|
teraflame posted:Yeah I was set on buying it until I tried it at a store. The step on the grip to body is sharp and the taper is too narrow for me to hold comfortably. You did the right thing.
|
# ? Apr 10, 2014 23:56 |
|
|
# ? May 25, 2024 13:51 |
|
I don't understand how you can write holding the pen like halfway up the barrel instead of on the grip.
|
# ? Apr 11, 2014 03:04 |
|
pienipple posted:I don't understand how you can write holding the pen like halfway up the barrel instead of on the grip. Big Hands, for some. Gripping higher can also be a method for reducing downward force. In my highschool tech drawing class we were taught to hold the drafting pencil very high up when drawing ruled lines that would eventually be erased; this produced very light marks that were easy to erase after use. Welsper fucked around with this message at 04:38 on Apr 11, 2014 |
# ? Apr 11, 2014 04:36 |
|
I bought one of these two weeks ago http://www.ebay.com/itm/Jinhao165-Wine-And-Gold-Mesh-Scales-Medium-Nib-Fountain-Pen-New-/261253870239 That's seriously the fastest time I've ever gotten ANY Chinese thing over the internet. It writes really smooth and I like it. But seriously, two weeks total in transit. I was expecting it to be like 2 months.
|
# ? Apr 11, 2014 04:41 |
|
For me, the value of the metro is that I can bring it out of the house on the occasions that I am worried about losing a pen or getting mugged or something.
|
# ? Apr 11, 2014 15:19 |
|
My choice for those uses is the Pelikan Future, which is no where near as smooth/nice as the metro, but fits my hand perfectly. Even though I don't like it for myself the Metro is a beautiful pen for the price.
|
# ? Apr 11, 2014 17:14 |
|
Picked up a rose gold and carbon invincia at a swap meet for 5. Just needs a good cleaning. I was eyeing one of these at msrp last week so score.
|
# ? Apr 12, 2014 21:50 |
|
Be careful with the Vac700 I sound up looking like I murdered a smurf when the top came undone when I was opening up the feed.
|
# ? Apr 13, 2014 19:50 |
|
I need something with a rather wide nib in a short notice for a class so, sadly, having something shipped from Goulet is out of the question. My only choice right now, from what I can get locally, seems to be a Rotring Art Pen with a 2.3mm italic nib. Any input on these? Also, I currently have a Rotring fountain pen fitted with an international converter; it should work on the Art Pen, right?
|
# ? Apr 13, 2014 20:20 |
|
Sheaffer Viewpoints can be had in 1.1, 1.5, and 1.8 mm italic sizes from Staples and Michaels'. They're ok, I use a 1.8 one at work a lot. $5-7, comes with two cartridges. Cheap stop-gap if you want to order something nicer in the meantime. If you wanted to use it with bottled ink the cheapest I've seen the converters is $8 from isellpens.com. Take the rubber grippy off before filling or ink gets under it and stains your fingers.
|
# ? Apr 13, 2014 21:18 |
|
pienipple posted:Sheaffer Viewpoints can be had in 1.1, 1.5, and 1.8 mm italic sizes from Staples and Michaels'. They're ok, I use a 1.8 one at work a lot. $5-7, comes with two cartridges. Cheap stop-gap if you want to order something nicer in the meantime. Sorry, I should have clarified. I need at least a 2mm nib, I have two Lamy pens (CP1 and Safari) I can get a 1.9mm italic nib for over here (Argentina, so no big stores, and the Staples here doesn't carry Shaffer, I just chcked), which I really doubt my teachers will be able to tell from a 2mm, but I wanted to go a bit broader. I would get a Pilot Parallel Pen 2.4, but they're impossible to get. If the converter I already have works for the Art Pen (and they don't suck), it would be perfect.
|
# ? Apr 13, 2014 21:25 |
|
Ah, in that case I can't help, no experience with Rotrings.
|
# ? Apr 13, 2014 21:30 |
|
Rotring Art Pen should be just fine I think. Right now they're owned by Rubbermaid/Sanford which are solid stationery brands and I believe the Art-Pen was designed before they were bought. I think a standard converter should fit. I had one many years ago and it was pretty sweet. Edit: *were Hellbeard fucked around with this message at 22:36 on Apr 13, 2014 |
# ? Apr 13, 2014 22:31 |
|
pienipple posted:I don't understand how you can write holding the pen like halfway up the barrel instead of on the grip. I swap off when my fingers start to hurt from gripping the very end of the pen, the further down I go the harder I tend to grip. This is one of the gripes I have with some of the Lamy pens, they're pretty rad collectable FP's. The grip itself however is really thin, and man does it hurt my hand. Kiran fucked around with this message at 07:36 on Apr 14, 2014 |
# ? Apr 14, 2014 07:34 |
|
I got my Vanishing Point today with a F nib. Is the writing angle supposed to be really narrow? I get skipping on up and down strokes the way I normally want to hold it.
|
# ? Apr 15, 2014 02:58 |
|
Is it possible to put a TWSBI Diamond 580 italic nib into the new TWSBI black and gold DIamond 580? As in can you remove the nib from the feed to replace it so you can keep the black section?
|
# ? Apr 15, 2014 07:13 |
|
Xun posted:Would you guys recommend using a syringe with a converter? I'm tired of getting ink all over the place when I refill my pen but I think I've only seen syringes being used with cartridges. I sometimes refill cartridges with a syringe because it lets me go longer between refills. A converter sacrifices ink capacity for the filling mechanism. A converter is less messy, but as others have pointed out, rubber gloves are a good way to keep your fingers clean. Either that or use an ink that washes off your hands easily.
|
# ? Apr 15, 2014 10:38 |
|
Stick Insect posted:I sometimes refill cartridges with a syringe because it lets me go longer between refills. A converter sacrifices ink capacity for the filling mechanism. A converter is less messy, but as others have pointed out, rubber gloves are a good way to keep your fingers clean. Either that or use an ink that washes off your hands easily. I just stick with the syringe situation. It's very neat, and lets me get a perfect fill every time. If a pen comes with a converter, I'll leave it on, in case of emergencies when I can't find my syringe.
|
# ? Apr 15, 2014 12:03 |
|
Hellbeard posted:Rotring Art Pen should be just fine I think. Right now they're owned by Rubbermaid/Sanford which are solid stationery brands and I believe the Art-Pen was designed before they were bought. I think a standard converter should fit. I had one many years ago and it was pretty sweet. I got the Art Pen, the international converter worked like a charm. I am running into a bit of an issue though. I filled it up with Diamine Syrah, and I'm having trouble when starting strokes. Once it gets going it works fine, but the first stroke in a letter tends to not start when I set the pen down. Anything I should try regarding the feed? Maybe try to clean the nib? Or will it just settle on its own after a bit of writing? It is the first fill after all. Cheers
|
# ? Apr 15, 2014 18:10 |
|
I found Syrah to write well but be a finicky starter in a standard nib pen. Flush it out with water and a drop of dish soap, rinse with clean water, and try inking it again. If it's still finicky starting try a less saturated ink.
|
# ? Apr 15, 2014 18:16 |
|
pienipple posted:Sheaffer Viewpoints can be had in 1.1, 1.5, and 1.8 mm italic sizes from Staples and Michaels'. They're ok, I use a 1.8 one at work a lot. $5-7, comes with two cartridges. Cheap stop-gap if you want to order something nicer in the meantime. These are particularly nice if you are willing to grind down the nib into more of a stub. I used the four grade nail file/buffer that most pharmacies sell. The thing I like but hate at the same time is the cartridge window - nice to see your remaining ink but the deep recess of it is uncomfortable on the hand. Question regarding the Noodler's freebie pen - the rollerball attachment is way down in the barrel. It is stuck down there; I can't get it out even with tweezers and ink has collected behind it...any ideas on how I can remove it?
|
# ? Apr 15, 2014 18:34 |
|
teraflame posted:I got my Vanishing Point today with a F nib. Is the writing angle supposed to be really narrow? I get skipping on up and down strokes the way I normally want to hold it. You'll have to define "way I normally hold it". I've found the best grip that works for my VP is rotated slightly anticlockwise, with the indented section of the clip going slightly under my thumb.
|
# ? Apr 15, 2014 18:49 |
|
Converting the Kaweco ice sport into an eyedropper was a bad move. Turned the pen into a leaky mess, not from the threads but from the feed. Maybe a rollerball feed is different but it wasn't as awesome as I had hoped. Looked very nice with the clear body and ink though, sigh.
|
# ? Apr 16, 2014 13:50 |
|
pienipple posted:I found Syrah to write well but be a finicky starter in a standard nib pen. I cleaned it and refilled it with Heart of Darkness. I could have sworn I remembered it being blacker than it is. Maybe I had a bit of leftover water in the feed or maybe it looks lighter when using it with a wide nib, it looks darker on the preppy I have it in. Will keep testing out stuff and reporting back, if anyone's interested. I still have 2 or 3 different inks to go through.
|
# ? Apr 16, 2014 13:56 |
|
I'm having a slight problem with my pen. I'm using a Pilot Metro with Noodler's Borealis Black. There's always a small ring of ink where the grip flares out to meet the feed. I always end up with ink all over my fingers, which is getting a little annoying. It looks like there's a small seam between the grip and the piece of plastic that holds the feed/nib. Other goons here have complained about Borealis Black being really leaky, but it's never really bothered me otherwise. Has anyone had a similar problem? Should I try a different ink? Or could it be a problem with the pen?Edmond Dantes posted:I cleaned it and refilled it with Heart of Darkness. I could have sworn I remembered it being blacker than it is. Maybe I had a bit of leftover water in the feed or maybe it looks lighter when using it with a wide nib, it looks darker on the preppy I have it in. I've always found HoD to be somewhat gray, if not brown A lot of people say it's super dark, but to me it looks a bit lighter than Aurora Black/Borealis Black or Noodler's Black.
|
# ? Apr 16, 2014 15:11 |
|
I bought a Pilot Custom Heritage 92. I love everything about it except the line is just too broad. If you are interested in this pen, the medium is more like a broad tip. Try the FM or F!
|
# ? Apr 16, 2014 18:32 |
|
Solumin posted:I'm having a slight problem with my pen. I'm using a Pilot Metro with Noodler's Borealis Black. There's always a small ring of ink where the grip flares out to meet the feed. I always end up with ink all over my fingers, which is getting a little annoying. It looks like there's a small seam between the grip and the piece of plastic that holds the feed/nib. Other goons here have complained about Borealis Black being really leaky, but it's never really bothered me otherwise. Has anyone had a similar problem? Should I try a different ink? Or could it be a problem with the pen? Are you using cartridges, or eyedrop fill? The metro is not designed to be eyedrop filled.
|
# ? Apr 17, 2014 01:36 |
|
Verdugo posted:Are you using cartridges, or eyedrop fill? The metro is not designed to be eyedrop filled. I'm using a cartridge, which I just refill when the ink runs low. Edit: I just finished cleaning it out (and covered my hands in ink in the process, yay) and there was a lot of ink in the cap. I'm not sure if the ink on pen came from the cap or vice versa. Solumin fucked around with this message at 21:50 on Apr 17, 2014 |
# ? Apr 17, 2014 15:27 |
|
Today I was looking through some of my grandpa's crap and I stumbled across an old fountain pen. I think it's a shaeffer snorkel admiral. The Leona N Fay isn't flush with the side like the rest of the lettering. I'm thinking it might be the name of the former owner. What would I have to do to get this thing in working order? Is doing so a good idea? I'm a little afraid to just start running liquids through it, I have no idea how old it is or what condition the internals are in. I don't know what I'm doing please send help.
|
# ? Apr 26, 2014 00:55 |
|
Hats Wouldnt Fly posted:Today I was looking through some of my grandpa's crap and I stumbled across an old fountain pen. I think it's a shaeffer snorkel admiral. Goongratulations . Try filling it with water and using it as a squirt gun (unscrew the blind cap at the back of the pen to extend snorkel, pull blind cap/filling mechanism, submerge snorkel, push blind cap/filling mechanism back in and wait for a few seconds). If it doesn't squirt out a good jet of water, the seals for the filling mechanisms have probably fallen apart. With the snorkel extended, you can also unscrew the barrel from the section like with a cartridge pen to see if it has taken on water (there should be none visible outside the ink sac), which could cause it to rust - some Snorkels have become rusty or crusted with crud by taking on ink through a bad seal. While you're at it, also make sure to take out the big metal...spring...thing (you'll know it when you see it/shake it out of the pen barrel). The spring can jam the pen when filling if improperly replaced (or rarely during normal use) so familiarise yourself with where it sits and make sure to reassemble the pen with the filling mechanism extended all the way. If the seals have gone bad, you can basically unscrew all of the pen and replace them with a snorkel repair kit and some silicone grease from ebay (or send it to someone to repair, which is overkill for a snorkel seal replacement unless you are completely incompetent with tools). One seal sits on the snorkel tube in the section, which unscrews by hand into two parts (the front part being the nib and the untextured plastic collar right above it, the back part being the textured grip area and the metal threads for the cap, and you can just pull the snorkel tube and ink sac out for replacing the seal), and the other seal is in the blind cap which is held on the filling mechanism with a normal slotted screw from the inside (use a long screwdriver, as you'll have to go all the way into the pen barrel). In other news, I've pulled the trigger on a Pilot 823 with an FA nib I was tempted to get the shop's Pilot 845 special edition (vermilion/red, also with FA nib) instead, but luckily that was sold out. suck my woke dick fucked around with this message at 21:28 on Apr 26, 2014 |
# ? Apr 26, 2014 21:19 |
|
Need some advice on how to remove stubborn ink from a nib. Got a super old pen and the ink was hard as a rock. I finally got the nib and feed apart, soaked and cleaned the feed, but the nib has this black crust of ink on the inside that just won't come off. I'm afraid to use something really abrasive on it because it's a two tone gold looking nib. Any advice?Solumin posted:I'm using a cartridge, which I just refill when the ink runs low. I would disassemble the pen completely, rinse out the nib and feed really well, rinse out the cap and dry, rinse out the body and let it dry, then try with a fresh fill of ink and see what happens. There can be a disturbing amount of ink in the nooks and crannies of a pen, I usually completely rinse mine out whenever I'm changing inks or every other fill. Verdugo fucked around with this message at 21:38 on Apr 26, 2014 |
# ? Apr 26, 2014 21:36 |
|
Verdugo posted:Need some advice on how to remove stubborn ink from a nib. Got a super old pen and the ink was hard as a rock. I finally got the nib and feed apart, soaked and cleaned the feed, but the nib has this black crust of ink on the inside that just won't come off. I'm afraid to use something really abrasive on it because it's a two tone gold looking nib. Any advice? Household ammonia.
|
# ? Apr 26, 2014 21:37 |
|
Verdugo posted:Need some advice on how to remove stubborn ink from a nib. Got a super old pen and the ink was hard as a rock. I finally got the nib and feed apart, soaked and cleaned the feed, but the nib has this black crust of ink on the inside that just won't come off. I'm afraid to use something really abrasive on it because it's a two tone gold looking nib. Any advice? Ultrasonic cleaner, use water with a dash of ammonia for solution.
|
# ? Apr 27, 2014 03:32 |
|
blowfish posted:Goongratulations . Thanks for the advice. It squirts a good stream of water. I can unscrew the nib, but not the barrel section. It is incredibly sturdy, and even with the help of some old rubber mat for grip it won't come unscrewed. There's a little bit of moisture on the metal surface that pulls out. Is there a trick to unscrewing the barrel? Edit: If I flick the pen water flies out of the withdrawn snorkel. Is this normal, or a symptom of a bad seal? Hats Wouldnt Fly fucked around with this message at 05:21 on Apr 27, 2014 |
# ? Apr 27, 2014 05:17 |
|
http://www.amazon.com/Zebra-H-301-Stainless-Highlighter-Refill/dp/B004CLMP8S If you're a huge pen nerd like me, get these highlighters, refill cartridges with Noodler's highlighter ink, cackle. Use a syringe to skip the step of 'get highlighter ink EVERYWHERE'.
|
# ? Apr 27, 2014 05:32 |
|
Hats Wouldnt Fly posted:Thanks for the advice. It squirts a good stream of water. I can unscrew the nib, but not the barrel section. It is incredibly sturdy, and even with the help of some old rubber mat for grip it won't come unscrewed. There's a little bit of moisture on the metal surface that pulls out. Is there a trick to unscrewing the barrel? If you need to flick it several times or with some force, a few drops come out normally. It might just be a little hard to open because it's old, no need to force it if it won't come apart at all if the pen is working anyway. Alternatively, some idiot might have shellaced it together after a previous repair job (you'll need a heat gun, or you can submerge it in warm water, but snorkel plastics tend to get ruined only slightly above the melting temperature for shellac...). Note that the joint between the barrel and the section is the threads for the cap (the threads themselves are on the section, the non-threaded metal is on the barrel). By the way, have an illustrated guide for a complete snorkel/PFM disassembly: http://www.richardspens.com/ref/repair/snorkel_filler.htm
|
# ? Apr 27, 2014 08:55 |
|
And make sure you keep track of every part you remove. Don't do what I did and lose one of the most crucial and hard-to-get parts of the pen, making it useless.
|
# ? Apr 27, 2014 16:40 |
|
tsc posted:http://www.amazon.com/Zebra-H-301-Stainless-Highlighter-Refill/dp/B004CLMP8S I use the Preppy line of highlighters since I can also buy tip refills. The tips are always smooshed after a few months so it's nice to be able to change in a new one. Preppys can also be converted into an eyedropper so it's great if you do a lot of highlighting
|
# ? Apr 27, 2014 20:22 |
|
Any recommendations for a fountain pen friendly journal/diary that won't break the bank?
|
# ? Apr 30, 2014 12:35 |
|
|
# ? May 25, 2024 13:51 |
|
Finally sprung for a TWSBI 580 and a Goulet pen tuning/cleaning kit, and they threw in a mini Tootsie Pop and a handwritten note on the invoice in Diamine Eau de Nil (which was really pretty). Also picked up a bottle of Noodler's 54th Massachusetts, which I loaded the TWSBI with and absolutely love. Hngh. Dis pen. laertes22 posted:Any recommendations for a fountain pen friendly journal/diary that won't break the bank? Depending on how much you're willing to spend, the Midori Traveler's Notebooks are really nice, and although the leather cover is $50-60, it comes with a refill (which are about :5bux: each afterwards). If you don't care about refills/reusability (which I personally like), Clairefontaine's clothbound notebooks are really nice. venus de lmao fucked around with this message at 17:58 on Apr 30, 2014 |
# ? Apr 30, 2014 17:52 |