|
Digital_Jesus posted:Back from the shop all cleaned up and protected. Time to make vroom vroom noises.
|
# ? Jun 21, 2020 21:57 |
|
|
# ? May 11, 2024 12:49 |
|
Cage posted:Your car looks like its cel shaded. Nows your chance to see it in person!
|
# ? Jun 22, 2020 02:18 |
|
Yeah right the longer I wait the better the car gets.
|
# ? Jun 22, 2020 16:29 |
|
6 hours over two days spent rolling around on the floor in my garage in 90 degree heat. Could probably do it again in 2-3 hours if I had to. Passenger side exhaust manifold bolts are kind of a pain and the exhaust flange on the driver side of the new H pipe was either off by a few mm, or the studs were slightly bent - it took some convincing to get that one on. Also had to make two trips to the auto parts store, one for a 16mm 3/4 socket and I forgot what the other time was.
|
# ? Jun 23, 2020 13:03 |
|
SUCH A DICK OF A JOB. I mean ya there are lots of cars more annoying probably but I feel your pain. I needed to buy deep well sockets and a wobble extension for the job. My discovery: I had two flange gaskets installed!! For extra connectivity!! Man thats the one thing I dont miss about that car is all the bad mods done to it. When I bought it there were 12 inch leds in the wheel well to shine on top of the tire. Cage fucked around with this message at 13:14 on Jun 23, 2020 |
# ? Jun 23, 2020 13:11 |
|
Hah. I took that off and wondered how many people leave it on. Used the non-metallic one that came with the new H pipe, hope it lasts.
|
# ? Jun 23, 2020 13:53 |
|
Bought some Dynomax superturbos to swap the flow master 40’s out with. Too loving loud
|
# ? Jun 30, 2020 21:21 |
|
Got an email update from Ford saying the Mustang Mach-e GT I reserved will be available starting late Summer 2021.
|
# ? Jul 2, 2020 20:40 |
|
Aw yiss. https://gfycat.com/sorrowfulfinecrocodile.mp4 What they WERE doing: https://gfycat.com/bittervibrantdrever.mp4 I can feel cool turning right again.
|
# ? Jul 3, 2020 02:43 |
|
All Mustangs should have sequential signals. Especially early SN95s.
|
# ? Jul 3, 2020 03:14 |
|
bird with big dick posted:Got an email update from Ford saying the Mustang Mach-e GT I reserved will be available starting late Summer 2021. I didn't know this was even a thing until I read your post, but that has got to be one hell of a car
|
# ? Jul 3, 2020 03:17 |
|
IOwnCalculus posted:All Mustangs should have sequential signals. Hey agreed! It’s crazy the difference a nice set of led tail lights running a sequential kit makes. already bought a set for my impulse purchase picked up yesterday 530 rwhp on blower 660 on bottle. Fully built T45 Fully built steeda 4.6 2v.... yadda yadda so all that’s going out and for sale. Coyote with full cam and intake work swap and 6 speed Amy Pole Her fucked around with this message at 14:24 on Jul 17, 2020 |
# ? Jul 17, 2020 14:20 |
|
Well that should be mildly fun. Congrats! I had to drive though some 6 inch puddles and hydroplaned a lil bit during a storm yesterday but I still have no clue how this happened. I guess if the chin spoiler was solid enough it could direct the water to push the plate out. also also this last week yeah it needs a cleaning ive been to the beach a few times ok Cage fucked around with this message at 14:45 on Jul 17, 2020 |
# ? Jul 17, 2020 14:35 |
|
Well, I decided to tackle my wheel stud issue myself. Im going to try and fix the stud with a thread chaser and if it fails, I will hammer it out and replace. This is gonna suck without a press and/or air hammer. Im just waiting now for a weekend where it doesn't rain and is not 100 degrees outside.
|
# ? Jul 17, 2020 19:59 |
|
Cage posted:Well that should be mildly fun. Congrats! You complain you never get to see my car but you never tell me when you want to meet up
|
# ? Jul 17, 2020 22:44 |
|
For those with experience surrounding Coyotes and swaps... how hard is it to fix the infamous coyote tick? I feel I’d be replacing those parts with a rebuild anyway and there’s a good priced coyote motor with the tick at only 45k miles on it. Begging to be bought ! And no lovely MT82 transmission attached so I don’t need to go through the hassle of reselling that poorly assembled junk, and just hook up the T56
|
# ? Jul 18, 2020 02:42 |
|
kalvick posted:Well, I decided to tackle my wheel stud issue myself. Im going to try and fix the stud with a thread chaser and if it fails, I will hammer it out and replace. Status update.... I took the car out (because I had a free hour) and ran the thread chaser and fixed the wheel stud! thank goodness I did not have to take the stud out. Now I have spare parts on future standby! bad news is there is a GIANT dry rot crack running up the center of my tire. Im gonna have to replace them. I also discovered my muffler hangers are needing to be replaced UGGG!!!
|
# ? Jul 18, 2020 03:48 |
|
Digital_Jesus posted:You complain you never get to see my car but you never tell me when you want to meet up
|
# ? Jul 18, 2020 14:52 |
|
Looks like the backup camera on my '16 just straight up died. Anyone have a recommendation for replacing it?
|
# ? Jul 18, 2020 19:23 |
|
PIZZA.BAT posted:Looks like the backup camera on my '16 just straight up died. Anyone have a recommendation for replacing it? Check the wiring harness for it in the trunk lid first, pretty sure I remember hearing that's a common failure point.
|
# ? Jul 18, 2020 21:40 |
|
My camera would come loose sometimes, just unplug it and plug it back in.
|
# ? Jul 18, 2020 22:04 |
|
Having an SA Mustang meetup would be so cool. Maybe next year? there is Mustang Week, in North Carolina?, LMR's meet in Texas, and AM's 2021 meet in PA. In the mean time someone setup a zoom meet. I went to 2018's American muscle show here is the proof.
|
# ? Jul 19, 2020 00:18 |
|
I'd be down for PA.
|
# ? Jul 19, 2020 01:18 |
|
Digital_Jesus posted:I'd be down for PA. Lets make this happen. now Cage, what about you?
|
# ? Jul 19, 2020 02:11 |
|
I would be in for PA
|
# ? Jul 19, 2020 03:34 |
|
I could probably do a thing. Are we talking the american muscle PA thing or just a random meet.
|
# ? Jul 19, 2020 05:03 |
|
Im good for a rando meet too assuming its somewhere reasonably within distance of the wny area. Erie is closest in PA but I got no idea where anybody else at. I could be convinced to do a haul to Harrisburg maybe. Otherwise Id be down for AM 2021.
|
# ? Jul 19, 2020 15:14 |
|
I'm in SE PA and would be in to doing something.
|
# ? Jul 19, 2020 15:47 |
|
lol so are all the mustang goons in PA? Pittsburgh here I'd be down for a meetup
|
# ? Jul 19, 2020 18:05 |
|
A random meetup in PA probably wont happen for me, since I am like 4 hours away. BUT... If everyone is up for AM 2021 I would be totally down!!!! Is this really gonna be happening?! I have never done an honest to goodness goon squad meetup thing.
|
# ? Jul 19, 2020 19:14 |
|
PIZZA.BAT posted:lol so are all the mustang goons in PA? Pittsburgh here I'd be down for a meetup I'm just north of you in Butler. It looks like all of the active posters in here are somehow all in PA lol.
|
# ? Jul 21, 2020 06:32 |
|
There should be a warning on the welcome signs.
|
# ? Jul 21, 2020 12:10 |
|
And she’s out! https://ibb.co/bHRLGVs https://ibb.co/BZrHKng Ya know 10 years ago this motor would’ve been absolutely insane and I would’ve killed for it. Funny how time changes things
|
# ? Jul 21, 2020 18:13 |
|
Amy Pole Her posted:And she’s out! What are you going to end up doing for an exhuast? I should start piecing things together to swap my 2002 GT, but I think I might just sell it and buy a Mach 1. However, any of the ones I have found in my price range are automatics...I'd probably want to do a T56 swap anyway...is converting an auto car to a manual more trouble than it's worth? I mean there's a pedal, the clutch assembly, probably a transmission mount and maybe a driveshaft....anything in the tune? Reverse lockout and skip shift work-arounds? New center console trim piece? Bob Morales fucked around with this message at 16:09 on Jul 23, 2020 |
# ? Jul 23, 2020 16:07 |
|
It’s a pretty relatively easy swap. My exhaust will be long tubes with x pipe running to SLP loudmouth
|
# ? Jul 26, 2020 07:28 |
|
Got my 4.10 gears done...only ended up costing me $300 Heat cycled them with 3 20-30 minute rides over the first two days...haven't really romped on it yet but it definitely feels stronger in second and I didn't lose all traction in 1st which I was kind of worried about. Going to drop it off again this week to get the Flowmasters swapped out and the subframes welded on. Then maybe it goes for sale?
|
# ? Jul 27, 2020 13:33 |
|
Amy Pole Her posted:It’s a pretty relatively easy swap. Why are you getting rid of the T45 and blown 4.6? Assuming it all still works great. And where you located?
|
# ? Jul 27, 2020 13:33 |
|
Which crate engine should I get for my 01 engine swap? These are both "Coyote swaps" options for getting almost 600Hp NA. Ford Performance Aluminator 5.2 XS. for $18k OR Ford Performance PF350s for $20k Both have cross plane crankshafts and rev really high. for the same price you could get a supercharge Gen 3 coyote, but everyone does that
|
# ? Jul 28, 2020 01:52 |
|
kalvick posted:Which crate engine should I get for my 01 engine swap? ilkhan fucked around with this message at 21:49 on Jul 28, 2020 |
# ? Jul 28, 2020 03:26 |
|
|
# ? May 11, 2024 12:49 |
kalvick posted:Which crate engine should I get for my 01 engine swap? They seem to be about the same, but the Aluminator has a lower compression ratio, presumably for forced induction.
|
|
# ? Jul 28, 2020 13:22 |