|
KingColliwog posted:I have a lodge that I like, but I'd enjoy a higher quality (so I guess old) cast iron. I live in Canada. Flea markets, yard sales and estate auctions are a great place to look, it seems like you have a better chance a finding a good pan that isn't way overpriced. I usually take a small steel ruler with me so I can check to see if the bottom is warped. Also, hold it by the handle with two fingers and hit it with your knuckle to see if it's cracked. A cracked pan will usually have a dull thud, a good pan will have a short ringing sound to it. I don't usually care if the pan has so much crud built up on it that I can't see the name or marks on the bottom, if it' has that much build-up on it it's probably a good old pan (and t's fun to clean it up and find out what it is). Older Lodge pans are nice and smooth on the inside and usually go pretty cheap because they are unmarked and 'generic'. Identifying Lodge cast iron Arc Logo - from 1910-1930's No logo - late 1930's - heat ring with one notch at 12 o'clock (opposite side of the handle) and a raised size number on the top of the handle or the bottom of the pan under the notch. No logo - 1940's-1950's - heat ring with three notches at 9 12 and 3 o'clock No logo - 1950's-1960 - letters were added denoting the type of pan. SK for skillet, DO for dutch oven , etc No logo - 1960-1987 - "Made in USA was added Egg Logo - 1987-current
|
# ? Jul 25, 2016 22:10 |
|
|
# ? May 13, 2024 09:20 |
|
Biscuit Joiner posted:Flea markets, yard sales and estate auctions are a great place to look, it seems like you have a better chance a finding a good pan that isn't way overpriced.
|
# ? Jul 26, 2016 17:53 |
|
^^^ This is a really good idea, my mom gave me most of her cast iron because she got weaker with age and the big skillets are too heavy for her to handle now.KingColliwog posted:I have a lodge that I like, but I'd enjoy a higher quality (so I guess old) cast iron. I live in Canada. coyo7e fucked around with this message at 20:04 on Jul 26, 2016 |
# ? Jul 26, 2016 20:00 |
|
I want to rehab my cast iron but I don't know if I have to start from scratch (sticking it in a hot oven until it all comes off and then reasoning), or just season it more. This isn't rust, just uneven seasoning. I oil it every time I use it, but as I just read in the OP olive oil is not a good oil for this, I'll start using veggie oil. I want it to look perfect. Any advice appreciated.
|
# ? Jul 27, 2016 21:01 |
|
Put some flaxseed oil on it and stick it in the oven for a bit. You can get a small bottle from Amazon or whole foods for less than
|
# ? Jul 27, 2016 23:06 |
|
My dudes, check out what I just picked up: Got it for the sweet sweet price of $free; I spotted it sitting next to the dumpster on top of some old furniture. It's pretty gunky, but no cast iron is ever beyond saving as we all know. I predict pancakes and awesome burgers in my future, as great as my pans are they're limited on real estate so this will be a nice change. Late edit: Yeah, that'll do. (ignore the crust on the egg, I didn't let it cool down enough after turning the heat down so the first side browned a little. Yolk and the other side were perfect.) Fender Anarchist fucked around with this message at 21:01 on Aug 1, 2016 |
# ? Jul 31, 2016 15:54 |
|
Enourmo posted:
Good find!
|
# ? Aug 6, 2016 19:00 |
I'm on mobile and thought it was hash browns. Both are acceptable.
|
|
# ? Aug 7, 2016 04:09 |
|
I was trying to figure out why someone would put a slice of Kraft cheese on a pancake
|
# ? Aug 7, 2016 14:52 |
|
Thanks to Alpine Mustache for the Flax Seed Oil tip. Took her out for a spin. This is one of the better recipes out of One Pan Two plates by Carla Snyder, a great book I recommend: https://play.google.com/books/reader?id=xQ2UAQK7X_EC&printsec=frontcover&output=reader&hl=en&pg=GBS.PT17 After setting the oven to 350 you're gonna wanna slice up six thin slices of prosciutto and crisp it up in 2 tbsp of butter (bacon oughta work fine I think but I haven't tried it). Transfer prosciutto to paper towel and pour the prosciutto flavored butter over 1/2 cup breadcrumbs (sorry about crappy photo). At the same time cook some large shells (2.25 cups) until they're just shy of al dente (look on the package and subtract 2 minutes from the recommended cook time. Then shock the pasta with cold water to keep it from cooking. Helps to sing Peter Gabriel's shock the monkey but substitute the word monkey with pasta as you do this. So now you've got your crispy meat, flavored breadcrumbs, and nearly cooked pasta. Get you cheeses on son! Recipe calls for 1/3 cups of grated gruyere, goat, and parmesean, we usually do 1/2 cup of each. Next melt 2 tbsp butter in the pan you cooked the prosciutto and add 1.5 tbsp flour. Mix it in and once it foams up add 1.5 cup warm milk. Recipe says to cook for just a couple minutes to get it thick but I usually go for at least 5. Add cheese, salt, pepper, and grate in some nutmeg. Now mix in the prosciutto, pasta, and top with bread crumbs. Pop it in the oven for 20 minutes, and if you're like me use the broiler at the end for maximum brownening. Throw some chives from the garden on top to be a fancy pants. I know mac and cheese isn't really anything to write home about, but the buttery prosciutto breadcrumbs, three cheese blend, and baking it in a cast iron makes it the perfect comfort food. We make this a lot in my house. I kinda want to substitute one or two of the cheeses with a different cheese, any suggestions?
|
# ? Aug 12, 2016 01:37 |
|
Oh my god this looks amazing I'm already looking up the next time my vegetarian roommate is out of town so I can do this
|
# ? Aug 12, 2016 01:57 |
|
legendof posted:Oh my god this looks amazing Do they get offended if you eat meat? Also that dish looks amazing... although my lactose intolerance just made me gassy by looking at it!
|
# ? Aug 12, 2016 16:01 |
|
Regnevelc posted:Do they get offended if you eat meat? No, we just always cook for the whole house.
|
# ? Aug 12, 2016 18:39 |
|
Fake bacon maybe? I keep trying to think of something salty and vegetarian and keep coming up with nuts and that sounds dumb. I guess if you can get veggie bacon crisp it might be worth a shot.
|
# ? Aug 13, 2016 09:15 |
|
Mushrooms instead of bacon for vegetarians. If you're looking to swap out one of the cheeses, consider Gouda.
|
# ? Aug 13, 2016 18:38 |
|
Soyrizo is really tasty...
|
# ? Aug 13, 2016 18:38 |
|
Kenji's got an excellent recipe for mushroom bacon. http://www.seriouseats.com/2015/02/recipe-update-even-better-mushroom-bacon-vegan-experience-food-lab.html
|
# ? Aug 13, 2016 20:07 |
|
BBQ Dave posted:...something salty and vegetarian... Season the sauce with Vegemite. Or Marmite if you want a bit more twang.
|
# ? Aug 13, 2016 20:22 |
Today's carboot find! A 26cm pan identical to the 13 I already have, only much newer looking. Been looking for a decent big pan forever. Here it is scrubbed clean. Here's my identical but smaller and much more beaten up pan for comparison, I've finally managed to get a fried-egg-safe seasoning on this thing again, although it still has dents and nicks in the seasoning. Currently have it in the oven with a nice coating of flax oil on it, this should be good!
|
|
# ? Aug 13, 2016 20:23 |
|
Maybe this is a dumb question but: I bought my first cast-iron skillet today, I'm thinking I'll let it season tomorrow while I do other chores around the house. I was planning on using the Cook's Illustrated seasoning guide linked elsewhere in the thread. Mine comes preseasoned though, and CI says to strip it of the preseasoning first by running it through the oven's self-cleaning cycle. My oven is cheap and does not have a self-cleaning setting. Is there a standard temp/time to use for that?
|
# ? Aug 14, 2016 00:26 |
|
No, self clean can can get into the thousands of degrees and it's impossible to set your oven that high manually. You can always strip the seasoning by soaking on 50:50 vinegar:water for a few hours and then giving it a little elbow grease with a wire brush. You can also use a grinding wheel.
|
# ? Aug 14, 2016 00:33 |
|
You could just start cooking on it as well.
|
# ? Aug 14, 2016 04:14 |
|
FetusSlapper posted:You could just start cooking on it as well. This is what I did with my 10" Lodge about 10 years ago. No complaints so far.
|
# ? Aug 14, 2016 04:48 |
Yeah just soak it for a while and then scrub it down with a brillo pad, then throw some flax oil or bacon or whatever on it. It'll be fine. New pan up there came out lovely, although there's a weird shiny spot in the center. Gonna try cooking on it later!
|
|
# ? Aug 14, 2016 09:22 |
|
Taking a grinding wheel to a brand new pan seems silly to me
|
# ? Aug 14, 2016 15:08 |
|
Anyone here got any forged skillets? Apparently they used to forge iron skillets in the past too, and not just cast them. The resulting pan is thinner and lighter, less porous. I think noticed while watching this youtube guy who does 18th century cooking and he used skillets that looked a bit off for being cast iron, basically too thin looking. Well they sell them and it says they're forged: http://jas-townsend.com/6inch-fixed-handle-skillet-p-1478.html Some day I'd like a forge and bang together my own skillet (no, seriously, I do have a long term goal of having a forge).
|
# ? Aug 14, 2016 19:50 |
|
His Divine Shadow posted:Anyone here got any forged skillets? Apparently they used to forge iron skillets in the past too, and not just cast them. The resulting pan is thinner and lighter, less porous. I think noticed while watching this youtube guy who does 18th century cooking and he used skillets that looked a bit off for being cast iron, basically too thin looking. Well they sell them and it says they're forged: The point of cast iron is to be dense and heavy - but that might be a cool pan. I wonder how they compare to carbon steel
|
# ? Aug 14, 2016 22:36 |
|
McSpankWich posted:No, self clean can can get into the thousands of degrees and it's impossible to set your oven that high manually. You can always strip the seasoning by soaking on 50:50 vinegar:water for a few hours and then giving it a little elbow grease with a wire brush. You can also use a grinding wheel. It's more like 900F, not thousands of degrees. You'd be melting the glass and everything else at those temps.
|
# ? Aug 14, 2016 22:41 |
|
Bob Morales posted:The point of cast iron is to be dense and heavy - but that might be a cool pan. I wonder how they compare to carbon steel I was thinking the same. Sounds like a cool pan.
|
# ? Aug 15, 2016 13:22 |
|
Thanks for the tips guys. I washed mine with a little bit of Pam and some water (there was a spot from where the label had been affixed with glue, I had read that Pam would take it off and that seemed to work) and made some BLTs tonight. Delicious. Gonna try burgers in a few nights, probably BLTs again sometime soon, too.
|
# ? Aug 15, 2016 23:50 |
|
Picked up an old Husqvarna skillet at a booth fair. I've gone at it with angle grinder and bristle brush attachments, I find they give the nicest results and don't hurt the metal. On the bottom I flattened it using a disc sander because why not, got tools, gotta use them, made a nice circular pattern that followed the factory look. Also used a randon orbital sander on the inside and smoothed it down. Contrary to opinion I really think it helps alot. Then oil and into the oven. It came out looking kinda rusty / yellowish. That's how it goes for me and I usually find it works better to continue seasoning by cooking after this step. So I started frying eggs, perhaps not the best but i had no bacon. The first one was sticky but the 2nd one was basically like a teflon pan. The secret I find is the spatula. God I love this spatula, I could not cook without it. I fried the 1st egg and I scraped off the pieces that got stuck, metal is the key here, with soft edges, keep scraping and scraping until it's gone, you'll feel how the spatula just glides really easily on the surface. I cleaned out the pan, more oil & salt, then another egg and yes, near perfect non-stickage. As you can see, I like my eggs fried to a crisp as well, no runny yolks for me. More like chips. Anyway now I just gotta keep on using it and it'll turn all black. I really like this small one, will be great for pancakes and eggs and smaller stuff. No need to haul out the big one every time.
|
# ? Aug 21, 2016 16:45 |
Sweet, first thing I cooked in mine was a fried egg too, this pan came up really nice. It stuck a little bit, but I'd only really put two coats of oil on it. Nettle Soup fucked around with this message at 17:23 on Aug 21, 2016 |
|
# ? Aug 21, 2016 17:21 |
|
Nettle Soup posted:Sweet, first thing I cooked in mine was a fried egg too, this pan came up really nice. It stuck a little bit, but I'd only really put two coats of oil on it. I may be way off base here, but is that a Le Creuset with the "satin black" interior surface? I inherited one of those and I have no idea how to use/clean it. Treating it like my Lodge doesn't seem to work. Treating it like a normal pan doesn't seem to work. moller fucked around with this message at 09:18 on Aug 22, 2016 |
# ? Aug 22, 2016 09:13 |
|
moller posted:I may be way off base here, but is that a Le Creuset with the "satin black" interior surface? I inherited one of those and I have no idea how to use/clean it. Treating it like my Lodge doesn't seem to work. Treating it like a normal pan doesn't seem to work. I wash mine like any regular pan and occasionally use Bar Keepers Friend to remove anything that starts building up on it. It works great. https://www.amazon.com/Bar-Keepers-Friend®-Cleanser-Polish/dp/B000V72992
|
# ? Aug 22, 2016 18:14 |
moller posted:I may be way off base here, but is that a Le Creuset with the "satin black" interior surface? I inherited one of those and I have no idea how to use/clean it. Treating it like my Lodge doesn't seem to work. Treating it like a normal pan doesn't seem to work. It's "Cousances", which Google helpfully informs me is actually Le Creuset under a name they stopped using in the 80s, neat. It doesn't seem to have any sort of finish on the inside, I just scrubbed it down and then seasoned it...
|
|
# ? Aug 22, 2016 20:14 |
|
I bought this little thing for $10 in Home Goods or somewhere similar recently, but didn't realize it had holes in the bottom until I took it out the packaging (see 2nd picture). http://www.wayfair.com/Oval-Cast-Iron-Grilling-Dish-183809-MBQ1480.html I wasn't intending to use it on a proper grill (we have a shared one here but I've never cooked on one before as in the UK BBQ generally refers to burnt sausages on a disposable charcoal piece of crap, and I'm a bit cautious and want to learn it all first!) but just stick in the oven. Would you just line it with foil or similar first to stop all the juices dripping out of it, or just not use it in a home appliance full stop? It looks quite cute for a little single serving thing to do fajitas or similar.
|
# ? Aug 23, 2016 03:14 |
|
I'd stick it on a small baking sheet or whatever to contain the juices.
|
# ? Aug 23, 2016 03:16 |
|
Cool, I'll give that a whirl. Thought it would have some use so that's good to know!
|
# ? Aug 23, 2016 04:05 |
|
i'll just leave this here.
|
# ? Aug 27, 2016 21:53 |
|
|
# ? May 13, 2024 09:20 |
|
I bet
|
# ? Aug 27, 2016 22:52 |