|
NewsGroupDirect used to be a reseller of a larger network with 3500+ days retention, but they split off and became an independent provider. As such their retention went to poo poo, purporting to be 1100 days but I find even that to be unreliable.. I find they're good for recent stuff, and they max out my 600 meg connection, but you'll eat up blocks like crazy if you try to get anything older than 1000 days.
|
# ? Feb 20, 2020 15:17 |
|
|
# ? Jun 5, 2024 03:34 |
|
Canuckistan posted:NewsGroupDirect used to be a reseller of a larger network with 3500+ days retention, but they split off and became an independent provider. As such their retention went to poo poo, purporting to be 1100 days but I find even that to be unreliable.. UGH, that's why the older downloads suck lately! i did not know they did that!
|
# ? Feb 20, 2020 15:41 |
|
Jesse Iceberg posted:That's awesome, thanks for that, that gives me a really good jumping off point to start converting. This here string: - --certificatesresolvers.leresolver.acme.dnsChallenge=true Tells Traefik and LetEncrypt how to validate that you actually own the Domain that you are added certs for. I use the Godaddy API to allow Traefik to login and check to verify I own it. You can also use a different check called "tls challenge" (documented here: https://docs.traefik.io/https/acme/) that tells Treafik to just resolve that hostname and test. This requires you to have 443 open from that hostname's IP and it has to get back to Traefik. I did not use that because I didn't initially have Oauth setup, and it would have required me to open my network to traffic before it was secure enough.
|
# ? Feb 20, 2020 15:58 |
|
You really want more than one unlimited provider (with different back-ends) at the same priority level in your downloader for the best chance at completing all your downloads. Also add in one or two obscure provider's block accounts as a lower priority and you're golden! I've posted an older version of this before, but here's my current SAB server list and their usage (yes I know some of the providers have the same back-ends, but this represents some overlapping yearly accounts and such) PS: Giganews sucks now, I'll be canceling that soon
|
# ? Feb 20, 2020 16:38 |
|
I have to say, SAB looks a lot nicer than NZBGET. Tempted to switch.
|
# ? Feb 20, 2020 16:48 |
|
Matt Zerella posted:I have to say, SAB looks a lot nicer than NZBGET. Tempted to switch. It’s certainly pretty nice, the settings pages can be a bit intimidating setting up for the first time. I set it up never having done anything with NZBs before, but I was able to get it running after an hour or 2.
|
# ? Feb 20, 2020 17:02 |
pzy posted:You really want more than one unlimited provider (with different back-ends) at the same priority level in your downloader for the best chance at completing all your downloads. Also add in one or two obscure provider's block accounts as a lower priority and you're golden! Is there a way to emulate this data output or a close equivalent for nzbget?
|
|
# ? Feb 20, 2020 17:04 |
|
That Works posted:Is there a way to emulate this data output or a close equivalent for nzbget? i think nzbhydra does stuff like this, possibly even prettier
|
# ? Feb 20, 2020 17:24 |
|
Canuckistan posted:NewsGroupDirect used to be a reseller of a larger network with 3500+ days retention, but they split off and became an independent provider. As such their retention went to poo poo, purporting to be 1100 days but I find even that to be unreliable.. That sucks but luckily they offer 3 month trial (or close to it with the first 3 months being sub half a dollar) so I might cancel it. Lot of time I want to download the original BD disk and those are mostly gone. Posted on the previous page but Newshosting seems (on paper) to have high retention. Does it match reality? Personally I don't download enough to warrant several providers at once so I'm looking for the best overall. Right now I only have 300 Mbps so it doesn't need to support anything higher than that.
|
# ? Feb 20, 2020 17:39 |
|
pzy posted:You really want more than one unlimited provider (with different back-ends) at the same priority level in your downloader for the best chance at completing all your downloads. I dont understand why all are priority 0 since arent they all downloading together at once and not really showing you who is really helping who? basically if one was set at priority 0 and then 1 and 2 and 3 etc you would be abl;e to see as it goes down the line and tries one after the other if it really needs to so it can complete.
|
# ? Feb 20, 2020 19:10 |
|
lordfrikk posted:That sucks but luckily they offer 3 month trial (or close to it with the first 3 months being sub half a dollar) so I might cancel it. Lot of time I want to download the original BD disk and those are mostly gone. NGD sucks when it comes down to it for anything oldish and in that case idk why anyone would bother when they can get old and new from the same provider elsewhere. if you dont want to or dont need to pay for multiple at once there is frugal usenet which has two providers so you have that benefit. it has what ngd used to have for server access plus usenetfarm access in one. only drawback is like 3000 days retention but newshosting has full retention but you may have dmca takedowns on the old posts just the same.
|
# ? Feb 20, 2020 19:17 |
|
SlipperyNipple posted:I dont understand why all are priority 0 since arent they all downloading together at once and not really showing you who is really helping who? basically if one was set at priority 0 and then 1 and 2 and 3 etc you would be abl;e to see as it goes down the line and tries one after the other if it really needs to so it can complete. I think I am doing it correctly, if the SAB wiki is accurate: quote:SABnzbd will first try to get articles from the group of servers with the highest priority. Within the priority group, the first server with a free connection will be tried. When the first tried server doesn't have an article, then another server with the same priority is tried. So according to that, unlimited servers should be your highest priority and all the same, and block accounts/fill servers/non-unlimited should be lower priorities. SAB is always maxed out fully on all allowed connections on my 0-priority servers, no problem saturating a full gigabit down on any request
|
# ? Feb 20, 2020 19:41 |
|
pzy posted:I think I am doing it correctly, if the SAB wiki is accurate: I'm interpreting your screenshot the same way SlipperyNipple is. You have 5 that are set to priority 0, but that doesn't tell it which one of those 5 to use first. I don't think they will do it based on the literal order you have either, so you'll likely have a race condition here (no idea how it determines which one of those 5 it will use first, but I suspect Giganews is definitely not first). The only way to know for sure if Giganews isn't working for you is to leave it at P0, the other unlimited ones at P1, then your blocks at P2.
|
# ? Feb 20, 2020 21:07 |
|
I'll set them all as different priorities for a month and see what changes, sounds sciencey Edit: The immediate problem is that it only downloads from the server with the highest priority, so if that can't saturate your connection it will be pretty slow. The equal priority race condition is a lot faster since it downloads from all 0-priority servers at once, and I don't think it would lose any articles since it goes down the line looking for any missing ones (eventually hitting the block account) pzy fucked around with this message at 21:30 on Feb 20, 2020 |
# ? Feb 20, 2020 21:18 |
|
pzy posted:I'll set them all as different priorities for a month and see what changes, sounds sciencey newshosting should be able to saturate your gigabit connection and ninja is the same as newshosting so make both of those priority 0. with all those connections gigabit shouldbe no sweat. yes do it for science! lol it may be worth trying a new order the following month.
|
# ? Feb 20, 2020 22:26 |
|
Yeah I'm usually in the 95-98MB/sec range with NH, it's nice they're actually giving decent speeds these days without too much tweaking.
|
# ? Feb 20, 2020 22:32 |
|
Bank posted:I'm interpreting your screenshot the same way SlipperyNipple is. You have 5 that are set to priority 0, but that doesn't tell it which one of those 5 to use first. I don't think they will do it based on the literal order you have either, so you'll likely have a race condition here (no idea how it determines which one of those 5 it will use first, but I suspect Giganews is definitely not first). The only way to know for sure if Giganews isn't working for you is to leave it at P0, the other unlimited ones at P1, then your blocks at P2. There's no race condition, it'll just balance the connections across different servers while downloading. The ordering displayed within a priority is just alphabetic.
|
# ? Feb 21, 2020 00:20 |
|
What's a good guideline for file size cut offs in radar? I'm getting tired of 40GB+ files being pulled for 1080p movies
|
# ? Feb 21, 2020 10:30 |
|
If you just set 1080p to anything under 18gb you'll never get a remux You just have to be careful because I find that multi language dts-ma rips can still be quite large. Edit: have you checked your quality profiles? The default has 1080p cutoff at bluray-1080 but allows remux 1080p norp fucked around with this message at 13:24 on Feb 21, 2020 |
# ? Feb 21, 2020 13:21 |
|
Remux is the ONLY way to roll
|
# ? Feb 21, 2020 13:25 |
|
Vykk.Draygo posted:Remux is the ONLY way to roll Please don't kinkshame in this thread
|
# ? Feb 21, 2020 16:45 |
|
Vykk.Draygo posted:Remux is the ONLY way to roll Yep now that I have 500Mb internet why the hell not, also delete after watching, by the time you want to rewatch there will be a better rip.
|
# ? Feb 21, 2020 17:23 |
|
Perplx posted:Yep now that I have 500Mb internet why the hell not, also delete after watching, by the time you want to rewatch there will be a better rip. There is no better quality than a remux tho, is there?
|
# ? Feb 21, 2020 17:37 |
|
I've been attempting to upgrade the quality on a lot of movies I downloaded many years ago. A pretty large percentage of them are DMCA'ed to hell nowadays and I won't be able to get them in a higher quality from usenet. (I got accounts across all the backbones to make this as painless as possible) I always knew this was a possibility which is why I don't delete after watching. Another possibility is laws and enforcement changes and the usenet gravy train goes away.
|
# ? Feb 21, 2020 18:03 |
|
What's the point of Remuxes? I just can't seem to understand why I'd want a 45GB rip of a 1080p movie, as previous poster suggested. 10GB BluRay rips seems to be just fine? Why are they so massive? Is it just higher quality than BR somehow?
|
# ? Feb 21, 2020 18:10 |
|
Henrik Zetterberg posted:What's the point of Remuxes? I just can't seem to understand why I'd want a 45GB rip of a 1080p movie, as previous poster suggested. 10GB BluRay rips seems to be just fine? Why are they so massive? Is it just higher quality than BR somehow? It's a direct rip of the BR without recompression. It's exact same quality as the BR.
|
# ? Feb 21, 2020 18:15 |
|
Henrik Zetterberg posted:What's the point of Remuxes? I just can't seem to understand why I'd want a 45GB rip of a 1080p movie, as previous poster suggested. 10GB BluRay rips seems to be just fine? I have a decent amount of storage space available and a pretty good TV, so I always go for the highest available quality even if the difference isn't very big.
|
# ? Feb 21, 2020 18:19 |
|
Incessant Excess posted:There is no better quality than a remux tho, is there? There are still remasters and criterion copies, and the inventible 8k rerelease.
|
# ? Feb 21, 2020 18:26 |
|
Incessant Excess posted:I have a decent amount of storage space available and a pretty good TV, so I always go for the highest available quality even if the difference isn't very big. Thermopyle posted:It's a direct rip of the BR without recompression. It's exact same quality as the BR. Ah, thanks. Yeah I've got a 75" 4K TV and a 55" 1080P, but since my old-rear end Plex PC chokes on 4K content, I try to stick with 1080P rips. I did sign up for a month of Plex Pass to see if the hardware transcoding helps at all (Ivy Bridge), but haven't had a chance to check it out yet. I may have to just bite the bullet and upgrade my Plex server PC. Or upgrade the guts of my unraid machine and learn all the docker crap.
|
# ? Feb 21, 2020 20:06 |
|
Thermopyle posted:It's a direct rip of the BR without recompression. It's exact same quality as the BR. Yes, basically the same thing as ripping (or downloading) music in lossless or MP3/AAC, although a remux is still technically in a lossy codec since lossless video codecs would be massive. You will very likely be unable to tell the difference, but it eliminates the chances that the person encoding the 10GB file made some poor encoding choices, etc.
|
# ? Feb 21, 2020 20:18 |
|
BeastOfExmoor posted:You will very likely be unable to tell the difference, but it eliminates the chances that the person encoding the 10GB file made some poor encoding choices, etc. Yeah, this is the main reason I get remuxes. A well done re-encode is mostly indistinguishable from the source BR, but there's no way to tell radarr/sonarr "only download well done reencodes".
|
# ? Feb 21, 2020 21:26 |
|
Thermopyle posted:Yeah, this is the main reason I get remuxes. A well done re-encode is mostly indistinguishable from the source BR, but there's no way to tell radarr/sonarr "only download well done reencodes". if you know which groups do good encodes you could set it to get ones from said groups using the tags feature. food for thought.
|
# ? Feb 21, 2020 22:10 |
|
Henrik Zetterberg posted:Ah, thanks. even tho 4K titles are big, direct playing should do fine on your tv. there is no transcoding going on during a direct play. is your tv hard wired or wireless?
|
# ? Feb 21, 2020 22:12 |
|
derk posted:even tho 4K titles are big, direct playing should do fine on your tv. there is no transcoding going on during a direct play. is your tv hard wired or wireless? Well, it chokes transcoding 4K content down to 1080P for the smaller TV. Both TVs are running Apple TV / Plex on wireless, both have full signals.
|
# ? Feb 21, 2020 22:27 |
|
derk posted:if you know which groups do good encodes you could set it to get ones from said groups using the tags feature. food for thought. Yeah, I've actually done this for a few groups in the past, but I can't be assed to keep track of which groups sourced which files and compare the quality of different groups over time. I just set my remux quality on movies that I care enough to have the highest quality and don't worry about it.
|
# ? Feb 22, 2020 00:09 |
|
Henrik Zetterberg posted:Well, it chokes transcoding 4K content down to 1080P for the smaller TV. Both TVs are running Apple TV / Plex on wireless, both have full signals. yea, transcoding 4k files is going to choke just about anything. don't offer the 4K movies to non 4K devices that can direct play them. Like i have a separate library for 4K movies, and only certain users have access to that library that i have set up their clients to play those files directly so it does NOT transcode them.
|
# ? Feb 22, 2020 03:53 |
|
Thermopyle posted:Yeah, I've actually done this for a few groups in the past, but I can't be assed to keep track of which groups sourced which files and compare the quality of different groups over time. i manually download my movies instead of leaving that up to radarr. I don't have time to keep track of movies i want to see and never have the need to have them right away.
|
# ? Feb 22, 2020 03:56 |
|
derk posted:yea, transcoding 4k files is going to choke just about anything. don't offer the 4K movies to non 4K devices that can direct play them. Like i have a separate library for 4K movies, and only certain users have access to that library that i have set up their clients to play those files directly so it does NOT transcode them. Yup this is how I do it too. I usually have 1080p versions of anything in my 4K library for external people via radarr and I grab the 4Ks for myself manually.
|
# ? Feb 22, 2020 04:08 |
|
derk posted:I don't have time to keep track of movies i want to see and never have the need to have them right away. Funny, this is the exact reason I use radarr. I read about or hear about a movie that sounds interesting, I add it to radarr, and never think about it again until I see it pop up in Kodi at some point in the future as a new addition.
|
# ? Feb 22, 2020 05:07 |
|
|
# ? Jun 5, 2024 03:34 |
|
Is anyone using omgwtf with nzb hydra? It works fine when I add it but it always gets deactivated rather quickly and I'm not sure why.
|
# ? Feb 22, 2020 08:42 |