|
Geirskogul posted:I had no idea hifi timers were a thing Ah, the days when equipment had a little "120/240" switch hidden in the back. Nowadays all the switching power supplies don't really care as long as you feed it 50/60Hz 100-240Vac. ASIDE: I always giggle when I see the HUGE UK power plugs with the built in fuses. Compared to the US plugs they're so comically large (but arguably safer and they have a build-in fuse).
|
# ? Sep 6, 2016 21:14 |
|
|
# ? May 14, 2024 15:00 |
|
nigga crab pollock posted:on the saturn its not actually the quake engine it's a modified version of the build engine i think i know that somebody's made a source port of doom 64 that requires a doom 64 rom file to generate the wad file. but obviously that's going the other direction.
|
# ? Sep 6, 2016 21:18 |
|
The Kins posted:Yeah, Quake DS was hitting a memory wall. The same guy did a Quake 2 DS that required the RAM pack and a belief in religion to get to function. I raise a Zaurus port. All the joys of lovely PDA Quake but now with Linux!
|
# ? Sep 6, 2016 21:53 |
|
This thread has recently taught me to:
|
# ? Sep 6, 2016 22:16 |
|
The Kins posted:It's a custom engine originally developed for the console versions of Exhumed/Powerslave, called Slavedriver. The developers (Lobotomy Software) successfully got the license to port Quake and Duke Nukem 3D to Saturn, arguing that it'd be quicker, easier and cheaper than porting the real game engine's to the Saturn's hosed up architecture. We got Death Tank though, this makes everything worthwhile. It's a shame Zwei never got properly ported. The XBLA sequel was fine I guess, but the simple graphics and 7 player local just made the Saturn version so phenomenal.
|
# ? Sep 6, 2016 22:33 |
|
Three-Phase posted:ASIDE: I always giggle when I see the HUGE UK power plugs with the built in fuses. Compared to the US plugs they're so comically large (but arguably safer and they have a build-in fuse). UK home wiring (and some of their plumbing practices) is genuinely horrifying compared to countries with actual modern electrical codes with giant ring circuits being common. Each plug has a fuse so that a malfunctioning washing machine doesn't start a fire in a bedroom.
|
# ? Sep 6, 2016 23:29 |
|
Correct me if I'm wrong: A modern US outlet is 14 amps, 15A breaker, 120v. So, around 1800W of available power. Also, all wiring going to the outlet must be rated to at least 15A (though I always buy 20A wiring when doing retrofits because). A UK outlet is 13A at 240V. 3100W of available power. Also, Wikipedia posted:Rules for ring circuits say that the cable rating must be no less than two thirds of the rating of the protective device. (referring to the 20, 30, or 32A fuses in the plug, or the breaker itself) quote:The IET Wiring Regulations (BS 7671) permit an unlimited number of socket outlets to be installed on a ring circuit, provided that the floor area served does not exceed 100 m2. However, it also states that many older homes (which is most homes) only have 10 or 12A rated wiring in the ring. Plus there's also the fact that an "electrician" can gently caress up and cross-connect two rings, meaning you have a possible failure or short being shared between two 32A breakers. "Why Tea Kettles Boil Slowly in the US" posted:An “average” kettle in the UK runs at about 2800 W A very good video (13:20 if you're on mobile and it doesn't jump) by one of my favorite youtubers, bigclivedotcom https://www.youtube.com/watch?v=XTUUijDclWk&t=798s "We have this organization, called the IET, which sets electrical standards, and 90% of what they seem to do with regards to domestic, that's home installations, is invent new ways to test ring mains." Queen_Combat has a new favorite as of 23:56 on Sep 6, 2016 |
# ? Sep 6, 2016 23:40 |
|
I saw packages of "fuse wire" you would string between two points. Totally not a fire hazard. Yeah ring mains are kinda' nutty. At least for low voltage applications like that. I don't think the United States NEC would ever allow that sort of configuration. You can do things like paralleling really big wires for low voltage high current applications but I don't think a ring structure is ever permitted. PS 1800 watts... Assuming unity power factor! Three-Phase has a new favorite as of 00:27 on Sep 7, 2016 |
# ? Sep 7, 2016 00:22 |
|
I always have a sensible chuckle whenever someone from the UK gets smug about their plugs, which have to be like that to compensate for how unsafe everything else is.
|
# ? Sep 7, 2016 00:26 |
|
Speaking of electrical relics: I still work with a lot of old electromechanical relays (they basically measure electricity and say "HOLY CRAP TURN OFF TURN OFF NOW" to big circuit breakers.) They're all sorta' clockwork. http://youtu.be/IQ1Fz_l9POs And for each protective element (overcurrent, phase loss, lockout, ground fault) you need a completely separate relay all working together. Nowadays they are completely electronic and one box can do tons of different things. They can even record energy like a power meter, talk to a computer network, and record what happened if something goes wrong. Three-Phase has a new favorite as of 00:37 on Sep 7, 2016 |
# ? Sep 7, 2016 00:34 |
|
Three-Phase posted:PS 1800 watts... Assuming unity power factor! Well yeah, the only thing I ever had approaching 1800 watts was a space heater, and resistive loads are basically always 1, right? Still, though, I do not understand ring mains. Their purpose, everything. It's all more complicated than a radial/spoke system. Queen_Combat has a new favorite as of 00:45 on Sep 7, 2016 |
# ? Sep 7, 2016 00:39 |
|
Yeah that's pretty much it.
|
# ? Sep 7, 2016 00:43 |
|
Three-Phase posted:
Even more importantly, physical I/O wiring between protective devices is a tech relic if a modern (hopefully IP based-) protocol is used.
|
# ? Sep 7, 2016 01:29 |
|
I lived in the UK for a year and was baffled by all of the power safety stuff their plugs had. Every outlet in the house had a switch to turn it off at night, every plug had a fuse, and they were really big and rigid. I just used a cheap plug adapter for my MacBook when I lived there and it didn't have a fuse in it, and it didn't have a real ground prong (it was plastic). I was using it on a switching power supply so I didn't expect any problems but one day while using it on the couch the base of the cable that goes from the power brick to the computer just caught fire out of nowhere. Apple replaced the power adapter no problem with a proper UK plug. Then a few days later I spilled chocolate milk all over it and couldn't source a white keyboard so I replaced it with a black one. I called it the tuxedo MacBook.
|
# ? Sep 7, 2016 01:43 |
|
|
# ? Sep 7, 2016 02:00 |
|
Having lived in the US for nearly 29 years, I've never had my wires just catch fire.
|
# ? Sep 7, 2016 02:07 |
|
Cojawfee posted:Having lived in the US for nearly 29 years, I've never had my wires just catch fire. Not that you know.
|
# ? Sep 7, 2016 02:16 |
|
Cojawfee posted:Having lived in the US for nearly 29 years, I've never had my wires just catch fire. I have actually. Then again, this house was built in 1930...
|
# ? Sep 7, 2016 02:21 |
|
Cojawfee posted:Having lived in the US for nearly 29 years, I've never had my wires just catch fire. Amateur.
|
# ? Sep 7, 2016 02:22 |
|
revmoo posted:I have actually. Then again, this house was built in 1930... My house was built in the 60s... The wiring in my wall caught fire when I was about 16.
|
# ? Sep 7, 2016 02:25 |
|
I haven't had any wires catch fire. I did have a wire, not a large one (12AWG 8kV) that vaporized due to short-circuit current. We found he outer insulation blown apart where the vaporized copper escaped, and the copper nowhere to be seen. It ripped itself off of several sets of tie-wrap anchors in the process too. Over years corona discharge damaged the high-voltage insulation until it was damaged enough to permit a path to ground. Three-Phase has a new favorite as of 02:32 on Sep 7, 2016 |
# ? Sep 7, 2016 02:26 |
|
It's a fusible link, a safety device, really. lol
|
# ? Sep 7, 2016 02:32 |
|
TotalLossBrain posted:It's a fusible link, a safety device, really. Irony: It was a rather short run between the bus and one of the terminals of a potential (voltage) transformer fuse. That little section wasn't protected. I was told there was a dull bang and then the system tripped offline. As far as old electrical "tat" goes: here's Photonic Jnduction with a very old, very huge, circuit breaker that he takes apart: https://m.youtube.com/watch?v=WAhq_A4EbkE (PS I am not Photonic Induction.) Three-Phase has a new favorite as of 02:37 on Sep 7, 2016 |
# ? Sep 7, 2016 02:34 |
|
Cojawfee posted:Having lived in the US for nearly 29 years, I've never had my wires just catch fire. Once, I had the AC adapter wire on my laptop's power brick (the one leading from the laptop to the brick) catch fire after it had weakened to the point where it couldn't maintain contact unless it was bent a certain way.
|
# ? Sep 7, 2016 02:36 |
|
Sad it's no longer online but does anyone remember itplaysquake.com or itplaysdoom.com?
|
# ? Sep 7, 2016 02:37 |
|
I had the wire inside my wall, right by the outlet, catch fire. And it was recently installed with new 20A wiring. Turns out it was bent just wrong enough that it cracked the copper and caused a high resistance point, causing heat. It can just happen.
|
# ? Sep 7, 2016 02:46 |
|
A poo poo-ton of houses/mobile homes built around 1970* had aluminum wiring, which was notorious for expanding/contracting, as aluminum is known for, loosening up, then causing a lovely, high- resistance connection that gets hot and burns poo poo up in the walls. I had this happen once without major destruction, but gently caress aluminum wire. *three-phase probably knows the exact years it was used.
|
# ? Sep 7, 2016 03:05 |
|
For a internet/Computer tech relic post, I was going through my system and checked my screensavers - lo and behold I still have this in my options from whenever way back. I must have actually paid for it as it's registered!: Note - not my video. https://www.youtube.com/watch?v=ya5OUoW-OSk Amazingly this thing has worked from WinXP right through upgrades to Win10 and not a single update required to get it working. I just set it for fun and woohoo! Excuse the mess: EDIT: If you for some reason do want it - it's from uselesscreations.com - that site itself seems stuck in history. Humphreys has a new favorite as of 11:37 on Sep 7, 2016 |
# ? Sep 7, 2016 11:07 |
|
JnnyThndrs posted:A poo poo-ton of houses/mobile homes built around 1970* had aluminum wiring, which was notorious for expanding/contracting, as aluminum is known for, loosening up, then causing a lovely, high- resistance connection that gets hot and burns poo poo up in the walls. I thought it was more post-WW2 than the 70s. around '99 everybody had a Matrix screensaver.
|
# ? Sep 7, 2016 11:34 |
|
Any recommendation on keeping my home safe from burning down from electrical wiring? My house was made in the 1950s so now I am a bit worried. Do people actually bash all their walls down and check the wiring before something happens? A decent amount of the wiring in my home looks kind of like when a snake sheds; it's got like a kind of silvery covering; not sure what the hell it is called and I am also not sure if it's the "bad kind".
|
# ? Sep 7, 2016 11:52 |
|
Uncle at Nintendo posted:Any recommendation on keeping my home safe from burning down from electrical wiring? My house was made in the 1950s so now I am a bit worried. Do people actually bash all their walls down and check the wiring before something happens? uh hire an electrician to inspect the wiring maybe?
|
# ? Sep 7, 2016 12:16 |
|
Three-Phase posted:I thought it was more post-WW2 than the 70s. My first house was built in 1970 and had it, but none of my later, older houses did. Wikipedia says "In North American residential construction, aluminum wire was used to wire entire houses for a short time from the late 1960s to the late 1970s during a period of high copper prices." But I've not seen it past 1975, personally.
|
# ? Sep 7, 2016 12:36 |
|
Quote-Unquote posted:uh hire an electrician to inspect the wiring maybe? uh I am trying to learn what to look for in my own home and before anything happens in the future maybe?
|
# ? Sep 7, 2016 12:45 |
|
Uncle at Nintendo posted:uh I am trying to learn what to look for in my own home and before anything happens in the future maybe? okay i'll revise my answer: hire an electrician to inspect the wiring and tell you what needs fixing/improving before anything happens in the future
|
# ? Sep 7, 2016 13:33 |
|
doctorfrog posted:This thread has recently taught me to: Psx and n64 run fine on RetroPie though? Unless you have an older one?
|
# ? Sep 7, 2016 13:35 |
|
Uncle at Nintendo posted:Any recommendation on keeping my home safe from burning down from electrical wiring? My house was made in the 1950s so now I am a bit worried. Do people actually bash all their walls down and check the wiring before something happens? Your home is wired with serpents. Good news is they carry magical energy instead of electrical. Bad news is medical science cannot heal mana burns.
|
# ? Sep 7, 2016 13:36 |
|
Mechanism Eight posted:I raise a Zaurus port. All the joys of lovely PDA Quake but now with Linux! I worked on the UI for those things (QtEmbedded/QTopia) Pretty fun hardware for its day, really.
|
# ? Sep 7, 2016 13:43 |
|
Cojawfee posted:Having lived in the US for nearly 29 years, I've never had my wires just catch fire. I had a lovely MicroUSB cable charging my waterproof bluetooth speaker (UE Boom 2) catch fire the other day. I don't know if it was because the charger port was wet which it could of been, or if it was just that the worlds shittiest thinnest cable I found under my bed one day couldn't handle the two amp charger or what. Completely fried the charging port on my $200 speaker, but Logitech is awesome and sent me a new one. I didn't admit to using some questionable cable though.
|
# ? Sep 7, 2016 14:05 |
|
Germstore posted:Your home is wired with serpents. Good news is they carry magical energy instead of electrical. Bad news is medical science cannot heal mana burns. I'm sure there's some sort of Egyptian salve I can use
|
# ? Sep 7, 2016 14:25 |
|
|
# ? May 14, 2024 15:00 |
|
feedmegin posted:I worked on the UI for those things (QtEmbedded/QTopia) Pretty fun hardware for its day, really. i found a video of an sl-c1000 emulating gba pretty much perfectly, which i definitely tried to do on my ipod in like 2009 and it couldn't do it fullspeed with sound. that's pretty impressive. did quake actually run playable and did it have 3d hardware or was it software rendered? also navy seals psp really is not smooth or fun to control even if the framerate is technically better than the 3ds lol. but there are so many different engines that might just be the issue. i think its powerful enough but i swear to god if i find another engine with hard coded camera controls that you can't fix with console commands i am going to scream shout out to masterfeizz for his 3ds quake port because ive been unironically using it as a dev baseline and its not a pain to use, christ nigga crab pollock has a new favorite as of 16:22 on Sep 7, 2016 |
# ? Sep 7, 2016 16:17 |