|
FuzzKill posted:Is my garage going to fail?! I'm not a big beer drinker Beer drinking only really comes naturally to those who have garages. You'll see.
|
# ? Nov 16, 2014 22:03 |
|
|
# ? Jun 5, 2024 03:43 |
|
meatpimp posted:Beer drinking only really comes naturally to those who have garages. You'll see. This is ridiculously true. It feels odd to be in the garage without beer.
|
# ? Nov 16, 2014 22:22 |
|
Thanks for the custom av, anonymous fellow beer-drinker!
|
# ? Nov 17, 2014 22:12 |
|
Its very pleasing to sit in your garage and watch others tinker away while you drink beer like some sort of alcoholic foreman
|
# ? Nov 18, 2014 06:53 |
|
8ender posted:Its very pleasing to sit in your garage and watch others tinker away while you drink beer like some sort of alcoholic foreman It's not very fun when you're the one working while the other guy is sitting drinking beer
|
# ? Nov 21, 2014 19:27 |
|
Fall!!! Fall... My favorite Subaru guy from the Subaru group (the one that brings the most beer, as well as the Dale's Pale Ale) came by to pick up InitialDave's Stoptech pads. While he was here I convinced him to change out his front struts: He isn't very mechanically inclined, so I told him I'd show him how and all that. Here he is learning how to use air tools: Here I am drinking his Dale's Pale Ale: It literally took 30 minutes, with me taking my time to teach and with a tire swap as well. New tires and new front ride height: New currency in the cash register: one case of yuengling for the brakes, one case of Yuengling for the strut job. Also holy gently caress InitialDave this Irn Brau stuff is god damned delicious: You'll have to excuse me. As the seasons change I've seem to come down with a bad case of vertical-phone-itis.
|
# ? Nov 22, 2014 23:13 |
|
Adiabatic posted:Fall... Adiabatic posted:My favorite Subaru guy from the Subaru group (the one that brings the most beer, as well as the Dale's Pale Ale) came by to pick up InitialDave's Stoptech pads. While he was here I convinced him to change out his front struts: Adiabatic posted:Also holy gently caress InitialDave this Irn Brau stuff is god damned delicious:
|
# ? Nov 22, 2014 23:27 |
|
By which InitialDave means "eat everything battered & deep fried". I've been to Scotland, I know what passes for food there. This is a cool thread and i wish there was a local Goon with a setup like this where I could trade beer for hoist time. Even just for oil changes on the wife's grocery getter, I hate jacking things up.
|
# ? Nov 23, 2014 01:32 |
|
as a totally mechanical fool I appreciate having friends that will watch me work on a car and make sure I don't kill myself. We have a rule that he won't wrench on the car for free, but he is happy to make sure I don't die while drinking my beer. As it goes I haven't spent a dime in a shop in 4 years and I haven't even died! Really jealous of the shop and if I didn't live cross country I would absolutely bring beer and fried chicken as currency.
|
# ? Nov 24, 2014 02:13 |
|
Man this thread is great. I'm jealous of the lift, I've never been a tech but when I worked at a shop the techs would let me use them, and the detail bay. Mostly because I provided comic relief because I know just enough to get myself into trouble. I don't even have a garage or driveway any more. I may have to make arrangements to swing by your place with some beer at some point.
|
# ? Nov 24, 2014 23:57 |
|
Maksimus54 posted:as a totally mechanical fool I appreciate having friends that will watch me work on a car and make sure I don't kill myself. My ex-mechanic father in law is the same. If it starts to go horribly wrong (and it has on a couple of occasions) he jumps in and finishes it off. Much safer that way
|
# ? Nov 25, 2014 03:12 |
|
A slight derail: the current DD... Mr. 2-Slow. He really really likes this garage. He fancies it his home. His previous owner assured me that, very specifically, the front suspension was new and would not give me any problems. I brushed this off, as the PO (a mechanical engineering student, therefore retard) didn't seem to know much about it aside from "SLAM CAMBER, AUTOCROSS, WOO". Front suspension repairs so far: Steering wheel would "set" 30° to the left if you loaded one corner, and set back to square dead nuts aligned if you loaded the opposite corner. A little research showed this to be the little plastic bushing inside the manual rack. Popped it on the lift to replace the bushing along with the rack grommets, saw the sway bar links were incorrectly installed and one was busted and rattly, despite being new. Ordered both of them. While replacing the bushing I saw the inner tie rods were replaced. Apparently this, with improperly installed stab links, is "new front suspension". Before the sway bar links got here, I got a deep hum. Been down that road before. Ordered wheel bearings. Shook the tires down, found my passenger strut mount had failed. Ordered both. Hum went away with the new wheel bearings, suspension play went away with the new strut mounts, but a vibration around 60 crept up. The tires were recently balanced and I didn't see any remnants of a weight that decided to end it all... turns out, the idiot never put centering rings on his sweet aftermarket Borbet rims. The ID of the rim is 73mm, and the hub ring OD is 60mm... ordered centering rings. The shake must have bumped poo poo loose, because my perfectly functional and no-signs-of-impending-doom driver's strut (the one without the mount problem) just started violently going wrong. It has a shake-down play like a ball joint that's about to pop out of its socket, only you can see the shaft moving independent of the body. Centering rings are here, but the cartridges won't be until after Thanksgiving. I've quit driving it until I can get strut cartridges replaced. Good loving god. I'm probably about $200 away from replacing every wear part in the front suspension, and I'm mulling over just doing it because they're all apparently time-bombs. Every time I put this thing on the lift I see that idiot's cheeky grin in my head and hear him say "But the front suspension is perfect! You won't have to worry about that!" I should've known, AI.
|
# ? Nov 25, 2014 21:55 |
|
And I bet you were wondering where all that beer went...
|
# ? Nov 25, 2014 21:55 |
|
gently caress POs forever, man.
|
# ? Nov 25, 2014 21:59 |
|
When summer rolls around, I'mma come visit. I'll probably have some parts like new shocks/suspension to pop on, simply because my 300ZX just rides reaaaaaally stiff. Really really stiff.
|
# ? Nov 25, 2014 22:01 |
|
Terrible Robot posted:gently caress POs forever, man. Absolutely this. The guy I bought my Century wagon from swore up and down that he had had the lower intake manifold gasket done, which is a known issue on the 3100 engine. When the head gaskets popped five days after I got the thing home, I tore it down and found the factory plastic LIM gaskets. Good thing for him he was 250 miles away or I just might have driven the car into his house.
|
# ? Nov 26, 2014 06:04 |
|
Terrible Robot posted:gently caress POs forever, man. My Miata PO had a squeaky speedo cable, and dutifully greased it. The outside of it. With chain lube.
|
# ? Nov 26, 2014 06:23 |
|
Terrible Robot posted:gently caress POs forever, man. Can this be PO unappreciation week?
|
# ? Nov 26, 2014 06:28 |
|
cursedshitbox posted:Can this be PO unappreciation week? I'll go get my Appreciation Bat!
|
# ? Nov 26, 2014 06:29 |
|
cursedshitbox posted:Can this be PO unappreciation week? Every week is PO unappreciation week.
|
# ? Nov 26, 2014 06:56 |
|
IOwnCalculus posted:Every week is PO unappreciation week. I really need to put my swedish princess on Adiabatic's lift and gently caress her underbody.
|
# ? Nov 26, 2014 17:17 |
|
Adiabatic posted:Also holy gently caress InitialDave this Irn Brau stuff is god damned delicious: Due to this thread I decided to try this stuff myself. (You can order ANYTHING on Amazon these days. It's like a slow version of the Star Trek replicator, tell it what you want, 3-5 days later it shows up.) Trip Report: Pretty drat tasty, like orange soda with a creme-soda aftertaste. A+++ would drink again.
|
# ? Nov 27, 2014 04:51 |
|
Dannywilson posted:Trip Report: Pretty drat tasty, like orange soda with a creme-soda aftertaste. A+++ would drink again. So, its FOUR LOKO for
|
# ? Nov 27, 2014 05:02 |
|
Viggen posted:So, its FOUR LOKO for It doesn't have alcohol in it, so, no?
|
# ? Nov 27, 2014 05:04 |
|
Terrible Robot posted:It doesn't have alcohol in it, so, no? Oops! I figured that it was as it was Scottish.
|
# ? Nov 27, 2014 05:08 |
|
Viggen posted:So, its FOUR LOKO for Just soda. I may have alcohol in me at spookykid fucked around with this message at 05:30 on Nov 27, 2014 |
# ? Nov 27, 2014 05:25 |
|
Viggen posted:Oops! I figured that it was as it was Scottish. To be fair, that's a pretty reasonable assumption to make about a Scottish drink.
|
# ? Nov 27, 2014 05:31 |
|
https://www.youtube.com/watch?v=H4PxuFQCDis
|
# ? Nov 27, 2014 18:46 |
|
The "gets you through" Irn Bru advert series is loving hilarious. WKD do an Iron Brew flavour, there's a cocktail called a Demeanor which has a similar taste to Irn Bru. Of course, the correct technique is to pour regular Irn Bru down your gullet over a preparatory dose of Tennent's, separating the dissimilar liquids with a fish supper or a munchie box.
|
# ? Nov 27, 2014 20:26 |
|
Viggen posted:So, its FOUR LOKO for Fixed that for you. Remember - Scottish
|
# ? Nov 27, 2014 20:29 |
|
Out at my girlfriends aunts place in Augusta. Her boyfriend's got a bunch of cool toys. Pics to follow when I get back.
|
# ? Nov 28, 2014 18:30 |
|
Adiabatic posted:A slight derail: the current DD... Mr. 2-Slow. The hubcentric rings make a massive difference on the sw20 with aftermarket wheels, the light front end seems to make any vibration worse. Might as well go all the way and get a set of koni sports, eibach/h&r springs and some stiffer sways. Then pick up a bush kit, the prothane ones are pretty cheap on ebay. Not sure about the us cars but if its a 89/91 they also have adjustable caster. Also if you get konis they have a lifetime warranty in the us, unlike in europe where the drat things are built.
|
# ? Nov 28, 2014 21:06 |
Adiabatic posted:Out at my girlfriends aunts place in Augusta. Her boyfriend's got a bunch of cool toys. Pics to follow when I get back. I first read this as "my girlfriends place in Augusta" and was VERY confused.
|
|
# ? Nov 28, 2014 21:30 |
|
Went to Georgia this weekend. It was pretty god damned AI/TFR/TCC. My girlfriend's uncle has a bunch of cool toys. He's got a workshop with a lift: A wood stove: A sweet metal bench with a vise: Some other cool poo poo: This thing: All these things: I drove that one in the foreground some: https://www.youtube.com/watch?v=frYUU_ISgUY https://www.youtube.com/watch?v=-X5qWtfEZZI We also shot stuff: Here's my girlfriend's brother-in-law shooting a tub of tannerite with a .30-06 (oops vertical video): https://www.youtube.com/watch?v=W2utgtOIWRE I also shot a .45-70. God drat. Got back to Richmond at 7pm last night, popped the new struts in the MR2 that arrived while I was gone, went to a local car meetup thing where I saw this amusing license plate: All in all a decent holiday weekend. Back to the grind.
|
# ? Dec 1, 2014 16:59 |
|
Adiabatic posted:I also shot a .45-70. God drat. That's about what I said the first time I shot one. So much fun.
|
# ? Dec 1, 2014 22:19 |
|
Seat Safety Switch posted:My Miata PO had a squeaky speedo cable, and dutifully greased it. The outside of it. With chain lube. That's awesome and it made me laugh. In exchange I'll share that I used dialectric grease on my coil-on-plug ignition terminals because I had a bit of a misconception of what it does.
|
# ? Dec 1, 2014 22:41 |
|
Adiabatic posted:Got back to Richmond at 7pm last night, popped the new struts in the MR2 that arrived while I was gone, went to a local car meetup thing where I saw this amusing license plate: Ah yes, I know that car! I would've been going to that meet if I wasn't otherwise in LA this week. >:|
|
# ? Dec 3, 2014 02:58 |
|
I'm guessing you also drank the can of thinner?
|
# ? Dec 3, 2014 08:25 |
|
Moxie Omen posted:Ah yes, I know that car! I would've been going to that meet if I wasn't otherwise in LA this week. >:| Yeah? I met that dude that has the blue Mustang and does the videos on Youtube, and didn't realize it was him until he said something about it. Super nice guy. Come find me next time you're out there on a warm Sunday. The MR2 is usually to the left under a tree, and I'll probably be with the anti-social Subarus in a Brembo hoodie. ShittyPostmakerPro posted:I'm guessing you also drank the can of thinner?
|
# ? Dec 3, 2014 14:17 |
|
|
# ? Jun 5, 2024 03:43 |
|
Got the right OD hub rings finally. Just got back from the test drive and now I've got a constant vibration at 60, but it's half what it used to be when it was intermittent. One of the wheels must be out of balance. Holy poo poo does it like corners now...
|
# ? Dec 4, 2014 03:08 |