|
If anyone wants a deal and doesn't mind a slightly worn ABS spacebar, I want to sell:
I'm willing to ship, but these would be super cheap to anyone in Toronto.
|
# ? Aug 12, 2017 01:57 |
|
|
# ? May 30, 2024 12:14 |
|
My old K65 is still in service, just not with me. My k70 has been strong for however long they’ve been out. I think you’ll get tired of it before it breaks (isn’t that true of most mechanicals?)
|
# ? Aug 12, 2017 02:30 |
|
teethgrinder posted:I'm willing to ship, but these would be super cheap to anyone in Toronto. I live in Toronto and am PMing you!
|
# ? Aug 12, 2017 03:18 |
|
Dogen posted:My old K65 is still in service, just not with me. My k70 has been strong for however long they’ve been out. I think you’ll get tired of it before it breaks (isn’t that true of most mechanicals?) I killed the Razer, but they're not known for great build quality and again, I'm a klutz.
|
# ? Aug 12, 2017 03:22 |
|
Razer makes awful keyboards.
|
# ? Aug 12, 2017 03:51 |
|
My black widow from 2008 survived me spilling milk all over it and only recently have the switch springs started to not bounce back causing letters to get doubled Their mice, though, were really bad
|
# ? Aug 12, 2017 05:26 |
|
FAT32 SHAMER posted:My black widow from 2008 survived me spilling milk all over it and only recently have the switch springs started to not bounce back causing letters to get doubled Boomslang 4 lyfe man!
|
# ? Aug 12, 2017 09:13 |
|
The Unlife Aquatic posted:Razer makes awful ftfy. The Razer Headphones and Xbox controllers I bought died within months of purchase. Only their Hydra motion controller lasted any time at all, and its only redeeming factor was that I sold it someone for more money than I bought it for.
|
# ? Aug 12, 2017 11:56 |
|
teethgrinder posted:If anyone wants a deal and doesn't mind a slightly worn ABS spacebar, I want to sell: Pm'd!
|
# ? Aug 12, 2017 12:35 |
|
https://www.youtube.com/watch?v=QCwsIFnzBrc I uploaded a typing test of the 30g Realforce 10th Anniversary I had. This was on SoundCloud which is going to explode soon, so I wanted to preserve it. I also have one of the Type-S in there somewhere but there are probably better videos to reference since it's a way more common keyboard.
|
# ? Aug 12, 2017 18:56 |
|
Topre switches make the most relaxing sound.
|
# ? Aug 12, 2017 19:00 |
|
The Unlife Aquatic posted:Topre switches make the most relaxing sound. My work board is a Novatouch with hyper sphere rings and a set of Maxkey's SA Ninja. Thock thock thock
|
# ? Aug 12, 2017 22:02 |
|
Is there anywhere still stocking the FC660C which doesn't have ridiculous shipping? I want to get one for around the $200-220 mark if possible, just to try.
|
# ? Aug 13, 2017 01:35 |
|
Megalixir posted:Is there anywhere still stocking the FC660C which doesn't have ridiculous shipping? I want to get one for around the $200-220 mark if possible, just to try. https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1495 ? https://www.amazon.com/Leopold-66-key-Electrostatic-Capacitive-Keyboard/dp/B00EI52VCS
|
# ? Aug 13, 2017 01:37 |
|
The Unlife Aquatic posted:Topre switches make the most relaxing sound. https://www.youtube.com/watch?v=arJnNM5RAMM
|
# ? Aug 13, 2017 04:58 |
|
Who has to die for me to get one of these?
|
# ? Aug 13, 2017 05:02 |
|
Holy poo poo it's like rain against a window
|
# ? Aug 13, 2017 05:27 |
|
Nondescript Van posted:https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1495 ? Thanks but neither of these ship internationally at sane prices. The Unlife Aquatic posted:Who has to die for me to get one of these? The closest I can think of is buying a preassembled Tada68 on Aliexpress with Zealios switches in 78g, it will run you $145 for a standard board or $215 with an aluminum one. https://www.aliexpress.com/item/Tad...sAbTest=ae803_1 I have a Tada and they're great.
|
# ? Aug 13, 2017 21:57 |
|
Megalixir posted:Thanks but neither of these ship internationally at sane prices. oh you're in new zealand. that's rough. you could try taobao.com but it may be hard to find a reputable seller. superbuy is a proxy service which is usually the easist way to order from sites like taobao. I found this link: https://www.superbuy.com/en/page/buy/?url=%2F%2Fitem.jd.com%2F11950222811.html The site (jd.com) is basically like taobao. This appears to be leopold's official online store in the area. this is a direct link to their listing https://item.jd.com/11950222812.html price is $225 USD I've never used them or really heard of them but it's all I could find. Nondescript Van fucked around with this message at 04:27 on Aug 14, 2017 |
# ? Aug 14, 2017 04:12 |
|
Megalixir posted:https://www.youtube.com/watch?v=QCwsIFnzBrc God drat I need me some cup rubber
|
# ? Aug 14, 2017 05:03 |
|
For people who want a nice PBT set for a standard layout board without spending heaps of money and then waiting 30 years for them, the Tai-Hao purple/grey sets might be worth a look. There's a few nice options, the black on black mods actually look pretty great. https://www.massdrop.com/buy/tai-hao-purple-pbt-doubleshot-keycap-set
|
# ? Aug 14, 2017 09:20 |
|
The Deadly Hume posted:For people who want a nice PBT set for a standard layout board without spending heaps of money and then waiting 30 years for them, the Tai-Hao purple/grey sets might be worth a look. There's a few nice options, the black on black mods actually look pretty great. These are the caps I'm currently using and they've been quite nice.
|
# ? Aug 14, 2017 22:13 |
|
Not bad for my first group buy. XD84/EEPW84 PCB, bent steel plate, acrylic diffuser, Gateron Brown switches and some Aliexpress PBT keycaps. 8-bit Miniboss fucked around with this message at 22:29 on Aug 14, 2017 |
# ? Aug 14, 2017 22:27 |
|
Nice, I've been really liking the 75% layout lately. So much so that I don't know if I'll be going back to a TKL by the time my K-Type arrives, lol.
|
# ? Aug 14, 2017 23:33 |
|
Massdrops ergodox infinity was supposed to ship five days ago, no updates, and support will only give a form letter, and an offer to cancel
|
# ? Aug 15, 2017 00:26 |
|
blugu64 posted:Massdrops ergodox infinity was supposed to ship five days ago, no updates, and support will only give a form letter, and an offer to cancel My Planck was supposed to ship at the end of June ;_;
|
# ? Aug 15, 2017 01:11 |
|
I'm currently in the market for my first mechanical keyboard. I've spent more time than I care to admit trying to narrow it down to the following: MK Fission (PBT keycaps / Brown Cherry MX) Ducky Shine 6 (PBT keycaps / Brown Cherry MX) Is the difference between build and feel negligible enough that it comes down to whether or not I would like RGB key lighting? Is there any tangible benefit to RGB lighting other than to match the lighting on my gaming mouse, my gaming case/fans, and my gaming GPU? I'm leaning toward the MK Fission as I think I would prefer simple white lighting. I would ideally replace the keycaps at some point down the road with some of the sets that have been posted here but it looks as though both boards would allow me to do that very easily.
|
# ? Aug 16, 2017 12:46 |
|
frailimbnursry posted:I'm currently in the market for my first mechanical keyboard. I've spent more time than I care to admit trying to narrow it down to the following: rgb is only for show, white lighting is really nice for when it's dark in your room and you're too lazy to go turn the light on
|
# ? Aug 16, 2017 13:58 |
|
The Deadly Hume posted:For people who want a nice PBT set for a standard layout board without spending heaps of money and then waiting 30 years for them, the Tai-Hao purple/grey sets might be worth a look. There's a few nice options, the black on black mods actually look pretty great. Bugger it, no ISO
|
# ? Aug 16, 2017 15:47 |
|
Realistically, it shouldn't be that hard to ultra nerd out and make your own keyboard from the ground up right? I would be mostly worried about getting the frame and the mechanical parts. In terms of the pcb I could easily draw it up and hand-etch a prototype and get it manufactured at a later date. Does anyone have a clue how much it would cost to get the mech supplies? Is it even worth it to nerd out as an EE or should I just say gently caress it and buy a mechanical keyboard and save myself the trouble. I don't have one yet and I'm thinking of getting one in the near future.
|
# ? Aug 16, 2017 15:50 |
|
Knowlue posted:Realistically, it shouldn't be that hard to ultra nerd out and make your own keyboard from the ground up right? I would be mostly worried about getting the frame and the mechanical parts. In terms of the pcb I could easily draw it up and hand-etch a prototype and get it manufactured at a later date. Does anyone have a clue how much it would cost to get the mech supplies? Is it even worth it to nerd out as an EE or should I just say gently caress it and buy a mechanical keyboard and save myself the trouble. I don't have one yet and I'm thinking of getting one in the near future. It would be a fun project, when I looked into doing the same the switches alone would have been about $100 for 104 clear switches, and the only reason i didnt do it is because a PCB for me would have been around 114$
|
# ? Aug 16, 2017 16:17 |
|
FAT32 SHAMER posted:It would be a fun project, when I looked into doing the same the switches alone would have been about $100 for 104 clear switches, and the only reason i didnt do it is because a PCB for me would have been around 114$ Jesus christ. How many layers and how big is the board? And where are you from? I've ordered a lot of boards over the past few years and a full 100 sq inch 2 layer panel is about 115
|
# ? Aug 16, 2017 16:26 |
|
Knowlue posted:Jesus christ. How many layers and how big is the board? And where are you from? I've ordered a lot of boards over the past few years and a full 100 sq inch 2 layer panel is about 115 https://www.massdrop.com/buy/zealpc-r2-zeal60-rgb-led-pcb With the cost of switches i think the manufacturers must get some wicked deals on the PCB
|
# ? Aug 16, 2017 16:34 |
|
FAT32 SHAMER posted:idk, i live in the us Yeah ok that makes sense. The board is prefab and populated. It's not terrible in cost I guess. I usually end up paying for about 5 per square inch for two layers. I'd have to do more research in terms of the parts needed but the passive components cost is peanuts, and the controller shouldn't be more than 20. Not a terrible deal I guess all in all but I'm either going to do everything myself or buy an entire keyboard already made. I'd have to do more than a cursory research on my phone before I proceed
|
# ? Aug 16, 2017 16:48 |
|
Knowlue posted:Realistically, it shouldn't be that hard to ultra nerd out and make your own keyboard from the ground up right? I would be mostly worried about getting the frame and the mechanical parts. In terms of the pcb I could easily draw it up and hand-etch a prototype and get it manufactured at a later date. Does anyone have a clue how much it would cost to get the mech supplies? Is it even worth it to nerd out as an EE or should I just say gently caress it and buy a mechanical keyboard and save myself the trouble. I don't have one yet and I'm thinking of getting one in the near future. I think the biggest hurdle would be sourcing the materials for your case/frame and if you need to do any CNC work done. If you're handcrafting it, then it should be pretty cheap, just takes up a whole lot of time. You don't need a PCB since you can hand wire it and use a teensy board. As for switches, they're relatively cheap at about $0.30 a switch and you have a whole lot of choices out there based on your preferences. (Whereas with prebuilds, they mostly use Cherry switches, which are pretty meh outside of Clears and has fallen out of favour with most enthusiasts) The exception are Zealios switches which can run you at about $0.75 to a dollar per switch. It's a pretty good project to build one from scratch, but there's also a lot of available kits and parts out there that saves you a lot of time and trouble. It's not a full build from the ground up, (you're essentially just screwing things and soldering things together) but can still be a pretty fun project. EDIT: Also, the cost of the Zeal60 is kind of a bad example. The reason why it's that expensive is due to ZealPC charging that much due to the board being fully programmable, RGB and I believe locally sourced? Not too sure on that. A non-RGB but programmable 60% PCB from China like the Satan GH60 is about $30. Honestly, the major money sinkhole in this drat hobby is keycaps. Constellation I fucked around with this message at 19:53 on Aug 16, 2017 |
# ? Aug 16, 2017 19:47 |
|
Constellation I posted:I think the biggest hurdle would be sourcing the materials for your case/frame and if you need to do any CNC work done. If you're handcrafting it, then it should be pretty cheap, just takes up a whole lot of time. Yeah agreed. Half the time pcb is overdoing it. But frankly I would be making a mk from scratch for the satisfaction of designing and populating another board. Wiring and everything else is a chore for me. The electrical engineer in me is too much of a nerd to not make a board. That being said I'll have to look if I want to go through with it given time and effort or if I prefer to buy a good one. In any case I could potentially have access to a cnc so I'm not too worried there. I'll keep the thread posted
|
# ? Aug 17, 2017 05:49 |
|
Soooooooooo... I'm ending up with no usable mech keyboards after selling a couple here (though the Das with Greetech Browns is still up for grabs) and waiting at least a month for a new one from Massdrop. Brother lent me a Pok3r in the meantime ... he has more keyboards than devices hah. Put on some laser-etched PBT caps. I quite like the look! Just wanted to say, the Poker 3 isn't exactly the huge upgrade over the 2 that I assumed it would be. The main improvements are ... heavier, three layers of programmability + 31 keys per macro. But it's just not as elegant as the 2. On the 2 you have the default Fn commands layer, and activate macros with the Pn button + selected keystroke. On the 3 you have to programme macros on a custom selectable layer to Fn + key, so you lose the default Fn functionality. This is kind of a pain in the rear end as many/most are pretty necessary, i.e. F1-F12 ... home/end/cursors, etc. As well the Poker 2 mapped cursors to WASD which is far more intuitive to me and easier to reach than the 3 putting them on IJKL. Stuff like home/end is more logical on the 2 to me as well.
|
# ? Aug 17, 2017 06:24 |
|
Thinking of canceling my ergodox order and getting a refurb advantage2 for $40 more. Good idea/bad idea? I want layers, programmability, and comfort. The more poo poo I can stick on an alternate layer and hit one button for the better.
|
# ? Aug 18, 2017 02:44 |
|
blugu64 posted:Thinking of canceling my ergodox order and getting a refurb advantage2 for $40 more. Good idea/bad idea? I want layers, programmability, and comfort. The more poo poo I can stick on an alternate layer and hit one button for the better. https://mehkee.com/collections/featured-home-page/products/lets-split-acrylic-cases-kits?variant=46981199311 ?
|
# ? Aug 18, 2017 02:49 |
|
|
# ? May 30, 2024 12:14 |
|
Since I work with a lot of EEs and embedded dudes they are all looking at building their own keyboard and holy poo poo is it tempting There's no way I can justify spending $215 on a pcb + 78g zelios + a case Why did I start reading this dang thread
|
# ? Aug 18, 2017 03:10 |