|
Same Great Paste posted:You're saying that preheating my pan to 800F and leaving it alone and dry to even out for 5 minutes is no problem at all? When the gray spot appeared I just assumed that I had damaged it from asking too much. Uhhh, no? That's like self cleaning oven temperatures. Your PAN will be fine, but you will burn off whatever season (or anything else for that matter) you may have started to have on it. I've certainly never cooked at such a high temperature, and honestly it seems incredibly overkill, unless you're trying to go for some sort of gross Pittsburgh Black & Blue style. That high of a heat has always seemed more like brand bragging than anything functional to me.
|
# ? Nov 25, 2014 09:49 |
|
|
# ? May 26, 2024 16:45 |
|
Drifter posted:Uhhh, no? That's like self cleaning oven temperatures. Your PAN will be fine, but you will burn off whatever season (or anything else for that matter) you may have started to have on it. Pittsburg style is delicious what is wrong with you. But yeah don't do that you're going to hurt your season. I only ask for that at restaurants I trust.
|
# ? Nov 25, 2014 10:20 |
|
Great, Thank you for clarifying. So when a recipe says to get the pan as hot as you possibly can, what do they really mean? Where do I set it? If I crank it I top 800F.
|
# ? Nov 25, 2014 10:34 |
|
Same Great Paste posted:Great, Thank you for clarifying. I'm totally approximating based on random poo poo, but I'd say you don't need to go much past 500F - 270ishC. That's really fuckin' hot. If you want an easier approximation, it's when a higher smoke point oil starts to smoke heavily. That lets you get a figure with relation to time, I suppose. Or just preheat in an oven until it hits 500F and put it on the flame for a few more seconds before laying the meat. There are many ways to make a steak, and many temperatures, so just do what you like the best. You're only wrong if you over cook it (or don't manage a crust). Drifter fucked around with this message at 11:12 on Nov 25, 2014 |
# ? Nov 25, 2014 11:04 |
|
Cast iron isn't as 'even heating' as some people make it out to be. If you put it on the stove and crank the burner up you're going to get a big hot spot right in the middle When I do steaks I do them right around medium heat. I know that doesn't mean much because every stove is different, but I don't do them anywhere near as hot as I can go. And do use a little bit of oil because I don't want that 'scorched' surface, it's not like on a grill where I can go as hot as I can stand it. I almost get a little bit of a of fried crust on them.
|
# ? Nov 25, 2014 15:32 |
|
Bob Morales posted:Cast iron isn't as 'even heating' as some people make it out to be. If you put it on the stove and crank the burner up you're going to get a big hot spot right in the middle To help with the heat dispersion in the CI, I've taken to putting the pan in the oven at 400-450 for 20-30 mins and then putting it on the stove for the sear.
|
# ? Nov 25, 2014 17:56 |
|
Some friends were without power for the weekend, cast iron to the rescue!
|
# ? Nov 25, 2014 17:59 |
|
Bob Morales posted:When I do steaks I do them right around medium heat. I know that doesn't mean much because every stove is different, but I don't do them anywhere near as hot as I can go. I do the same. Electric range, medium heat is as much as I need. The safflower oil I use, with a smoke point of 510°F/265°C, will start to smoke at that point. Anything above that is pretty much reserved for boiling water. Indolent Bastard posted:Some friends were without power for the weekend, cast iron to the rescue! You're a beautiful human being.
|
# ? Nov 25, 2014 19:54 |
|
Indolent Bastard posted:Some friends were without power for the weekend, cast iron to the rescue! You could do some serious paella on that.
|
# ? Nov 25, 2014 21:13 |
|
Baron Fuzzlewhack posted:I do the same. Electric range, medium heat is as much as I need. The safflower oil I use, with a smoke point of 510°F/265°C, will start to smoke at that point. Anything above that is pretty much reserved for boiling water. I really wish this info was more widespread, every cast iron steak recipe just has a blanket "crank it to 11, the hotter the better" for temperature. There's an electric range in my current apartment and setting the temp super hot literally smoked me out the first bunch of times I tried searing with it.
|
# ? Nov 26, 2014 00:39 |
|
Why not to crank your stove to Max: https://www.youtube.com/watch?v=r8zGEc2ohBM
|
# ? Nov 26, 2014 00:59 |
|
Some good advice. I havent made a steak on a skillet in a while but i was starting to think that there is a such thing as too hot. makes sense from my experiences. Last beef i did was burgers and i did them on medium, flipped often and had great results. Had a good crust and the whole patty was meduim rare; almost looked like a sous vide burger.
|
# ? Nov 26, 2014 04:35 |
|
Bob Saget IRL posted:Some good advice. I havent made a steak on a skillet in a while but i was starting to think that there is a such thing as too hot. makes sense from my experiences. Last beef i did was burgers and i did them on medium, flipped often and had great results. Had a good crust and the whole patty was meduim rare; almost looked like a sous vide burger. I don't know about everybody else's experience, but I've never gone higher than medium heat. I just give the pan a bit of time to heat up, add butter because, man, steak in butter is something you can't beat when it comes to taste, bless my future heart attack. Two minutes each side, and done. With two minutes on each side, I'm only speaking for the absurdly thin steaks that are available around here.
|
# ? Nov 26, 2014 06:35 |
|
Indolent Bastard posted:Some friends were without power for the weekend, cast iron to the rescue! holy gently caress you own. (what did the pan look like afterwards? Hopefully equally awesome?)
|
# ? Nov 26, 2014 09:43 |
|
Paper With Lines posted:holy gently caress you own. Seriously this rocks, no matter the consequences.
|
# ? Nov 26, 2014 10:37 |
|
ColdPie posted:Why not to crank your stove to Max: It's good to see Heisenberg is staying busy after his meth empire collapsed.
|
# ? Nov 27, 2014 17:36 |
|
Paper With Lines posted:holy gently caress you own. The pan looked fine a little sooty on the bottom, but otherwise just fine.
|
# ? Nov 27, 2014 19:58 |
|
I found a griswold #3. Took a drill brush to it, and made it look silver. I've cleaned a couple other old pans and they always look black still. I just thought i cleaned this one more. But i seasoned it, used it, but when i wipe it with a bit of paper towel it looks dirty. Like im wiping a drill bit after drilling through steel. Someone else posted abour chrome or nickel plated cast iron.. is thst what i got? Should i be treating it different? I need to know cause its great for a couple eggs.
|
# ? Dec 8, 2014 06:23 |
|
Bob Saget IRL posted:I found a griswold #3. Took a drill brush to it, and made it look silver. I've cleaned a couple other old pans and they always look black still. I just thought i cleaned this one more. But i seasoned it, used it, but when i wipe it with a bit of paper towel it looks dirty. Like im wiping a drill bit after drilling through steel. Someone else posted abour chrome or nickel plated cast iron.. is thst what i got? Should i be treating it different? I need to know cause its great for a couple eggs. When you strip off the seasoning, it should be silver underneath. If the pans you were cleaning before were still black, then you weren't cleaning them thoroughly. You need to wipe it really well with water after cleaning and dry it thoroughly to get off all the metal and seasoning bits you sanded off then immediately season so it doesn't rust, which it will attempt to do in a matter of minutes. Here is one I recently refinished:
|
# ? Dec 8, 2014 15:20 |
|
Flash Gordon Ramsay posted:When you strip off the seasoning, it should be silver underneath. If the pans you were cleaning before were still black, then you weren't cleaning them thoroughly. You need to wipe it really well with water after cleaning and dry it thoroughly to get off all the metal and seasoning bits you sanded off then immediately season so it doesn't rust, which it will attempt to do in a matter of minutes. That explains why my wapak dutch ovens seasoning didnt last. The griswold is fine; i just just wasnt washing it out well enough and burning the little residue that remained. Good stuff. Never go away, fgr. Youre my favorite poster.
|
# ? Dec 10, 2014 03:12 |
|
Tonight I'll be attempting whole spatchcocked chicken in the skillet. Few minutes on stovestop at very high heat to crisp skin, then into the oven with some potatoes. I get the feeling even if it doesn't turn out perfect it will still be goddamn delicious.
|
# ? Dec 10, 2014 22:14 |
|
Get some turnip going in there, as well, and it will be awesome.
|
# ? Dec 10, 2014 23:46 |
|
I don't have turnips. But I was right, turned out fuckin' delicious. Next time think I'll throw some tarragon and garlic.
|
# ? Dec 11, 2014 01:04 |
|
Roasted turnip and carrot is delicious.
|
# ? Dec 11, 2014 01:20 |
|
I thought I was the only one who liked the soggy but delicious veggies roasted in the same CI pan as a chicken!
|
# ? Dec 11, 2014 01:55 |
|
The wife ruined my enameled dutch oven so I want to buy a pre-seasoned cast iron version this time. I'm on the fence between several options: Lodge L8DD3 Double Dutch Oven and Casserole with Skillet Cover, 5-Quart - benefits are two for one, skillet + dutch oven. - cons are you can pick up the lid one handed for a quick stir http://smile.amazon.com/gp/product/B000LEXR0K/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER Lodge L8DOL3 Pre-Seasoned Cast-Iron Dutch Oven with Dual Handles, 5-Quart http://smile.amazon.com/Lodge-L8DOL3-Pre-Seasoned-Cast-Iron-Handles/dp/B00063RWYI/ref=pd_sbs_k_8?ie=UTF8&refRID=1ENC7S4HK65AVCFHFW5Z Lodge L8DO3 Pre-Seasoned Dutch Oven, 5-Quart - this type has a single handle like a bucket http://smile.amazon.com/dp/B00006JSUF/ref=psdc_289818_t2_B00063RWZM Heuck 33003 Pre-Seasoned Cast Iron Covered Dutch Oven, Black http://smile.amazon.com/Heuck-33003...iron+dutch+oven King Kooker CI4S Pre-seasoned Outdoor Cast Iron Dutch Oven, 4-Quart -con, only 4 qt http://smile.amazon.com/King-Kooker...rds=king+kooker Heuck is the cheapest but I'm not familiar with that brand. It also has a plastic knob on the lid. Comments? Suggestions?
|
# ? Dec 11, 2014 08:47 |
|
wormil posted:The wife ruined my enameled dutch oven sever
|
# ? Dec 11, 2014 09:09 |
|
How in the world did your wife ruin an enamel dutch oven? I'd get this one: Lodge L8DOL3 Pre-Seasoned Cast-Iron Dutch Oven with Dual Handles, 5-Quart http://smile.amazon.com/Lodge-L8DOL...S4HK65AVCFHFW5Z It's got the fewest goofy features.
|
# ? Dec 11, 2014 16:18 |
|
I would stay away from the bucket handle one unless you plan on using it in a campfire. I have it, and the handle really just gets in the way.
|
# ? Dec 11, 2014 16:20 |
I really like http://www.amazon.com/dp/B0009JKG9M/ref=pe_385040_121528360_TE_dp_9 3 qt rather than 5, but you'll probably want another enameled dutch eventually anyway I'd think.
|
|
# ? Dec 11, 2014 16:33 |
|
Safety Dance posted:How in the world did your wife ruin an enamel dutch oven? That's the one I was leaning toward. She tried to cook something, set the stove on high and walked away. I can't get the burned whatever off the bottom and am assuming the enamel is probably cracked.
|
# ? Dec 11, 2014 18:04 |
|
Safety Dance posted:I'd get this one: Lodge L8DOL3 Pre-Seasoned Cast-Iron Dutch Oven with Dual Handles, 5-Quart I have this and like it quite a bit. It makes bread, beans, and roasts fine while being great for deepfry.
|
# ? Dec 11, 2014 18:16 |
|
Safety Dance posted:How in the world did your wife ruin an enamel dutch oven? I also have this one and I love it. The 5-qt is big enough for pretty much anything you'd want to cook - I had a 3-qt at my previous house (actually the Lodge one with the skillet-lid) and it often wasn't quiiite big enough for what I wanted to cook in it or how much of it I wanted to cook. And despite it not having the handle, I took it camping and it was fine. wormil posted:She tried to cook something, set the stove on high and walked away. I can't get the burned whatever off the bottom and am assuming the enamel is probably cracked. I adopted an old 30's enameled Griswold from my previous house - when I moved in, all the cookware was lovely non-stick stuff that was chipping and rusting like crazy and since I didn't want to cook on it, I dug around and found the Griswold in the way back. No one knew how long it had been there. The cooking surface is mostly blackened (polymerized "seasoning", I think), with a few giant chips in it, with iron visible. Also had a bunch of black poo poo caked on the bottom. Probably the worst condition piece of enamel cookware I've encountered, but it was still better than ingesting Teflon flakes, so I cleaned it up as best I could and I still have it and use it. At one point, my roommate's girlfriend cooked something weird on it at a too-high temp, and the rough black residue it left took ages to get off. On a similar note, my mom banned my sister from cooking tofu (I think it was tofu) on her enameled stuff because it always left this horrible residue. I think with stuff stuck to the enamel, you just have to be patient and scrub conventionally over and over until it comes off (since you can't take a pumice stone or grinder to it like bare cast iron).
|
# ? Dec 11, 2014 21:54 |
|
Authentic You posted:it was still better than ingesting Teflon flakes Teflon is biologically inert. You could eat a big bowl of teflon flakes every day.
|
# ? Dec 11, 2014 21:59 |
|
I think enameled cast iron is fantastic and have a bigass dutch oven that's enameled that I love to use for baking bread, braising poo poo, making stews, etc...but when it comes to actual involved cooking and not just throwing a bunch of poo poo into the dutch oven and tossing it in the oven, give me my naked cast iron pan all day erry day. I think part of it is because I think the enamel is pretty and don't want to risk loving it up, either.
|
# ? Dec 11, 2014 21:59 |
|
Safety Dance posted:Teflon is biologically inert. You could eat a big bowl of teflon flakes every day. So I got curious after making that post and looked it up, and yeah. Apparently it's just the fumes that come off it while you're cooking on it that are cause for concern. And those don't seem to be cancerous (unless you heat it unreasonably high) - they just make you feel sick and can kill your pet birds. I just never had non-stick stuff around when I was growing up - it was all stainless, ceramic, glass, and cast iron because mom was squicked out by cooking with non-stick and plastic, so I just followed suit. My bf and I have a couple non-stick pans (good ones and not rusty flaking ones) that I like just fine.
|
# ? Dec 11, 2014 22:15 |
|
Authentic You posted:I also have this one and I love it. The 5-qt is big enough for pretty much anything you'd want to cook - I had a 3-qt at my previous house (actually the Lodge one with the skillet-lid) and it often wasn't quiiite big enough for what I wanted to cook in it or how much of it I wanted to cook. And despite it not having the handle, I took it camping and it was fine. I have scrubbed and scrubbed but you're right, I just need to keep on scrubbing. I've heard that boiling coca cola will get most of it off but haven't tried that yet. A little voice says that's a good way to get more poo poo stuck on the bottom because of all the sugar. Sometime when I get stuff stuck on the bottom of cast iron I get it really hot and pour tap cold water on it. The shock busts it loose but I hesitate doing this enamel.
|
# ? Dec 11, 2014 23:31 |
|
Something like this might make short work of your problem. http://www.amazon.com/Nylon-Stiff-Drill-Powered-Scrub/dp/B001TR2F9M
|
# ? Dec 11, 2014 23:56 |
|
wormil posted:I have scrubbed and scrubbed but you're right, I just need to keep on scrubbing. I've heard that boiling coca cola will get most of it off but haven't tried that yet. A little voice says that's a good way to get more poo poo stuck on the bottom because of all the sugar. Sometime when I get stuff stuck on the bottom of cast iron I get it really hot and pour tap cold water on it. The shock busts it loose but I hesitate doing this enamel. Cola sounds like a troll. The couple times I've got stuff stuck, I'll either let some vinegar soak in it, or I'll put it on the stove on low with some water and the lid on and leave it for a couple hours. I also read somewhere to treat it like regular cast iron, as in after washing it, heat it back up, wipe it with a touch of oil and then turn the heat off when it just starts to smoke. Haven't had an issue since, and it's been easier to clean too. Especially after spanish rice.
|
# ? Dec 12, 2014 00:06 |
|
|
# ? May 26, 2024 16:45 |
|
Cola has phosphoric acid, I've seen it or kool-aid recommended for metal cleaning for that. Vinegar or barkeepers friend is also acid and has no risk of walking away and scorching your goony soda reduction glaze
|
# ? Dec 12, 2014 03:07 |