|
Primo Itch posted:Yep. The thing with ektar isn't the scanning, but how it has crazy colour shifts unless perfectly exposed and how it doesn't handle low-light situations well. It's also supposed to have some insanely small grain, but I've never had the opportunity to scan it at high enough resolutions to figure out if its true. Here's a thing with a 5DII up against 35mm Ektar and also some Vision3 500T http://www.twinlenslife.com/2011/01/digital-vs-film-canon-5d-mark-ii-vs.html
|
# ? Nov 26, 2014 23:19 |
|
|
# ? May 30, 2024 13:23 |
|
Primo Itch posted:Yep. The thing with ektar isn't the scanning, but how it has crazy colour shifts unless perfectly exposed and how it doesn't handle low-light situations well. It's also supposed to have some insanely small grain, but I've never had the opportunity to scan it at high enough resolutions to figure out if its true. I have scanned medium format Ektar at roughly 4800 DPI and it's gorgeous. But as others have said the light needs to be right, and even then colour shifts can happen. The highlight range is quite good, though. It's the shadows that are lacking (and purple). Still, even so - it's not the most resolving film. In my experience that honour belongs to Fuji's Acros 100 (in Fuji's Microfine), Provia 100F and 64T (Type I and II, the newest III has lower RMS but terrible colour and lower resolution.) which out-resolve my scanner.
|
# ? Nov 27, 2014 02:05 |
|
Anyone ever had an issue with their Pentax 6x7 where the exposure dial is loose and just spins all the way around without stopping on any individual setting? I'm in Iceland right now and having this issue and need to know if I'm able to fix this myself with commonly available tools ASAP. :/ I have my Mark III with me but it's not the same
|
# ? Nov 29, 2014 12:35 |
|
dorkasaurus_rex posted:Anyone ever had an issue with their Pentax 6x7 where the exposure dial is loose and just spins all the way around without stopping on any individual setting? I'm in Iceland right now and having this issue and need to know if I'm able to fix this myself with commonly available tools ASAP. :/ On my 67 (first gen) the shutter dial is held in by three tiny screws the side of the dial that use a very small standard drive screw driver. Sounds like they might be loose, can you pull the dial up and down?
|
# ? Nov 29, 2014 13:16 |
|
Ezekiel_980 posted:On my 67 (first gen) the shutter dial is held in by three tiny screws the side of the dial that use a very small standard drive screw driver. Sounds like they might be loose, can you pull the dial up and down? Only just barely
|
# ? Nov 29, 2014 15:53 |
|
Ezekiel_980 posted:On my 67 (first gen) the shutter dial is held in by three tiny screws the side of the dial that use a very small standard drive screw driver. Sounds like they might be loose, can you pull the dial up and down? I had the exact same issue, easily fixed with a jeweler's screwdriver.
|
# ? Nov 29, 2014 17:26 |
|
Pics from an old Wizard of oz theme park in NC. Mamiya 645, 45mm 2.8 w/ CPL, Portra 400 (box speed) 07320005 by Dingus Falcon, on Flickr 07320009 by Dingus Falcon, on Flickr 07320011 by Dingus Falcon, on Flickr Something happened during scanning, leaving a big scratch down the right side :/
|
# ? Nov 29, 2014 19:34 |
|
murp posted:Pics from an old Wizard of oz theme park in NC. Mamiya 645, 45mm 2.8 w/ CPL, Portra 400 (box speed) That's happened to me. Your calibration zone is dusty.
|
# ? Nov 29, 2014 21:05 |
|
trash by PC-P, on Flickr
|
# ? Nov 29, 2014 21:44 |
|
JWCC by alkanphel, on Flickr
|
# ? Dec 2, 2014 00:21 |
|
alkanphel posted:
Niiiice
|
# ? Dec 2, 2014 11:59 |
|
eggsovereasy posted:Fuji has some authorized service centers with the gw690 specified as a model they work on listed here: http://www.fujifilmusa.com/support/ServiceSupportProductContent.do?dbid=670678&prodcat=701538&sscucatid=664278 I emailed all of these people and most got back to me saying that they are no longer authorized Fuji repair shops. However Professional Photographic Repair in San Diego quoted me $350 to service the shutter.
|
# ? Dec 2, 2014 17:20 |
|
I just bit the bullet on an ebay auction for a GW690II
|
# ? Dec 5, 2014 04:26 |
|
If anyone is interested, there's a really nice looking 690II at only $202 USD right now with less than 12 hours left. Considering $300 is a good deal, you might be able to snag this for even less: http://www.ebay.com/itm/390990773767?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
|
# ? Dec 5, 2014 21:04 |
|
Tragic twist in my saga of Yond Cassius' Astia project. My Kiev 60 jammed on frame 5. The film advance lever goes no further than about 1/4 of the distance it's supposed to go, the shutter cannot be cocked, and the film cannot be moved on the rolls - normally the uptake roll can be ratcheted forward but this action is also jammed. If I can't figure this out, I'll move the film to my ancient 6x9 folder, so it's not (yet) a total loss. Has anyone had a similar problem in either a Kiev 60 or the Pentacon Six it's based on?
|
# ? Dec 6, 2014 01:33 |
|
Jurong West by alkanphel, on Flickr
|
# ? Dec 6, 2014 02:48 |
|
ExecuDork posted:Tragic twist in my saga of Yond Cassius' Astia project. My Kiev 60 jammed on frame 5. The film advance lever goes no further than about 1/4 of the distance it's supposed to go, the shutter cannot be cocked, and the film cannot be moved on the rolls - normally the uptake roll can be ratcheted forward but this action is also jammed. On the Pentacon Six there is a little tiny lever under the film advance that will unjam it. I don't see it in pictures of the Kiev, though, so that may be one of the mechanisms that got simplified away. This is, however, my nigh-universal unjamming technique: 1 - Take note of which exposure you're on. 2 - Put the camera in a dark bag, or get yourself (with the camera) into a darkroom. Safelights off, of course. 3 - Open the back of the camera just enough to let it reset the film counter, de-tension everything, and think it's back at the beginning of the roll. 4 - Close camera back up and try winding again. 5 - Shoot the rest of the roll, counting in your head (or on a stickynote on the camera). You will lose the little bit of film you advanced on this frame, but there's enough extra length in 120 to make up for that and still give you 12 exposures.
|
# ? Dec 6, 2014 04:36 |
|
Sleepy Catte by Christian Obermanns, on Flickr Learning the ways of my new Pentax 67. Does anyone have a good light meter suggestion? The prism works some of the time, but it's very hit or miss and i'd like to get something to double check / do incident metering.
|
# ? Dec 9, 2014 06:23 |
|
I picked up a Gossen Digisix based on some goon recommendations and it's treated me well so far.
|
# ? Dec 9, 2014 07:06 |
|
Baron Dirigible posted:Gossen Digisix
|
# ? Dec 9, 2014 07:10 |
|
Ethanfr0me posted:Sleepy Catte by Christian Obermanns, on Flickr If you don't have the money for an actual meter, there are a number of smart phone apps that work fine in a pinch. I use the one called (for some reason) Light Meter. It also cuts down on the amount of poo poo you have to carry and is a little more inconspicuous if you're shooting in public.
|
# ? Dec 9, 2014 17:00 |
|
Is there any way to avoid getting streaking from lights on long exposures with the GW690?
|
# ? Dec 9, 2014 19:15 |
|
try it with a lime posted:Is there any way to avoid getting streaking from lights on long exposures with the GW690? Do you have an example? I haven't seen that yet.
|
# ? Dec 9, 2014 19:16 |
|
try it with a lime posted:Is there any way to avoid getting streaking from lights on long exposures with the GW690? In the frame? Out of the frame?
|
# ? Dec 9, 2014 20:06 |
|
try it with a lime posted:Is there any way to avoid getting streaking from lights on long exposures with the GW690? Yes, you need to end the long exposure by covering the lens with the cap or your hand etc, and then rolling the film on to the next frame triggering the shutter.
|
# ? Dec 9, 2014 20:25 |
|
I hadn't even thought of that. Usually I do cover it, but that would explain the inconsistency of it. Thanks.
|
# ? Dec 9, 2014 20:31 |
|
I ended up using shots with streaks in the exhibition I had this year, sometimes they work well, other times they just look a little lovely, especially in horizontal shots.
|
# ? Dec 10, 2014 02:14 |
|
This thing looks brand new. The counter only shows 45. I wonder if that's accurate or it's been reset or rolled over 999. Based on the condition, I would believe it's only taken 450 photos.
|
# ? Dec 10, 2014 21:50 |
|
BANME.sh posted:
So sexy.
|
# ? Dec 10, 2014 22:47 |
|
My wife is laughing at me because of how clownishly large it is
|
# ? Dec 10, 2014 22:52 |
|
BANME.sh posted:My wife is laughing at me because of how clownishly large it is Go get a GX680 and she'll stop laughing.
|
# ? Dec 11, 2014 00:57 |
|
Probably the previous owner could only afford to shoot 450 pictures before running out of money and having to sell the camera to continue to eat.
|
# ? Dec 11, 2014 02:15 |
|
I powered through the first test roll with this thing and people weren't kidding when they said the lens was contrasty. BANME.sh fucked around with this message at 18:03 on Dec 11, 2014 |
# ? Dec 11, 2014 07:25 |
|
Wow you don't mess around. Great now I have to sell some camera gear to buy one.
|
# ? Dec 11, 2014 07:32 |
|
I have no regrets. I was able to take both of those handheld at 1/30s because of the leaf shutter.
BANME.sh fucked around with this message at 07:42 on Dec 11, 2014 |
# ? Dec 11, 2014 07:38 |
|
Too bad the stuff I'm willing to sell is garbage nobody wants. Looks awesome, great purchase.
|
# ? Dec 11, 2014 07:43 |
|
Tada. Stars by Paul Frederiksen, on Flickr Also, I have the 6x7 45mm lens showing up tomorrow
|
# ? Dec 11, 2014 16:53 |
|
crap nerd fucked around with this message at 22:19 on Dec 11, 2014 |
# ? Dec 11, 2014 22:02 |
|
|
# ? Dec 13, 2014 14:17 |
|
|
# ? May 30, 2024 13:23 |
|
|
# ? Dec 13, 2014 19:54 |