|
They've been making minis for like 30 years now right, probably still have quite a stockpile of designs to port over to bones medium.
|
# ? May 13, 2017 19:06 |
|
|
# ? May 27, 2024 02:59 |
|
I would guess they've ported less than 10% of their molds to Bones. Keep in mind that a lot of the Bones we've gotten so far are new sculpts, and that the (massive) library of minis on their website only represents what they have in production right now, not the entire stock of molds they own. e. But they should not try to port all of their molds to Bones, because a ton of that back stock are garbage sculpts from 1983 etc. that have been long since obsoleted by newer better sculpts. I would guess that they have a goal of another few hundred of their old sculpts moved to Bones, maximum, but will also expand their line with new sculpts. I believe the long-term goal was also to bring their production process entirely in-house to Texas? Not sure if that's still the plan. Leperflesh fucked around with this message at 19:36 on May 13, 2017 |
# ? May 13, 2017 19:34 |
|
Leperflesh posted:I believe the long-term goal was also to bring their production process entirely in-house to Texas? Not sure if that's still the plan. They already have, the only reason the kickstarters use China is because their in house bonesium makers can't handle the volume required in the timeframe.
|
# ? May 13, 2017 19:38 |
|
Oh okay, cool, makes sense.
|
# ? May 13, 2017 19:43 |
|
I mean, I'm not the definitive source of all things Reaper, but I'm pretty sure I read that was the case, that they have one or two small bonesium machines (which continue to produce bones 1 & 2 stuff for retail), but nothing like the capacity of the Chinese factories when it comes to mass producing shipping crates full of plastic for thirsty nerds
|
# ? May 13, 2017 19:46 |
|
My understanding is that Reaper has always made their miniatures in-house in Texas. The original purpose of the Bones Kickstarter was to get them enough capital to pay for the initial molds and casting equipment to bring plastic production in-house as well. With the huge volume they get in backers, they decided to once the molds were cut in China they would have those factories make the initial high-volume runs, and then ship everything out to them and they make the regular production runs that are much more modest. They basically repeat that with each one, using the funds to get a bunch of molds cut and run the backer's stock, and then making subsequent product at their factory with their new equipment. Their website says their production can scale up to 20,000 miniatures a day, but I have no idea how many figures were needed for a kickstarter fulfillment. It looks like there were around 10,000 people ordering the core set, which has 258 models. So that would be something like 4 months just to produce the core sets that were ordered, but that's only $1m of the $2.7m pledged. Also, I doubt that they can actually meet that full capacity in Bonesium, that's probably their overall production rate for all kinds of miniatures.
|
# ? May 13, 2017 20:09 |
|
They already announced Bones IV at ReaperCon back in September. I have a few pictures of sculpts for it here and even more here. One of the big ones is going to be Baba Yaga's hut. Also with bonus Factory Cat. As for in-house production... They're working hard on getting the expertise and equipment to do their Bones casting in-house. However, when I was there in September, their plastic-injection machines were mostly being used to make bases. They're working on getting molds back in-hand to do Bones in-house, but they're still a ways away from doing any serious Bones-making in Texas. They're definitely working on it, though.
|
# ? May 13, 2017 23:19 |
|
Ashcans posted:My understanding is that Reaper has always made their miniatures in-house in Texas. The original purpose of the Bones Kickstarter was to get them enough capital to pay for the initial molds and casting equipment to bring plastic production in-house as well. With the huge volume they get in backers, they decided to once the molds were cut in China they would have those factories make the initial high-volume runs, and then ship everything out to them and they make the regular production runs that are much more modest. They basically repeat that with each one, using the funds to get a bunch of molds cut and run the backer's stock, and then making subsequent product at their factory with their new equipment. Theyve also said that over 40% of total pledge value arrives in the pledge manager so total value is probably closer to 4.3 million
|
# ? May 13, 2017 23:59 |
|
In an effort to enhance my current Blood Bowl league experience I decided to grab some BONES, to represent my coach and crew. I got them today, and I'm blown away by the quality. it took me over 20 years to finally deviate from GW products, and by the gods, I've never been happier! Bones rocks!
|
# ? May 15, 2017 09:07 |
|
It's happening! Fun fact: I flew that US flag in the background over Afghanistan.
|
# ? May 18, 2017 09:36 |
|
It's like Costco, but only for miniatures. JackMann posted:It's happening! I think that needs an explanation. Did you donate it to them? Did they capture it in a lightning raid? What gives?
|
# ? May 18, 2017 19:11 |
|
We always had a flag with us when we ranged North beyond the wall. Always wondered where they ended up. Now I know they are flying at miniature manufacturers
|
# ? May 19, 2017 04:30 |
|
I fly on a jamming plane. Sometimes we take a flag with us. I've flown flags for family, friends, and people I know. I gave one to ReaperBryan, and they hung it up there.
|
# ? May 19, 2017 07:00 |
|
JackMann posted:I fly on a jamming plane. Sometimes we take a flag with us. I've flown flags for family, friends, and people I know. I gave one to ReaperBryan, and they hung it up there. We did that but on convoys, hence the north of the wall statement. Was stationed in Kuwait and did convoys into Iraq. Did you do Prowlers (love) or Growlers? Or the weird AF one?
|
# ? May 19, 2017 07:39 |
|
Weird Air Force one, good ol' Compass Call. Funnily enough, I'm in Kuwait right now. Should have my Bones waiting for me when I get home.
|
# ? May 19, 2017 08:51 |
|
I'm supposed to be wave 3, but I just got a shipping notice. My label has been created apparently. This may happen much sooner than I expected.
|
# ? May 19, 2017 13:56 |
That's pretty cool. I'm wave 1, but honestly idfc what order these things go out, I think it's all going to happen so fast there won't be a very appreciable difference so WHATEVA JUST SHIP DEM BONESSSSS vv e: Your order seems fairly reasonable, I bet that's weighing in this time around, even if they're not publicly saying so. Like, I would expect people who JUST got a core set to go out pretty much day one. Bad Munki fucked around with this message at 15:11 on May 19, 2017 |
|
# ? May 19, 2017 15:09 |
|
People who got less should really go out faster just from a logistical standpoint - even worked down the list in waves, a wave 1 order with a hundred pieces is just going to take longer than pulling a bunch of cores, and there's no point in having everyone wait for that wave 1 to get filled to do anything else. I'm in Wave 8, and ordered somewhat less than IB did - nothing yet, I guess I'll post
|
# ? May 19, 2017 15:28 |
Yeah I would expect they have a team doing "just core sets" and a team doing "core sets plus a little bit" and then they have the sad team that is "people that ordered tons of extra poo poo at random and will need to be carefully sorted through, possibly taking a solid part of an hour just to put together and verify," and they're all going in parallel for maximum efficiency.
|
|
# ? May 19, 2017 15:32 |
|
For future kickstarters, it may be worth considering buying up the maximum number of core sets (10 in the latest ks) to resell, if nothing else to subsidize your personal purchases. People are perfectly willing to pay 200 dollars for the 100 dollar core set, and possibly 110 for the 50 dollar stoneskull expansion(I've had fair amount of interest but no purchases yet). It's how I've continued to buy whatever I personally want from these kickstarters without spending huge amounts of personal cash.
|
# ? May 19, 2017 16:05 |
|
The downside is 1) waiting for the Kickstarter to deliver to get return on your investment, and 2) having to store them until you've sold 'em. You're fairly well set up to deal with that, since you buy and sell stuff on the regular. But people who've never done it before might end up biting off more than they can chew if they're not careful.
|
# ? May 19, 2017 16:31 |
|
You're also tying up that cash for like two years. Opportunity cost is a real thing you should account for when making investments.
|
# ? May 19, 2017 16:40 |
|
Leperflesh posted:You're also tying up that cash for like two years. Opportunity cost is a real thing you should account for when making investments. Also, the core sets actually aren't that big. Due to the durability of Bonesium, they just cram the Core Set box full of minis with no padding whatsoever, the boxes are about about 12x12x2.5 inches. edit: also a great part about that is that you don't even need to package the Bones box up. Just encase it in tape with the label on it and send it on its way, the figures will survive. I've shipped over 30 different Bones boxed sets in the last few months this way and not a single one wound up with damaged minis, just dinged boxes, which the tape easily held intact. Just make sure to let your customers know that first.
|
# ? May 19, 2017 16:55 |
|
Pretty sure the shipping is too stupid high for that to ever work here
|
# ? May 19, 2017 17:03 |
|
Invictus, do you check the core sets to validate that 100% of the correct minis are there? If not, what do your customers do if their set is missing anything? I assume they can't go back to Reaper for a replacement...
|
# ? May 19, 2017 17:39 |
|
Since I sell them sealed, I don't check them. Had an issue once and he said he was able to get a replacement from Reaper, so it seems they actually do honor it(probably if you show them a picture of the box and the minis dumped out and are like "I'm missing this one figure")
|
# ? May 19, 2017 17:51 |
|
That's very, very cool of Reaper, given you're basically undercutting their post-kickstarter retail channel.
|
# ? May 20, 2017 02:59 |
|
I feel bad for ReaperBryan and Ladystorm (their web person). There's apparently some stuff they don't have permission to talk about yet regarding the shipping (in particular, why the Canadian backers are getting notices now while US backers aren't). Even when they do have information, they can't win. If they're not posting anything, they're failing to communicate with backers. If they do post things, then why aren't they shipping out packages? I'd like to know what's going on with shipping, but I think the folks who can authorize those disclosures (the Pughs) are probably busy enough that it's the last thing on their minds.
|
# ? May 21, 2017 06:58 |
|
Double posting to update you guys on the latest from the Bones rigidity thread.quote:Doug Sendseth said:
|
# ? May 21, 2017 16:58 |
So it's making it stiffer...I wonder if that's coming with a commensurate increase in brittleness, it'd be super unfortunate if stiffening swords and such this way meant they were now able to be broken off.
|
|
# ? May 21, 2017 19:55 |
|
I always saw the flexibility as an improvement to durability. Its not like its going to bend unless you jam it into an inappropriately sized box.
|
# ? May 22, 2017 04:45 |
|
It'll be interesting to see if the rigidity makes it more brittle or not. It might be something you can trade off. Leave it in for a certain amount of time to make them a little less likely to go floppy, but not so stiff they break off. Also, they've released some info. Looks like their shipping partner requested they send all of the Canadian packages off at once, which is why Canadian backers were getting shipping notices but Americans weren't. Now they're shipping out the American packages, and they have a tracker here.
|
# ? May 22, 2017 18:49 |
|
I definitely don't want to lose the durability of Bones, a big lure for me is the ability to dump a bunch of these guys into a box and not have to worry about swords snapping and stuff - or to let my kids wrangle them without the same concern. I would expect that any stiffening is going to come with increased brittleness because I think that is how it works in general for materials) so its mostly a question of how much force it takes to break stiffened bones. On the other hand I am sure that there are people who fall into a different camp and want the stiffness without worrying about the durability quite so much, and this would be a good thing for them.
|
# ? May 22, 2017 18:56 |
|
What I'm saying is I want my Bones here in Aus and I want them now e: quote:Pacific-Zone (Asia, Australia, Pacific Islands) orders are likewise loaded on a container, although this has not been picked up by the carrier yet (it is scheduled for pickup tomorrow). You will receive tracking from the Australian facility when they apply postage, we will keep you updated with the container progress as we can. Americans are going to get theirs months before we get ours, and we're the ones who 'subsidised' their free shipping, gently caress that noise. NTRabbit fucked around with this message at 08:31 on May 23, 2017 |
# ? May 23, 2017 01:48 |
|
Yep, I've been loving ripped off. $179 in shipping is what my $476 worth of Bones cost me, and now instead of airmail they think it's perfectly fine to stick it in another boat, for another month across the ocean, at a greatly reduced price, and then pocket the difference while saying it reduced import duty and tax (that doesn't exist). gently caress Reaper, this sort of shady bullshit isn't on.
|
# ? May 24, 2017 17:48 |
|
That arrangement seemed fine to me when I thought that it was saving you import costs, but if its not actually saving you anything in that form then yea it seems pretty bad to hit you with a big shipping fee that you don't actually get the benefit of.
|
# ? May 24, 2017 17:58 |
|
Maybe if they actually charged Americans $10 each for shipping instead of using the ROW backers to pay for all of the shipping then they wouldn't need to rip us off so outrageously
|
# ? May 24, 2017 18:01 |
NTRabbit posted:while saying it reduced import duty and tax (that doesn't exist). Whereabouts are you? Because last year, that was the problem, a lot of people got hit with import...stuff, and got dinged by customs. I don't think they're trying to actually rip you off or do anything shady, but there may be some case that didn't work out as intended. Have you contacted them about it?
|
|
# ? May 24, 2017 18:24 |
|
NTRabbit posted:Maybe if they actually charged Americans $10 each for shipping instead of using the ROW backers to pay for all of the shipping then they wouldn't need to rip us off so outrageously
|
# ? May 24, 2017 18:27 |
|
|
# ? May 27, 2024 02:59 |
In related news, I got my shipping notice this morning (Wave 1, United States as funded by tragic 3rd-world backers), getting pretty excited to not paint yet another giant pile of plastic fantasy mans!
|
|
# ? May 24, 2017 18:30 |