|
wormil posted:You guys are thinking small. Set up an overhead jackshaft system and run everything off it. This is the only answer.
|
# ? May 14, 2014 05:45 |
|
|
# ? Jun 8, 2024 06:05 |
|
Only if you set up a boiler and a steam powered generator, though.
|
# ? May 14, 2014 12:31 |
|
One Legged Ninja posted:Only if you set up a boiler and a steam powered generator, though. Then he'll be a European Jay Leno.
|
# ? May 14, 2014 13:36 |
|
I was thinking more like Jeremy Clarkson, poooooower! In other news I checked out some Makita cordless screw drivers, I don't like cordless tools but I've only had lovely ones, these ones felt quite nice in the hand. Also got some pictures of that saw I am interested in: Doesn't look like it weighs 600lbs
|
# ? May 14, 2014 18:43 |
Is that what the seller claims? That it weighs 600 pounds? There is no way on god's green earth that saw weighs 600 pounds, unless everything in that shop is scaled and the saw is actually 10 feet tall.
|
|
# ? May 14, 2014 18:52 |
|
One Legged Ninja posted:Only if you set up a boiler and a steam powered generator, though. Or find a local stream with 6ft of head and make a micro hydro power station.
|
# ? May 14, 2014 18:54 |
|
Yeah itäs a company I am dealing with called Woodford, from the UK, they sell a range of saws, well thought of generally, though lovely about this whole internet thing.
|
# ? May 14, 2014 18:55 |
|
Maybe they mean the table is rated for 600 pounds of material or something (for all the situations where you need to saw up something weighing 600 pounds)
|
# ? May 14, 2014 20:55 |
|
Sagebrush posted:Maybe they mean the table is rated for 600 pounds of material or something (for all the situations where you need to saw up something weighing 600 pounds) Nah it says Net weight 275kg or ~600lbs on the specs they emailed me. I'm really wondering about that since their cabinet saw model (which they got online, but not this cheaper model) is 268kg: http://www.woodfordtooling.com/accessories/saw-blades/saw-hw110lge-30.html (IIRC this should be a delta unisaw clone) It's just if they got things like that wrong (maybe they meant 275lbs or ), it makes me wonder about the engine too, I really liked it had a 3HP engine like a full sized cabinet saw, all contractor style saws I've seen have a 1.5HP engine.
|
# ? May 15, 2014 04:37 |
|
Got some clarification from Woodford now, saw is indeed 130kg, a matter of looking at the wrong column. Engine is 3HP though and it's dado capable (possibly the only one made for the eu market). A strong engine is definite pro when doing dado cutting.
|
# ? May 15, 2014 11:53 |
|
What is the preferred method/tool for making long straight or angled cuts on sheet materials? I'm going to be doing a sheet siding soon and really am not good at make straight cuts with my circular saw, even with a fence. ninja edit: I'm probably going to have to pick up a new circular saw as well, since my Ryobi battery powered one kills even my brand new batteries fairly quickly.
|
# ? May 15, 2014 14:25 |
|
Dragyn posted:What is the preferred method/tool for making long straight or angled cuts on sheet materials? A panel saw is probably the best thing, but they're expensive and not very portable. Maybe look into a track saw? Dewalt and Fein I believe both make them.
|
# ? May 15, 2014 15:07 |
|
Dragyn posted:What is the preferred method/tool for making long straight or angled cuts on sheet materials? Unless you're going to be spending thousands on a specialty tool, the circular saw is going to have to do the job. Lay the sheet flat on a sacrificial surface, and set the blade to just barely thick enough to cut the sheet. Obviously you need to clamp a straight edge to the sheeting to run your circular saw along. If anyone knows of a better method that doesn't involve buying a 2 ton delta cabinet saw I'd love to hear it.
|
# ? May 15, 2014 15:52 |
|
Blistex posted:Unless you're going to be spending thousands on a specialty tool, the circular saw is going to have to do the job. Lay the sheet flat on a sacrificial surface, and set the blade to just barely thick enough to cut the sheet. Obviously you need to clamp a straight edge to the sheeting to run your circular saw along. If anyone knows of a better method that doesn't involve buying a 2 ton delta cabinet saw I'd love to hear it. A simple edge guide works pretty well, or you can roll your own with a long sheet of hardboard and plywood with clamps. Otherwise, tracksaw/EZ-GUIDE plus a square. The tracksaw route makes this really, really easy. Get two sawhorses and some 2x to make a bench, put foamboard insulation on top, place sheet on foamboard. Cut. Done.
|
# ? May 15, 2014 17:42 |
|
Tim Thomas posted:A simple edge guide works pretty well, or you can roll your own with a long sheet of hardboard and plywood with clamps. Otherwise, tracksaw/EZ-GUIDE plus a square. A tracksaw seems like the easiest route, I wonder if I could find someone to loan me one for a while, $500 is steep for how much I really need it. Thanks!
|
# ? May 15, 2014 18:13 |
|
Dragyn posted:A tracksaw seems like the easiest route, I wonder if I could find someone to loan me one for a while, $500 is steep for how much I really need it. Thanks! You can easily make a homemade version from plywood. There are dozens of youtube videos showing how. Jay bates has a good video.
|
# ? May 15, 2014 18:34 |
|
wormil posted:You can easily make a homemade version from plywood. There are dozens of youtube videos showing how. Jay bates has a good video. Second Jay's video. I ended up buying a Makita due to a great deal, otherwise I was planning on just making a guide. Would have saved me about $250...
|
# ? May 15, 2014 22:00 |
|
wormil posted:You can easily make a homemade version from plywood. There are dozens of youtube videos showing how. Jay bates has a good video. I'll have to check that out. I made myself a little 8'x4' frame out of 2x4s for cutting sheet goods on, and it definitely helps, but I'm still pretty lovely at it. I wouldn't trust myself to cut a bunch of paneling for like cabinets or something like that.
|
# ? May 15, 2014 22:04 |
|
Dragyn posted:A tracksaw seems like the easiest route, I wonder if I could find someone to loan me one for a while, $500 is steep for how much I really need it. Thanks! Most circular saws have track slots in the sole. I've got the second cheapest Bosch circular saw and a cheapo Ferm track, works a charm and it cost me just over 100 euro. Just be sure to test if your saw fits the track nicely, and stay the gently caress away from plastic tracks. Spend the bit extra for a proper aluminium track.
|
# ? May 15, 2014 22:04 |
|
His Divine Shadow posted:If I don't have a welder is there something else I can that doesn't involve a kite and some keys? I feel like this could be a chance to acquire some cheap cordless tools, or try and revive my current one (some poo poo cotech or something). I successfully revived four makita batteries using this method. http://m.youtube.com/watch?v=1e8hHLyXAyQ
|
# ? May 16, 2014 01:40 |
|
Well crap, took out the screwdriver and looked at the battery and it's a NiMH battery, not a NiCAD. Edit: I am now considering turning this into a corded screwdriver by replacing the battery with an AC adapter. Not sure what amperage I should go for though, the battery is 16.8v, not sure if an 18V current would be too much for it, doesn't seem like such a small variation should make that huge a difference. It's a piece of poo poo screw driver anyway. His Divine Shadow fucked around with this message at 05:26 on May 16, 2014 |
# ? May 16, 2014 04:43 |
|
wormil posted:You can easily make a homemade version from plywood. There are dozens of youtube videos showing how. Jay bates has a good video. Thanks for mentioning this guy. I'm always looking for cool woodworking youtube channels. Do you guys like any others? I follow Frank Howarth and Mattias Wendel of course.
|
# ? May 16, 2014 05:25 |
|
His Divine Shadow posted:Well crap, took out the screwdriver and looked at the battery and it's a NiMH battery, not a NiCAD. You'll need a pretty sizable supply to handle the current demands of a screwdriver, especially if it stalls out. That's the joy of batteries, very high current supply for inrush current.
|
# ? May 16, 2014 08:29 |
Tigren posted:Thanks for mentioning this guy. I'm always looking for cool woodworking youtube channels. Do you guys like any others? I follow Frank Howarth and Mattias Wendel of course. The wood whisperer is pretty good and has a nice end grain chopping board video. Wood working for mere mortals is ok, and Carl Jacobson has some neat turning videos.
|
|
# ? May 16, 2014 10:00 |
|
Tigren posted:Thanks for mentioning this guy. I'm always looking for cool woodworking youtube channels. Do you guys like any others? I follow Frank Howarth and Mattias Wendel of course. Alain Vaillancourt/The Woodpecker does some stuff similar to Matthias. For hand tool woodworking Paul Sellers and Shannon Rogers/Renaissance Woodworker.
|
# ? May 16, 2014 17:17 |
|
Tigren posted:Thanks for mentioning this guy. I'm always looking for cool woodworking youtube channels. Do you guys like any others? I follow Frank Howarth and Mattias Wendel of course. Jay Bates John Heisz Alex Harris (ThisWoodwork/TheTeenWoodworker) Woodworking for Mere Mortals/Steve Ramsey Jack Houweling Frank Howarth Matthias Wandel Izzy Swan I can think of a few others but those are the ones I really enjoy.
|
# ? May 16, 2014 18:58 |
|
Tigren posted:Thanks for mentioning this guy. I'm always looking for cool woodworking youtube channels. Do you guys like any others? I follow Frank Howarth and Mattias Wendel of course. Rather than listing them all I just grabbed a screenshot. There are actually more woodworkers I subscribe too but haven't updated the list in awhile. The Drunken Woodworker is a good way to find new woodworking channels, he does a weekly wrap up video and usually features several videos that are very good. Woodworkers Turners. Jake Gevorgian is a standout on this list, not a 'how-to' channel but he is a highly skilled professional, artist, and enjoyable to watch, might even be interesting to non-turners. He does occasionally stray from turning. Robbiethewoodturner is highly skilled and always trying new things, his videos are a bit long. Here is another list I call Makers because some aren't strictly woodworkers or because they tend toward machines. There is some overlap with other lists. Ronald Walters is a tinkerer/woodworker and is often featured by Matthias. JimmyDiresta is awesome and works in wood and metal, he appears on Make and his own channel. Wooden Tool Man comes off like a chamois cloth salesman but he's actually pretty clever if you can get past his long winded shouting style of talking.
|
# ? May 16, 2014 20:57 |
|
Since I didn't see it on there yet... Switch & Lever is a great channel I just found - mostly metal rather than woodworking but some great ideas, well-narrated and interesting.
|
# ? May 16, 2014 23:22 |
|
wormil posted:Rather than listing them all I just grabbed a screenshot. There are actually more woodworkers I subscribe too but haven't updated the list in awhile. The Drunken Woodworker is a good way to find new woodworking channels, he does a weekly wrap up video and usually features several videos that are very good. Wow, this is fantastic. I love watching Howarth's turning videos so I'll definitely check out the Turners list. Thanks a lot.
|
# ? May 17, 2014 01:15 |
|
That list is very wood centric (which isn't a problem) - for metalworking, look no farther than Turn Wright Machine Works (Keith Fenner.) Speaking of which, I need to catch up on his videos sometime.
|
# ? May 21, 2014 18:47 |
|
kastein posted:That list is very wood centric (which isn't a problem) - for metalworking, look no farther than Turn Wright Machine Works (Keith Fenner.) That's not going to be easy, he talks a LOT. His shop isn't far from my wife's grandparent's house, I keep meaning to drop by and say hello. For welding, check out welding tips and tricks with Jody. He's really really easy to understand, and has a lot of arc shots.
|
# ? May 21, 2014 20:34 |
|
Yeah, welding tips and tricks is awesome too. And I keep meaning to head down to Keith's place sometime as well. I have some custom work that he could probably do a great job of and he seems like a cool dude. A bit longer drive for me, but still worth it.
|
# ? May 21, 2014 20:55 |
|
kastein posted:That list is very wood centric (which isn't a problem) - for metalworking, look no farther than Turn Wright Machine Works (Keith Fenner.) You can't talk youtube metalworking instructionals without MrPete222 (tubalcain) https://www.youtube.com/user/mrpete222/videos
|
# ? May 22, 2014 13:55 |
|
ReelBigLizard posted:You can't talk youtube metalworking instructionals without MrPete222 (tubalcain) Yup, he's awesome, in an adorable "kids, get off my lawn" way.
|
# ? May 22, 2014 20:24 |
|
Is he the crazy old guy that really really hates drill bit sharpening jigs?
|
# ? May 22, 2014 21:40 |
|
Yes, but in his defense, most of those are pretty terrible.
|
# ? May 23, 2014 05:31 |
|
Just picked up a second-hand Ryobi 10" compound miter saw from a craigslist ad. This one: http://www.homedepot.com/p/Ryobi-14-Amp-10-in-Compound-Miter-Saw-TS1344L/100634340#product_description For $60, it's in pretty much brand new condition with all it's accessories intact. Score! Now i can return my dad's to him, since I've had it in my garage for 5 years now. (sorry, just wanted to brag)
|
# ? May 23, 2014 15:51 |
|
Hey, is this a reasonable price for this bandsaw? http://jacksonville.craigslist.org/tls/4480165016.html I'm thinking it's the Delta 28-276. Mostly, I'm looking to be able to cut some curves and make bandsaw boxes, and I think that will fit the bill.
|
# ? May 23, 2014 16:45 |
|
Finally wired the 220V for my Grizzly Polar Bear table saw and I have to say I love that thing! The fence is crazy smooth, only took me a minute to adjust it to be perfectly square, and I love that they included the big safety shield/riving knife/kickback clamps, but also another riving knife if you want to so notch cuts as well. The saw runs smooth, and the included blade is pretty good as well. The only downside is that the cord is a little short, so you have to think where you want it in your shop before setting everything up. The manual says to avoid using extension cords as they drop voltage, so no 20' cords for convenient placement. It's a real steal for the price, but I'm still kicking myself that I didn't pull the trigger when it was going for $790 on Amazon instead of the $1280 that I bought it for.
|
# ? May 24, 2014 03:18 |
|
|
# ? Jun 8, 2024 06:05 |
|
Dragyn posted:Just picked up a second-hand Ryobi 10" compound miter saw from a craigslist ad. I've had that exact same saw for a few years now. The laser guide gave out after a few months but otherwise it's worked wonderfully for all my home projects.
|
# ? May 24, 2014 17:51 |