|
Dave Inc. posted:That poo poo looks rad. Nice job. Thanks!
|
# ? Jun 7, 2017 14:31 |
|
|
# ? Jun 13, 2024 04:41 |
|
chrisgt posted:There's no such thing as a simple plumbing repair on a house.... The second you touch the broken part, you break the next part upstream, and when you go to fix that..... Yea, I hate working on houses. That's the amazing thing about water. Don't have it for a few days you die. But within 5 minutes it can gently caress your poo poo up.
|
# ? Jun 7, 2017 19:03 |
|
Colostomy Bag posted:That's the amazing thing about water. Don't have it for a few days you die. But within 5 minutes it can gently caress your poo poo up. I hate plumbing simply because water is so insistent on escaping, and can do so much damage so quickly.
|
# ? Jun 7, 2017 23:23 |
|
Darchangel posted:I hate plumbing simply because water is so insistent on escaping, and can do so much damage so quickly. Yeah, and great with water pumps. Getting back on topic, replaced a bunch of lift supports. Some you can do on your own...but the tailgate of a WJ was not of them. Colostomy Bag fucked around with this message at 00:20 on Jun 8, 2017 |
# ? Jun 8, 2017 00:15 |
|
I figured out why my high beams weren't working with this new Putco harness on the XJ
|
# ? Jun 8, 2017 01:40 |
|
ewiley posted:
Now that's a neat trick. For content: my Maverick just got painted and oh god I'm gonna poo poo myself. Should have it back middle of next week at which point there will be a proper flood of pictures.
|
# ? Jun 8, 2017 02:31 |
|
Got some shocks (struts?) in the mail today, and prepped the MR2 for the dreaded replacement job.
|
# ? Jun 8, 2017 03:16 |
|
Garage2Roadtrip posted:Got some shocks (struts?) in the mail today, and prepped the MR2 for the dreaded replacement job. Gabriel shocks? I've never had good luck with those, or do they actually make a quality line? I put them on a subaru once and completely blew them on the test drive (an abusive test drive...).
|
# ? Jun 8, 2017 11:42 |
|
chrisgt posted:Gabriel shocks? I've never had good luck with those, or do they actually make a quality line? I put them on a subaru once and completely blew them on the test drive (an abusive test drive...). Honestly, I don't know. From reading the MR2OC boards and such the Gabriel units are considered OEM+ which is what I wanted to achieve. Thankfully the duty cycle of a MR2 strut is a fair bit different than that of a Subaru in capable hands.
|
# ? Jun 8, 2017 15:27 |
|
Colostomy Bag posted:Yeah, and great with water pumps. Too heavy, I'm guessing? Or the struts too strong for one person to collapse to install? Not something I've tried. My XJ had new hatch struts when I got it, and even so was one of the earlier ones with the GRP hatch, rather than the '97+ steel one. Only other thing I've replaced the struts on is my first-gen RX-7, which is just the one piece of glass. ewiley posted:
Supposed to be a ground for the relay, I assume?
|
# ? Jun 8, 2017 22:25 |
|
My lift came with a couple different sizes of lifting blocks, so I decided to throw some taller ones on so I could take the bellypan off the MR2 And then procrastinating on doing the new shocks (shut up, I'll do them tomorrow), I installed two new e-brake cables. Here's one old one out and replaced, and the other new one ready to go in.
|
# ? Jun 8, 2017 22:38 |
|
Need some lift details. Haven't seen one like that before with what appears to be one side fixed to the floor and rollers on the other. How high does it go and how low is your ceiling?
|
# ? Jun 9, 2017 02:40 |
|
Larrymer posted:Need some lift details. Haven't seen one like that before with what appears to be one side fixed to the floor and rollers on the other. How high does it go and how low is your ceiling? It's a Bend-Pak MD-6XP. Nothing is fixed to the floor, it is free standing. One side rolls the other stays stationary. Can be moved super easy, only needs 120VAC. https://www.amazon.com/gp/product/B00KZJECHS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 My ceilings are about 9' and I could push the Audi through the ceiling if I go above the third (and final) stop.
|
# ? Jun 9, 2017 05:07 |
|
Garage2Roadtrip posted:It's a Bend-Pak MD-6XP. Nothing is fixed to the floor, it is free standing. One side rolls the other stays stationary. Can be moved super easy, only needs 120VAC. I am just drooling over this but man, I can't justify $2K on it when all I do are oil changes and wheel swaps.
|
# ? Jun 9, 2017 06:01 |
|
Rhyno posted:I am just drooling over this but man, I can't justify $2K on it when all I do are oil changes and wheel swaps. yeah but think of how much quicker your wheel swaps got when you got an electric impact driver. now half that time because you dont have to jack/drop the car 4 times.
|
# ? Jun 9, 2017 06:23 |
|
Stop taunting me! When I was a kid my grandfather had something called "siderail jacks" or something. It was essentially a long iron L bar that sat under the front and rear jack points and you could lift the whole side of the car up and get the jack stands under the front and rear, then go to the other side and do the same. Took about 5 minutes to get the whole car in the air. Is there anything like that on the market today?
|
# ? Jun 9, 2017 08:04 |
|
Rhyno posted:Took about 5 minutes to get the whole car in the air. I can do it quicker than that with my shop jack.
|
# ? Jun 9, 2017 08:55 |
|
Man I want a lift something fierce because I can convince myself that I'll do all sorts of stuff if I only had the tools. Worked for an air compressor and sand blaster why not a lift? Especially since I have to tackle the Tracker's oil pan at some point. As for what I did today a lift wouldn't have been that helpful. When good solenoids go bad. About 2 weeks ago when I went to pull away from a stop light my van started sputtering. Right away my heart sinks and I starting getting all worried because here I am daily driving a thing that I must repair myself. Turns out that there are two solenoids that control various air fuel mixtures within the carb depending where the engine is at at idle. 60 bucks for both solenoids (even though only one was bad might as well replace them both) and a week for shipping and a bit over two hours and the van runs great again. I'm so loving proud of myself since this van is pushing me to do things I'd never do on my own out of necessity.
|
# ? Jun 9, 2017 09:02 |
|
Olympic Mathlete posted:I can do it quicker than that with my shop jack. I should have been clear, like 5 minutes to jack up one side, toss the jack stands under then around to the other side to get those stands up and in place.
|
# ? Jun 9, 2017 09:13 |
|
KakerMix posted:I'm so loving proud of myself since this van is pushing me to do things I'd never do on my own out of necessity. That's so awesome. As time goes on you'll be even more shocked by the evolution of projects you're willing to take on. I still live in that state of DIY necessity, since I simply couldn't afford to take my vehicles to someone to fix. Rhyno posted:I am just drooling over this but man, I can't justify $2K on it when all I do are oil changes and wheel swaps. It's definitely a big purchase. My justification at the time was that a) I had the money and b)I'd be doing a lot of work on a lot of different cars. There was a lot of time that I wanted a lift when I was doing stuff at my previous house, like angle gear swap on an S60R, d/s center bearing and guibo on an E46, half shafts on a Justy, full front suspension rebuilds on the S60R and B6 Ultrasport where a lift would have been indispensable. I use that thing pretty much every time I'm in the garage. I agree, though, 90% of the stuff I'm doing is perfectly fine on jackstands, I used to have to do that myself. It just would have been nice to not have to lay under either of these for a month of my life it felt like:
|
# ? Jun 9, 2017 13:48 |
|
Garage2Roadtrip posted:It's a Bend-Pak MD-6XP. Nothing is fixed to the floor, it is free standing. One side rolls the other stays stationary. Can be moved super easy, only needs 120VAC. Thanks for the info. Looks like something that might work for me since I have lovely weak electrical (one outlet on the ceiling for the garage door that doesn't trip the breaker for my compressor/welder, the only other outlet does randomly ) in my garage, and it's a very small 2 car so any work I do I move a car out and work in the middle for space. How easy it it to move that thing around? Seems like it has a built in dolly but I imagine it's still heavy and needs a smooth floor to roll well.
|
# ? Jun 9, 2017 14:02 |
|
Brake light came on in the Golf but I'd only replaced the pads maybe a year or so ago. Checked and the wires coming out of the pad to the sensor had broken. Twisted/taped/zip-tied them back together and the light's out.
|
# ? Jun 9, 2017 15:31 |
|
scuz posted:Brake light came on in the Golf but I'd only replaced the pads maybe a year or so ago. Checked and the wires coming out of the pad to the sensor had broken. Twisted/taped/zip-tied them back together and the light's out. Heck yeah. My B6 had the light that took over my whole cluster. Checked out all the pads and they spec'd good, so I just built a shorting plug for all four pigtails.
|
# ? Jun 9, 2017 15:51 |
|
Darchangel posted:Too heavy, I'm guessing? Or the struts too strong for one person to collapse to install? Not something I've tried. My XJ had new hatch struts when I got it, and even so was one of the earlier ones with the GRP hatch, rather than the '97+ steel one. Only other thing I've replaced the struts on is my first-gen RX-7, which is just the one piece of glass. Eh, one of the supports were stuck. I could only open the gate about 4 inches without feeling like I would break something. Probably could have gotten by with a block of wood and a jack handle to support...but combined with the fact these are actually held in with torx bolts and the wisdom of old age it was looking like a recipe for disaster if I tried it solo. I know Autozone and the likes need to make money and they sell convenience. But the lift supports on Rock Auto were $11 versus $35 at the store. Adds up when you have to replace 6.
|
# ? Jun 9, 2017 16:00 |
|
Put some Rally Armor mudflaps on the RS today.
|
# ? Jun 9, 2017 18:57 |
|
Huge_Midget posted:Put some Rally Armor mudflaps on the RS today. Thank you for driving something cool and different in Allen county.
|
# ? Jun 9, 2017 21:29 |
|
KakerMix posted:Man I want a lift something fierce because I can convince myself that I'll do all sorts of stuff if I only had the tools. Worked for an air compressor and sand blaster why not a lift? Especially since I have to tackle the Tracker's oil pan at some point. That carb setup looks fairly nasty. Good work on fixing it!
|
# ? Jun 10, 2017 04:42 |
|
Honda carbs can eat a bag of dicks. They're great when they work right, and a complete oval office when they act up. KakerMix's looks quite a bit simpler (I'm guessing Japan emissions laws didn't require nearly as much poo poo), but I'll just leave this vacuum line diagram for my old 88 Accord here. The only "nice" thing about it was every vacuum line had a number printed on it (you can see some of them in Kaker's pics). But when you're working on something that old, generally half the lines have been replaced, or capped off, or left dangling, or they shatter if you look at them funny, or... randomidiot fucked around with this message at 09:23 on Jun 10, 2017 |
# ? Jun 10, 2017 09:21 |
|
The 80's were truly the golden years for engineers working on automotive vacuum systems. I wonder why (and some mfgs more than others) there was such a push for that, versus solenoid/motor control?
|
# ? Jun 10, 2017 14:34 |
|
angryrobots posted:The 80's were truly the golden years for engineers working on automotive vacuum systems. The technology didn't exist cheaply and miniature enough, and carburetors had really reached the peak attempting to be able to control mixture of exhuast gasses without feedback loops (we did get those in the 80s) Ten years later the same EGR valves and solenoid valves were used, but strapped to fuel injection and rendering a lot of the system irrelevant. A lot of that vacuum system is to control the exhaust mixture during transient throttle operations, lean out cruise, and generally try to finagle the carburetor into staying inside of operating parameters with drastic changes in air/fuel/carb temperature, air density changes, etc.
|
# ? Jun 10, 2017 14:46 |
|
The Accord that the vacuum diagram is from had a feedback carb - it had the worst of both worlds!
|
# ? Jun 10, 2017 21:21 |
|
Meanwhile the Japanese market Accord had a PGMFi DOHC 2l which I'm pretty sure would have been better for emissions, especially a few years down the track when all that vacuum stuff started failing.
|
# ? Jun 10, 2017 23:23 |
|
dissss posted:Meanwhile the Japanese market Accord had a PGMFi DOHC 2l which I'm pretty sure would have been better for emissions, especially a few years down the track when all that vacuum stuff started failing. Didnt change poo poo. the EFI A series had a pile of solenoids too. EFI was an option here. same for the preludes of the era.
|
# ? Jun 10, 2017 23:36 |
|
Got my new plate on today.
|
# ? Jun 11, 2017 00:31 |
|
Imperador do Brasil posted:Got my new plate on today. rip SLORICE
|
# ? Jun 11, 2017 02:43 |
|
Raluek posted:rip SLORICE Witness me! SLORICE isn't going anywhere. Imperador do Brasil fucked around with this message at 03:01 on Jun 11, 2017 |
# ? Jun 11, 2017 02:57 |
|
cursedshitbox posted:Didnt change poo poo. the EFI A series had a pile of solenoids too. EFI was an option here. same for the preludes of the era. The B20a which was in the Japanese cars didn't seem to be anywhere near as bad
|
# ? Jun 11, 2017 02:59 |
|
Imperador do Brasil posted:Got my new plate on today. this is beautiful
|
# ? Jun 11, 2017 03:20 |
|
Rhyno posted:this is beautiful +1
|
# ? Jun 11, 2017 03:54 |
|
|
# ? Jun 13, 2024 04:41 |
|
Yu-Gi-Ho! posted:Honda carbs can eat a bag of dicks. They're great when they work right, and a complete oval office when they act up. That diagram would be a dope wall poster if it was higher res.
|
# ? Jun 11, 2017 19:18 |