|
TobinHatesYou posted:Trace the old cleats with a silver sharpie. Riding in British winter means my cleats have a permanent slightly muddy outline on the soul of the shoe
|
# ? Feb 19, 2021 18:55 |
|
|
# ? Jun 8, 2024 06:33 |
|
Pittsburgh Fentanyl Cloud posted:I have bad knees and I had to gently caress with my pedal tension and cleat positioning for a few weeks until I got it right, I'm not excited about the prospect of ever replacing the pedals or the cleats. Trace around the cleats on the sole before you take them off to replace. Edit: beaten by tobin, didn't even know I was racing As to the being careful while walking around bit - you won't crack them, but you can prematurely wear the cleats or get them full of dirt, which is annoying. If you do it a lot, you might consider getting "kool kovers" to go over the cleat while you're tromping about. bicievino fucked around with this message at 20:13 on Feb 19, 2021 |
# ? Feb 19, 2021 20:09 |
|
Road cleats give you extra grip when hiking up shortcuts.
|
# ? Feb 19, 2021 20:22 |
|
Replacing cleats and pedals is probably one of the easier tasks involving a bike
|
# ? Feb 19, 2021 23:19 |
|
I got to say it was a good day.
|
# ? Feb 20, 2021 01:11 |
|
Eejit posted:Replacing cleats and pedals is probably one of the easier tasks involving a bike Except when you strip the hex bolt hole trying to take off a cleat because you haven’t touched them in a long time and probably didn’t clean out all the dirt properly I need to get a dremmel...
|
# ? Feb 20, 2021 05:18 |
|
e.pilot posted:I got to say it was a good day. oh my
|
# ? Feb 20, 2021 06:26 |
|
Levitate posted:Except when you strip the hex bolt hole trying to take off a cleat because you haven’t touched them in a long time and probably didn’t clean out all the dirt properly maybe borrow one? they're not great if you're going to buy something, get a screw extractor (if you have a drill) https://www.amazon.com/Extractor-Stripped-HassleFree-Hardness-63-65hrc/dp/B07GZ17QD9/ comparison of different extractors, irwin does well for the low price: https://www.youtube.com/watch?v=XVTn6wI4g6s
|
# ? Feb 20, 2021 06:37 |
|
Levitate posted:Except when you strip the hex bolt hole trying to take off a cleat because you haven’t touched them in a long time and probably didn’t clean out all the dirt properly Yeah I have to take my bike in to the LBS to help get one of my pedals unscrewed. But this is just a problem of having the correct tool. There are plenty of wrenching skills that require finesse, which I totally lack
|
# ? Feb 20, 2021 07:28 |
|
Cat rear end Trophy posted:This just pulled up an old memory. At some time, one of those little conical 2mm bolts that holds the face plate on fell off during a ride. I wrote to Trek and they sent me an entire brake small parts kit. Pretty much 2 of every little screw and bit that you would ever need. I think I still have it somewhere and it would be nice to give that bag of parts to someone who might need it at some time. Any chance you found the bolt set? I was able to dial in the rear brake, but one adjuster bolt on each side is stripped, and one is really close.
|
# ? Feb 20, 2021 08:08 |
|
Eejit posted:Replacing cleats and pedals is probably one of the easier tasks involving a bike Loosening pedal spindles is pretty spooky, even when I have the chain in the big ring.
|
# ? Feb 20, 2021 09:26 |
|
TobinHatesYou posted:Loosening pedal spindles is pretty spooky, even when I have the chain in the big ring. I recently faceplanted on the big ring when changing pedals in a bad position. I'm what some would consider a professional bike mechanic and should have known better. Wasn't great though no permanent injuries apart from a small scar.
|
# ? Feb 20, 2021 10:53 |
|
The trick with pedals is to step on the wrench instead of using your hands.
|
# ? Feb 20, 2021 12:05 |
|
e.pilot posted:I got to say it was a good day. Well that makes the highest point near me look like complete poo poo
|
# ? Feb 20, 2021 14:15 |
|
e.pilot posted:I got to say it was a good day.
|
# ? Feb 20, 2021 16:09 |
|
MrL_JaKiri posted:Well that makes the highest point near me look like complete poo poo You’re blocking the entrance
|
# ? Feb 20, 2021 16:11 |
|
Vando posted:The trick with pedals is to step on the wrench instead of using your hands. gently caress, should have used this technique last night. It was indeed harrowing to get some seized flats off a friends bike so they could upgrade to the clip in life. Doesn’t look like there was any bike grease applied so hopefully it’s easier next time
|
# ? Feb 20, 2021 16:41 |
|
e.pilot posted:You’re blocking the entrance I live by my own rules
|
# ? Feb 20, 2021 18:02 |
|
The lure of 10,000 meters after you’ve already done 8,848 is too strong to resist.
|
# ? Feb 21, 2021 02:38 |
|
Literally Lewis Hamilton posted:The lure of 10,000 meters after you’ve already done 8,848 is too strong to resist. holy poo poo
|
# ? Feb 21, 2021 02:56 |
|
Literally Lewis Hamilton posted:The lure of 10,000 meters after you’ve already done 8,848 is too strong to resist. Would not.
|
# ? Feb 21, 2021 03:02 |
|
Is that AdZ? How many pairs of gloves did you get?
|
# ? Feb 21, 2021 06:18 |
|
HAIL eSATA-n posted:Is that AdZ? How many pairs of gloves did you get? Too real.
|
# ? Feb 21, 2021 10:16 |
|
|
# ? Feb 21, 2021 10:37 |
|
Literally Lewis Hamilton posted:The lure of 10,000 meters after you’ve already done 8,848 is too strong to resist. Daaaaaaaaaaamn dude
|
# ? Feb 21, 2021 13:12 |
|
Literally Lewis Hamilton posted:The lure of 10,000 meters after you’ve already done 8,848 is too strong to resist. no
|
# ? Feb 21, 2021 14:16 |
|
HAIL eSATA-n posted:Is that AdZ? How many pairs of gloves did you get? It is. I actually got the wheels the first two times up, which I already had, so you just get XP. I got the helmet like 3 times and gloves the rest.
|
# ? Feb 21, 2021 15:36 |
|
You're making me want to have a go at AdZ again today but I'm far too tired for it.
|
# ? Feb 21, 2021 16:12 |
|
Literally Lewis Hamilton posted:The lure of 10,000 meters after you’ve already done 8,848 is too strong to resist. The Venge isn't a climbing bike
|
# ? Feb 21, 2021 16:19 |
|
it is now
|
# ? Feb 21, 2021 17:05 |
|
I did it on a Trek 1.2 I had to take off the belt cover on the Kickr so the derailleur didn’t rub when it was in the granny gear.
|
# ? Feb 21, 2021 17:56 |
|
kimbo305 posted:Any chance you found the bolt set? I was able to dial in the rear brake, but one adjuster bolt on each side is stripped, and one is really close. Sorry for the delay. No, I did not find the brake parts. I must have included them in the sale when I sold the bike. I did find a bag of plastic parts for mounting all manner of lights, GPS and cameras to the seat tube and handlebar. You are welcome to those if you want them.
|
# ? Feb 22, 2021 03:59 |
|
I bought a brand new bike last summer and it's been in storage for the last several months due to the cold weather. I just went to check up on the bike recently and noticed that my back tire has lost a lot of air since I put it in storage while the front tire is still perfectly inflated. I remember when I first bought the bike I noticed that the rear tire would need to be pumped up at least once a week. Do you suggest I replace the rear tire or continue riding with my current setup with the intention of just keeping up with filling the tires after every ride?
|
# ? Feb 22, 2021 12:08 |
|
Busy Bee posted:I bought a brand new bike last summer and it's been in storage for the last several months due to the cold weather. I just went to check up on the bike recently and noticed that my back tire has lost a lot of air since I put it in storage while the front tire is still perfectly inflated. Pump it up and see how much PSI/Bars it loses in a day. If it's minimal I'd just top it off, if it's more or bothering you, replace the tube. You don't need to replace the tire.
|
# ? Feb 22, 2021 12:13 |
|
Literally Lewis Hamilton posted:Pump it up and see how much PSI/Bars it loses in a day. If it's minimal I'd just top it off, if it's more or bothering you, replace the tube. You don't need to replace the tire. How do we know that it's the tube that needs to be replaced and not the tire? Or both even?
|
# ? Feb 22, 2021 13:11 |
|
Busy Bee posted:How do we know that it's the tube that needs to be replaced and not the tire? Or both even? Tires have wear marks on them, much like car tires. They'll also develop a flat vs. round appearance where more of the rubber tread has been worn away along the middle. Even if you rode over a nail, the tire would likely be fine after you pulled the nail out of course and patched or replaced the tube. Unless it's worn down, dry rotted and cracked, or has a gash in it, the tire should be fine. Especially on a brand new bike that hasn't been ridden. The tube could have a tiny hole or maybe the valve is leaking ever so slightly.
|
# ? Feb 22, 2021 13:41 |
|
PolishPandaBear posted:Tires have wear marks on them, much like car tires. They'll also develop a flat vs. round appearance where more of the rubber tread has been worn away along the middle. Even if you rode over a nail, the tire would likely be fine after you pulled the nail out of course and patched or replaced the tube. Unless it's worn down, dry rotted and cracked, or has a gash in it, the tire should be fine. Especially on a brand new bike that hasn't been ridden. Got it - it is a brand new bike that I've ridden maybe ~400 miles on so I'm assuming that it's not the tire. I guess I'll look into getting the tube + valve replaced for peace of mind.
|
# ? Feb 22, 2021 14:48 |
|
Busy Bee posted:Got it - it is a brand new bike that I've ridden maybe ~400 miles on so I'm assuming that it's not the tire. I guess I'll look into getting the tube + valve replaced for peace of mind. Best to learn how to do it yourself - if you're out on a ride and you get a flat, it's much better to repair it yourself at the roadside rather than needing someone to come and give you a lift.
|
# ? Feb 22, 2021 15:12 |
|
MrL_JaKiri posted:Best to learn how to do it yourself - if you're out on a ride and you get a flat, it's much better to repair it yourself at the roadside rather than needing someone to come and give you a lift. Agreed. A new tube (valve is built into the tube) and a pair of good tire levers should cost less than $15.
|
# ? Feb 22, 2021 15:14 |
|
|
# ? Jun 8, 2024 06:33 |
|
Busy Bee posted:Got it - it is a brand new bike that I've ridden maybe ~400 miles on so I'm assuming that it's not the tire. I guess I'll look into getting the tube + valve replaced for peace of mind. With a tubed clincher tire setup like you have, any slow leak is going to be the fault of the tube. An old tire isn’t the source of a leak, but the likelihood of getting an inner tube puncture increases as the tread wears thin. As you said, the bike is new, it’s not the tire. It’s also entirely possible a different, lighter tube was installed at the factory or shop, which loses air faster than a standard tube. For example, a “light” butyl tube would definitely go flat over a couple months. A latex tube would go flat in several days to a week.
|
# ? Feb 22, 2021 16:57 |