|
Wade Wilson posted:The manufacturer's page gives a print range of 15mm-30mm for T-Glase, so I started off slow until I've got a few prints done. This isn't PLA or ABS, man. Oh... Woops! You can print t-glase faster but you lose a lot of the optical clarity properties. kitten smoothie posted:What is special about PET+ in general? I saw Micro Center started carrying it. It has more of the structural properties people like from abs without all the annoying warping
|
# ? Apr 26, 2015 15:54 |
|
|
# ? May 9, 2024 01:01 |
|
MickRaider posted:It has more of the structural properties people like from abs without all the annoying warping Without the ABS-esque warping does this also mean that the shrinkage characteristics will be closer to what you get from PLA?
|
# ? Apr 26, 2015 19:09 |
|
kitten smoothie posted:Without the ABS-esque warping does this also mean that the shrinkage characteristics will be closer to what you get from PLA? Supposed to print similar to PLA (at ABS temperatures), but be a water-phobic material that won't absorb moisture. MadeSolid's version of the material claims to have Zero warping, No fumes, PLA-like adhesion to print surfaces. MatterHackers has a write-up about where they sell it here. https://www.matterhackers.com/store/3d-printer-filament/black-pet-175mm There are other colors, that's just the first page I found.
|
# ? Apr 26, 2015 22:24 |
|
Okay, so this Tower of Pi thing just does not want to print in T-Glase. It'll get the base down, but then the filament keeps separating inside the extruder and the printer just runs around in the air for a while until I notice that it's not printing and cancel the print. I've got some Pi coasters, but the full tower just isn't happening. I've printed three goofy little vase prints with this material no problem, but they're relatively quick prints that only take about an hour (small objects). Anybody here have any ideas? I'm thinking when my PET+ comes in I'll just switch materials and make it out of that, but it would've been neat to have a transparent one. EDIT: Okay, I'm officially a fan of MadeSolid materials, they put the recommended temps and speeds right on the label on the spool. Some Pinko Commie fucked around with this message at 01:33 on Apr 28, 2015 |
# ? Apr 27, 2015 15:51 |
|
Has anyone here ever worked with nylon? I'm looking for some nylon filament for printing bushings. Is there a particularly good brand of filament for that? I saw Taulman 3D's "Bridge" nylon, which they claim is easy to work with, but I'm concerned over whether it would have the same low friction of standard nylon.
|
# ? Apr 29, 2015 03:05 |
|
Cockmaster posted:Has anyone here ever worked with nylon? I'm looking for some nylon filament for printing bushings. Is there a particularly good brand of filament for that? I've printed a lot of nylon, and I hate it. poo poo loves to warp, even bridge. Bridge is cheap, and nylon-y, but not particularly awesome. It's focus is bringing the cost down and little more. I've heard good things about the new 910 that just came out...
|
# ? Apr 29, 2015 03:58 |
|
Cockmaster posted:Has anyone here ever worked with nylon? I'm looking for some nylon filament for printing bushings. Is there a particularly good brand of filament for that? What are you actually trying to do? I'd think for bushings something like PET+ would be better for actual usage (low warp, moisture-phobic, stronger, etc.)
|
# ? Apr 29, 2015 20:41 |
|
Wade Wilson posted:What are you actually trying to do? I'd think for bushings something like PET+ would be better for actual usage (low warp, moisture-phobic, stronger, etc.) Except PET is super sticky vs. Nylon...
|
# ? Apr 29, 2015 20:44 |
|
insta posted:Except PET is super sticky vs. Nylon... There is always good old ABS, or the ABS variants, with a post-print sanding/smoothing/wipe-down with something to smooth it up.
|
# ? Apr 29, 2015 20:54 |
|
Wade Wilson posted:There is always good old ABS, or the ABS variants, with a post-print sanding/smoothing/wipe-down with something to smooth it up. Except ABS is also sticky in any kind of bushing scenario ... it wears very quickly against sliding or rotating parts.
|
# ? Apr 29, 2015 21:12 |
Someone figure out how to print UHMW, tia.
|
|
# ? Apr 29, 2015 21:20 |
|
It's expensive (£30/250g) but igus sells 2 bearing filaments, one hard, one flexible. I've only seen it on their website though, I don't have a printer.
|
# ? Apr 29, 2015 21:34 |
|
Cakefool posted:It's expensive (£30/250g) but igus sells 2 bearing filaments, one hard, one flexible. eh to be fair if you need more than 250g of bearing surface you probably don't want to be 3d printing it anymore.
|
# ? Apr 29, 2015 21:49 |
|
That's a good point I hadn't really thought of. At that price maybe a good candidate for a dual head job, print the bare minimum bearing sleeve in $texas and the rest in ABS.
|
# ? Apr 29, 2015 22:33 |
|
Along the same lines, are you able to find a cheap nylon insert that you can press/insert/diligently mash into an ABS piece that will work for your application?
|
# ? Apr 29, 2015 23:27 |
|
Cakefool posted:That's a good point I hadn't really thought of. At that price maybe a good candidate for a dual head job, print the bare minimum bearing sleeve in $texas and the rest in ABS. Yeah, I have a Makergear M2 with the new dual V4 extruder (which is supposed to work with nylon and polycarbonate). torpedan posted:Along the same lines, are you able to find a cheap nylon insert that you can press/insert/diligently mash into an ABS piece that will work for your application? The idea here is to be able to have any size bushing I need without having to track it down and wait for it to be shipped.
|
# ? Apr 30, 2015 00:44 |
Just buy a home next door to McMaster-Carr HQ. Heaven knows that's what *I* would do.
|
|
# ? Apr 30, 2015 00:45 |
|
Bad Munki posted:Just buy a home next door to McMaster-Carr HQ. Heaven knows that's what *I* would do. McMaster-Carr is the best thing ever for this kind of stuff, really. Especially with the 3d part files that you can save and convert to STL files for the stuff you don't want to buy outright.
|
# ? Apr 30, 2015 01:06 |
|
Hey guys. I'm looking to get started prototyping parts for a project I'm working on but don't have a ton of money to get started. What's a good printer to look into? MakerBot is like $1400 which seems crazy to me.
|
# ? Apr 30, 2015 15:03 |
|
BiohazrD posted:Hey guys. I'm looking to get started prototyping parts for a project I'm working on but don't have a ton of money to get started. What's a good printer to look into? MakerBot is like $1400 which seems crazy to me. A print service like 3dhubs / makexyz. Shop around, find someone with good ratings and reviews, pay their prices without complaining, never deal with the loving TWO PRINTS THAT FAILED OVERNIGHT BECAUSE I HATE YOU YOU STUPID PIECE OF poo poo PRINTERS.
|
# ? Apr 30, 2015 15:54 |
|
I just did a 58 hour print. Surprisingly, turning off Makerbots automatic jam detection does wonders.
|
# ? Apr 30, 2015 18:08 |
|
BiohazrD posted:Hey guys. I'm looking to get started prototyping parts for a project I'm working on but don't have a ton of money to get started. What's a good printer to look into? MakerBot is like $1400 which seems crazy to me. Also, look into a local makerspace, there are these Co-op mad science/lab/woodshop places you can go to that have 10k+ in gear you can use when you need to for a low low monthly fee. Mine has all kinds of crap, is like $60/month, and is really handy when I need to CNC router a hull size sheet of plywood.
|
# ? Apr 30, 2015 19:06 |
|
My local hackerspace is twice that
|
# ? Apr 30, 2015 19:49 |
|
gently caress, my local place just bumped up to $250/month full time.
|
# ? Apr 30, 2015 19:54 |
|
Fayez Butts posted:gently caress, my local place just bumped up to $250/month full time. That's the 'show up and take your poo poo when you're done' student version. Full price with storage and project space is like 200ish a month.
|
# ? Apr 30, 2015 20:02 |
|
I live in the middle of loving nowhere Virginia, so unfortunately that seems like a long shot.
|
# ? Apr 30, 2015 20:07 |
|
Methylethylaldehyde posted:That's the 'show up and take your poo poo when you're done' student version. Full price with storage and project space is like 200ish a month. I don't get storage or a workspace. Everything is shared, but I can kind of dump stuff at the back of the wood shop for a day or two if I need.
|
# ? Apr 30, 2015 20:09 |
|
gently caress, even the TechShop near me is only $125/month. Sound cheap compared to some of your maker spaces. And TechShop has welders and mills and a loving Flow waterjet cutter.
|
# ? May 1, 2015 04:26 |
Heavily considering a Lulzbot Taz 5, anybody ever try one out in person? I've seen countless videos on it so far and it seems to be a great printer with a decent build volume. I wish there were more 3D printers around the same price that had easier times printing 1:1 scale wearable stuff (armor/helmets/etc)
|
|
# ? May 1, 2015 05:11 |
|
Look at James Bruton on Youtube. good poo poo with the lulzbots
|
# ? May 1, 2015 13:29 |
|
Lulzbots are my dream printers (once I get my UM2) But drat they command a high price
|
# ? May 1, 2015 15:18 |
|
Fayez Butts posted:gently caress, my local place just bumped up to $250/month full time. Holy balls, we're £10 a month ($17)
|
# ? May 1, 2015 15:32 |
|
IndianaZoidberg posted:gently caress, even the TechShop near me is only $125/month. Sound cheap compared to some of your maker spaces. And TechShop has welders and mills and a loving Flow waterjet cutter. I was so totally blown away by the TechShop in SF when I stopped in there for a party not long ago. TechShop has just acquired a lot here in St Louis and plans to build a facility opening summer 2016, and I'm like a 5 year old kid looking forward to next Christmas.
|
# ? May 1, 2015 15:49 |
|
MickRaider posted:Lulzbots are my dream printers (once I get my UM2) Skip UM2 go straight to Lulzbot
|
# ? May 1, 2015 16:10 |
|
Sure, though right now I have access to 4 printers. Really don't need anymore. Nor do I anticipate having the money to buy either.
|
# ? May 1, 2015 16:46 |
|
Apparently the makers of the Robo 3D R1 showed off some printer capable of printing a cubic meter on it's print capacity. But they want $10,000 for it.
|
# ? May 1, 2015 17:56 |
|
That's pretty on par with other huge printers. Not sure why anyone would need that much volume though
|
# ? May 1, 2015 19:47 |
|
MickRaider posted:That's pretty on par with other huge printers. Not sure why anyone would need that much volume though Because you can't find a better way to use 70 pounds of filament in one go?
|
# ? May 1, 2015 21:02 |
|
insta posted:Because you can't find a better way to use 700 kilograms of filament in one go? There, I made you slightly more accurate.
|
# ? May 1, 2015 21:38 |
|
|
# ? May 9, 2024 01:01 |
|
I'm interested in 3D printing, but I don't think I can justify the expense. If I wanted to get someone to make some stuff for me, what can I expect to pay?
|
# ? May 2, 2015 00:12 |