|
Man I swapped over to Griots best of show wax and . It is a right motherfucker to get off though.
|
# ? Jul 31, 2016 13:21 |
|
|
# ? May 26, 2024 08:22 |
|
Digital_Jesus posted:Man I swapped over to Griots best of show wax and . Use some form of quick detailer after your first buffing. Gets it off pretty quick and easy and you're right, the finish is absolutely I've never been a big believer in wax making some huge change in the appearance of a car but the difference was absolutely noticeable on my s2k. The paint looks way deeper and it loving pops.
|
# ? Jul 31, 2016 13:42 |
|
I *was* using quickdetailer (which btw owns because Griots quick detailer smells like Sprees). Though I also did their recommended put on two coats and let it dry for 24hrs thing.
|
# ? Jul 31, 2016 13:52 |
|
meatpimp posted:Ahem. I think I had that covered in the op: Haha. The double was $99 shipped and what was in stock. While this literally had me pacing around the car, waiting for it to burst into flames I am happy to report it worked wonderfully. I did two treatments and 90% of the mold smell is gone. I need to do one more, just to knock the final hint of mustiness out, but it's amazing how well it worked. RIP PAUL WALKER came by and we shocked his Passat, it had no problem removing the smoke/mold/musty odor/sweet stench after three (15-20min) treatments. I'm sold. I'm going to try it on one of our outbuildings next to see if it can removed the mouse-smell.
|
# ? Jul 31, 2016 18:47 |
|
the spyder posted:Haha. The double was $99 shipped and what was in stock. While this literally had me pacing around the car, waiting for it to burst into flames I am happy to report it worked wonderfully. I did two treatments and 90% of the mold smell is gone. I need to do one more, just to knock the final hint of mustiness out, but it's amazing how well it worked. RIP PAUL WALKER came by and we shocked his Passat, it had no problem removing the smoke/mold/musty odor/sweet stench after three (15-20min) treatments. Good deal. I'm glad it's working for you. I w was surprised by how good a job it did, then I wanted to Ozone everything. The single made a big difference in my bedroom (~325ft*2 with ceiling vaulted to 15') when we were keeping the dog in there when we went away. He had separation anxiety and made one hell of a stink. 40 minutes with the ozone generator and all traces were gone. Pretty amazing stuff. I'm sure with a double unit you'll be able to do even more. I find myself going into musty buildings (several churches and Buckeye Gymnastics, home of Gabby Douglas) and marveling at the stink... then thinking "all you need to do is get some ozone generators and your building will not smell like rank old rear end."
|
# ? Jul 31, 2016 19:47 |
|
I had my first foray into polishing this weekend on my single stage red 95 and it as all going well until I cut too far on the rear panel. Is this something I can try to touch up myself or should I take it to a paint/body shop? You can see where I went too far on the top edge, around the key hole, and right smack dab in the middle of the panel. I guess I should have waited until I had a smaller pad. 6" was definitely too big for this, at least for me. I was using the Griot's Garage 6" da polisher with the orange cutting pad and Meguiar's M105 compound on speed 5. The panels I didn't gently caress up I follow up with M205 and a coat of wax. They look great.
|
# ? Aug 1, 2016 13:42 |
|
Should have used Ultimate Compound.
|
# ? Aug 1, 2016 16:03 |
|
Phone posted:Should have used Ultimate Compound. I honestly didn't see a lot of difference in result between using just UC and M105 first... willroc7, I can't see much from your picture, but if you're through to red primer, that's pretty much end game. You either live with it or respray. The nice thing is that panel comes off easily and red is an easy color to match. I did that on my black single-stage Miata on the left rear corner of the hood. I caught a glimpse of dark grey primer on an edge and about poo poo myself. From that point on, I was MUCH more gentle with the abrasives.
|
# ? Aug 1, 2016 16:07 |
|
meatpimp posted:I honestly didn't see a lot of difference in result between using just UC and M105 first...
|
# ? Aug 1, 2016 16:12 |
|
meatpimp posted:I honestly didn't see a lot of difference in result between using just UC and M105 first... Didn't notice the boatload of dust with M105, eh?
|
# ? Aug 1, 2016 16:22 |
|
Pad was definitely turning red throughout the entire process, but I thought was normal. Should I have lubricated the pad more? I think I just overdid it with 3 passes of M105. I kept cutting but the paint was still faded so I thought I just need to go farther. Oh well, live and learn.
|
# ? Aug 1, 2016 16:28 |
|
Yeah, that's normal since its single stage paint. Cutting (aka M105) is to remove defects in the paint by essentially removing a layer of paint so that everything is at the same level. Polishing turns the dull finish from cutting into a a shine. You were trying to get a shine from the abrasive part of the process. Think of it like sanding wood, you use 80 grit to get everything roughly smooth and then make several passes with 200, 400, 800 grit to it incredibly smooth.
|
# ? Aug 1, 2016 16:39 |
|
That makes sense but I was getting a shine from the other panels using 105. The 205 actually seemed kinda pointless on some. The first shop I pinged quoted me $185 for a blend paint repair. Seems steep, no? Wouldn't repainting the entire panel make more sense or is that going to really cost me an arm and a leg?
|
# ? Aug 1, 2016 16:45 |
|
The rear fascia panel is a pretty good target to learn how to paint. The only concerns is that it is made of polyurethane, so it'll be a bit different vs a metal body panel. If you want to learn, do it. If you want to pay someone else to get it 100% perfect, you're out $200.
|
# ? Aug 1, 2016 16:49 |
|
For future reference, if you don't have a crazy carbon fiber car, paint depth gauges can be had for < 50$. I would suggest anybody wanting to buff and polish pick one up just for safety sake. *Edit* They are also fantastic for used car buying. Repainted panels have super thick readings compared to factory painted panels. FlapYoJacks fucked around with this message at 18:23 on Aug 1, 2016 |
# ? Aug 1, 2016 18:21 |
|
Let's say I choose to have a go at it myself, any tips on where to buy the supplies? Good beginner guides for a single stage job?
|
# ? Aug 1, 2016 18:25 |
|
willroc7 posted:Let's say I choose to have a go at it myself, any tips on where to buy the supplies? Good beginner guides for a single stage job? 1) Drive the car down to a local shop that sells automotive paint and have them mix you up a can of matched paint. 2) Get a HPV gun from Harbor Freight and a Air Compressor if you don't have one. 3) Find a good guide on Youtube. As always, 99% of a fantastic paint job is prep.
|
# ? Aug 1, 2016 18:28 |
|
What about an aerosol can or two from automotivetouchup.com? I don't have an air compressor or paint gun. If I need those to do a good job, I'll probably pay to have it done...
|
# ? Aug 1, 2016 18:33 |
|
willroc7 posted:What about an aerosol can or two from automotivetouchup.com? I don't have an air compressor or paint gun. If I need those to do a good job, I'll probably pay to have it done... $200 really doesn't sound that bad if it's going to be a good job.
|
# ? Aug 1, 2016 18:51 |
|
the spyder posted:RIP PAUL WALKER came by and we shocked his Passat, it had no problem removing the smoke/mold/musty odor/sweet stench after three (15-20min) treatments. I think I may need to do another deep-clean and/or another shock, the smell has come back, albiet a bit less. To be fair, the Passat was reallllly gross and the ozone machine helped a fair bit. It's beein airing out indoors for a few days now...
|
# ? Aug 1, 2016 19:08 |
|
Just chiming in to say that Stoner's bug and tar remover spray is amazing, I think I saw the recommendation in here. I used to use the one that comes in the white bottle with the annoying lid (it's a liquid), but I had much better and faster results with Stoner's.
|
# ? Aug 7, 2016 18:19 |
|
Is there a good reference that someone can direct me to that can show me step by step what a good detailing process should look like and what each step does specifically? Also what is a good entry level orbital polisher one can get?
|
# ? Aug 8, 2016 03:43 |
|
Any suggestions for a good leather cleaner for a steering wheel? Found a leather wheel for my Ranger at the junkyard in excellent shape, but looks like it has lived its entire life under a cheap steering wheel cover and could use a thorough cleaning.
|
# ? Aug 10, 2016 06:29 |
|
I use Autoglym Leather Cleaner. Has always been very effective at removing crud.
|
# ? Aug 10, 2016 07:54 |
|
I bought the wife a silver convertible electric razor for a car. I have also just bought 200$ worth of detailing supplies because I haven't detailed in 2 years (yes I am shameful.) God help me.
|
# ? Aug 10, 2016 21:03 |
|
ratbert90 posted:I bought the wife a silver convertible electric razor for a car. It's ok. My dirty pleasure is taking the brush and scrubbing in an old beater with already terrible paint. Share your detailing sins itt.
|
# ? Aug 10, 2016 22:27 |
|
Etrips posted:Is there a good reference that someone can direct me to that can show me step by step what a good detailing process should look like and what each step does specifically? Also what is a good entry level orbital polisher one can get? Yes please. I need to do the same after a purge of old/terrible/useless supplies from the recesses of the garage.
|
# ? Aug 10, 2016 23:17 |
|
ratbert90 posted:I bought the wife a silver convertible electric razor for a car. This has to be a Pontiac Solstice, right? It's what I think of whenever I see one.
|
# ? Aug 11, 2016 14:01 |
|
Larrymer posted:This has to be a Pontiac Solstice, right? It's what I think of whenever I see one. Yes, yes it is. 2007 NA, but she's quite happy with it.
|
# ? Aug 11, 2016 16:03 |
|
http://imgur.com/gallery/fRlCQ That's an impressive before and after.
|
# ? Aug 15, 2016 23:19 |
|
InitialDave posted:http://imgur.com/gallery/fRlCQ So was that a flood car? How else could it get like that?
|
# ? Aug 17, 2016 01:14 |
|
amenenema posted:So was that a flood car? How else could it get like that? It has to be. Besides some places looking like dried puddles, a car that neglected would have wear and tear on things like the upholstery to go with it. It would have some spots where things were touched habitually in normal use, skin oil attracting more dirt there. Dirt rubbed off in other places. e. AND ANOTHER THING...Lets say a person could somehow let a car get that dirty. Is it possible that they keep the body that straight? Not a chance. Bogatyr fucked around with this message at 02:18 on Aug 17, 2016 |
# ? Aug 17, 2016 02:14 |
|
Good point bogat. He says in the imgur comments that it isn't a flood car, I think he's full of poo poo.
|
# ? Aug 17, 2016 11:51 |
|
Looks like a habitual Burner's car. Dust gets everywhere.
|
# ? Aug 17, 2016 12:40 |
|
There IS significant wear on a lot of the silver on the door pieces. There's also no clear line that would indicate a high water mark and there's no way anything there would be salvageable if it was completely submerged. I have seen people destroy their cars this badly before. I have no trouble believing this is due to abuse and neglect.
|
# ? Aug 17, 2016 18:40 |
|
Some rear end in a top hat opened their car door into mine and put a nice ding and left some paint on mine. It's a BRZ with really thin paint. I have a touch-up pen ready to use to cover up the paint that they removed, but what's the best way to remove the paint transfer that their door left? I don't have a buffer but I have a pretty nice electric drill.
|
# ? Aug 29, 2016 16:41 |
|
two_beer_bishes posted:Some rear end in a top hat opened their car door into mine and put a nice ding and left some paint on mine. It's a BRZ with really thin paint. I have a touch-up pen ready to use to cover up the paint that they removed, but what's the best way to remove the paint transfer that their door left? I don't have a buffer but I have a pretty nice electric drill. Magic Eraser.
|
# ? Aug 29, 2016 16:48 |
|
I've used rubbing compound in the past but the Magic Eraser is probably a safer starting place.
|
# ? Aug 29, 2016 16:53 |
|
meatpimp posted:Magic Eraser. First try some clay or a nanoskin sponge. Magic Eraser is pretty harsh.
|
# ? Aug 29, 2016 16:53 |
|
|
# ? May 26, 2024 08:22 |
|
ratbert90 posted:First try some clay or a nanoskin sponge. Magic Eraser is pretty harsh. I just don't see Magic Erasers as harsh. They are my first go-to with marks or mars on cars or bikes... it's all in how you use it. Don't push like a monkey and take your time.
|
# ? Aug 29, 2016 19:32 |