|
Hubis posted:Those are all some really good points. The table saw does seem like it can do a ton of different things, but I actually had an opportunity to try some of the exact things you mentioned (ripping long/sheet goods, wide cross-cuts, shaving to sneak up on a fit) and it was incredibly awkward. A variety of sleds / guides / feed tables could make it easier, but in all cases I'd probably have been better off with either a miter/chop saw or a track/band saw. MANmadeDIY for MEN who refer to sawdust as MANglitter. And do dumb poo poo with table saws. Table saws are really pretty safe if you don’t do dumb poo poo with them. Someone posted a tablesaw as face jointer rig here a few months ago and it was I guess there’s no liability as a YouTube content creator if people mail themselves following your advice and maim themselves? A marginally less dangerous (but still fairly dangerous) planer is to get a surface planing bit for a drill press. It’s like a fly cutter for wood, only with more kickback and fingat slicing potential. That being said drill presses are awesome and I don’t know where I would be without one. The ability to reliably make a hole square to a surface at a consistent depth is very useful. It’s a mortiser and a doweller and a spindle sander and a planer and a hole driller! My old boss’s old boss always said the three most essential woodworking tools were a bandsaw, a jointer, and a drill press, in that order. Harry Potter on Ice posted:We don't get cold enough to get thick ice here often so when we do I like to make "art" sculptures with it and then it melts and disappears, its great! No clean up required. If you want to see someone do it really well in my opinion look up the fella's ice art I mentioned in the post you quoted
|
# ? Jan 12, 2020 06:01 |
|
|
# ? Jun 13, 2024 05:27 |
|
A drill press as a planer is a horrible idea. Also a jointer is probably the last machine to get, there are so many other ways of getting straight edges on a board. I'd put the list at table saw, thickness planer, bandsaw. But it really all depends on what kind of woodworking your doing. 75% of woodworking is figuring out how to make a cut with the tools on hand.
|
# ? Jan 12, 2020 07:19 |
|
Woodworking is two‐thirds measuring.
|
# ? Jan 12, 2020 07:21 |
|
JEEVES420 posted:A drill press as a planer is a horrible idea. I've seen bits like that in guitar repair/luthier supply catalogs. I could see it maybe making sense in that context, where you are trying to get precise thicknesses of small pieces. Still seems like a lot of "unprotected spinny choppy bits" to me, though.
|
# ? Jan 12, 2020 11:00 |
|
Platystemon posted:Woodworking is
|
# ? Jan 12, 2020 13:11 |
|
Kaiser Schnitzel posted:A marginally less dangerous (but still fairly dangerous) planer is to get a surface planing bit for a drill press. It’s like a fly cutter for wood, only with more kickback and fingat slicing potential. Strictly speaking it's like a face mill for wood but let's not accidentally summon the metalworkers.
|
# ? Jan 12, 2020 13:21 |
|
Drill presses aren’t intended to take much in the way of non‐axial loads. That’s the weak point, so keep it in kind. Use a bit of modest size, go slowly, and stick to soft materials. Platystemon fucked around with this message at 14:46 on Jan 12, 2020 |
# ? Jan 12, 2020 13:46 |
|
Platystemon posted:Drill presses aren’t intended to take much in the way of radial loads. Wait are we still talking about drill presses?
|
# ? Jan 12, 2020 14:04 |
|
Hubis posted:I've seen bits like that in guitar repair/luthier supply catalogs. I could see it maybe making sense in that context, where you are trying to get precise thicknesses of small pieces. Still seems like a lot of "unprotected spinny choppy bits" to me, though.
|
# ? Jan 12, 2020 14:56 |
|
Forgetting the best part about that is the name safe-t-planer https://www.stewmac.com/Luthier_Tools/Types_of_Tools/Planes/StewMac_Safe-T-Planer.html My dad said they used to make one that would mount on radial arm saws as well if the drill press is just too safe for your particular blood lust.
|
# ? Jan 12, 2020 15:06 |
|
Platystemon posted:Woodworking is two‐thirds measuring. "Nominal" two-thirds
|
# ? Jan 12, 2020 17:17 |
|
Harry Potter on Ice posted:We don't get cold enough to get thick ice here often so when we do I like to make "art" sculptures with it and then it melts and disappears, its great! No clean up required. If you want to see someone do it really well in my opinion look up the fella's ice art I mentioned in the post you quoted I didn't even see that. I thought you wanted to liberate the fish or summat Let mah Frozen Fishies Fly Free JEEVES420 posted:A drill press as a planer is a horrible idea. Straight & clean, fella. Anyone who glues up boards fresh ripped and say their table saw cleans it up good enough to glue up a panel, well I got some scorn for that. Mr. Mambold fucked around with this message at 18:31 on Jan 12, 2020 |
# ? Jan 12, 2020 18:29 |
|
Jaded Burnout posted:Strictly speaking it's like a face mill for wood but let's not accidentally summon the metalworkers. CNC spoilboard bits. They are face mill bits for wood. Mr. Mambold posted:Straight & clean, fella. Anyone who glues up boards fresh ripped and say their table saw cleans it up good enough to glue up a panel, well I got some scorn for that. But that's exactly how it's done 1. Run a board edge and face through jointer 2. Run opposite face through planer 3. Run opposite edge through *table saw 4. Marvel at you perfectly squared up board *A proper cabinet saw, not an underpowered jobsite saw.
|
# ? Jan 12, 2020 19:14 |
|
JEEVES420 posted:But that's exactly how it's done These days my process is more like: 1. Buy only boards without visible twist 2. Run board through thickness planer (both sides) 3. Use hand plane to flatten and square one edge 4. Measure board minimum width, mark it off. 5. Plane to the markings on the other edge. It's slow, sure, but my volume is low enough that it doesn't really matter.
|
# ? Jan 12, 2020 20:57 |
|
Sorry guys I infected the tread with Grandpa wood working chat Can someone please remind me what color of cordless drill is the best to get us back on track?
|
# ? Jan 13, 2020 04:10 |
|
What's your favorite color? I don't think there's a significant difference in build quality (at least not for drills), so either stick with a system you already have batteries for, or choose a system based on it having tools you think you'll buy in the future.
|
# ? Jan 13, 2020 04:31 |
|
Is a benchtop jointer worth it? If so, recommendations?
|
# ? Jan 13, 2020 17:00 |
|
Hubis posted:Sorry guys I infected the tread with Grandpa wood working chat Red.
|
# ? Jan 13, 2020 22:05 |
|
Ferrule posted:
FTFY EDIT: whatever you have batteries for.
|
# ? Jan 13, 2020 22:17 |
|
wandler20 posted:Is a benchtop jointer worth it? If so, recommendations? Shorter the bed harder it is to get a flat even surface, especially on longer boards. But you trade off shop space and price for that. Rikon is one of the few benchtop that offer helical heads. You can generally find a decently priced used 6" long bed jointer on craigslist if your patient.
|
# ? Jan 13, 2020 22:36 |
|
JEEVES420 posted:Shorter the bed harder it is to get a flat even surface, especially on longer boards. But you trade off shop space and price for that. Rikon is one of the few benchtop that offer helical heads. I'll check out the Rikon. Unfortunately I live in a pretty rural area so I doubt I'll come across anything but I'll certainly check it out.
|
# ? Jan 13, 2020 23:04 |
|
Hubis posted:Sorry guys I infected the tread with Grandpa wood working chat Hitachi Green (NO Ryobi puke green)
|
# ? Jan 14, 2020 02:49 |
|
~Coxy posted:Hitachi Green (NO Ryobi puke green) Surely you meant Festool.
|
# ? Jan 14, 2020 02:54 |
|
Black, like everything
|
# ? Jan 14, 2020 02:55 |
|
Ferrule posted:Surely you meant Festool. Ahh, Money Green.
|
# ? Jan 14, 2020 03:05 |
|
taqueso posted:Black, like everything This is the only objectively wrong answer to that question
|
# ? Jan 14, 2020 03:16 |
|
Transparent tools with RGB when?? e: actually I bet it's really soon, the people that grew up with rgb computers are buying tools now Razer Deathdriver 4000
|
# ? Jan 14, 2020 03:22 |
|
How about some CNC'd House Joinery: https://www.instagram.com/p/B7J9ksuhNEo/?igshid=1nkzg79folj87
|
# ? Jan 14, 2020 14:43 |
|
Ferrule posted:Surely you meant Festool. Festool must have been paying 'This Old House' for product placement for a while recently, and I would always laugh when Tom would bust out that pathetic Festool 564274 CXS drill/driver. It sounded like it had serious trouble trying to drive even the smallest screws, and it looks like, and probably has the same torque as, a 5 year old's toy drill. That Fez-Stool driver is $300, and it has 1/3 of the max torque of the base-model Milwaukee M12 drill/driver that retails for less than $100. You could probably grab a $30 Black and Decker drill at Walmart that would beat the pants off that thing: Junk for people with more money than sense (like SnapOn power tools.)
|
# ? Jan 14, 2020 15:20 |
|
B-Nasty posted:Junk for people with more money than sense (like SnapOn power tools.) I don't think you understand snap-on's business model. They are a finance company, not a tool company.
|
# ? Jan 14, 2020 15:58 |
|
Motronic posted:I don't think you understand snap-on's business model. They are a finance company, not a tool company. Hey, that’s Sears’ gig. Oh no. Snap‐On is doomed.
|
# ? Jan 14, 2020 16:03 |
|
B-Nasty posted:Festool: Junk for people with more money than sense (like SnapOn power tools.) Have you tried their sanders out?
|
# ? Jan 14, 2020 16:17 |
|
Harry Potter on Ice posted:Have you tried their sanders out? I admit that I have not, but I highly doubt they deserve the huge premium they price at compared to a top-of-the-line blue/red/yellow model. For lithium battery tools, there is no comparison to the high-end brushless models from the usual guys. TTI vs. Stanley/BD vs Bosch vs Makita competition has really delivered some amazing tools for reasonable prices.
|
# ? Jan 14, 2020 17:02 |
|
B-Nasty posted:I admit that I have not, but I highly doubt they deserve the huge premium they price at compared to a top-of-the-line blue/red/yellow model. For lithium battery tools, there is no comparison to the high-end brushless models from the usual guys. TTI vs. Stanley/BD vs Bosch vs Makita competition has really delivered some amazing tools for reasonable prices. I'm not disagreeing with any of that I'm just extremely interested in their vibration dampening features which is supposedly leagues better than any of the usual suspects
|
# ? Jan 14, 2020 17:13 |
|
Their Sanders and paper are miles above. If I had a couple Grand to waste I'd get a dust collector and orbital Sanders. The dust collection, anti vibration, and sheer control of the sander make several hours on the tool a breeze. Festool battery powered tools are poo poo though
|
# ? Jan 14, 2020 17:21 |
|
Are orbital sanders improved over the past decade? I've been using a 10+ year old craftsman for my current project and I have to take breaks every 10 - 15 minutes. I've been thinking about upgrading but wasn't sure if the returns would be worth it.
|
# ? Jan 14, 2020 18:45 |
|
I found a huge difference when I switched to Abranet abrasives and backing pads for woodworking. It made my old R/O sander work better, and the dust control is so much better. I bought a Fein vacuum recently, along with the best-in-reasonably-priced-class corded Bosch sander for some upcoming projects. Abranet really makes a difference, though.
|
# ? Jan 15, 2020 02:55 |
|
I picked up a 48" box level yesterday but having used it once now I'm like why the hell doesn't this thing have a ruler on it like my 24"? Looking at HD's website none of the ones in store yesterday had a ruler but this one does: https://www.homedepot.com/p/Kapro-48-in-Exodus-Professional-Box-Level-with-45-Vial-and-Ruler-770-42-48/303636595 Going to order it shipped to store and return the old one. But my wallet is downstairs so I'll do it tomorrow, ~12 hours to tell me how it's actually a terrible idea or whatever for reasons I haven't thought of.
|
# ? Jan 20, 2020 06:28 |
|
tangy yet delightful posted:I picked up a 48" box level yesterday but having used it once now I'm like why the hell doesn't this thing have a ruler on it like my 24"? Looking at HD's website none of the ones in store yesterday had a ruler but this one does: Call the store before ordering and verify that you can exchange it. HD online storefront is a completely different company than the brick and mortar stores. They will ship it to the store but that is about as far as the stores involvement with the transaction goes. FWIW if the item is not on the shelf at a local HD I will not buy it from them.
|
# ? Jan 20, 2020 16:30 |
|
|
# ? Jun 13, 2024 05:27 |
|
JEEVES420 posted:Call the store before ordering and verify that you can exchange it. HD online storefront is a completely different company than the brick and mortar stores. They will ship it to the store but that is about as far as the stores involvement with the transaction goes. Ah I wasn't too concerned with being able to exchange it since it's all credit card purchases for me so it'd wash out all the same by time the CC statement comes out. But that's a good heads up regardless. I hadn't thought to look elsewhere figuring a box level would be expensive to ship but turns out amazon has it for the same price so guess I'll give my money to that billionaire instead
|
# ? Jan 20, 2020 18:31 |