|
My brother gave me the HGUC Jagd Doga (my favorite suit from the SNES game SD Gundam X) I had never noticed that the funky face-guard was actually a bird face. The armor plates on the arms and legs can be removed to show a partial internal frame, which is molded in some pretty sleek looking plastic. Posing is limited due to the huge legs and shoulders, but who needs that when you've got so much swag already. and this loving knife Philthy posted:MG MS-06R-1A Zaku II v2.0 Progress on mine so far. I got it back in October and have only been working on it sporadically, but it is easily the most fun kit I've ever built. Tip for the tubes: use a fork or similar metal object to get between the bits and leverage them out of their ruts. I used the handles of a pair of forceps since the rounded edges didn't scratch the plastic.
|
# ? Dec 30, 2014 02:11 |
|
|
# ? May 21, 2024 17:01 |
|
For the rings on the Sinanju I wrapped tape around a kebab skewer until it was thick enough to hold them still so I could clean them up. Then I bought metal parts cos gently caress me.
|
# ? Dec 30, 2014 04:34 |
|
poo poo I did not expect for Christmas: The January 2015 issue of Dengeki Hobby that comes with the 1/48 scale Build Burning head display stand. It's molded entirely in white, though. Gonna have to wait until money is better so I can paint it up all nice-like.
|
# ? Dec 30, 2014 10:10 |
|
So, here's a Christmas gift I got for myself, courtesy of Amazon.com having it for 60% off: Dino Getter 1, complete with my modified Getter Tomahawk. For 83 dollars shipped, it's a great figure.
|
# ? Dec 30, 2014 10:46 |
|
I bought a backlog! HLJ Black Friday stuff, wasn't expecting them yet. BizarroAzrael fucked around with this message at 12:53 on Dec 30, 2014 |
# ? Dec 30, 2014 12:33 |
|
Speaking of backlogs, my HGs of Nu, Zeta and Wing arrived. Now I need to decide which to start with.
|
# ? Dec 30, 2014 12:33 |
|
So I started my MG Sazabi ver. Ka last night and holy poo poo, I think my old PG Zeta had less trees. What's more, the stickers go straight up to 150, so I'm going to be doing a fair amount of painting, I'm sure. I've already had to paint the grooves in the shoulder armor, plus the usual head pieces with the mono-eye and sensor. What's weird is that the psycoframe is a prop, there's actually no cockpit inside the figure. Structurally it makes sense, but it's still a weird decision.
|
# ? Dec 30, 2014 15:03 |
|
The Muffinlord posted:So I started my MG Sazabi ver. Ka last night and holy poo poo, I think my old PG Zeta had less trees. What's more, the stickers go straight up to 150, so I'm going to be doing a fair amount of painting, I'm sure. I've already had to paint the grooves in the shoulder armor, plus the usual head pieces with the mono-eye and sensor. Yeah I got one for myself for Christmas, I'm taking a break after finishing the waist/skirt parts. That large rear part had me very nervous because of how hollow it was, I didn't want to apply too much pressure. It's a big beautiful beast though I love it.
|
# ? Dec 30, 2014 15:12 |
|
There is a cockpit, but it's separate from the main body. They had to free up space for a LED somehow.
|
# ? Dec 30, 2014 15:12 |
|
Hijo Del Helmsley posted:Speaking of backlogs, my HGs of Nu, Zeta and Wing arrived. Let me know how the HG Zeta is since I've been eyeballing a 1/144 scale Zeta for a while but I heard the RG sucks. Oh and I finished my Gouf Custom I am genuinely surprised that the chaingun doesn't appear to add any weight issues. Now let's go hunt some Guntanks. Unpopular opinion time: I think Norris Packard is the better Gouf pilot than Ramba Ral.
|
# ? Dec 30, 2014 16:46 |
|
BlitzBlast posted:There is a cockpit, but it's separate from the main body. They had to free up space for a LED somehow. Well, yeah, that's what I meant. There's no space for the cockpit without sacrificing something else, so they made it a prop.
|
# ? Dec 30, 2014 17:12 |
|
Kaiju Cage Match posted:Let me know how the HG Zeta is since I've been eyeballing a 1/144 scale Zeta for a while but I heard the RG sucks. The gouf custom scenes in 08th ms team were amazing. I also built this kit pretty early on in my collection. The minigun does add weight but you can pose the legs or lift the gun slightly to compensate. I had it posed badly and on a high shelf, over a few days it sagged and fell down.
|
# ? Dec 30, 2014 17:19 |
|
Anyone else have trouble getting the forearm armor onto the arms of the RG Wing Zero Custom? Bastards just won't slide up the arm frame all the way for me.
|
# ? Dec 30, 2014 17:29 |
|
These beauties just came in today: e: holy poo poo, imgur didn't resize that at all e2: Resized and rehosted Kibner fucked around with this message at 18:38 on Dec 30, 2014 |
# ? Dec 30, 2014 18:33 |
|
Zeon amphibious suit fetish.
|
# ? Dec 30, 2014 19:25 |
|
I got a RX-160S Byarlant Custom from a local shop, and it's awesome. Here's some cellphone pics of it: I love it's awesome little claw hands. I might get some paint for it and my g-self and nu gundams (they're coming in the mail atm).
|
# ? Dec 30, 2014 19:28 |
|
Kibner posted:These beauties just came in today: good picks
|
# ? Dec 30, 2014 20:34 |
|
Ka0 posted:Zeon amphibious suit fetish. You have no idea. I also have an Acguy, Gold Acguy, MG Acguy, Z'Gok, Gogg, and Clear Juaggu,
|
# ? Dec 30, 2014 20:45 |
|
Kaiju Cage Match posted:Let me know how the HG Zeta is since I've been eyeballing a 1/144 scale Zeta for a while but I heard the RG sucks. It's SOLID. The joints will not move unless you put significant force into it. Which is a good thing if you wanna pose it. Except for one part. The gun. It's an old HG, so it doesn't have the slot to clip the gun into, and it's grip is REALLY loose. I'm just giving it the beam sword instead, because the gun won't even point straight. But the actual body itself is amazing. Solid joints, good balance, even with the huge backpack, colours are super vibrant. Not tried transforming it yet though.
|
# ? Dec 30, 2014 22:07 |
|
Transforming it is easy since it's a partsformer. Biggest issue with HG Zeta are the proportions. Other then that, it's probably the most solid "modern" Zeta kit around since it's not a transforming kit.
|
# ? Dec 30, 2014 22:29 |
|
Figuring out how to best set up the Rynex transformation until I can grab the rest of ther parts I need. lead to a really funny looking thing. Really need to wash that bazooka at some point so I can paint it. I've had that for literally 16 years, it's looking really bad.
|
# ? Dec 30, 2014 22:54 |
|
Finally got the Throne Zwei done. Behold, my first three HGs.
|
# ? Dec 30, 2014 22:59 |
|
Kibner posted:You have no idea. I also have an Acguy, Gold Acguy, MG Acguy, Z'Gok, Gogg, and Clear Juaggu, You and Sharkopath are going to be best friends.
|
# ? Dec 30, 2014 23:09 |
|
Warmachine posted:You and Sharkopath are going to be best friends. I almost bought the 7-11 and GFT Acguys while I was on vacation in Japan last month (first international trip ever). I really didn't like the paint schemes on them, though. I really, really like Acguy. >_>
|
# ? Dec 31, 2014 01:05 |
|
Warmachine posted:You and Sharkopath are going to be best friends. The second they announce an mg hygogg or capule is the second I get an airbrush and compressor and nobody sees me ever again.
|
# ? Dec 31, 2014 01:24 |
|
So apparently this amazing thing came out 4 years ago for $40, bombed, and now can't be found for less than $180.
|
# ? Dec 31, 2014 02:07 |
|
Do any of the Tierens come with commander variant pieces? Because I wouldn't mind putting together one of Sergei's S1 machines.
|
# ? Dec 31, 2014 02:15 |
|
Warmachine posted:You and Sharkopath are going to be best friends. I want to be their friend too. And am also wondering why they didn't get a NG Kapool yet. Sharkopath posted:The second they announce an mg hygogg or capule is the second I get an airbrush and compressor and nobody sees me ever again. Hell, just give me a proper HG Kapool and I'll buy at least a half dozen.
|
# ? Dec 31, 2014 02:35 |
|
Sharkopath posted:The second they announce an mg hygogg or capule is the second I get an airbrush and compressor and nobody sees me ever again. I am kind of surprised that the Capule hasn't seen any release at all since the NG one so long ago. Same with the Leo, though they finally relented with the RD a couple of years back.
|
# ? Dec 31, 2014 03:57 |
|
Warmachine posted:You and Sharkopath are going to be best friends. He can be my friend too, Juaggus >>>>>>>>>> any seed gundam.
|
# ? Dec 31, 2014 04:37 |
|
Installing a new CPU cooler, lost one of the plastic bits that attaches the fan to the heatsink. "Gee, what's something of similar size and rubbery-ness?" Gundam to the rescue! ScottyWired fucked around with this message at 05:02 on Dec 31, 2014 |
# ? Dec 31, 2014 04:42 |
|
ScottyWired posted:Installing a new CPU cooler, lost one of the plastic bits that attaches the fan to the heatsink. "Gee, what's something of similar size and rubbery-ness?" Char's Custom overclock, three times the bus speed.
|
# ? Dec 31, 2014 06:16 |
|
You spoiled little brat.
|
# ? Dec 31, 2014 07:40 |
|
Well I worked out why I couldn't get the forearm armor on my RG WZC to just slide on. Turns out they're really scary click-in jobs.
|
# ? Dec 31, 2014 11:55 |
|
Wing Gundam might be my new favourite HG. Just a really nice little kit, everything fits together perfectly, all the joints are great, really vivid colours. It'd be perfect as a first gunpla too, because it's fairly low parts count.
|
# ? Dec 31, 2014 14:04 |
|
Hijo Del Helmsley posted:Wing Gundam might be my new favourite HG. Just a really nice little kit, everything fits together perfectly, all the joints are great, really vivid colours. Speaking of that, I opened up my Zock kit just to take a look and it's probably not a good beginner's kit. It has six runners. Most of my other HG kits only have four. That thing has a lot of parts. I'll probably build it after I finish my MG Acguy.
|
# ? Dec 31, 2014 15:02 |
|
Doesn't look that bad, lot of big pieces and internal frame. Plus the build instructions are only 3 pages. dalong.net I found is very useful for checking out manuals and runners ahead of time.
|
# ? Dec 31, 2014 16:40 |
Hello backlog, my old friend I've come to speak with you again (doesn't show the MG QUEL that I've got parts cut for and am awaiting New Year's to die down so I can begin priming/preshading/painting)
|
|
# ? Dec 31, 2014 16:50 |
|
OK I got Musha Gundam MG Strike Noir MG Sengoku Astray MG AGE-1 Razor Build Strike Full Package Gundam Airmaster Exia Repair HG Someone pick my next Mobile Suit Goddamn
|
# ? Dec 31, 2014 17:42 |
|
|
# ? May 21, 2024 17:01 |
|
If you don't have a MG Gundam X, you should get one!!! Also you may as well pick up MG Build mkII.
|
# ? Dec 31, 2014 17:45 |