|
mr_bunnyfish posted:Hello, I own a 2002 CVPI that's recently developed noticeable belt whine, like more than before. I pulled off the belt and checked all the pulleys and they all spin fine, but after I put the belt back on I noticed that the tensioner seems to jitter a lot. Could this be the source of the noise? It's definitely a steady whine that gets louder and quieter with the RPMs, and it doesn't seem to make a difference if I'm turning or not so I don't think it's the power steering, and the water pump pulley turns just fine as well as everything else. The only other thing I could think of is that maybe the alternator is on its way out but nothing else seems to indicate that. If you're seeing the tensioner being jittery it's time for a new tensioner. Looks like this, right?: https://www.youtube.com/watch?v=0MfTe4K7q4w
|
# ? Oct 16, 2013 14:31 |
|
|
# ? May 13, 2024 07:37 |
|
Jared592 posted:If you're seeing the tensioner being jittery it's time for a new tensioner.
|
# ? Oct 17, 2013 23:04 |
|
The Midniter posted:Uhaul people are comically inept and that entire company should burn to the ground. I have had nothing but bad experiences with them. It is really really fun to work there tho. Well was, before they installed crazy monitored cameras everywhere. Ever sat on a car hauler being towed behind a box truck that's doing snow donuts while on the clock? Its fun.
|
# ? Oct 18, 2013 00:16 |
|
Second ever autocross! I was hoping to maybe knock off a few tenths off my previous best time and get in the 50 second range; somehow I took off more than 3.27 seconds and I still have quite a few mistakes to iron out, this car has a lot more to give than anyone expects https://www.youtube.com/watch?v=hKqHq4MuIhk
|
# ? Oct 18, 2013 02:02 |
|
Goober Peas posted:Cab to the airport this morning was a franken-panther. Front end of the Vic, back end of the Marquis. Dash was police spec Vic, with 496k miles. Drivers seat was older style with the rounded headrest, passengers seat was newer style with square headrest. 496k...that's awesome. Exactly the reason why I bought the newest/lowest mile Vic I could find: they run FOREVER. With only 27k on the clock I got a loooong time to go with this hunk of BOF RWD beast
|
# ? Oct 18, 2013 12:34 |
|
Anyone know where to start looking if I was trying to get a cheap Panther near Seattle? They're supposed to be easy to find here but craigslist is dry as a bone. I need a cheap running auto car by monday and a vic or something seems like a great candidate because it shouldn't be too difficult or expensive to fix up.
|
# ? Oct 19, 2013 00:58 |
|
Buy 13" Inch Dick's he's selling his
|
# ? Oct 19, 2013 01:06 |
|
I should note it's for a friend who only has $1000
|
# ? Oct 19, 2013 01:39 |
|
$1k gets you an aero I've seen, I'll take a look when I get home. $1700 for mine, special goon discount andit's literally ready to drive anywhere in the country. It's basically what I have into it and I don't really think for a car that needs as little as this one does I should really go a whole lot less. Talk to your friend, but I know how it is when cash is a problem (like for me, right now hah)
|
# ? Oct 19, 2013 01:46 |
|
13 INCH DICK posted:$1k gets you an aero I've seen, I'll take a look when I get home. $1700 for mine, special goon discount andit's literally ready to drive anywhere in the country. It's basically what I have into it and I don't really think for a car that needs as little as this one does I should really go a whole lot less. Talk to your friend, but I know how it is when cash is a problem (like for me, right now hah) He has some antiques that he's going yo try and pawn to raise the budget a little. Or maybe I can talk him into taking the bus till payday if that's even possible (yay skc transit)
|
# ? Oct 19, 2013 02:42 |
|
13 Inch Dicks car would be worth while in buying. Hes gone through it, and should be reliable for some time. Buying one for 1000 bucks could put your friend in more pain and spending way over 1700 total.
|
# ? Oct 19, 2013 15:10 |
|
Found this on CL thinking about checking it out. i have a 2006 Crown Vic has 140,000 miles on it. A/C works power windows and locks, tinted windows, car runs great but transmission only has reverse. forward gears just quit without warning, could be a simple solenoid. asking $1000 OBO or trades text me with what you have, Kyle Anyone have an idea what the deal with the tranny might be?
|
# ? Oct 25, 2013 19:45 |
|
Could be anything, but at worst you could probably have a rebuilt trans put in it for under $1500 so it would still be a good deal if the car is in good shape overall.
|
# ? Oct 26, 2013 03:28 |
|
It looks like the cable goes to the radio, not the antenna. Dis here is the mount, note it has the other end of that cable plugged in: Also the check engine light is still hosed, won't light at all. It is showing no codes at all, everything tests clear. It is weird.
|
# ? Oct 29, 2013 17:29 |
|
Pumpkin_Paine posted:It looks like the cable goes to the radio, not the antenna. Dis here is the mount, note it has the other end of that cable plugged in: That's just a lovely glass mount antenna base. Throw it out. You can remove it from the glass with a razor blade.
|
# ? Oct 29, 2013 17:34 |
|
Motronic posted:That's just a lovely glass mount antenna base. Throw it out. You can remove it from the glass with a razor blade. At present since I am not in the market for a scanner or whatever I am leaving it be, it is currently waterproof and whatever plug I would end up sticking in would take doing something to not be. Maybe next summer I will pull out the cop light and patch the hole in the door it leaves and take care of that antenna mount at the same time.
|
# ? Oct 29, 2013 18:31 |
|
Pumpkin_Paine posted:At present since I am not in the market for a scanner or whatever I am leaving it be, it is currently waterproof and whatever plug I would end up sticking in would take doing something to not be. Maybe next summer I will pull out the cop light and patch the hole in the door it leaves and take care of that antenna mount at the same time. There's no hole with a glass mount antenna, it's all inductive yo.
|
# ? Oct 29, 2013 18:52 |
|
KozmoNaut posted:There's no hole with a glass mount antenna, it's all inductive yo. Exactly. Which is also why they are so lovely as doing their job.
|
# ? Oct 29, 2013 20:44 |
|
It's been 40 degrees outside when I have been leaving for work so I decided its time to fix the blend door actuator and get my heat back. I would have been done in under an hour if I didn't drop the socket into the heater core box. So that ment I had to loosen the rest of the dash to get my hand in there and fish it out. So about 2 hours total to get it done.
|
# ? Nov 5, 2013 21:59 |
|
Holdbrooks posted:It's been 40 degrees outside when I have been leaving for work so I decided its time to fix the blend door actuator and get my heat back. I would have been done in under an hour if I didn't drop the socket into the heater core box. So that ment I had to loosen the rest of the dash to get my hand in there and fish it out. So about 2 hours total to get it done. Couldn't get in there with a magnet on a stick?
|
# ? Nov 5, 2013 22:36 |
|
https://www.youtube.com/watch?v=LVTe8PKHl6Y I continue to believe I made the right choice by going with glasspacks. Also, interesting quirk my car has developed. Because of how wobbly my power steering pulley is getting, it feels almost like the pump itself is cavitating and grinding occasionally when i'm driving. I really need to replace that when I get some extra money this month, because it's getting fairly sketchy.
|
# ? Nov 10, 2013 05:46 |
|
Sad day, my 2000 $1200 p71 bit the dust. Was having the wonderful timing chain rattle that the 99-01s get and put off the $900 repair just a hair too long. Was driving home with the noise as loud as ever when the engine died and I coasted to a stop. Had a feeling the chain slipped and figured since it happened at speed everything was trashed anyways I bumped the starter. It gets about half a crank then just stops, rocking the motor a bit. Got a solid 6 months out of her and should be able to get $500 or so off of craigs so I cant complain too much. Now only if I could get my hands on a newer p71 with an lsd this time.
|
# ? Dec 3, 2013 03:16 |
|
Check to see how much scrap goes for in your area. You might be close to $500 with the weight of these cars, and you wouldn't have to dick around with craigslisters.
|
# ? Dec 3, 2013 15:42 |
|
I suppose it is better than playing dumb in the listing and acting like I have no mechanical skills or knowledge and am selling a car because of something little. All the money without the guilt and shame afterwards. EDIT: Local scrap would be $200. Going to try craigs for $500 obo. ExtremeODD fucked around with this message at 01:35 on Dec 4, 2013 |
# ? Dec 3, 2013 19:33 |
|
Don't be too jealous of my fly ride.
|
# ? Dec 5, 2013 19:48 |
|
Nice Sentra SE-R!
|
# ? Dec 5, 2013 20:57 |
|
I want a Shelby Crown Vic. That bodykit, the new Coyote engine, etc. I think it'd look decent in black. It'd stop me from getting pulled over for looking like a fake cop, at least. In yellow it reminds me of this terrible movie. I think that might be the point of it. Boomerjinks, do you know that guy? I want to see more of the blue and red one behind it.
|
# ? Dec 6, 2013 14:37 |
|
That guy is me, haha. I found a dealership in South Carolina that had nothing but cars with huge rims and that was one of them. https://www.facebook.com/photo.php?v=10202880225513478
|
# ? Dec 6, 2013 15:59 |
|
ExtremeODD posted:Sad day, my 2000 $1200 p71 bit the dust. Was having the wonderful timing chain rattle that the 99-01s get and put off the $900 repair just a hair too long. Was driving home with the noise as loud as ever when the engine died and I coasted to a stop. Had a feeling the chain slipped and figured since it happened at speed everything was trashed anyways I bumped the starter. It gets about half a crank then just stops, rocking the motor a bit. Got a solid 6 months out of her and should be able to get $500 or so off of craigs so I cant complain too much. Now only if I could get my hands on a newer p71 with an lsd this time. I just got one without lsd and UGGGHHH I'm on the fence about swapping it.
|
# ? Dec 6, 2013 16:29 |
|
Has anyone put a coyote or ecoboost v6 in a panther? That would be way cool.
|
# ? Dec 7, 2013 02:18 |
|
SouthLAnd posted:Has anyone put a coyote or ecoboost v6 in a panther? That would be way cool. How hard are the supercharged Cobra motors to swap in from the 2004 or so Mustangs?
|
# ? Dec 8, 2013 15:30 |
|
What about the 32v V8? I imagine if would fit.....
|
# ? Dec 8, 2013 16:30 |
|
Coredump posted:How hard are the supercharged Cobra motors to swap in from the 2004 or so Mustangs? Not hard at all, the Marauder already has the NA Cobra motor in it.
|
# ? Dec 8, 2013 16:48 |
|
SouthLAnd posted:Has anyone put a coyote or ecoboost v6 in a panther? That would be way cool. No Panther should EVER have anything less than 8 cylinders.
|
# ? Dec 9, 2013 00:52 |
|
11BulletCatcher posted:No Panther should EVER have anything less than 8 cylinders. How about the 6.7 Power Stroke? 400hp and 800 lb-ft of torque. Honestly, panthers are so cool, all engine swaps become cool by default.
|
# ? Dec 9, 2013 04:01 |
|
SouthLAnd posted:Honestly, panthers are so cool, all engine swaps become cool by default. Cadillac V8-6-4.
|
# ? Dec 9, 2013 05:42 |
|
How about swapping in that inline 6 DOHC I seem to recall australian fords getting? All proper 6 cylinder engines have them in a line not a vee
|
# ? Dec 9, 2013 05:53 |
|
kastein posted:All proper 6 cylinder engines have them in a line not a vee Dem's fightin' words. Unless you have an exception in there for an air cooled flat 6.
|
# ? Dec 9, 2013 05:58 |
|
leica posted:Not hard at all, the Marauder already has the NA Cobra motor in it. Than this should be the default answer. A v8 with all that off the line torque of a positive displacement blower in a boat like the Crown Vic? Sends shivers up my spine I tell you.
|
# ? Dec 9, 2013 14:32 |
|
|
# ? May 13, 2024 07:37 |
|
Coredump posted:Than this should be the default answer. A v8 with all that off the line torque of a positive displacement blower in a boat like the Crown Vic? Sends shivers up my spine I tell you. https://www.youtube.com/watch?v=oqhczIGh_aY
|
# ? Dec 9, 2013 17:44 |