|
Slim Pickens posted:Terrible upload failure for this one, but I'll give you two options: the Facebook video, and the poorly re-uploaded YouTube of it if you hate Facebook too much.
|
# ? Dec 3, 2017 09:06 |
|
|
# ? May 26, 2024 07:38 |
|
That's not even close to 100 mph.
|
# ? Dec 3, 2017 19:36 |
|
I know it didn't happen but I'm picturing that it straight up disintegrated except for that wheel and that other bit of debris.
|
# ? Dec 4, 2017 08:18 |
|
No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. Yes, that's what I said. He tightened the chuck down all the way with no bit installed, so that the jaws came out and closed up into that blunt cone that they do, spun up the drill press, and then rammed the jaws into the surface of a 2" thick glued-up plywood block. Now the chuck no longer opens.
|
# ? Dec 5, 2017 23:19 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. I think generally for friction drilling/flow drilling you need a blunt cone of tungsten carbide, and a material half as thick as the hole radius. Nice try, though.
|
# ? Dec 5, 2017 23:34 |
|
bennyfactor posted:I think generally for friction drilling/flow drilling you need a blunt cone of tungsten carbide, and a material half as thick as the hole radius. Nice try, though. https://www.youtube.com/watch?v=w-GOYNAltEw
|
# ? Dec 5, 2017 23:47 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. Did you give him a A for effort?
|
# ? Dec 5, 2017 23:54 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. Well, now you can turn this into a lesson on how to replace a chuck.
|
# ? Dec 6, 2017 01:49 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. What age and skill level of student? Should this person have a handler of some kind in normal life? Do they pay to replace it? Are you allowed to tase your students for stupidity?
|
# ? Dec 6, 2017 09:19 |
|
jacobs chuck? nothing much was lost.
|
# ? Dec 6, 2017 09:36 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. Yeah, but does the hole he drilled look good? He may have pioneered a new drilling technique
|
# ? Dec 6, 2017 10:41 |
|
Friction stir joinery
|
# ? Dec 6, 2017 11:07 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. 36 inch pipe wrenches.
|
# ? Dec 6, 2017 12:38 |
|
Give him a hand drill or brace for all future work.
|
# ? Dec 6, 2017 14:17 |
|
Just give him a drill bit and a pair of vise grips.
|
# ? Dec 6, 2017 14:31 |
|
Sagebrush posted:No pictures of this one because it wasn't that interesting to look at, but earlier today one of our students destroyed the chuck on one of our drill presses by trying to drill a hole through a piece of wood without installing a drill bit. .....why? I mean, what did he think he was doing, or was going to accomplish?
|
# ? Dec 6, 2017 17:40 |
|
Darchangel posted:.....why? I already know, I remember running the drill backwards and forwards as a kid, just to see the jaws open and close. It's cool to watch and pick stuff up with when you're 6, so if you're bored in class...
|
# ? Dec 6, 2017 17:58 |
|
Is this vocational school or high school? Given the liability issue (and the dumb poo poo we did as bored teenagers over 25 years ago) does shop class/small engine classes still exist?
|
# ? Dec 6, 2017 18:30 |
|
|
# ? Dec 6, 2017 18:47 |
|
cakesmith handyman posted:What age and skill level of student? Should this person have a handler of some kind in normal life? Do they pay to replace it? Are you allowed to tase your students for stupidity? Colostomy Bag posted:Is this vocational school or high school? College student in a design program, early 20s. Probably like half of the kids I teach have never used a drill or a saw before arriving here, and I bet some of them have never used a screwdriver. High schools have mostly eliminated shop classes these days, and organizations like the boy scouts where you might learn how to use basic tools have also been decimated. Every semester I blow people's minds by demonstrating that you can cut a STEEL ROD in half without even using power tools -- just a hacksaw!! No, they don't pay to replace it, though the director will have some words with the instructor who was supposed to be supervising the class. I wish I could tase them sometimes. Darchangel posted:.....why? He thought he was drilling a hole, I guess, and figured "this is the tool that makes holes in things and that part that spins looks kinda pointy to me." The Door Frame posted:Yeah, but does the hole he drilled look good? He may have pioneered a new drilling technique It looked burnt and shredded. InitialDave posted:Give him a hand drill or brace for all future work. Yeah, this is pretty much what happens when you do something like this. No more floor tool privileges.
|
# ? Dec 7, 2017 01:46 |
|
In HS I elected to not take shop or the mechanic class. Instead I took Engineering Tech and we had a CNC lathe, mill, router, robotic arm, plastic thermoforging machine/welder, and a rapid prototyper amongst other things. My grandfather was a HS shop teacher, after years of begging my parents they finally gave me one of the workbenches from his class and I have a radial arm saw sitting on top of it that I first used when I was like 6 years old. Out of my group of friends that are 30somethings like me, only one other one owns any tools beyond a hammer, multibit screwdriver, and the tape measure they barely know how to use. Fermented Tinal fucked around with this message at 02:00 on Dec 7, 2017 |
# ? Dec 7, 2017 01:57 |
|
Fermented Tinal posted:In HS I elected to not take shop or the mechanic class. Instead I took Engineering Tech and we had a CNC lathe, mill, router, robotic arm, plastic thermoforging machine/welder, and a rapid prototyper amongst other things. Dragged my son out to the garage this weekend to help me build a bed for him. Sore and tired at the end of the day is probably bad for an 8 year old, but he had fun. This is the reason why I did it.
|
# ? Dec 7, 2017 06:01 |
|
Coming from auto-mechanic land it boggled my mind how completely terrible people can be with tools in my college work lab. Here's a guy using a hacksaw to cut through 1/2" plywood. Here's a guy attempting to use a dremel as a router in plywood... with one of those ceramic grinding heads. Here's someone hammering a 1/2" diameter wood-thread bolt through a 4x4. Here's someone using a step drill to create a hole in a 2x4.
|
# ? Dec 7, 2017 07:26 |
|
My wife used my hacksaw to cut branches off a little tree and complained that it was a piece of poo poo because of how long it took. Then she discovered my side cutters and used them for pruning her rose bushes... And left them out in the rain
|
# ? Dec 7, 2017 08:31 |
|
|
# ? Dec 7, 2017 08:35 |
|
Is trimming linoleum something that had to be done on the regular?
|
# ? Dec 7, 2017 08:58 |
|
Creeping lino was an affliction that modem kids won't understand
|
# ? Dec 7, 2017 09:06 |
|
Google reveals nothing, but you mean occasionally where it would curl where it met the wall? I thought that was just lovely installation.
|
# ? Dec 7, 2017 09:24 |
|
Metal Geir Skogul posted:Is trimming linoleum something that had to be done on the regular? “They were remodelling” is all I’ve got.
|
# ? Dec 7, 2017 09:27 |
|
I'm joking. I can't think of a situation other than installation or modification where you'd cut it.
|
# ? Dec 7, 2017 09:32 |
|
Memento posted:My wife used my hacksaw to cut branches off a little tree and complained that it was a piece of poo poo because of how long it took. I think it's time to put a lock on the tool cabinet. (I have become my Dad)
|
# ? Dec 7, 2017 10:06 |
|
I am such a codger for proper tool use Any tool Kitchen knives are tools so I go loopy when i see people chop with paring knives.
|
# ? Dec 7, 2017 11:06 |
|
Rigged Death Trap posted:I am such a codger for proper tool use Dull paring knives. They're always dull.
|
# ? Dec 7, 2017 15:16 |
|
Rigged Death Trap posted:I am such a codger for proper tool use My girlfriend consistently reaches for the smallest knife in the block when she needs to do something. Peel a potato? Paring knife. Ok fine, that’s the right tool. Slice a baby carrot carrot? Paring knife. Dice four enormous onions? Paring knife. Debone chicken parts? Paring knife. It drives me insane.
|
# ? Dec 7, 2017 15:23 |
|
I'm a stickler for proper tool use until I'm mad. When something pisses me off anything becomes a hammer...
|
# ? Dec 7, 2017 15:27 |
|
MrYenko posted:My girlfriend consistently reaches for the smallest knife in the block when she needs to do something. This is my wife. Also, everything is cut with a short sawing motion.
|
# ? Dec 7, 2017 15:27 |
|
Doing chef knife work with a paring knife is like doing drill press work with a hand drill. Harder, worse results, more hazardous. I love seeing the mindblown look on someones face when you show them how to use the right (and well cared for) tool for a job though. Warms my heart.
|
# ? Dec 7, 2017 15:39 |
|
MrYenko posted:My girlfriend consistently reaches for the smallest knife in the block when she needs to do something. My wife is the opposite, any job requiring something to be cut requires the 9" chef's knife. I've tried correcting but it doesn't help so I do most of the food prep cutting and keep it sharp for when she uses it.
|
# ? Dec 7, 2017 15:49 |
|
MrYenko posted:My girlfriend consistently reaches for the smallest knife in the block when she needs to do something. This is me. We don't have enough knives to both be prepping at once, so my wife gets whichever knife is the 'best' one and I just get along with whatever's left in the block.
|
# ? Dec 7, 2017 15:51 |
|
|
# ? May 26, 2024 07:38 |
|
I have a MAC Santoku that I keep properly sharp. My wife won't use it because every time she does she accidentally cuts herself. Works for me! (I also do almost all of the cooking)
|
# ? Dec 7, 2017 16:01 |