|
Ursine Catastrophe posted:I'm confused, where does the shareholder value come in We just need to find a way to generate it, and fortunately there are easy methods to do that. Early this decade there were couple large storms which cut electricity in large area of Finland. As a result electricity market law was changed to include standard reimbursement for outages. 12 to 24 hour outage qualifies the customer for a 10% reimbursement of their annual electricity transfer fee. 24-72h is 25%, 72-120h 50%, and so on up to 200% or 2000€ for outages lasting longer than 288 hours. This gave electricity companies great enthusiasm to start laying more cable underground. I feel this is a good system. It benefits those who suffer from the problem, so it feels fair. It also gives the companies great flexibility on how much they want to invest on their infrastructure, yet it provides a relatively simple ROI calculation. Interestingly, there is a website listing the amount of customers without electricity and map showing in which counties they are. Currently there is a one customer suffering a power outage. Must feel real special being the on house in the country without electricity. Earlier today that company had 620 customers with an outage, so it's an improvement.
|
# ? May 8, 2019 21:57 |
|
|
# ? Jun 8, 2024 08:15 |
|
Saukkis posted:We just need to find a way to generate it, and fortunately there are easy methods to do that. Early this decade there were couple large storms which cut electricity in large area of Finland. As a result electricity market law was changed to include standard reimbursement for outages. 12 to 24 hour outage qualifies the customer for a 10% reimbursement of their annual electricity transfer fee. 24-72h is 25%, 72-120h 50%, and so on up to 200% or 2000€ for outages lasting longer than 288 hours. This gave electricity companies great enthusiasm to start laying more cable underground. I feel this is a good system. It benefits those who suffer from the problem, so it feels fair. It also gives the companies great flexibility on how much they want to invest on their infrastructure, yet it provides a relatively simple ROI calculation. PG&E: “If your house burns down then there’s no address to restore service to, ergo”
|
# ? May 8, 2019 22:02 |
|
Saukkis posted:We just need to find a way to generate it, and fortunately there are easy methods to do that. Early this decade there were couple large storms which cut electricity in large area of Finland. As a result electricity market law was changed to include standard reimbursement for outages. 12 to 24 hour outage qualifies the customer for a 10% reimbursement of their annual electricity transfer fee. 24-72h is 25%, 72-120h 50%, and so on up to 200% or 2000€ for outages lasting longer than 288 hours. This gave electricity companies great enthusiasm to start laying more cable underground. I feel this is a good system. It benefits those who suffer from the problem, so it feels fair. It also gives the companies great flexibility on how much they want to invest on their infrastructure, yet it provides a relatively simple ROI calculation. That would be nice to do here in murica but the prevailing argument would be. "We can punish corporations or they will cut jobs" aka maybe their executives makes slightly under Extremely Ludicrious Filthy Money. *quickedit* if I recall the American Gov't actually used to do this, like when the railroads were being constructed they gave money with contractual obligations and fairly stiff penalties if they were not met. MF_James fucked around with this message at 22:15 on May 8, 2019 |
# ? May 8, 2019 22:13 |
|
fixed some ticking bombs around the house today. why, grandpa fred? WHYYYY?
|
# ? May 9, 2019 00:56 |
|
shame on an IGA posted:fixed some ticking bombs around the house today. i hate to be that guy but that exposed romex is a ticking bomb. you should have set the box over the hole in the siding with the wire coming in the back and then caulked around the exterior to make it waterproof. its an improvement but mains voltage wires out in free air is dangerous and not up to code. edit: oh i just saw your posts about it in the electrical bullshit thread. nevermind, carry on. i'm glad you're aware of this and intend to fix the rest of it too. Mimesweeper fucked around with this message at 02:58 on May 9, 2019 |
# ? May 9, 2019 02:52 |
|
Ornamental Dingbat posted:Forklift operator did not see the guy crouching by a dock door and pinned him then raised the mast. This raises even more questions,questions that i don't want answering.
|
# ? May 9, 2019 04:22 |
|
Brazilianpeanutwar posted:This raises even more questions,questions that i don't want answering. Raises more than questions imo
|
# ? May 9, 2019 04:37 |
|
shame on an IGA posted:WHYYYY? IP44?
|
# ? May 9, 2019 06:55 |
|
https://www.liveleak.com/view?t=8d0_1509228214
|
# ? May 9, 2019 07:16 |
|
Why would you not lay the tile flat?
|
# ? May 9, 2019 07:30 |
|
Megillah Gorilla posted:Why would you not lay the tile flat? Doors probably would have just gone over it. I assume he was trying to trigger the obstruction/resistence sensor to keep the doors open vs actually propping it open; if something heavy enough to do enough damage to jolt the doors like that didn’t trip any safety sensor at all then
|
# ? May 9, 2019 07:37 |
|
Ursine Catastrophe posted:Doors probably would have just gone over it. I assume he was trying to trigger the obstruction/resistence sensor to keep the doors open vs actually propping it open; if something heavy enough to do enough damage to jolt the doors like that didn’t trip any safety sensor at all then The doors couldn't have gone over it, elevator doors run in tracks. Laying it flat would have prevented the doors from closing, leaving it upright allowed the doors close enough together for the doors to be considered closed by the elevator controller.
|
# ? May 9, 2019 09:50 |
|
How are they getting him to pay? The elevator ate that dude
|
# ? May 9, 2019 10:02 |
|
Its only the doors that close. the outside still exists.
|
# ? May 9, 2019 10:03 |
|
the angry baby will develop object permanence eventually
|
# ? May 9, 2019 10:20 |
|
|
# ? May 9, 2019 23:37 |
|
Groda posted:IP44? 50 at best, there was no seal of any kind on the back of the faceplate.
|
# ? May 10, 2019 00:29 |
|
|
# ? May 10, 2019 03:31 |
|
that's why they call them jack stands
|
# ? May 10, 2019 04:40 |
|
|
# ? May 10, 2019 05:19 |
|
Not the outcome I was expecting when I started watching this one.
|
# ? May 10, 2019 14:23 |
|
https://i.imgur.com/thsTwzA.mp4
|
# ? May 10, 2019 17:50 |
|
I mean, it's not wrong...
|
# ? May 10, 2019 18:08 |
|
I would need to know the capacity of the stand before I deem this safe or unsafe.
|
# ? May 10, 2019 20:36 |
|
That stand got feet right? Does it make a difference if the load is on a structural part other than those meant to take that load?
|
# ? May 10, 2019 20:46 |
|
Structurally it's probably fine, I'd be very worried about slippage though. Besides, you never, ever want to work under a jack anyway.
|
# ? May 10, 2019 21:03 |
|
spankmeister posted:Structurally it's probably fine, I'd be very worried about slippage though. spankmeister posted:Besides, you never, ever want to work under a jack anyway. What you talking about? The recommendation is to always use axle stands when you use a jack and he's clearly doing that.
|
# ? May 10, 2019 21:42 |
It is a little interesting that the wheels are still on the ground (I guess we can't actually be sure about the one he's working at, but it LOOKS like it is), looks like he just wanted to stretch the suspension out a bit. But still, everyone knows you're supposed to use a bit of rotted 4x4 post instead of the jack stand there.
|
|
# ? May 10, 2019 21:43 |
|
Bad Munki posted:It is a little interesting that the wheels are still on the ground (I guess we can't actually be sure about the one he's working at, but it LOOKS like it is), looks like he just wanted to stretch the suspension out a bit. But still, everyone knows you're supposed to use a bit of rotted 4x4 post instead of the jack stand there. If you look closely, you can see he's using both!
|
# ? May 11, 2019 03:42 |
Oh poo poo you’re right. A true master of the art.
|
|
# ? May 11, 2019 04:06 |
|
|
# ? May 11, 2019 05:06 |
|
https://i.imgur.com/FSuXlgw.mp4
|
# ? May 11, 2019 14:28 |
|
Ground and water are united in their hatred of the aerodynamic blasphemy we call helicopters, and the life-rings have joined them.
|
# ? May 11, 2019 15:04 |
|
Icon Of Sin posted:Ground and water are united in their hatred of the aerodynamic blasphemy we call helicopters, and the life-rings have joined them. This is silly. Ground and water are inanimate things that cannot possibly hate. But helicopters can.
|
# ? May 11, 2019 15:15 |
|
Warbadger posted:water cannot possibly hate. My dude have you ever heard of this little thing we call "the sea?"
|
# ? May 11, 2019 15:17 |
https://imgur.com/gallery/yNJUXcC Foreman orders oil rig workers to line up an open flowing pipe.
|
|
# ? May 11, 2019 16:32 |
|
Admiral Joeslop posted:https://imgur.com/gallery/yNJUXcC
|
# ? May 11, 2019 18:00 |
|
The dashcam video is pretty funny. https://www.youtube.com/watch?v=v8b9mwSVBGs
|
# ? May 11, 2019 18:32 |
|
Complications posted:The dashcam video is pretty funny. This is amazing. The slowest car chase ever!
|
# ? May 11, 2019 18:48 |
|
|
# ? Jun 8, 2024 08:15 |
|
https://i.imgur.com/nhAsvBv.mp4 i know
|
# ? May 11, 2019 19:10 |