|
I use a respirator anytime I am sanding, but not usually when just making cuts on the table or band saw. I should more often though. I work with my garage door open and have a fan that blows from the back outside. I'm torn on how much this helps vs kicking up more dust, but with the summer heat I kind of need it on regardless. =/ I also just use a shop vac, but I really think I need something more geared for dust collection. The shop vac works fine for cleanup, but doesn't seem as great for hooking to tools. Any suggestions there? The cheaper the better. I've debated trying to make something like matthias, but it might be a bit over my head.
|
# ? Sep 10, 2014 16:38 |
|
|
# ? May 16, 2024 18:35 |
|
Finished the mahogany dresser I'd been working on for a client:
|
# ? Sep 11, 2014 02:28 |
|
Wow. That thing looks amazing.
|
# ? Sep 11, 2014 02:41 |
|
Tim Thomas posted:
Both of these are fantastic!
|
# ? Sep 11, 2014 02:54 |
|
Stavrogin posted:Finished the mahogany dresser I'd been working on for a client: Stellar! Is that a dye or stain?
|
# ? Sep 11, 2014 03:58 |
|
Honestly I'd never get anything done if I had to use a respirator every time I wanted to make a cut or use a power tool. My plan is to invest in better dust collection systems for my powered stuff instead. I probably should sand stuff outside though.
|
# ? Sep 11, 2014 06:10 |
|
I look like I'm fighting ebola whenever I use all the tools since I don't have dust collection beyond a broom.
|
# ? Sep 11, 2014 15:37 |
|
I just use a fan and my shirt pulled over my nose when sanding.
|
# ? Sep 11, 2014 21:04 |
|
Sylink posted:I look like I'm fighting ebola whenever I use all the tools since I don't have dust collection beyond a broom. I just have a shop-vac for whichever tools have a dust port so I also have respirator, glasses, earmuffs, gloves, and bandanna.
|
# ? Sep 11, 2014 22:01 |
|
Stultus Maximus posted:I just have a shop-vac for whichever tools have a dust port so I also have respirator, glasses, earmuffs, gloves, and bandanna. Is this because the shop vac is inefficient or some other reason?
|
# ? Sep 11, 2014 22:35 |
|
dhrusis posted:Is this because the shop vac is inefficient or some other reason? A shop vac is good for my power sanders but it really doesn't catch much from saws.
|
# ? Sep 11, 2014 22:46 |
|
I use a shop vac with a dust deputy on my sanders. The dust deputy made the vac work about three times better. Love that thing. Curious how the knock off above works. I'd buy one. I used the same setup for 2 years on my table saw and bandsaw. Not great but better than noticing, by far.
|
# ? Sep 12, 2014 00:16 |
|
So how does it make the vacuum work better? Is it just a matter of the filters being cleaner and that causing airflow to be less impeded?
|
# ? Sep 12, 2014 00:23 |
Basically. It's a cyclone separator, so by the time the air even gets to the vac, it's like 90% cleared already. The separator itself doesn't even HAVE a filter, it literally just spins the dust/debris out of the air, so it's extremely low resistance. Here's an animation showing how the dust is (almost entirely) separated from the air without a filter: https://www.youtube.com/watch?v=QfTZUMq-LGI
|
|
# ? Sep 12, 2014 00:29 |
|
Sylink posted:I look like I'm fighting ebola whenever I use all the tools since I don't have dust collection beyond a broom. yep. if I don't wear a respirator i cough constantly for days after using any power tools. which is another reason i'm mostly a hand tool guy, mostly.
|
# ? Sep 12, 2014 00:44 |
|
I did demolition for 7 years and didn't wear respirators/dust masks as often as I should have (nobody in the company did). Slowly I started getting more sensitive to dust of any sort, and now *need* to wear a respirator for any woodworking or I quickly get a sore throat and a cough. My lungs have been xrayed and auscultated and given a clean bill of health, but yeah, don't be me.
|
# ? Sep 12, 2014 03:46 |
|
wormil posted:Stellar! Is that a dye or stain? Thanks! It's dye... followed by shellac, then grain filler, then a couple coats of lacquer. I'm always a bit shaky on finishing, so I followed some pretty explicit advice on this. Turned out pretty well!
|
# ? Sep 12, 2014 04:46 |
|
Stavrogin posted:Thanks! It's dye... followed by shellac, then grain filler, then a couple coats of lacquer. I'm always a bit shaky on finishing, so I followed some pretty explicit advice on this. Turned out pretty well! Looks amazing, really nice work.
|
# ? Sep 12, 2014 05:19 |
|
His Divine Shadow posted:I consider this my actual first woodworking project. We needed a small shoe rack for the door in the laundry room and I figured I'd try building one. I just kinda winged the idea of the size and thought it out in my head. In retrospect I would do things differently and be more careful in others and definitely use more test pieces before cutting dados, which is doable but takes a while when you just have a rip blade. this looks really nice, i need to make one of these and im going to use your pics as inspiration, thanks!
|
# ? Sep 12, 2014 06:17 |
|
mds2 posted:I use a shop vac with a dust deputy on my sanders. The dust deputy made the vac work about three times better. Love that thing. Curious how the knock off above works. I'd buy one. I'm buying a dust deputy today. Using with a big shop vac. I guess I'm hoping that its powerful enough to use for all my tools given the suction will be fairly strong with the dust deputy in place. I've got my tools in the garage, and we I also use the garage to do workouts, so I'm worried about too much dust being a problem for cardio type stuff. Should I be scaaaaaaaaaaaared?
|
# ? Sep 12, 2014 16:12 |
|
dhrusis posted:I'm buying a dust deputy today. Using with a big shop vac. I guess I'm hoping that its powerful enough to use for all my tools given the suction will be fairly strong with the dust deputy in place. Just to be clear, Dust Deputy won't make it stronger, it'll just ensure the suction deteriorates much more slowly.
|
# ? Sep 12, 2014 16:19 |
|
TooMuchAbstraction posted:So how does it make the vacuum work better? Is it just a matter of the filters being cleaner and that causing airflow to be less impeded? Yes, exactly. A bag and a filter both start to clog the minute you start using them. The dust deputy eliminates the need for both of them. You get full power suction from your vac all the time.
|
# ? Sep 12, 2014 16:27 |
If you plan on using a shop vac for a bunch of tools, your biggest problem will be the longer hose, as the friction will slow your air flow drastically even over just, say, an extra 10'. A larger diameter hose will help alleviate that flow issue, but then you have slower air flow, so things don't get moved through the tube as well. That is, if you're moving 1000 cubic feet through a 2" hose every minute, it's gonna be blasting pretty hard but will take a ton of force to keep it going. Move the same 1000 cubic feet per minute through an airplane hangar and you'd have a hard time even knowing it's moving, much less sucking dust along with it, but it's practically frictionless. Also, a slight loss of suction at blast gates and the like if you have any.
|
|
# ? Sep 12, 2014 18:43 |
|
Bad Munki posted:If you plan on using a shop vac for a bunch of tools, your biggest problem will be the longer hose, as the friction will slow your air flow drastically even over just, say, an extra 10'. A larger diameter hose will help alleviate that flow issue, but then you have slower air flow, so things don't get moved through the tube as well. That is, if you're moving 1000 cubic feet through a 2" hose every minute, it's gonna be blasting pretty hard but will take a ton of force to keep it going. Move the same 1000 cubic feet per minute through an airplane hangar and you'd have a hard time even knowing it's moving, much less sucking dust along with it, but it's practically frictionless. I don't mind dragging the vac around to attach to the different dust ports of tools, just want to make sure there's nothing crazy I'm missing by using a shop vac + dust deputy vs. something like a regular dust collection system, which I assume is just more powerful...
|
# ? Sep 12, 2014 20:38 |
|
A shop vac moves less air but moves it faster, more suction in other words. A dust collector moves alot more air but slower, the DC is from what I've heard, much better suited at collecting dust and the like from large machines like table saws and such. I'll be making a diy shopvac with cylcone separator and put it on castors so I can hook it up to various machines, but my long term plan is to have a real dust collector hooked up to the cyclone and probably keep it stationary, but have 4" tubing along the walls with outlets I can plug machines like table saws and jointers into.
|
# ? Sep 12, 2014 20:53 |
|
His Divine Shadow posted:A shop vac moves less air but moves it faster, more suction in other words. A dust collector moves alot more air but slower, the DC is from what I've heard, much better suited at collecting dust and the like from large machines like table saws and such. I'll be making a diy shopvac with cylcone separator and put it on castors so I can hook it up to various machines, but my long term plan is to have a real dust collector hooked up to the cyclone and probably keep it stationary, but have 4" tubing along the walls with outlets I can plug machines like table saws and jointers into. Badass plan. That's when it becomes a "real shop" to me. Would just plugging into machines do the trick for all dust though? I find that when my shop vac is attached to my Dewalt 745, there's still dust on the top and around the base. Would you fix that with 2 ports, one to the saw and one on the ground with a special nozzle (like a reverse hood)?
|
# ? Sep 12, 2014 21:59 |
|
Just finished this. . . whatever you'd call it so that we can free up some more counter space and put our wine bottles somewhere. At the far right side there are three cubby shelves that you can see (on the end) that are about 10" deep. The frame is 5/8" G1S Ply with some slightly off-white paint and the top, lets drawers and trim are black walnut. Took me about a week to do as I had a lot of painting/oiling/sealing to do.
|
# ? Sep 12, 2014 23:41 |
|
Dust collector is awesome for sucking wasps out of midair. They have no hope. After a million years I finally got around to making a taper jig. One of those kind with a hinge. Glue is drying now and I still have to attach the metal slotted arm thingy.
|
# ? Sep 12, 2014 23:47 |
|
I bought one of those 3M 6000 series half mask respirators and its awesome. I originally bought it for sanding but I wear it all the time now in the shop if I am making dust. I have a goatee and I still get a good seal. The N95 series won't do that and are much more uncomfortable. The 6000 series is about as comfortable as a respirator can be. The only downside is my neighbors probably think I'm making meth when I walk outside to do something. Three years ago I made two adirondack chairs out of cedar. They required a ton of contour sanding. It was cold and flu season and I got a chest cold so bad that it hurt to breathe and I coughed for three weeks. That was my wake up call. Don't mess with sawdust folks.
|
# ? Sep 13, 2014 14:19 |
|
dhrusis posted:Badass plan. That's when it becomes a "real shop" to me. Would just plugging into machines do the trick for all dust though? I find that when my shop vac is attached to my Dewalt 745, there's still dust on the top and around the base. Would you fix that with 2 ports, one to the saw and one on the ground with a special nozzle (like a reverse hood)? My table saw has an overhead blade guard so I will be hooking the DC up to it and the base of the table saw, it's all designed to be hooked up to a DC as it's a 2nd hand industrial machine. The guard is just too big and clumsy though, all sheet metal and steel. Gonna build one much narrower from Lexan instead so I can see what I am working on. justincredible posted:this looks really nice, i need to make one of these and im going to use your pics as inspiration, thanks! Oh btw thanks
|
# ? Sep 13, 2014 16:34 |
|
LordOfThePants posted:I bought one of those 3M 6000 series half mask respirators and its awesome. I originally bought it for sanding but I wear it all the time now in the shop if I am making dust. Bought one of these due to your post. Thanks. http://www.amazon.com/3M-Paint-Proj...#productDetails Gotta get my sawdust under control! Also my wife can use it for mixing lye when soapmaking.
|
# ? Sep 13, 2014 17:34 |
|
I know I'm about 10 years late to the party but Sketchup is pretty loving neat. I won't say I've found it especially intuitive so far but I've only been messing around with it for a week and I'm starting to get the hang of things. This is a shelf someone requested I build, being able to send them something that's relatively close to the final product is much better than my usual childlike scratching on notebook paper.
|
# ? Sep 14, 2014 06:38 |
|
LordOfThePants posted:I bought one of those 3M 6000 series half mask respirators and its awesome. I originally bought it for sanding but I wear it all the time now in the shop if I am making dust. I usually wind up coughing for most of the evening from just doing hand sawing (I used to have asthma and kind of have lovely lungs I think). Unless you're doing hand chisel or handplane work, wear a loving dust mask.
|
# ? Sep 14, 2014 09:14 |
|
So I made these things. I'm posting them here because I asked a few questions here and received good tips. Bread board (wild cherry and purple heart) Coasters (peruvian walnut, tigerwood, mahogany and sapele) Cutting board (wild cherry and purple heart)
|
# ? Sep 14, 2014 15:15 |
|
Very nice. That is some fantastic grain on the cherry in the cutting board, so uniform.
|
# ? Sep 14, 2014 16:30 |
|
Second coat (of the surface). Starting to look a lot more even. The 800 grit sandpaper was definitely a good idea, plus I found a new cheap cotton cloth to help wipe up the dust before application.
|
# ? Sep 14, 2014 23:13 |
|
Got tired of looking for paint cans or buckets the right size for a circle so I made John Heisz beam compass. Took about 30 minutes not counting glue drying. Used a leg from a tv tray my neighbor tossed out, I think the wood is lauan. Sorry for the crappy pic, my phone died so I used my camcorder. I didn't bother with his plans, just copied the basic construction. Mine has about a 12" radius, plenty big for any circle I will draw.
|
# ? Sep 15, 2014 03:02 |
|
KingColliwog posted:So I made these things. I'm posting them here because I asked a few questions here and received good tips. i like the purple heart
|
# ? Sep 15, 2014 04:32 |
|
Hey guys, does anyone have any advise for babby's first bandsaw? I'm thinking about going in cheap (maybe ~200?) to try my hand at making bandsaw boxes and other small projects. Is this a good idea, or should I just screw my jigsaw upside down on a board?
|
# ? Sep 15, 2014 15:44 |
|
|
# ? May 16, 2024 18:35 |
|
If you want to try to save money on a bandsaw, I'd recommend trying to find a nicer quality but used one. If you buy a cheaper, new, bandsaw, you're just going to get frustrated when it doesn't have the power, or the features, or the size, or whatever it was you compromised on to save money. That being said, I looked for a used saw for a long time and never found one, and ended up buying a new one from Grizzly (no regrets, love it).
|
# ? Sep 15, 2014 17:58 |