|
Doubtful that I'm gonna sell any. poo poo's more expensive than anticipated, with what low amount of parts making things expensive. A controller's guesstimated ~100€ for 6 PWMs, 2 UARTs and 2 ADCs. There's nothing else on it, other than the four rotated gyros. I'll eventually upload the KiCAD files, if it actually works. (--edit: Actually I only planned two boards. One on the desk for testing stuff, and one for flying. Why they shipped me a third board, I'm not sure. Glad I ordered spare components though.) Yea, F4, and dRonin. If the multigyro stuff works and improves the SNR, I'm probably gonna port the Airbot Streak F4 to dRonin, if it has dedicated CS lines to the gyros. Thing has a MPU-6500 and an ICM-20602 on it and is a production model. Combat Pretzel fucked around with this message at 17:32 on Aug 18, 2017 |
# ? Aug 18, 2017 17:11 |
|
|
# ? May 27, 2024 02:20 |
|
Oh I didn't realize you literally just made 3, that's amazing. Good luck!
|
# ? Aug 18, 2017 17:35 |
|
If he releases the CAD and parts list, you could order your own run maybe through oshpark, and then toast yourself a board on your own. But since it's untested, might as well wait for him to do his own beta testing
|
# ? Aug 18, 2017 19:20 |
|
Hmmm, interesting. Peabody124, who wrote the autotune system years ago (back with Taulabs) became loosely active in #dRonin (again) and is writing some model based state estimator. That could possibly lead to glorious things. As if that guy doesn't have enough on the plate with his medical studies.
|
# ? Aug 19, 2017 11:50 |
|
Somewhat annoyingly, the fact that I watch a lot of quad copter/FPV stuff on youtube means all my vid recommendations are about steel getting fired or whatever. EDIT: What the gently caress is hammergate?
|
# ? Aug 20, 2017 13:46 |
|
I have no idea. Something something about a quad getting smashed to bits at some MultiGP event because of a rule violation. Name being thrown around of the offender is Chris Thomas, which also happens to the founder of MultiGP. Someone being a massive rear end in a top hat due to delusions of grandeur, from how things sound. --edit: Apparently some lovely rule made up about him smashing any quad that sends more than 25mW over the VTX, and this seems to be the first time he followed through. At least first time recorded on video. --edit2: From the horse's mouth: https://www.youtube.com/watch?v=2qWn7ImGAUc Combat Pretzel fucked around with this message at 14:35 on Aug 20, 2017 |
# ? Aug 20, 2017 14:18 |
|
we've had 3500 races and this is the first time I have picked up a hammer and literally smashed the gently caress out of someone's private property lol
|
# ? Aug 20, 2017 17:25 |
|
I saw a hammer smash dubstep edit on Instagram a few days ago and just assumed it was a guy who was pissed at his gear. Then I found out it was an organizer so I just assumed it was a stunt and they smashed an emax nighthawk or something. The gopro mount was empty... But then the league owner guy appologised for losing his temper lol
|
# ? Aug 20, 2017 20:47 |
|
So I'm thinking of picking up this Gremlin frame. Going to transfer the stuff from my babyhawk over to it, minus the camera. Is there anything else I will need? What's the best way to attach the FC and ESCs? How should I secure the battery? Right now I'm using the strap thing on the hawk.
|
# ? Aug 20, 2017 21:35 |
|
bring back old gbs posted:But then the league owner guy appologised for losing his temper lol Also I wanna put a heavier 5" together and I'm completely stumped for FC's. I kinda want a 4in1 ESC but most are made with a companion F4 board in mind, and then telemetry is a PITA. I'd go kiss but they're coming out with a 6S system soon which I'll prob want, and their ESCs are dumb money. evil_bunnY fucked around with this message at 22:01 on Aug 20, 2017 |
# ? Aug 20, 2017 21:57 |
|
evil_bunnY posted:LBR managing FPV races is a complete PITA and if I had to do it I'd smash a quad on day 1. A friend of mine just built their first 5" with a BFF3 board, Rotorgeeks 2204/2300kv motors, Spedix 30a ESCs, on a Chameleon frame. He put it together using the chameleon PDB and just daisy chaining the battery +- to the BFF3 board for current sensing. No idea if this will work but worth a shot. The ESC pads are easier to get to on the chameleon PDB, they're on the bottom of the BFF3.
|
# ? Aug 21, 2017 00:01 |
|
bring back old gbs posted:A friend of mine just built their first 5" with a BFF3 board, Rotorgeeks 2204/2300kv motors, Spedix 30a ESCs, on a Chameleon frame. He put it together using the chameleon PDB and just daisy chaining the battery +- to the BFF3 board for current sensing. No idea if this will work but worth a shot. The ESC pads are easier to get to on the chameleon PDB, they're on the bottom of the BFF3. That setup works (I use it) but I am getting a lot of noise through the video feed and presumably its causing the power cut issue Im having. Im thinking of scrapping the whole setup and going to the Matek F405 AIO.
|
# ? Aug 21, 2017 03:21 |
|
Combat Pretzel posted:
Lol this loving video "So uh i decided I would smash this quad" Dude your lucky as gently caress you didn't get cooked. What if it was a loving accident that he was on the wrong power level? Unrelated, do i need anything besides a parallel board to charge with this http://store.rotorriot.com/isdt-q6-plus-300w-14a-mini-pocket-charger/ I cant figure out if it needs a power supply or anything to charge the 3 packs I have. Could I go one at a time?
|
# ? Aug 21, 2017 07:29 |
|
bring back old gbs posted:A friend of mine just built their first 5" with a BFF3 board, Rotorgeeks 2204/2300kv motors, Spedix 30a ESCs, on a Chameleon frame. He put it together using the chameleon PDB and just daisy chaining the battery +- to the BFF3 board for current sensing. No idea if this will work but worth a shot. The ESC pads are easier to get to on the chameleon PDB, they're on the bottom of the BFF3. AcidRonin posted:What if it was a loving accident that he was on the wrong power level? AcidRonin posted:Unrelated, do i need anything besides a parallel board to charge with this http://store.rotorriot.com/isdt-q6-plus-300w-14a-mini-pocket-charger/ I cant figure out if it needs a power supply or anything to charge the 3 packs I have. Could I go one at a time? evil_bunnY fucked around with this message at 08:55 on Aug 21, 2017 |
# ? Aug 21, 2017 08:51 |
|
evil_bunnY posted:Go to a pilot's briefing sometime. It gets hammered (heh) again and again to not power up when a heat is on, and to never get past 25mW because there's just not enough spectrum separation when you have 8 ships in the air. Yea but if I go to a track day and break the rules, I get kicked out. The organizers don't get to crush my car. It just seems like such a silly response from a professional organization.
|
# ? Aug 21, 2017 10:31 |
|
AcidRonin posted:Yea but if I go to a track day and break the rules, I get kicked out. The organizers don't get to crush my car. It just seems like such a silly response from a professional organization.
|
# ? Aug 21, 2017 10:45 |
|
Why do you want to skip f4 boards evil bunny? People seem to be enjoying them. I don't really follow hype that much so I never really know what's going on. This hobby is very bad for hype and drama though.
|
# ? Aug 21, 2017 12:29 |
|
Laserface posted:Why do you want to skip f4 boards evil bunny? People seem to be enjoying them. evil_bunnY fucked around with this message at 12:46 on Aug 21, 2017 |
# ? Aug 21, 2017 12:39 |
|
Why people introduced inverted serial protocols to begin with, that's beyond me. gently caress that annoying poo poo. Also, the F7 is comically huge.
|
# ? Aug 21, 2017 16:28 |
|
AcidRonin posted:Yea but if I go to a track day and break the rules, I get kicked out. The organizers don't get to crush my car. It just seems like such a silly response from a professional organization. FWIW apparently both the guy who lost his quad to interference AND the guy who had his kit smashed both got brand new rigs within the hour, but by that point the drama machine was going full steam. Then Steele quit Rotor Riot, and it sounds like the straw that broke the camels back was kotowing to that broken quad situation trying to prevent damage to RR's "brand" due to their association with the event. #QUADRAMA
|
# ? Aug 21, 2017 18:12 |
|
bring back old gbs posted:FWIW apparently both the guy who lost his quad to interference AND the guy who had his kit smashed both got brand new rigs within the hour, but by that point the drama machine was going full steam. Then Steele quit Rotor Riot, and it sounds like the straw that broke the camels back was kotowing to that broken quad situation trying to prevent damage to RR's "brand" due to their association with the event. Running 200mw is a very stupid, basic mistake, but with some of the switchable power outputs, it can be an easy one to make, especially if you're under pressure to get a quad ready. Other than that, it was supposed to have been an amazing event. Lots and lots of flying, good organisation, etc. Steele is insufferable. He's got an ego on the size of a planet and can do no wrong (and never did anything wrong either! Everything is totally legal! Even when he gets arrested for trespassing).
|
# ? Aug 21, 2017 21:05 |
|
Any recommendations for exercises for learning to fly not lovely? I can hover pretty well and follow behind it as I fly and make small turns and stuff, but not sure what I should focus on next. Haven't quite figured out how all the controls combine to get it to do different things.
|
# ? Aug 21, 2017 21:21 |
|
A Proper Uppercut posted:Any recommendations for exercises for learning to fly not lovely? I can hover pretty well and follow behind it as I fly and make small turns and stuff, but not sure what I should focus on next. Haven't quite figured out how all the controls combine to get it to do different things. Flitetest have a video or two on how to learn flying quads. I'm lazy and can't be bothered to find them for you, but a quick search on Youtube should find them.
|
# ? Aug 22, 2017 09:53 |
|
The flite tests vids are dumb as hell. Just spend the time in a simulator, most have tutorials for super-newbies, but if they don't use Joshua Bardwell's series on learning to fly FPV.
|
# ? Aug 22, 2017 10:02 |
|
evil_bunnY posted:The flite tests vids are dumb as hell. Just spend the time in a simulator, most have tutorials for super-newbies, but if they don't use Joshua Bardwell's series on learning to fly FPV. This. I did this and felt very comfortable
|
# ? Aug 22, 2017 11:11 |
|
Has anyone picked up the new Sunrise Cicada AIO F4 board yet? http://www.getfpv.com/electronics/e...ent-sensor.html PDB, 35A Blheli_S w/ DSHOT, F4 FC, and an OSD all on the same board. It sounds perfect for me since I run a QAV-X and my stack is absolutely packed solid. Plus I constantly have video noise issues. I have my VTX and camera on filtered power, but every time I have a minor collision or a hard landing even, the noise returns and I have to re-solder all my connections. I get the feeling part of my issue is the nest of wires smashed into that small space. It seems like maybe an AIO would at least clear up the wiring mess a bit, as well as HOPEFULLY have a filter that's capable of dealing with the power from the onboard ESCs. ...or am I just looking to spend more money on the same noisy video?
|
# ? Aug 23, 2017 02:01 |
|
McMadCow posted:Has anyone picked up the new Sunrise Cicada AIO F4 board yet? I haven't even had good luck with the Kiss AIO's and I thought they were known for their quality/service. Of the 4 AIO boards I've bought 0 are in the air and only 1 was a definite fuckup by me. 1 has a twitchy motor, 2 melted 2 FETS off the board mid flight, and 3 is currently in customs limbo in Germany because it arrived DOA and I had to send it back to them. Now add Eastern quality control/cost cutting into the mix and I can't imagine they will last long. I'm back to individual components. Though I have a Spedix 30a 4in1 that refuses to die. I'd get one of those FC AIO boards if Spedix made it.
|
# ? Aug 23, 2017 02:47 |
|
bring back old gbs posted:I haven't even had good luck with the Kiss AIO's and I thought they were known for their quality/service. Of the 4 AIO boards I've bought 0 are in the air and only 1 was a definite fuckup by me. 1 has a twitchy motor, 2 melted 2 FETS off the board mid flight, and 3 is currently in customs limbo in Germany because it arrived DOA and I had to send it back to them. Dang, that's weird. I currently run the Cicada 4-in-1 35A esc and it's been rock solid for me. I just can't seem to get the video quality to stay solid in the event of any disruptions. :/
|
# ? Aug 23, 2017 03:51 |
|
Any Dji drone users here also use litchi? I bought an nvidia shield tablet to use but dji go is a terrible app on it and will crash regularly. I'm just wondering if I use litchi instead will I run into issues? All I really want is stable video and app performance.
|
# ? Aug 23, 2017 11:28 |
|
Bigsteve posted:Any Dji drone users here also use litchi? I bought an nvidia shield tablet to use but dji go is a terrible app on it and will crash regularly. I've heard that the dji android app just isn't very good on some devices. I haven't had any issues using it on ios.
|
# ? Aug 23, 2017 15:22 |
|
This would be the preferred option but for me ios is just a little expensive for me. If I have to bite the bullet I will I guess. But £20 for litchi would be worth it if anyone has used it.
|
# ? Aug 23, 2017 15:38 |
|
Bigsteve posted:This would be the preferred option but for me ios is just a little expensive for me. I've heard great things about it but I haven't used it yet.
|
# ? Aug 23, 2017 15:39 |
|
I've used Litchi and it's pretty good. Certainly a fine replacement for Dji Go. The missions are nice. I think you can request a refund within a couple hours on Google Play so buy it if you can fly your drone right after to test it. The VR on Litchi is pretty entertaining for a few minutes.
|
# ? Aug 23, 2017 16:24 |
|
Bigsteve posted:Any Dji drone users here also use litchi? I bought an nvidia shield tablet to use but dji go is a terrible app on it and will crash regularly. I only use Litchi - not only is it more stable than the DJI app, it does not have the same weird issues with height and distance limits. I'm on iOS. All the extra stuff, is sweet. Pano shots, and missions, you can plot everything on your computer and then download it to the device. I don't regret spending the money and haven't used the DJI Go app since.
|
# ? Aug 23, 2017 21:25 |
|
Anybody here with XM+ receiver? I'm on #3 of these and they have all had the same problem: I bind the TX and RX, fly around just fine, and want to move the RX to another model / create a new model / whatever. On the new model, after doing the bind process, I cannot get the happy green light on the RX. I get a solid red light, with weird occasional flickers of green. I've got D16 mode with channels 1-16 selected, and done all the magical button press tricks, etc, just cannot get the happy green light after binding. Ugh!
|
# ? Aug 24, 2017 01:06 |
|
FrSky R-XSR looks so nice, it's basically XM+ size, U.FL connectors, diversity and telemetry.My Rhythmic Crotch posted:Anybody here with XM+ receiver? I'm on #3 of these and they have all had the same problem: I bind the TX and RX, fly around just fine, and want to move the RX to another model / create a new model / whatever. On the new model, after doing the bind process, I cannot get the happy green light on the RX. I get a solid red light, with weird occasional flickers of green. I've got D16 mode with channels 1-16 selected, and done all the magical button press tricks, etc, just cannot get the happy green light after binding. Ugh! evil_bunnY fucked around with this message at 12:33 on Aug 24, 2017 |
# ? Aug 24, 2017 12:28 |
|
Hey I bought a Mavic pro as a bit of a split second decision. Was it a good idea?
|
# ? Aug 25, 2017 16:47 |
|
TescoBag posted:Hey I bought a Mavic pro as a bit of a split second decision. Was it a good idea? I love mine.
|
# ? Aug 25, 2017 18:37 |
|
Oh look! Thing seems to work. It didn't catch fire and the STM32 bootloader shows in the device manager when I short the boot pins. Still need to write the firmware port, but I'm done for today.
|
# ? Aug 25, 2017 21:34 |
|
|
# ? May 27, 2024 02:20 |
|
Combat Pretzel posted:Oh look! hah, badass. What's the full size LED for?
|
# ? Aug 25, 2017 21:40 |