known as ASKO outside Sweden) with a 5 year standard warranty a little more than twice as good as the Bosch then? Wonder how long that took to annihilate that.
|
# ? Oct 23, 2013 16:24 |
|
Nidhg00670000 posted:I guess that makes my Cylinda (known as ASKO outside Sweden) with a 5 year standard warranty a little more than twice as good as the Bosch then? I bet that too must have made one hell of a noise. I wonder how the driver reacted.
|
# ? Oct 23, 2013 18:11 |
|
Found these two on imgur, more of operator error but there's mechanical carnage so I think they might fit into this thread
|
# ? Oct 23, 2013 18:21 |
|
2006 A4 2.0T -- HPFP Cam follower decides to let the engine eat it. Cam follower HPFP piston worn down & broken Intake camshaft groove worn into it from contact with the HPFP piston
|
# ? Oct 24, 2013 00:06 |
|
I know the driving experience of older Civic Hybrids can be pretty numb, but how the gently caress do you just drive on the rim that long? "It'll make it to the next service station... 20 miles ahead."
|
# ? Oct 24, 2013 02:21 |
|
Who goes through the effort of swapping a M30 into a 318i and doesn't change the diff to a medium case from a M20 E30?
|
# ? Oct 24, 2013 03:00 |
|
Horrible DIY failure leads to mechanical failure.
|
# ? Oct 24, 2013 03:09 |
|
How the hell do you install the timing belt backwards? Or did it flip over on its own? How the hell...
|
# ? Oct 24, 2013 03:12 |
|
Looks more like maybe they were used to ACVWs
randomidiot fucked around with this message at 04:04 on Oct 24, 2013 |
# ? Oct 24, 2013 03:16 |
|
rscott posted:Who goes through the effort of swapping a M30 into a 318i and doesn't change the diff to a medium case from a M20 E30? Someone who's cheap. M30s can be had for next to nothing and with some lengthened harness wires it is plug & play into an e30. But the M5x motors are objectively better in almost every aspect except longevity (M30s can take some serious loving abuse) so no one really swaps them anymore. FWIW, I once test drove an M10 turbo making about 235whp that still had the small case diff. Didn't sound too healthy when I drove it. People just do big power mods without considering other things.
|
# ? Oct 24, 2013 04:38 |
Crustashio posted:Someone who's cheap. M30s can be had for next to nothing and with some lengthened harness wires it is plug & play into an e30. But the M5x motors are objectively better in almost every aspect except longevity (M30s can take some serious loving abuse) so no one really swaps them anymore. Having seen someone do an m30 into an e30, it most assuredly isn't plug and play, at least not on the mechanical end of things. My argument for m30 vs m50/52 would be that they have an assload of torque and are really easy to turbocharge. But I'm biased I guess. It's a dumb thing to do because it trashes the handling on an e30, which was my main concern when I drove the end result. Oh and the m10/m30 bolt pattern and flywheels etc are the same which gives you a bunch of gearbox/clutch options. M20/50 is much more limiting. Slavvy fucked around with this message at 06:19 on Oct 24, 2013 |
|
# ? Oct 24, 2013 06:17 |
|
Crustashio posted:Someone who's cheap. M30s can be had for next to nothing and with some lengthened harness wires it is plug & play into an e30. But the M5x motors are objectively better in almost every aspect except longevity (M30s can take some serious loving abuse) so no one really swaps them anymore. Or someone who really wants a 4+ final drive ratio and an M30 with the minimum of effort? Always wondered what the M30 swaps actually drive like. Isn't the M30 both vast and heavy? Even if you get the suspension sorted (an expensive 'if'?) I would worry that they'd just plow straight on in every corner. I mean obviously you can drive around it, but is it really a pleasant experience? e: Looks like Slavvy has answered my question... Saga fucked around with this message at 06:24 on Oct 24, 2013 |
# ? Oct 24, 2013 06:22 |
Saga posted:Or someone who really wants a 4+ final drive ratio and an M30 with the minimum of effort? It really is pretty ratshit. From an all-round awesomeness perspective you really want either a turbo m10, an m42 or an m5x. The m30 has it's place though. Namely in a sharknose car with a turbo/blower on the side, a 4 speed rock crusher from an e12 behind it and an LSD medium case with 3.25 gears behind that. I miss having an old BMW
|
|
# ? Oct 24, 2013 19:44 |
|
Slavvy posted:So m30 in e30? Or one of the smaller e28's or something? All my big m30 cars came with a mid-case. E30 320 and down with open diffs use small case where as the LSD's are medium case diffs. 323 and up use the medium case on both open and LSD diffs. Or at least that is what I've been told. This was a M30 in a 318 IIRC.
|
# ? Oct 24, 2013 20:01 |
Nidhg00670000 posted:E30 320 and down with open diffs use small case where as the LSD's are medium case diffs. 323 and up use the medium case on both open and LSD diffs. Or at least that is what I've been told. This was a M30 in a 318 IIRC. I've never seen an LSD medium case in an e30, but I'm sure they exist. All the ones I've seen have been open. M30 in a 318 is a terrible idea, especially because it has suspension softer than a 6 cyl and the shittiest brakes available. The only upshot is plug-and-play gearbox, provided you build up an m10 clutch/flywheel combo that can deal with all the torques in the world.
|
|
# ? Oct 24, 2013 20:29 |
|
Slavvy posted:I've never seen an LSD medium case in an e30, but I'm sure they exist. All the ones I've seen have been open. M30 in a 318 is a terrible idea, especially because it has suspension softer than a 6 cyl and the shittiest brakes available. The only upshot is plug-and-play gearbox, provided you build up an m10 clutch/flywheel combo that can deal with all the torques in the world. Every E30 325es/is should have a medium case LSD no? They do in North America anyways.
|
# ? Oct 24, 2013 21:01 |
|
rscott posted:Every E30 325es/is should have a medium case LSD no? They do in North America anyways. Correct. Medium case LSDs are relatively common in the US.
|
# ? Oct 24, 2013 21:06 |
rscott posted:Every E30 325es/is should have a medium case LSD no? They do in North America anyways. We never got is/es, all the 325i I've seen are either ordinary or 'm-sport' and have the associated bodykit, seats, steering wheel etc. 323's are pretty rare here so I can't comment on that. We have an e30 race series where they're allowed to run either a 320i or an m40 318i and they must get their lsd's somewhere. It's a hilarious class, they can go hog-wild on suspension and chassis but the engine and gearbox have to be totally factory.
|
|
# ? Oct 24, 2013 21:09 |
|
e: forgot what thread I was in, nvm
SuperDucky fucked around with this message at 15:57 on Oct 25, 2013 |
# ? Oct 25, 2013 15:51 |
|
My sister's '96 Corolla recently had an A/C belt shred itself off the pulleys, I took a look at it and saw that the alternator belt wasn't far behind. Since the timing belt hadn't been touched since '06 / 70k miles I figured I'd go in there and refresh everything all at once, and I'm glad I did.. Crank pulley, shot from the passenger wheel well. Looks like something from the wreckage of the Titanic, but it's pretty standard for something that has lived in Ohio for 16 winters. (you don't wanna know about the rear wheel wells) Hey, the pulley comes off the crank pretty easily! Wait a tick, I haven't taken the crank bolt off yet... I've never heard of a crank pulley failing this way... at least on the VW's I've worked on. You can see evidence of the pulley "hunting" back and forth; shiny scuff on the engine block and burnt plastic on the timing belt cover. More than likely it's the cause of the belts shredding off, I'm just glad I caught this in October rather than February.
|
# ? Oct 28, 2013 05:55 |
|
NoWake posted:
It's not the most common thing, but it does happen. There's a bit of rubber between the two pieces (which is why it's also referred to as a harmonic balancer on a lot of cars); when it rots away, they split apart like that. And yeah, that's likely why it's tossing belts.
|
# ? Oct 28, 2013 07:58 |
|
NoWake posted:I've never heard of a crank pulley failing this way... at least on the VW's I've worked on. You can see evidence of the pulley "hunting" back and forth; shiny scuff on the engine block and burnt plastic on the timing belt cover. More than likely it's the cause of the belts shredding off, I'm just glad I caught this in October rather than February.
|
# ? Oct 28, 2013 08:51 |
|
Florida is a dump but at least I don't have to worry about getting maintenance done before the great freeze.
|
# ? Oct 28, 2013 11:56 |
|
I'm not going to quote the images again, but I've seen that failure on a twenty year old Integra. The power steering never missed a beat; I only discovered that it was broken because the a/c would make it slip.
|
# ? Oct 28, 2013 13:43 |
|
NoWake posted:My sister's '96 Corolla recently had an A/C belt shred itself off the pulleys, I took a look at it and saw that the alternator belt wasn't far behind. Since the timing belt hadn't been touched since '06 / 70k miles I figured I'd go in there and refresh everything all at once, and I'm glad I did.. I had this happen to my crank pulley, it went the other way and chewed up the timing belt.
|
# ? Oct 28, 2013 15:07 |
|
ultimateforce posted:Florida is a dump but at least I don't have to worry about getting maintenance done before the great freeze. It's kind of the opposite in Florida. I get as much poo poo done in the fall, winter and early spring as I can before the great heat shows up and I don't go outside.
|
# ? Oct 28, 2013 17:38 |
|
Blackdawgg posted:It's kind of the opposite in Florida. I get as much poo poo done in the fall, winter and early spring as I can before the great heat shows up and I don't go outside. Garage + fans solves that though, mostly
|
# ? Oct 28, 2013 18:02 |
|
ultimateforce posted:Florida is a dump but at least I don't have to worry about getting maintenance done before the great freeze. My Holley rebuild kit will be arriving tomorrow, when the weather hits low 40s as the high. Today it was 65 by 10 am.
|
# ? Oct 28, 2013 18:07 |
|
CarForumPoster posted:Garage + fans solves that though, mostly Bitch you've never worked in Arizona
|
# ? Oct 28, 2013 18:22 |
|
I've got two engines to pull and a cylinder head to remove to get my cars back on the road. It's been in the upper 20s every morning this week . Why does it seem like the only time I manage to work on my poo poo is when it's cold, dark, raining, or all of the above.
|
# ? Oct 28, 2013 18:22 |
|
Geirskogul posted:Bitch you've never worked in Arizona Or Florida. Garages here are generally unbearable to work in, even with ventilation.
|
# ? Oct 28, 2013 20:57 |
|
ultimateforce posted:Florida is a dump but at least I don't have to worry about getting maintenance done before the great freeze. This was me last night: I plugged it in in a combination of panic over a dim oil pressure warning light and pragmatism in wanting the 2" thick sheet of frozen rain to melt off the underside of the car so I could find the front subframe jacking point. Don't ask about the q-tips.
|
# ? Oct 28, 2013 21:07 |
|
NoWake posted:My sister's '96 Corolla recently had an A/C belt shred itself off the pulleys, I took a look at it and saw that the alternator belt wasn't far behind. Since the timing belt hadn't been touched since '06 / 70k miles I figured I'd go in there and refresh everything all at once, and I'm glad I did.. My Grandma's 1996 Corolla that looks exactly like that had never had the timing belt changed until march of this year when I finally managed to badger her enough to get her to let me do it. Belt must have been at least a little stretched because it runs much less shittily now. Never seen one stay in service long enough to get fuzzy like this before: Accessory belts looked like poo poo too: These were all original to the car being new. She's the sort that gets pissed off she has to do maintenance.
|
# ? Oct 28, 2013 21:21 |
|
Pfff, you can still see the lettering in those belts. They're good for another decade at least . My grandmas '99 Corolla still has the OEM belts and plugs too, but it also only has 75k on it. Still been nagging her to do the timing belt before dry-rot gets it.
|
# ? Oct 28, 2013 21:25 |
|
Those don't look that bad, honestly e:fb or whatever ^^^^^
|
# ? Oct 28, 2013 21:29 |
|
MrYenko posted:Or Florida. Garages here are generally unbearable to work in, even with ventilation. The service centre for one of the dealerships here has a big section of their wall which can be opened and pivots vertically on a central axle / hinge. It's always open for most of the year. I suppose it would be the difference between brain boiling and a horrible workplace which can still sustain human life.
|
# ? Oct 28, 2013 21:35 |
|
Seat Safety Switch posted:This was me last night: Why is your car covered in cocaine?
|
# ? Oct 28, 2013 22:49 |
|
Looks like he's got a bad case of freezer burn going on.
|
# ? Oct 28, 2013 23:27 |
|
|
# ? May 9, 2024 23:43 |
|
Vanagoon posted:My Grandma's 1996 Corolla that looks exactly like that had never had the timing belt changed until march of this year when I finally managed to badger her enough to get her to let me do it. Belt must have been at least a little stretched because it runs much less shittily now. Those belts look....okay.
|
# ? Oct 28, 2013 23:54 |