|
Got my baofeng and could only listen to the local weather channel. The local VE listed doesn't have a test until May. Guess I'll just have to drive an hour just to take the darn test sooner than May.
|
# ? Mar 4, 2014 15:24 |
|
|
# ? May 13, 2024 09:19 |
|
PuTTY riot posted:passed tech and general holy poo poo fuckin congrats! you're really going to appreciate getting that general if you pick up an HF radio, you get a chunk of every band to goof with. proud of ya boy
|
# ? Mar 4, 2014 15:39 |
|
thanks jony ur the only reason i even considered taking more than one test. and ya def want to get some hf action going but i want to understand antennas way better first. sounds like the club i tested at has a decent budget and nobody said anything about obama sounds like they just have trouble getting all the members to come. i think thye have a field day or something in a few weeks and will have some radios set up so i guess i will join they club and play w/ they radios hopefulyl they have some cool hf poo poo set up. v eclectic bunch. silver haired chem prof, volunteer (?) firefighter guy, gen x arduino prof of unknown subject, afrotc guy etc etc. my wife laughed at me when i told her there were no women there.
|
# ? Mar 4, 2014 15:58 |
|
PuTTY riot posted:thanks jony ur the only reason i even considered taking more than one test. and ya def want to get some hf action going but i want to understand antennas way better first. sounds like the club i tested at has a decent budget and nobody said anything about obama sounds like they just have trouble getting all the members to come. i think thye have a field day or something in a few weeks and will have some radios set up so i guess i will join they club and play w/ they radios hopefulyl they have some cool hf poo poo set up. Nice, that sounds like a pretty decent environment! it certainly wouldn't hurt to go to a couple meetings and get to know them a little bit. Definitely go to Field Day - the official one is the last weekend in June iirc. I'll do a big post on it today maybe but it's the biggest radio event of the year, everybody comes out of the woodwork and you get a shitload of experience not just operating radios, but setting up and running emergency operations stations
|
# ? Mar 4, 2014 16:34 |
|
im not having the best of luck w/ sdr# but im thinking its prob this poo poo antenna
|
# ? Mar 4, 2014 22:27 |
|
installing cygwin. what have i done
|
# ? Mar 4, 2014 22:48 |
|
PuTTY riot posted:im not having the best of luck w/ sdr# but im thinking its prob this poo poo antenna
|
# ? Mar 4, 2014 22:51 |
|
code:
|
# ? Mar 4, 2014 23:12 |
|
ok yeah i cranked the gain and that is a little better. these antennas are terrible lol tune in a powerhouse FM - it's cool, sdrsharp can decode the RDS jello are you trying to gently caress around with TRBO over there or something
|
# ? Mar 5, 2014 00:28 |
|
yeah you need to crank the gain way up on those fuckers or the snr is poo poo
|
# ? Mar 5, 2014 00:33 |
|
Jonny 290 posted:ok yeah i cranked the gain and that is a little better. these antennas are terrible lol ya im fuckin w/ TRBO
|
# ? Mar 5, 2014 01:26 |
|
so i emailed that craigslist guy about the scope and asked if he had a probe so i could test the thing out, first he replies with a picture of his probe, along withquote:I could make a video for you if it would be easier? I really don't know how to use it, but I know how to turn it on and make everything glow and light up. doesn't know how to use it even though it comes with a manual and a book on oscilloscopes i reply that that's all right, i can test it myself quote:Unfortunately, I do not live in a place by myself - room mates do not welcome 'random' visitors, so I'll have to pass. Sorry. I understand that you'd like to use it - I would too if I was buying. can't tell if the guy's a scammer or just a chump
|
# ? Mar 5, 2014 03:35 |
|
meet him @ walmart parking lot find a plug on a light pole or smth
|
# ? Mar 5, 2014 03:39 |
|
or don't cause gently caress ppl who flake out on CL
|
# ? Mar 5, 2014 03:39 |
|
yeah idfk. i would sever right now but this thing is sick oh cool i was going to link the post and it's been deleted now. aaaaaargh
|
# ? Mar 5, 2014 04:07 |
|
sdr adventures: i plugged in the stick and did the little sdrsharp batch installer, it got all the weirdo drivers and poo poo. sadly though I wasn't picking up much cause I didn't have a good surface for the antenna, or much height. And the laptop is running pretty hot, it's an old POS so it's gotta hump it a bit. Anyways I said "hmm this is all linuxy, i wonder if there's a server" and sure enough I found a raspberry pi guide to make an rtlsdr server. I just followed the same steps and jammed the fucker into my Debian VM host. detected first time. started the server, holy poo poo holy poo poo i have a remote radio! g wifi doesnt really play well with the 2.4 MS/sec sampling rate, but 1MS seems to be okay. I plugged in a cable to the laptop and it'll do 2.4 MS all day long through that. Response time and latency is good, and I was able to put the antenna on top of my server case which is at the very top of a closet. Still indoors, but I'm picking up so much more now. I'd really like to see the limitations of the USB distance via really good quality cable or CAT6 and get this fucker up on the roof somehow
|
# ? Mar 5, 2014 04:19 |
|
so this is like 3 hours away, idk if i wanna spend anything yet tho, im not sure what i want to do yet
|
# ? Mar 5, 2014 04:34 |
|
Woop! The 751A is a solid solid radio with excellent performance and one loving ginormous caveat. i have the 271a, the 2 meter all mode version, and it suffers from the same problem basically in the early 80s, Icom designers were idiot shitlords and put some of the code that runs the radio not in ROM, not in an EPROM, but in motherfuckin' battery backed RAM. Obviously now that they're tickling 20-30 years old a lot of the backup batteries poo poo out, and when that happens, the little memory board zaps out and your rig goes braindead. Pretty much the two ways around this are to make sure teh battery is new/good (you can swap the battery but it's soldered so you have to temporarily solder another battery to a couple +/- pads on the board, desolder the original battery, put in the new one and detach your temp battery) OR to get an upgraded memory board from a company called Piexx (still in business) that reverse engineered it and improved the design. Latter solution is maybe a hundo? But your 751 will last forever after that. So there's your big bargaining chip with that rig if you choose to go hunt em down. i really should go work for icom at this point
|
# ? Mar 5, 2014 04:51 |
|
jonny 290 is like human radio wikipedia
|
# ? Mar 5, 2014 05:10 |
|
haha i was jumping up and down 1mhz at a time just keeping an eye out for any obvious FM signals and i found something its a wideband fm transmission of ESPN's audio. i think i just picked up my neighbor's wireless speakers
|
# ? Mar 5, 2014 05:39 |
|
Jonny 290 posted:haha i was jumping up and down 1mhz at a time just keeping an eye out for any obvious FM signals and i found something yeah u prob did, im picking up the babby monitor
|
# ? Mar 5, 2014 05:46 |
|
i just heard the dog bark thru my computer lol
|
# ? Mar 5, 2014 05:47 |
|
ahaha the remote uplink for the FM station down the street is 948.500, it comes in better than their 104.9 signal xd this is a hoot
|
# ? Mar 5, 2014 05:48 |
|
are u just manually scanning up and down or have u played w/ any of the scanner plugins yet?
|
# ? Mar 5, 2014 05:50 |
|
yeah if you hop up and down 1mhz at a time (click your mouse on the mhz digit at the top of sdrsharp and then arrow up/down) you will learn to recognize narrow and wide FM signals. spurious carriers and birdies are single or grouped vertical lines FM voice has constant level and varying width. compare the weather station/a local 2 meter repeater's signal with an FM broadcast signal data signals have constant level and width, they often show up on the waterfall as a pair of close vertical lines make sure you're opening the filters up if you're trying to send that data to another program. set your levels right but you probably dont want the low pass filtering if its just going to a program
|
# ? Mar 5, 2014 05:58 |
|
ok yeah duh filter audio was checked. that should do it. now if only a cop would say smth so i could see
|
# ? Mar 5, 2014 06:13 |
|
idk some fart sounds and SYNC:-DMR BS DATA flying across cmd window. based on their freqs on radio ref i dont think theyre trunking maybe theyre actually just sending data back n forth and not saying anything ugh the suspense is killing me. i dont think its encrypted-- how would i tell tho?
|
# ? Mar 5, 2014 06:16 |
|
you'll see a carrier come up and it look like a transmission, but no audio i just hooked up an old program called PDW to sdrsharp and may or may not be decoding pagers* *technically illegal
|
# ? Mar 5, 2014 06:25 |
|
im uploading a vid right now but if thats the case they may be encrypted...
|
# ? Mar 5, 2014 06:27 |
|
https://www.youtube.com/watch?v=m6JX8wIU79Q
|
# ? Mar 5, 2014 06:32 |
|
hmm. i havent messed with PC decoding of digital stuff yet. lemme goof with DSD for a night and see what i can figure out
|
# ? Mar 5, 2014 07:23 |
|
Jonny 290 posted:
lol why
|
# ? Mar 5, 2014 07:39 |
|
welcome to the cheapo conputer radio club btw guys
|
# ? Mar 5, 2014 08:11 |
|
this all sdr stuff seems way easier than hooking up my T90A to my computer. what's the best dongle for radio performance edit: or do selectivity and sensitivity and poo poo even apply when it's SDR edit: can i decode p25 with an SDR
|
# ? Mar 5, 2014 10:23 |
|
the purpose-built bladerf/hackrf/funcube dongle/etc SDRs seem pretty coolquote:The bladeRF x115 comes with a larger 115KLE Cyclone IV FPGA that provides additional room for hardware accelerators and signal processing chains including FFTs, Turbo Decoders, transmit modulators/filters, and receive acquisition correlators for burst modems. I don't know what that most of that means or how I'd use it, but it sounds cyberpunk as poo poo
|
# ? Mar 5, 2014 10:34 |
|
that sounds cool as hell but can you get it on ebay for under $20? b/c i'd just get an RT2832 dongle and u can do p25 with a program called DSD
|
# ? Mar 5, 2014 13:08 |
|
atomicthumbs posted:this all sdr stuff seems way easier than hooking up my T90A to my computer. what's the best dongle for radio performance poo poo that matters: bandwidth and operating range. rule 36 answer: anything ettus makes
|
# ? Mar 5, 2014 15:56 |
|
atomicthumbs posted:
you can try!!!!
|
# ? Mar 5, 2014 16:09 |
|
i dont mean to brag but i may be getting a hackrf on indefinite loan and am tremendously excited Barring CPU and bandwidth issues (my two annoyances so far) i'm pretty hooked
|
# ? Mar 5, 2014 16:14 |
|
|
# ? May 13, 2024 09:19 |
|
Jonny 290 posted:i dont mean to brag but i may be getting a hackrf on indefinite loan and am tremendously excited so im lookin @ that thing and wonderin why its got a USB and not a PoE NIC instead. idk. seems pretty cool tho
|
# ? Mar 5, 2014 16:36 |