|
SiGmA_X posted:Was your drain glued on to the AC evaporator housing? Nothing was glued, it was just a T joint going from the pan with a vent up top and a drain in the bottom, when clogged it was leaking out the vent at the top.
|
# ? Jul 7, 2016 23:09 |
|
|
# ? May 16, 2024 18:29 |
|
VendaGoat posted:Like I said, he needs a new canuter valve. Ok I'll mention this again - canuter valve = snipe hunt, correct? I.e. you're giving joke advice? I didn't think that was a real thing. And it definitely appears to be A/C related so service call time, come on baby free replacement of my 30 year old a/c unit Even if I could track down the pan or the pipe or whatever is having the blockage/overflow I'd rather roll the dice on a replacement unit with this warranty. Thank god I bought a shop vac a literal week ago to clean up all the black oil sunflower seed shells that the birds were throwing everywhere, it's handled this water way better than a mop.
|
# ? Jul 7, 2016 23:49 |
|
mastershakeman posted:Ok I'll mention this again - canuter valve = snipe hunt, correct? I.e. you're giving joke advice? I didn't think that was a real thing. Correct. The first reply to you about the cooling unit inside your duct work was the honest advice. To burst your bubble further. It's probably just a clogged drain, which they will blow out, like the above poster said and everything will be fine again. If it's still blowing cold air, it's functioning properly. Edit: for clarity's sake.
|
# ? Jul 7, 2016 23:51 |
|
They're gonna clean out your drain, they're not gonna replace your unit. Nice try though. I did get a new evap coil (not a new unit) out of my home warranty, but that was only after three visits to refill the coolant.
|
# ? Jul 7, 2016 23:53 |
|
It's been mentioned but maybe should be repeated. A water leak is a plumbing issue, not an hvac issue. If the unit cools, it's working. Condensation is a normal part of the process. The harder the unit is working the more water will need to drain, so if a drain isn't working correctly the issue will rear its head when the ac is going the longest/hardest.
|
# ? Jul 8, 2016 00:19 |
|
Our washing machine died and we need a new one. What do you homeowners recommend? We don't want to spend more than $500 on one. All the ones I've own in the past have had agitators in the middle, and it's getting harder and harder to find ones with that. A lot of them are high efficiency which from what I've read online means uses less water, and reviews say that their clothes aren't getting as clean because of that. We don't want to buy the wrong washing machine, so I'm looking for opinions here.
|
# ? Jul 8, 2016 01:03 |
|
I bought an LG frontloader 4 months ago, model WM3570HWA, and I like it a lot... currently going for $700 though. It definitely gets my clothes clean. There are extra-dirt cycles, and extra rinse cycles, seriously it's been great so far.
|
# ? Jul 8, 2016 01:07 |
|
A basic HE frontloader works fine. I've had mine for like 8 years? It's a Kenmore model 417.something. Top loaders with agitators tear up your clothes more and have lower capacities, and you can't shove big blankets in there.
|
# ? Jul 8, 2016 01:17 |
|
Garage door opener finally gave up the ghost. Thankfully it's not a huge outlay like "roof needs replacin'" but still, not fun money to spend.
|
# ? Jul 8, 2016 01:25 |
|
^^That sucks man... I'd sell you the spare one my girlfriend picked up when the sears near us was going under, but I'm sure it would cost more to ship the dang thing than it's worth. At least it's not a snowballing expense, like replacing a window. Re: Washers--my parents switched to a high efficiency front loader and have had nothing but problems with it, the latest being the gasket seal around the door leaking and draining water everywhere upstairs. Sample size of one and I'm sure there are better units out there, but I'm happy with the basic 300$ top loader I picked up from the ding and dent appliance store (appliance smart I think?). Found an ancient postcard in my walls with the inspection camera while I was trying to figure out the obstruction stopping me from running new wiring up to the attic. I'd love to pull it out and take a look at it, but I don't think there's any way I can do so without drilling a sizeable hole in the wall. Kind of makes me wonder what other poo poo is lurking in there... When I first starting fixing stuff around the house, I found an old trolley token behind the medicine cabinet, which is crazy since there hasn't been streetcar service around here for almost eighty years. Kind of feels like an archaeological expedition, except the only mummies are my lungs after being exposed to asbestos and lead paint
|
# ? Jul 8, 2016 03:43 |
|
OSU_Matthew posted:drilling a sizeable hole in the wall
|
# ? Jul 8, 2016 04:07 |
|
Why on earth would someone put a washing machine on an upper floor
|
# ? Jul 8, 2016 04:31 |
|
Higgy posted:Garage door opener finally gave up the ghost. Thankfully it's not a huge outlay like "roof needs replacin'" but still, not fun money to spend. slap me silly posted:It is your duty. Post pics
|
# ? Jul 8, 2016 04:34 |
|
Skepticism of front-loader washers seems to be a North American thing, so I assume we're wrong, but the only experience I've had was a bad one. My old apartment came with a brand-new Frigidaire front-loader that promptly developed a mold problem in the gasket that no amount of bleach could fix. Replaced the gasket, was super careful about letting it dry out, same problem. The lesson there might be "buy a washer from a brand known for making washers," but also, look out for mold complaints.
|
# ? Jul 8, 2016 05:48 |
|
for what it's worth my front-loading washing machine has been nothing but wonderful
|
# ? Jul 8, 2016 08:52 |
|
I'll give a vote for front loading. I've had mine for 5 years, Kenmore, high efficiency, cost about 500. No problems, cleans well, never had a leak, and no mold.
|
# ? Jul 8, 2016 11:51 |
|
QuarkJets posted:Why on earth would someone put a washing machine on an upper floor Most laundry is "generated" in the bedrooms. Changing clothes, sheets, bath towels, etc. Putting the machine upstairs means you don't have to carry laundry up and down every time you do the wash. Of course, if you have a leak, it can be a big problem if the room isn't designed well. If I ever were to have a unit on the second floor, I'd definitely think about putting in a floor drain in case you ever had a break.
|
# ? Jul 8, 2016 11:57 |
|
LogisticEarth posted:Most laundry is "generated" in the bedrooms. Changing clothes, sheets, bath towels, etc. Putting the machine upstairs means you don't have to carry laundry up and down every time you do the wash. Yep. Our washer sits on a shallow tub that has a floor drain. We love our laundry room being beside our bedroom.
|
# ? Jul 8, 2016 12:29 |
|
LogisticEarth posted:Most laundry is "generated" in the bedrooms. Changing clothes, sheets, bath towels, etc. Putting the machine upstairs means you don't have to carry laundry up and down every time you do the wash. I used to live with a 2nd floor front-loading washer and it was loud as gently caress, the vibration could be heard everywhere in the house. Apparently most of the manufacturers recommend against putting one on the second floor for this reason. In our current house, I'm happy having to walk up and down one flight of stairs instead of dealing with that. Second floor plumbing is also often a shitshow so I'm also happy to minimize those risks
|
# ? Jul 8, 2016 12:54 |
|
We went to the zoning board of appeals yesterday, deck is good to go. I could have killed my gc though - he kept talking and his phone rang during the meeting, and he didn't seem prepared, and I was, so I just did the appeal myself. The deck was too close to the rear setback to extend it without appealing to the zba. They need you to list a hardship so I spun some bullshit about how the deck was too small. Cue tiny deck jokes!
|
# ? Jul 8, 2016 14:38 |
|
americanzero4128 posted:Our washing machine died and we need a new one. What do you homeowners recommend? We don't want to spend more than $500 on one.
|
# ? Jul 8, 2016 15:19 |
|
americanzero4128 posted:Our washing machine died and we need a new one. What do you homeowners recommend? We don't want to spend more than $500 on one. All the ones I've own in the past have had agitators in the middle, and it's getting harder and harder to find ones with that. A lot of them are high efficiency which from what I've read online means uses less water, and reviews say that their clothes aren't getting as clean because of that. We don't want to buy the wrong washing machine, so I'm looking for opinions here.
|
# ? Jul 8, 2016 15:53 |
|
americanzero4128 posted:Our washing machine died and we need a new one. What do you homeowners recommend? We don't want to spend more than $500 on one. All the ones I've own in the past have had agitators in the middle, and it's getting harder and harder to find ones with that. A lot of them are high efficiency which from what I've read online means uses less water, and reviews say that their clothes aren't getting as clean because of that. We don't want to buy the wrong washing machine, so I'm looking for opinions here. http://m.thesweethome.com/reviews/the-best-washer-and-dryer/ You'll find agitators on the crappiest low end washers now. Everything is going HE, any modern HE washer will clean just fine. LG and Samsung seem to be best bang for the buck right now on the low and mid range. Also check out best buy and home improvement stores for unused floor model deals. We got our set from best buy during a model changeover for a couple hundred off each.
|
# ? Jul 8, 2016 16:25 |
|
My parents have had a front-loading washer forever and never had issues, I don't think there is any particular problem with them except you can't interrupt the wash cycle without flooding your room. LogisticEarth posted:Of course, if you have a leak, it can be a big problem if the room isn't designed well. If I ever were to have a unit on the second floor, I'd definitely think about putting in a floor drain in case you ever had a break.
|
# ? Jul 8, 2016 16:50 |
|
Ashcans posted:My parents have had a front-loading washer forever and never had issues, I don't think there is any particular problem with them except you can't interrupt the wash cycle without flooding your room. I can definitely interrupt the wash cycle of mine without flooding my room. HE washers shouldn't be using enough water to flow out of the washer when you interrupt them.
|
# ? Jul 8, 2016 16:57 |
|
Rurutia posted:I can definitely interrupt the wash cycle of mine without flooding my room. HE washers shouldn't be using enough water to flow out of the washer when you interrupt them. Depends entirely on the size of the door relative to the washer drum. I have a pair of small Blomberg machines that fit under a standard height countertop, as they are in the kitchen. The washer door is pretty much just as big as the drum. There's really no way to not have at least a bit water spill out if you had to stop it. Then again, I've never had to do so yet so maybe there's some feature I'm missing.
|
# ? Jul 8, 2016 17:59 |
|
QuarkJets posted:I used to live with a 2nd floor front-loading washer and it was loud as gently caress, the vibration could be heard everywhere in the house. Apparently most of the manufacturers recommend against putting one on the second floor for this reason. I have a front load washer on my first floor, over basement space. No noise or vibration complaints, it's usually less noisy than most top loaders I've used.
|
# ? Jul 8, 2016 18:47 |
|
Zhentar posted:I have a front load washer on my first floor, over basement space. No noise or vibration complaints, it's usually less noisy than most top loaders I've used. Yeah mine doesn't really vibrate much at all. But in any case, I think it's perfectly fair to not want an upper level washer but, QuarkJets, your question was why anyone would prefer it.
|
# ? Jul 8, 2016 18:50 |
|
VendaGoat posted:Correct. Unsurprisingly, you're exactly right. Cost me $90 to find out what to unplug and where to blow and whatnot, but it's solved for a short time. What I really need is a less than 35 year old A/C unit and less than 25 year old furnace, apparently there's something called a condenser unit that would be good to have? One of a million purchases to make at some point.
|
# ? Jul 8, 2016 19:26 |
|
Zhentar posted:I have a front load washer on my first floor, over basement space. No noise or vibration complaints, it's usually less noisy than most top loaders I've used. Mine too, but then there are a million people on the internet complaining about their 2nd floor front-loading washers so it's apparently a real common issue, as it was for me a long time ago. I don't know if there's any difference between a floor over basement space vs a second story floor Rurutia posted:Yeah mine doesn't really vibrate much at all. I was being facetious and implying that the advantage of having a washer right next to your upstairs bedroom was not worth the extra heartache and expense associated with upstairs washers
|
# ? Jul 8, 2016 19:29 |
|
gvibes posted:Go to Abt, the greatest appliance store on the planet (I think you're in Chicago). Buy a whatever, they're all fine. Yeah, the southwest suburbs. Thanks, I'll check out ABT. Thanks everyone else for the recommendations. I think we're going to stay away with a front loader because I've heard a lot of reports of mold in the door seal.
|
# ? Jul 8, 2016 21:23 |
|
QuarkJets posted:I was being facetious and implying that the advantage of having a washer right next to your upstairs bedroom was not worth the extra heartache and expense associated with upstairs washers That's fine but did you expect no one to disagree with you?
|
# ? Jul 8, 2016 21:28 |
|
Rurutia posted:I can definitely interrupt the wash cycle of mine without flooding my room. HE washers shouldn't be using enough water to flow out of the washer when you interrupt them. I doubt their machine was HE. I remember watching it run and during parts of the cycle it would fill up so the waterline was at least halfway up the door. If you wanted to stop it you bumped it to the end so it drained before you opened the door. I am not surprised if new washers are better!
|
# ? Jul 8, 2016 22:20 |
|
Rurutia posted:That's fine but did you expect no one to disagree with you? No, I'm just explaining what a rhetorical question is.
|
# ? Jul 8, 2016 22:37 |
|
OSU_Matthew posted:^^That sucks man... I'd sell you the spare one my girlfriend picked up when the sears near us was going under, but I'm sure it would cost more to ship the dang thing than it's worth. At least it's not a snowballing expense, like replacing a window. Oh yes, glad the windows are at least recent. The garage door opener, I think, is probably far past it's life expectancy and problems were noted in the original inspection but "hey it works now and it's still working a year later, we'll just deal with it when the times comes!" SiGmA_X posted:Are you going to convert to a LiftMaster 8500? GJ highly recommends them. What is this wizardry. You've just blown my mind.
|
# ? Jul 9, 2016 07:03 |
|
What is the typical life expectancy of a garage owner? I have a craftsman from '91 that's still chugging along. It sounds like the whole house is being thrown in a blender but it works.
|
# ? Jul 9, 2016 09:20 |
|
Jealous Cow posted:What is the typical life expectancy of a garage owner? Depends whether you maintain the door springs yourself or hire it out.
|
# ? Jul 9, 2016 15:18 |
|
Jealous Cow posted:What is the typical life expectancy of a garage owner? I have a craftsman from '91 that's still chugging along. Mine is about the same age and also craftsman and it still seems like it's brand new.
|
# ? Jul 9, 2016 15:29 |
|
FWIW the previous owners clearly did zero servicing of the unit and and it was poorly installed to begin with. I did my best for the past year to keep it going but here we are. Going to be looking around to see what's at the
|
# ? Jul 9, 2016 19:53 |
|
|
# ? May 16, 2024 18:29 |
|
slap me silly posted:Depends whether you maintain the door springs yourself or hire it out.
|
# ? Jul 9, 2016 20:41 |