|
MonkeyNutZ posted:The other good news is that I stumbled into tons of spare Swift GTI engine parts which significantly speeds up my plans for more horsepower. A set of cams is already in Canada getting reground to a comically aggressive level and I have a lovely new EPROM on my desk ready to go as soon as I socket the ECU. Looking forward to hearing your lumpy little 1.3 doing its best superbike impression.
|
# ? May 6, 2018 05:29 |
|
|
# ? May 14, 2024 17:18 |
|
Those seats look awesome.
|
# ? May 6, 2018 05:48 |
|
IOwnCalculus posted:Those seats look awesome.
|
# ? May 6, 2018 11:26 |
|
Great job man, I hear you about poo poo possibly exploding, every time I did a Miata top (I did a lot) it always felt like poo poo would start ripping apart because it felt way too tight even after heating it up in the sun. Amazingly I never hosed one up.
|
# ? May 6, 2018 18:52 |
|
MonkeyNutZ posted:The other good news is that I stumbled into tons of spare Swift GTI engine parts which significantly speeds up my plans for more horsepower. A set of cams is already in Canada getting reground to a comically aggressive level and I have a lovely new EPROM on my desk ready to go as soon as I socket the ECU. Traveling for work more than usual recently so I still have some spares to dig into when I get back next weekend, I'll get a post together about all that jazz right after! Sometimes these stories are the best. I once gave a phone number of someone selling a Z to a buddy. The person selling the Z technically had 8 Z's for sale...
|
# ? May 7, 2018 20:51 |
|
Seat Safety Switch posted:I'm so happy this project is still going. Cool hog-ring trick, I will have to remember it the next time I decide to I stared into the abyss the last time I did a motorcycle seat, and then I doubled down doing the paint myself. After over 100 hours I learned that nothing is real except forearm pain.
|
# ? May 9, 2018 07:00 |
|
Paying someone to refurbish the seats just didn't feel right, glad I did them myself and that everyone likes them as much as I do!LloydDobler posted:As for the spring clips, could zip ties work? I use zip ties instead of hog rings whenever I do upholstery, and they've never let me down. I can't find anything similar other than plastic door trim push pin retainers which I absolutely hate using. Unless someone here knows a better way to search for oddball 50 year old seat upholstery fasteners I'm debating just tapping each of the holes and using screws and nylon washers. 8ender posted:I stared into the abyss the last time I did a motorcycle seat, and then I doubled down doing the paint myself. After over 100 hours I learned that nothing is real except forearm pain.
|
# ? May 14, 2018 23:03 |
|
MonkeyNutZ posted:Paying someone to refurbish the seats just didn't feel right, glad I did them myself and that everyone likes them as much as I do! How many of them do you need? Seems like something you could rig a up a small jig made from nails in a board and bend some spring wire around. E- like this, only manually. https://i.imgur.com/JOxc3xy.gifv Shouldn't be to bad if you only need like half a dozen. Finger Prince fucked around with this message at 00:17 on May 15, 2018 |
# ? May 15, 2018 00:12 |
|
Here's your wire clips: https://www.yourautotrim.com/11406.html
|
# ? May 15, 2018 01:57 |
|
Hot drat, those should work just fine and they'll be here by Friday I would have definitely made my own artisanal trim clips if it was just a few (because that actually sounds like a fun challenge) but I need 58 of the drat things. All but four of them were rusty and broke into dust when I disassembled the seats, took ages to get the little bits out of the seat tubes to keep them from rattling around later.
|
# ? May 15, 2018 02:22 |
|
You're a masochist for wanting to use the stock injection system in a different car that didn't come with EFI. The cherry on top being some big aftermarket cams! Honestly a splashproof microsquirt in the engine bay driving some smart COPs would clean up the bay a lot, prevent you from having to hide a giant outdated ECU, not require a big access bump behind the dash for a dizzy, nor you to pass its big wiring bundle through the firewall. And you know what goes great with big bump sticks? ITBs!
|
# ? May 17, 2018 17:18 |
|
mafoose posted:You're a masochist for wanting to use the stock injection system in a different car that didn't come with EFI. The cherry on top being some big aftermarket cams I thought Sloppy mechanics had that kind of slovenly antics well documented? I’m a fan of factory ecu’s as they are generally quite powerful.
|
# ? May 18, 2018 05:16 |
|
Kaptainballistik posted:I’m a fan of factory ecu’s as they are generally quite powerful. Especially since the Suzuki he got it out of is a bullet proof little car. I had a brand new Swift GT back in the 90's and the engine in that car was probably the best twin cam four banger I had the pleasure of abusing. Might as well go with what you know is gonna work. [e] but ITBs do sound like a great idea
|
# ? May 18, 2018 05:32 |
|
Finger Prince posted:How many of them do you need? Seems like something you could rig a up a small jig made from nails in a board and bend some spring wire around. CNC wire bending is so loving awesome. I can watch those videos for hours.
|
# ? May 28, 2018 03:43 |
|
Kaptainballistik posted:I thought Sloppy mechanics had that kind of slovenly antics well documented? Not an 80s Suzuki ECU. I don't even think they had an EPROM or any actual NVRAM, GM ECUs are completely re-writable including technically the OS itself.
|
# ? May 28, 2018 07:05 |
|
The capability of an ECU varies pretty wildly between date and manufacturer.
|
# ? May 28, 2018 11:38 |
|
Yeah, the Swift GTIs are running a nice little 27C256 or 27C128 EPROM chipset: Nothing mindblowing by today's standards but you can do some pretty incredible things with them; there are quite a few very refined fuel and ignition maps for these cars with only small gaps in performance to full standalone units. These engines have incredibly good aftermarket support despite being reasonably uncommon. Still waiting on the cams, they should be ground and shipped out this week. It took a full two weeks for the cores to clear customs on the way to Canada, probably harder to get them back in the states again. In the meantime I've been fooling around with the interior (interior panels, HVAC, wiring routing, etc) and attempting to make a new throttle body bellcrank/cam from scratch to fix the pedal ratio in the most roundabout way possible. Nothing pretty to post just yet, my shop is a complete disaster thanks to all of the flooding in western North Carolina routing itself through my basement. MonkeyNutZ fucked around with this message at 22:59 on May 29, 2018 |
# ? May 29, 2018 22:51 |
|
Anti-archives bump, working on a big ole post for this week https://www.youtube.com/watch?v=YUEVN2GzarQ MonkeyNutZ fucked around with this message at 23:45 on Aug 21, 2018 |
# ? Aug 21, 2018 22:30 |
|
Oh man, that's going to be cool as hell. Can't wait to see this thing running
|
# ? Aug 22, 2018 04:50 |
|
My body is ready.
|
# ? Aug 22, 2018 04:51 |
|
Two Forties Racing update: Came to the conclusion that despite the cage updates my ridiculously long torso was incompatible with the 240; my last race would be the ChampCar national championship race at the National Corvette Museum motorsports park. Even with the added rally car style roof vents the 110°F+ temperatures were by far the biggest challenge to overcome that weekend due to our lack of cool suits. The car performed incredibly well with the exception of fuel starvation issues dropping our stint times to an uncompetitive 45 minutes and the unfathomable heat at one point boiling all of the fuel in the tank. Seeing as it was the last few minutes of my last ever stint in the car I decided to unleash all ~140hp and managed eke out our fastest lap of the weekend: https://www.youtube.com/watch?v=yVuhS6o1x3Y We managed 21 out of 56 overall and second place in our class with barely any time wasted in the pits, couldn't have gone better. Ford F-250 1X4 On Road Edition update: Made a new 3" exhaust from the manifolds back with a 10,000 GVWR cat and cheapo thrush muffler to replace the pile of garbage and melted cats it had before, new floors finally installed (don't tell anyone I used panel adhesive instead of welding), completely trashed and heehawed pedal box replaced, new MAP, TPS, thermostat + housing, and more. Went from 7-9 mpg last year up to 16 mpg this week after fixing all of this garbage I also went and checked out the mindblowingly cool local scrapyard (worth a separate post) and picked up some steel for various projects One of which is this 200lb stand for my tubing bender which uses the truck hitch for anti-rotation and also some brackets that bolt into the bumpers to allow me to carry silly things like 138 feet of 1.5"x0.120" DOM roll cage tubing "That other car I sometimes work on" update: Realized that my throttle body to pedal ratio resulted in a 1" idle-to-WOT full travel, I've spent more hours than I'd like to admit prototyping several different throttle cams to adjust that up to something reasonable while providing slightly non-linear response for better modulation The other catch is that I also have to completely reverse the direction that the throttle cam is pulled from for packaging reasons Several failed attempts taught me some valuable fabrication lessons such as "don't try and make throttle pulley barrels from scratch" I'm down to this beautiful functional prototype that just needs to be vigorously attacked with a die grinder and belt sander to finish. I have the mounting bracket for the throttle cable in CAD but that'll take another scrapyard trip for 1/8" steel plate to finish Mostly done with making the sparse race car style interior panels, started with the doors a while back by adding 21 captive weld nuts at strategic locations around the perimeter and center of the panel Sacrificing some SHCS in the interest of time I made this collection of reverse transfer punches to mark the sheet for the future door panels Install the punches into the captive nuts, flip the sheet onto the door, give it a few taps to transfer the bolt locations, and drill each to size Fastened it down with temporary screws, trimmed the edges, and I'm left with a perfectly concave door panel with no weird kinks in the middle. Still working on my simple lightweight door latch mechanism but I'll add those, the door pulls, and the window straps shortly to finish them up before adding the coverings. I have most of the rear interior paneling in the car done too but I'll wait to post photos until it's all installed and pretty Weirdly at the same time the Project Binky guys were building their masterpiece of an HVAC unit I shat out this little downsized monster on the left to serve as the defroster blower plenum. Obviously some cleanup left to do but it fits snugly behind the dash and lines up perfectly with a fresh air vent on the right as an intake On the drivetrain side of things my ECU tune arrived as did a pair of these beauties Eager to hear what that configuration sounded like I went and ordered a spare set of each and installed them in this rally car I accidentally bought: https://www.youtube.com/watch?v=YUEVN2GzarQ Whoops MonkeyNutZ fucked around with this message at 02:27 on Aug 29, 2018 |
# ? Aug 29, 2018 02:21 |
|
Accidentally
|
# ? Aug 29, 2018 02:51 |
|
You going to stick with sheet metal for door panel or would you consider wood? Might save some weight.
|
# ? Aug 29, 2018 17:18 |
|
Hahaha 1" pedal throw. Imagining trying to drive a car set up like that is cracking me up. Also I totally thought that video you posted earlier was just an example of the cams you bought you found somewhere, not that you bought a whole goddamn car and put the same cams in it!
|
# ? Aug 30, 2018 05:53 |
|
Coredump posted:You going to stick with sheet metal for door panel or would you consider wood? Might save some weight. Nuevo posted:Also I totally thought that video you posted earlier was just an example of the cams you bought you found somewhere, not that you bought a whole goddamn car and put the same cams in it! Oh and I found a trailer for crazy cheap locally so I bought that too, should be handy for getting the Swift up to its first proper stage rally. Usually utility trailers are awful for cars because of the tall sides but the Swift sits high enough off the ground that the doors swing open right over the fenders, rally cars are super convenient The whole fleet fits snugly against my garage after shuffling the big hunks of stone on the right further over I'm splitting ownership with a friend of mine who is also running the 240SX Champcar. We're registered for the Empire State Performance Rally in October but the car needs a small amount of prep before we take it racing; it was rallycrossed back in the day but never stage rallied according to the SCCA logbook. Hopefully we don't die?
|
# ? Sep 3, 2018 14:23 |
|
You have the best collection of vehicles. I want a swift rally car so badly now...
|
# ? Sep 4, 2018 14:26 |
|
MonkeyNutZ posted:I'm splitting ownership with a friend of mine who is also running the 240SX Champcar. We're registered for the Empire State Performance Rally in October but the car needs a small amount of prep before we take it racing; it was rallycrossed back in the day but never stage rallied according to the SCCA logbook. Hopefully we don't die? ESPR has a history of being rough on cars, bring spare suspension or drive to the conditions of the road. Recent road prep pics look better but they don't show you every mile of road. You may want to talk to a NASA scrutineer about the car to see if it needs updates.... but NASA is.... rather lax with regard to tech compared to the other sanctioning bodies so you'll probably be fine to show up with an SCCA book as long as the rest of the car meets the current rules.
|
# ? Sep 4, 2018 15:53 |
|
Gee, I just go whole hog and FIA 253 the car!
|
# ? Sep 5, 2018 12:35 |
|
Kaptainballistik posted:Gee, I just go whole hog and FIA 253 the car! For starters we'd need to bend up, bead roll, and weld in new wider sections of floor to both sides of the center tunnel to be able to fit modern seats and have enough headroom to clear the cage. Bend, notch, and fit proper curved door bars and FIA spec windshield support bars. Make a shedload of oversized taco gussets to meet RA, ARA, NASA, and FIA rules all at once. Add a full X-bar to the main hoop, weld in those taco gussets, and add an extra roof bar to meet the grandfathered cage rules for NASA. Paint the whole drat thing, then get an email back from one of the scrutineers about adding even more gussets, grind the paint off, and weld those in too. Even after all of that work we'd still need to spend two entire days working on seat brackets and mounting plates for the new six point harnesses, that'd be bonkers to do a week before the race. As would fabbing up a passenger side footrest to brace against and importing 165/65-14 gravel rally tires from the UK while also replacing the destroyed trailer tires. The real kicker would be discovering with two days left to go before the 13 hour drive to New York that the trailer suspension is completely worn out and that the rally wheels sold with the car as spares don't actually fit because the factory wheel studs are laughably short. You'd have to be some big dumb idiots to try all of that stuff MonkeyNutZ fucked around with this message at 01:01 on Nov 3, 2018 |
# ? Nov 3, 2018 00:58 |
|
I love it
|
# ? Nov 3, 2018 01:14 |
|
|
# ? Nov 3, 2018 01:54 |
|
Holy poo poo at both the post and this emote.
|
# ? Nov 3, 2018 02:41 |
|
MonkeyNutZ posted:That'd be a boatload of work to try and get done by the end of October for the rally, there's barely even a cage in the car; not even any door bars to speak of. loving heroes. Seriously. Idiots, sure, but heroically idiotic.
|
# ? Nov 3, 2018 08:21 |
|
HandlingByJebus posted:loving heroes. Seriously. Not an empty quote.
|
# ? Nov 3, 2018 13:59 |
|
setting up harnesses is way more work than it seems like it should be
|
# ? Nov 3, 2018 15:58 |
|
You loving legend.
|
# ? Nov 3, 2018 17:23 |
|
MonkeyNutZ posted:The real kicker would be discovering with two days left to go before the 13 hour drive to New York that the trailer suspension is completely worn out So the trailer was cheap for a reason then How does the truck do towing fully loaded? Any towing mods planned? Airlift springs are cheap and work great to level out the load. Super jealous tho man, I really miss my Swift, one of the few cars i regret getting rid of. I bet it's going to make a kick rear end rally car.
|
# ? Nov 3, 2018 17:48 |
|
|
# ? Nov 3, 2018 18:53 |
|
That is absolutely fantastic.
|
# ? Nov 3, 2018 20:12 |
|
|
# ? May 14, 2024 17:18 |
|
Hell fuckin yeah.
|
# ? Nov 5, 2018 18:45 |