|
Difference being if they could mould a stupid shape into the intake piping and get 20% mpg improvement it's a selling point, not so with the safety strap
|
# ? Sep 15, 2017 06:19 |
|
|
# ? May 25, 2024 14:21 |
|
What about decent headers/exhaust extractors? Most manufacturers had sucky ones just due to cost. I was blown away with the BMW, yeah, still cast headers but half decent and twin pipe through the exhaust. If they're selling a car for $80k+ they do it right. But that era fords and other cheap marques were crap, and mazda rotaries just had a box when they run better with long primaries. The vortex thing is poo poo, but as emissions and economy became more important they did spend the extra dollars. So not much gains from anything made well or in the last 15-20 yrs, but looking back, they put profit over performance/economy it is plain to see just in exhausts Fo3 fucked around with this message at 11:41 on Sep 15, 2017 |
# ? Sep 15, 2017 11:36 |
|
Fo3 posted:What about decent headers/exhaust extractors? Most manufacturers had sucky ones just due to cost. Behold! The quality engineered German headers of the Porsche 996! High density, high strength booger welds included at no extra cost!
|
# ? Sep 15, 2017 12:10 |
I was really loving impressed at just how over complicated and German that exhaust routing was until I remembered that it was a rear engine.
|
|
# ? Sep 15, 2017 12:19 |
|
Dave Inc. posted:Behold! The quality engineered German headers of the Porsche 996! The turbos have about the most simple exhaust, especially in comparison.
|
# ? Sep 15, 2017 15:18 |
|
Thats not as bad as the 914's with the heat exchanger/exhaust. Those drat things are worth more than the cars they are on its like 7k for oem. Even aftermarket its like 3.5 if you still want heat exchangers. They look like a real pain in the rear end to manufacture. Imgur is acting weird but heres a link to aftermarket pipes 1k per side just for the pipe. http://www.autoatlanta.com/Porsche-914-Heat-Exchangers-srch.html
|
# ? Sep 15, 2017 18:27 |
|
DogonCrook posted:Thats not as bad as the 914's with the heat exchanger/exhaust. Those drat things are worth more than the cars they are on its like 7k for oem. Even aftermarket its like 3.5 if you still want heat exchangers. They look like a real pain in the rear end to manufacture. I'm surprised, those are the same price per side as stainless exchangers for air cooled 911s. http://www.patrickmotorsports.com/part/ssi-exhaust-headers-heat-exchanger-set-911-32l-1984-1989/ I love heat exchangers, though, the outlet air is freaking hot.
|
# ? Sep 15, 2017 18:50 |
|
Powershift posted:i bought this to compliment Air Intake Chrome Open To Cone Air Filter due to Easy install. But it didn't come with dire toons. Had to use common sense. (4 stars) Installed it on a 2007 Toyota land cruiser, i think it made a small difference but had it on there for a few weeks when the propeller came off and one of the blades broke and went into the throttle control causing a $400 damage, it could be a much better product if the propellers were more secured to the center shaft, Not happy at all. (3 stars)
|
# ? Sep 15, 2017 18:53 |
|
id' be interested to see what happens if you ran one in reverse!
|
# ? Sep 15, 2017 20:19 |
|
tater_salad posted:id' be interested to see what happens if you ran one in reverse! Put one in the exhaust for an extra 10 pounds of forward thrust.
|
# ? Sep 15, 2017 21:14 |
|
Dave Inc. posted:Behold! The quality engineered German headers of the Porsche 996! Ew. You'd think they'd do a better job with the runner length and collectors. Oh well, if you buy a 911 just buy some headers from bbi or GMG or something. jamal fucked around with this message at 22:22 on Sep 15, 2017 |
# ? Sep 15, 2017 22:18 |
|
Collateral Damage posted:Easy install. But it didn't come with dire toons. Had to use common sense. (4 stars) Whelp, already failed that last bit by buying the thing.
|
# ? Sep 15, 2017 22:37 |
|
Collateral Damage posted:Easy install. But it didn't come with dire toons. Had to use common sense. (4 stars) wtf is a dire toon? I mean like, the bad guy from Roger Rabbit?
|
# ? Sep 16, 2017 02:19 |
|
Memento posted:wtf is a dire toon? I mean like, the bad guy from Roger Rabbit? "Directions" + auto correct
|
# ? Sep 16, 2017 02:25 |
|
Saw this in the OSHA thread and thought of folks here. Hopefully it didn't come from here.
|
# ? Sep 16, 2017 02:35 |
|
Dave Inc. posted:Behold! The quality engineered German headers of the Porsche 996! The worst part about dropping one is getting the loving mufflers clear of the rear bumper. its heavy too. Deff needed another set of hands on the one I worked on.
|
# ? Sep 16, 2017 04:34 |
Pigsfeet on Rye posted:Saw this in the OSHA thread and thought of folks here. Hopefully it didn't come from here. I thought those were lug nut indicators at first
|
|
# ? Sep 16, 2017 04:44 |
|
Wait they're not?
|
# ? Sep 16, 2017 05:02 |
|
Metal Geir Skogul posted:Wait they're not? Those are the holes in the wheel stretched to gently caress and back.
|
# ? Sep 16, 2017 06:41 |
|
I thought the same thing at first.
|
# ? Sep 16, 2017 06:50 |
|
I don't get how the wheel is still on the truck. Nothing is holding it on anymore is there?
|
# ? Sep 16, 2017 07:18 |
|
I think the only thing that IS holding it on is whatever metal is jammed under the rim of the nut at this stage and its never had a reversing force put against it...
|
# ? Sep 16, 2017 09:10 |
|
For me that looked like a 10-lug wheel converted to 5-lug by drilling out the old lug holes and attaching a rear plate to it. Even the center hole seems wrong size.
|
# ? Sep 16, 2017 11:11 |
|
The image is 3700 pixels wide, just open it in a new tab and you'll see. It's a double wheel, and the wheel facing out is loving wrecked, and just holding on by tiny slivers of metal. Nothing has been drilled out, it's just hosed - Ferremit is right.
|
# ? Sep 16, 2017 12:04 |
Since we're on the subject of lug nut indicators it seems like a good time to share a little factoid I found out not too long ago: the nicer ones are made with materials chosen to melt at particular temperatures, so you can spot rubbing brakes or overheating wheel bearings. Probably something everyone already knew but I felt it was a neat little bit of smart design on such a mundane thing.
|
|
# ? Sep 16, 2017 14:54 |
|
Ferremit posted:I think the only thing that IS holding it on is whatever metal is jammed under the rim of the nut at this stage and its never had a reversing force put against it... What's holding it on is... Not much, but there's not much forcing it off either. That's a Budd wheel, it's got separate nuts for the inner and outer wheel so the inner wheel is still firmly attached and bearing all the weight, acceleration and braking forces and the outer is just kinda jiggling and bouncing away.
|
# ? Sep 16, 2017 15:26 |
|
DogonCrook posted:Yeah i guess that all goes to poo poo really fast. My buddy dropped his driveshaft on the freeway a year or two ago and luckily he didnt have this or a pole vault happen so i was curious. Holy crap, that's got to be scary. I've read about it happening from time to time, but I actually saw three pickups over the summer at random places around town that had dropped the rear, one on the freeway. Had never seen it in person before.
|
# ? Sep 16, 2017 16:07 |
|
What series of events needs to happen to get that outer wheel to enlarge/elongate like that? Improper torque allowing the wheel to move on the studs?
|
# ? Sep 16, 2017 16:16 |
|
Garage2Roadtrip posted:What series of events needs to happen to get that outer wheel to enlarge/elongate like that? Improper torque allowing the wheel to move on the studs? That or mud/rust/shmoo between the wheels not getting cleaned off when they're put together, usually. Works its way out over time and you lose your clamp load.
|
# ? Sep 16, 2017 16:32 |
|
Shifty Pony posted:Since we're on the subject of lug nut indicators it seems like a good time to share a little factoid I found out not too long ago: the nicer ones are made with materials chosen to melt at particular temperatures, so you can spot rubbing brakes or overheating wheel bearings.
|
# ? Sep 16, 2017 17:31 |
|
It has to be that the nuts weren't tightened enough. I remember a long time ago, there was someone who put on the spare on their Mercedes, but the spare comes with different lugs that are shorter. The person put the wheel on the standard lugs which were clearly way too long, and when the nut reached the end of the threads, there was still half an inch of lug between the nut and the wheel. When they drove away, the wheel was just banging away loosely on the lugs and stretched out the holes.
|
# ? Sep 16, 2017 17:34 |
|
Cojawfee posted:It has to be that the nuts weren't tightened enough. I remember a long time ago, there was someone who put on the spare on their Mercedes, but the spare comes with different lugs that are shorter. The person put the wheel on the standard lugs which were clearly way too long, and when the nut reached the end of the threads, there was still half an inch of lug between the nut and the wheel. When they drove away, the wheel was just banging away loosely on the lugs and stretched out the holes. To be fair, sounds like terrible design.
|
# ? Sep 16, 2017 17:48 |
|
SEKCobra posted:To be fair, sounds like terrible design. Mercedes: even our lugnuts are special snowflakes
|
# ? Sep 16, 2017 17:49 |
|
SEKCobra posted:To be fair, sounds like terrible design. It's a very German solution to a problem where anyone normal would say "Just make that part of the spare thicker.
|
# ? Sep 16, 2017 17:57 |
|
Cojawfee posted:It's a very German solution to a problem where anyone normal would say "Just make that part of the spare thicker. Manufacturers are squeezing spares into extremely tight spaces these days, especially Germans; I believe Mercedes is the one that has the sidewalls collapsed and you have to fill them roadside. It's entirely possible that putting a half inch tall flange for the lugs would have meant re engineering the entire trunk area.
|
# ? Sep 16, 2017 19:44 |
|
Enourmo posted:Manufacturers are squeezing spares into extremely tight spaces these days, especially Germans; I believe Mercedes is the one that has the sidewalls collapsed and you have to fill them roadside. might be more a fault of increasingly larger and wider tire sizes on luxury cars rather than dwindling trunk space. Goddamn Altimas coming with space savers now.
|
# ? Sep 16, 2017 19:57 |
|
Shifty Pony posted:Since we're on the subject of lug nut indicators it seems like a good time to share a little factoid I found out not too long ago: the nicer ones are made with materials chosen to melt at particular temperatures, so you can spot rubbing brakes or overheating wheel bearings. I actually had no drat clue. When I pull up next to a bus I spot them and am glad to see they are uniform. Thanks for sharing.
|
# ? Sep 16, 2017 23:09 |
|
Enourmo posted:Manufacturers are squeezing spares into extremely tight spaces these days, especially Germans; I believe Mercedes is the one that has the sidewalls collapsed and you have to fill them roadside. It well fits this thread, but yeah, reviving an old idea: the collapsible spare tire: https://www.youtube.com/watch?v=2znukoboOro
|
# ? Sep 17, 2017 00:23 |
|
ET_375 posted:It well fits this thread, but yeah, reviving an old idea: the collapsible spare tire: https://www.youtube.com/watch?v=2znukoboOro Superior German Engineering® Beetles used the spare tyre to pressurise the windscreen sprayer.
|
# ? Sep 17, 2017 01:00 |
|
|
# ? May 25, 2024 14:21 |
|
Platystemon posted:Superior German Engineering® What? Why? What if you've been using the sprayer and then need to use the spare tire?
|
# ? Sep 17, 2017 01:58 |