|
webmeister posted:So I've been doing a bunch more videos about World Heritage sites (mentioned earlier up the page). I feel like I'm getting in a fairly good groove with them, and I've got a much better idea of what I need to do and say while on location. But I'm just wondering if anyone else has advice or recommendations? This is a recent video I did which I was pretty happy with: I'm far more an audio guy than video, but I'd say your voice is waay too quiet in the first shot. Are you using an on-camera mic? I'd suggest (assuming a low budget here) that you get one of the smaller Zoom audio recorders and a lavalier (lapel) mic. It'll mean you'll have to synch in post but it'll make you sound a lot better. This would also allow you to do a walk-and-talk for shots like the one starting at 2:05. What kind of gear did you use for that time-lapse shot starting at 1:10? Some kind of improvised steadicam rig?
|
# ? May 2, 2017 11:05 |
|
|
# ? May 28, 2024 16:09 |
|
webmeister posted:So I've been doing a bunch more videos about World Heritage sites (mentioned earlier up the page). I feel like I'm getting in a fairly good groove with them, and I've got a much better idea of what I need to do and say while on location. But I'm just wondering if anyone else has advice or recommendations? This is a recent video I did which I was pretty happy with: - Avoid script fonts in general, but especially for web delivery. If someone plays your video from a thumbnail they can't read poo poo. - Audio is a tad wank in general. If you can't afford a zoom recorder like the other guy suggested, get a cheap lav mic for your cellphone and sync up in post. - First shot has waaay too much headroom. Framing is decent otherwise. - If you can bring a bounce card or a diffused LED light with you, it'll help a lot with shots like the one at 2:29. If not, turn around! You never want to shoot a subject in shadow against a window in full sunlight. - Bed music is as generic as it gets. Try and find something a little more interesting or unique. - Get more B-roll! You have a lot of opportunity for cool cutaways, take advantage of it. - Your delivery and enthusiasm are great, keep it up!
|
# ? May 2, 2017 19:38 |
|
Thanks both! A proper mic is definitely top of the shopping list, the main reason that I've held off buying one is simply because I wasn't sure initially how far I was going to take this project. But I'm well into it now so a mic is going to be purchase number one. With bounce cards, the only ones I'm really familiar with are the giant umbrella style ones from office/school portraits and the large foil ones that look like car windscreen shades. Does anyone have a recommendation for something that's fairly portable and useful when shooting with an iPhone? Point definitely taken about script fonts and the generic music! I had a real hard time finding (free and non-copyright) music that wasn't even more generic corporate muzak or dubstep. Guess I'll have another look though! Grand Prize Winner - that shot at 1:10 was actually done with the Hyperlapse app from Instagram. It does most the stabilization that my iPhone doesn't catch (though if you look closely in that shot you can still slightly see the bounce of my footsteps). Great app though, I'd recommend giving it a go if you want something quick and useful for time-lapse videography!
|
# ? May 2, 2017 20:50 |
|
Hey everyone, Not sure if this is the right place to post this but here goes. I'm in need of some advice about what to do next. I'm a freelance video editor who wasn't previously at a production house or any other post facility. I know, I know. This happened purely by accident as I came back to the UK from teaching abroad and wanted a career change. My friend who is a cameraman said that he was also doing the editing on a show and he hated it so he'd split the payment if I did the editing to free himself up for more camera work so that's how I got in rather than the much more frequent runner upwards route. Turns out that I love editing and if I didn't do it to make money, I'd probably do it in my free time so I've been trying my hardest to break into somewhere on a permanent basis. Since then (this was about 2-3 years ago) I moved back to a city I love - Bristol - but have found it really difficult to get consistent work. I've cut online content for some relatively well known brands (eBay, Amazon etc.) on behalf of a few post / animation houses here which has bolstered my CV a bit more. I got these jobs simply from cold calling and asking if they needed help either assistant editing / offline editing and they've all been happy with what I've done. In my free time I've learnt After Effects as well as Avid and will be focussing on getting fast at making motion graphics for quick turn-around projects when they come up as nearly everyone is asking for this. As I know networking is 90% the battle but I was just wondering what you guys think would be a good next step. Should I start at the bottom and work upwards in a post house or am I now too old (34)? Should I just hang in there which has been the advice of some of my full-time editing friends? Should I move to London (which is where I'm originally from) and try my luck there since there's a much denser amount of post facilities? My showreel is here and I'd really appreciate any feedback or advice. https://vimeo.com/203692386
|
# ? May 4, 2017 17:32 |
|
Any recommendations for a camera that does good 360° video for VR? I had a client ask about getting a 360° video for Oculus, and while it's something I'd like to get into there seems to be a new Kickstarter every week, with each new one promising to be the latest and greatest VR camera and totally not vaporware. I've been reading about the Vuze VR Camera, but it isn't due for release until June (and I'm admittedly very cautious of being an early adopter of any new cameras). And there's also the GoPro Fusion that was revealed at NAB, but again- not much is known about it, at this point. Suggestions?frytechnician posted:[snip] Your showreel is solid, by the way. I liked it. For a guy who's "new" to the industry you're off to a strong start. melon cat fucked around with this message at 14:58 on May 8, 2017 |
# ? May 8, 2017 14:04 |
|
The post industry is pretty forgiving with age. Most who I know are well into their sixties and still get work and have adapted to NLE suites and so on.
|
# ? May 8, 2017 23:41 |
|
Ok there's a fancy bug doing the rounds in the latest version of Premiere 17.1 where something misfires in the new cache cleanup setting and joyfully wipes everything that is your source footage. No one is actually sure what is causing this to occur. The main discussion appear to be here: https://forums.adobe.com/message/9503050#9503050 Looking through it appears by setting his Media Cache Files directory as root RAID and then his media cache database one level down he caused the program to see everything as a cache file and wipe en masse when clicking the clear cache button. Adobe's solution is to reset the cache to default and set it into another drive that's separate from your work file. There's a fix coming in the next week or so, so use this as a nice time to have backups at the ready.
|
# ? May 13, 2017 02:18 |
|
WebDog posted:The post industry is pretty forgiving with age. Most who I know are well into their sixties and still get work and have adapted to NLE suites and so on. The industry as a whole maybe, but post houses aren't really interested in older folks starting from the bottom. Also, if you're looking for edit work, post house aren't where you need to look, they just rent the rooms. You need to get into a production house.
|
# ? May 18, 2017 14:38 |
|
I was just tasked with finding some way to have a searchable database / inventory of all of our content. Prior to this point we've just used a Google Docs spreadsheet and relied on people putting any content they created in that and adding descriptions / tags to it and now my boss wants something more robust and (somehow) easier. I'm not entirely convinced we can actually get people to input the content they create (there are maybe 10 of us spread across 3 countries), but ideally it could be some sort of form that could easily be filled out and then stored in a database that anyone could search / edit. Any suggestions for software that may be able to do this?
|
# ? May 23, 2017 15:22 |
|
Asnorban posted:I was just tasked with finding some way to have a searchable database / inventory of all of our content. Prior to this point we've just used a Google Docs spreadsheet and relied on people putting any content they created in that and adding descriptions / tags to it and now my boss wants something more robust and (somehow) easier. I'm not entirely convinced we can actually get people to input the content they create (there are maybe 10 of us spread across 3 countries), but ideally it could be some sort of form that could easily be filled out and then stored in a database that anyone could search / edit. My co-worker is actually looking into FileMaker for our large database of content. Other than that, Adobe has MAM (Media Asset Management) that we used to use.
|
# ? May 23, 2017 17:41 |
|
Rusty Bodega posted:My co-worker is actually looking into FileMaker for our large database of content. Other than that, Adobe has MAM (Media Asset Management) that we used to use. Thanks, I'll research those.
|
# ? May 24, 2017 15:39 |
|
I have a stupid little question. I use Adobe Premiere pretty constantly for tons of editting needs. I always render using high quality outputs and it takes a long time (maybe its overkill but thats another discussion). I have a video clip of an interview I took. All I want to do is slice the beginning and end off to get rid of the mic checks and awkward camera sway. I don't need to re-render to a differnet FPS or resolution. What's the best way to do this in premiere? I want to retain all the quality of the original, I don't really even want it to re-render, I just want to lop parts of the video off. I hope this question makes sense.
|
# ? Jun 14, 2017 06:21 |
|
Knifegrab posted:I have a stupid little question. I use Adobe Premiere pretty constantly for tons of editting needs. I always render using high quality outputs and it takes a long time (maybe its overkill but thats another discussion). You don't even need to use Premiere, you can do it in media encoder. Just go to export settings, set your in and out points, make sure the container is right that it's set to match source for the codec (it should do this by default) and you're done. Should export quickly too. e: alternatively, if it's just h264 then you can use MPEG streamclip which is free and easy as setting in and out points and hitting trim. Lizard Combatant fucked around with this message at 06:33 on Jun 14, 2017 |
# ? Jun 14, 2017 06:28 |
|
Lizard Combatant posted:You don't even need to use Premiere, you can do it in media encoder. Just go to export settings, set your in and out points, make sure the container is right that it's set to match source for the codec (it should do this by default) and you're done. Should export quickly too. Thank you, this looks perfect. Follow up question, what is the main difference between muxed and demuxed mp4s? I keep seeing those terms and have no idea what they mean.
|
# ? Jun 14, 2017 07:34 |
|
Knifegrab posted:Thank you, this looks perfect. Follow up question, what is the main difference between muxed and demuxed mp4s? I keep seeing those terms and have no idea what they mean. Basically muxed just means various streams combined into a single file (ie, the mp4 container), it's your video, audio, subs, etc... What are you using that asks you to select muxed or demuxed?
|
# ? Jun 14, 2017 07:55 |
|
Lizard Combatant posted:Basically muxed just means various streams combined into a single file (ie, the mp4 container), it's your video, audio, subs, etc... Oh nothing at the moment. I just keep hearing it. Btw I am away from my work machine (getting footage) and I just realized, my files I think are saved on my dslr as .mov's. Is there a program like mpeg streamclip for mov?
|
# ? Jun 14, 2017 16:20 |
|
Knifegrab posted:Oh nothing at the moment. I just keep hearing it. Streamclip should work fine with mov (the container) unless the codec (the actual video) is not supported, such as prores. Do you know what codec you're using? If not, what camera have you shot it on? And finally, Windows or Mac?
|
# ? Jun 15, 2017 00:07 |
|
Lizard Combatant posted:Streamclip should work fine with mov (the container) unless the codec (the actual video) is not supported, such as prores. Do you know what codec you're using? If not, what camera have you shot it on? And finally, Windows or Mac? 70D. Windows. Also one other unrelated question. Can I export a sequence somewhere in premiere to me used in other places? Not like render it out, but just save the sequence on some Central place. Previously I open the old project, copy the sequence, open the new project and paste the sequence and that works but is a hassle.
|
# ? Jun 15, 2017 20:32 |
|
Knifegrab posted:70D. Windows. Or did you mean export it as a file for another program? Exporting as an XML can do that.
|
# ? Jun 15, 2017 21:39 |
|
Knifegrab posted:70D. Windows. 1. Ok cool, you should be fine with streamclip. 2. What WebDog said.
|
# ? Jun 16, 2017 00:40 |
|
WebDog posted:Yes if you select the sequence in your project bin. Under file > Export you can pick Selection as Premiere project. I have it selected in the project bin. But under file -> export I only see the options: Media, EDL, AAF and Final Cut Pro XML. I don't see "Selection" And no this is for importing into another project within premiere, not another program.
|
# ? Jun 16, 2017 03:43 |
|
I suspect you might be using an older version of Premiere. This what you should be seeing with the sequence selected. Notice the Bin panel is highlighted blue and is active. Clicking export with other panels or the timeline active will grey out these options. Alternatively if you have a sequence you want to import into a fresh project, you can use the Media Browser window to navigate to where the project file is and then via dynamic linking import a select sequence and it's files in. You can also do cool things like reference another sequence in read only mode which then can be refreshed to update any changes.
|
# ? Jun 16, 2017 06:30 |
|
I'm looking to set up a network environment for (4) video editors to link to and work from. Mixed media up to 4k, editing with Premiere. Anybody have any recommendations for a NAS or something similar?
|
# ? Jun 16, 2017 15:08 |
|
magiccarpet posted:I'm looking to set up a network environment for (4) video editors to link to and work from. Mixed media up to 4k, editing with Premiere. How much storage do you need? We have this exact setup with a QNAP with 10GbE connections. Basically each machine's office is wired for 10GbE that goes to a 10GbE switch that's connected to the QNAP with 100TB of storage (50TB that backs up to a mirrored 50TB partition). We work in Premiere with up to 6K footage pretty drat flawlessly. I'll get the exact models today.
|
# ? Jun 16, 2017 15:19 |
|
Surely just a coincidence?
|
# ? Jun 18, 2017 06:36 |
|
melon cat posted:Any recommendations for a camera that does good 360° video for VR? I had a client ask about getting a 360° video for Oculus, and while it's something I'd like to get into there seems to be a new Kickstarter every week, with each new one promising to be the latest and greatest VR camera and totally not vaporware. I've been reading about the Vuze VR Camera, but it isn't due for release until June (and I'm admittedly very cautious of being an early adopter of any new cameras). And there's also the GoPro Fusion that was revealed at NAB, but again- not much is known about it, at this point. Suggestions? I bought the LG 360 cam. Pretty decent 360 video camera. Only downfall or annoyance is that it stores the videos onboard the camera and the only way to transfer them is through your phone...
|
# ? Jun 19, 2017 14:38 |
|
BonoMan posted:How much storage do you need? We have this exact setup with a QNAP with 10GbE connections. Basically each machine's office is wired for 10GbE that goes to a 10GbE switch that's connected to the QNAP with 100TB of storage (50TB that backs up to a mirrored 50TB partition). I think 30tb is sufficient, as the material will be quickly backed up and pushed to another network.
|
# ? Jun 20, 2017 17:47 |
|
I have a static descriptor title in my adobe premeire in the top left, I am trying to get a line to point from the text to an object in the scene. That is easy enough but I want the line to stay fixed at the description but follow the object in the scene. I know I can do this by painstakingly rotating and scaling the line but that seems like a nightmare on this long of a clip. Is there any easy way to make a line anchored on one side but following an object on the other? I know how to do keyframe motioning so I know how to get something to follow but I don't know how to get something to dynamically "stretch" like this easily. I do not have after effects unfortunately
|
# ? Jul 15, 2017 22:17 |
|
Bad news: that sort of thing is what After Effects was made for.
|
# ? Jul 15, 2017 22:36 |
|
Chitin posted:Bad news: that sort of thing is what After Effects was made for. Welp time to jump off a bridge
|
# ? Jul 15, 2017 23:36 |
|
Knifegrab posted:Welp time to jump off a bridge At the very least, have you moved the anchor point of the line to the text end? That way you worry about rotation and length. Does it need to look like it's perfectly tracking the object? Or just generally pointing at it. If it's the latter then you can do an OK job in premiere. I'd start by key framing the first and last frames, then one right in the middle, then half way between the first and middle and the middle and last, then half way between those, etc... Keep adding points half way until it looks OK. If it needs to look tracked... Can you get after effects? Free trial, back of a truck?
|
# ? Jul 16, 2017 03:20 |
|
Lizard Combatant posted:At the very least, have you moved the anchor point of the line to the text end? That way you worry about rotation and length. Or pay a $30 one month rental fee. Sucks to do it for just one effect, but it's a solution!
|
# ? Jul 16, 2017 14:14 |
|
BonoMan posted:Or pay a $30 one month rental fee. Sucks to do it for just one effect, but it's a solution! No, send it to me. I'll do it for $29.
|
# ? Jul 16, 2017 15:50 |
|
Lizard Combatant posted:No, send it to me. I'll do it for $29. I'll do it for $28
|
# ? Jul 16, 2017 16:32 |
|
BonoMan posted:I'll do it for $28 $27.50!
|
# ? Jul 17, 2017 02:37 |
|
Lizard Combatant posted:$27.50! $1 Are we on the Price is Right?
|
# ? Jul 17, 2017 02:54 |
|
There you go Knifegrab, you can't get a better deal than that. Mods please enforce.
|
# ? Jul 17, 2017 03:57 |
|
Name that tune!
|
# ? Jul 18, 2017 01:25 |
|
Is there a video editing reason to use a computer monitor over an HDTV? I need a new monitor and might just go for a TV since they're cheaper and don't seem to be that different settings-wise.
|
# ? Aug 12, 2017 22:16 |
|
|
# ? May 28, 2024 16:09 |
|
Monitors can have wider colour gamuts. A HDTV is often locked off at colourspace called Rec.709. Basically you can't broadcast 1:1 colour information as it's too much info. So the full range is limited to a middle ground that is palatable. But many consumer cameras will shoot in 709 as it's much faster to process the bare minimum of colour ranges than the whole lot. And it saves on data. If you're just cutting YouTube stuff or holiday videos then an HDTV isn't going to be a major issue. But there are some caveats. Professionally we use monitors calibrated to 709 to test how our footage would look as ungraded footage is often grey before we pass it through a look up table to make it look "right". We swap back to the full range for accuracy in grading and finishing. Despite finishing in 709 for most things if we tried to grade 709 straight, you'll run into issues as the colour ranges are limited and clipped. Blacks will look too black etc etc and can't get lifted. However nothing wrong with using a TV for external display if you're cutting consumer stuff. But you have to realise you may also have scaling issues as most graphic cards will struggle to output over 3K smoothly so the image may be blown up. And then working out how to calibrate the TV to look correct as most try to pretty up their image with sharpness or frame interpolation.
|
# ? Aug 13, 2017 00:19 |