|
https://youtu.be/0EwraSl1aPI I ended up buying whatever my local hardware store had. I use them when grinding or cutting stuff or working above my head of course, but I kind of hate them because even though they're not scratched up at all, they still make stuff more difficult to see somehow.
|
# ? Feb 25, 2021 02:05 |
|
|
# ? Jun 3, 2024 23:06 |
|
I have been using my Bouton Traditionals a lot lately and I’m a fan, but I still prefer the gasketed Uvex goggles or a full face shield are better for lots of grinding/overhead work.
|
# ? Feb 25, 2021 03:03 |
|
3M Virtua CSS or SecureFit with the foam are excellent, and I use them with and without the foam as general safety glasses. The sides are a little bulky under ear muffs on the Virtua. The foam is nice just to help avoid stuff bouncing off your face and working its way into your eyes. For a much more real seal, I love these https://www.amazon.com/gp/product/B006WPSEAK/ I do a lot of sawmilling and bandmills blow awful clouds of heavy wet dust everywhere. These are the only things that have worked for me so far. Somewhat delicate but goddamn they work well. Also it's absolutely worth buying a 100 pack of some kind of anti-fog cleaner wipes. If you can avoid dropping safety glasses, having wipes around to clean them instead of your shirt or something makes them last forever. Anti fog actually mostly works if you use it regularly too.
|
# ? Feb 25, 2021 03:20 |
|
e: oops wrong thread for a project update, I just wanted to poo poo on this tool in particular: I bought an ABN stud extractor set on the recommendation of the Project Farm guy, and it effortlessly turned my threaded stud into a beautifully polished, unthreaded stud. Guess I'll go buy a torch. ryanrs fucked around with this message at 04:19 on Feb 25, 2021 |
# ? Feb 25, 2021 04:08 |
|
Elviscat posted:I really wish safety glasses above like $15 came with a darn case. The prescription ones from rxsafety do! I just never use them and scratch the gently caress out of them anyways.
|
# ? Feb 25, 2021 04:22 |
|
As safety coordinator for my 4 person office, I bought like 20 pairs of different kinds of safety glasses and littered them all over our one room office. No cases, no organization, just safety glasses all over the loving place. No excuses that you couldn't find one.
|
# ? Feb 25, 2021 06:33 |
|
Bouton's forever! https://www.amazon.com/Bouton-249-5...396&s=hi&sr=1-1 I had a professor in college that swore by these, I bought some, loved them, then they got lost or someone walked off with them within the year - forgot about them - watched the project farm safety glasses video about a year ago and was taken back very quick - ordered all 3 types, clear, sunglasses and the IR version for using the laser cutter/plasma - I love them, wear the clear ones almost daily - my wife actually appropriated the sunglasses and wears them as her daily shades, once I figured out she took them, i took the side guards off for her and they actually look pretty stylish on her.
|
# ? Feb 25, 2021 07:16 |
|
I'm pretty sure Project Farm has done a safety glass test. If not, he'll likely do one if suggested!
|
# ? Feb 25, 2021 08:00 |
|
He did, but they are out of stock.
|
# ? Feb 25, 2021 09:39 |
|
I bought a pile of Bearcat, Uvex, or AOSafety safety ones years ago from Zoro, and scattered them around. I've got face shields too, specifically the Bionic. I've got a couple of expensive pairs, they're not much better. Maybe a bit better anti fog. They all scratch the same when dropped or sprayed with tile fragments.
|
# ? Feb 25, 2021 13:29 |
|
Before I started wearing prescription I always found uvex to be the most comfortable. I'd recommend a face shield too, great for grinding and sanding drywall joints on the ceiling. I still cant find a pair of prescription safety glasses that are plastic for arc flash and aren't uncomfortable.
|
# ? Feb 25, 2021 15:59 |
|
So I'm an idiot and didn't realize that the makita ratchet that's so popular right now is actually 12v and not the 18v that is the universe I am currently in. Makita has a 18v ratchet and I'm not in to it, so I did the right thing and bought the Mil(fuckey) M12 stubby 3/8 - my OCD is pretty upset about this, but the form factor of the red one is so much better, its cheaper, magazine style battery, compact - WHATEVER! then i saw more M12 stuff... I'm hosed.
|
# ? Feb 25, 2021 23:10 |
|
You picked up the Stubby impact and not the ratchet? Interesting turn. You know what happens next right?
|
# ? Feb 25, 2021 23:19 |
|
StormDrain posted:You picked up the Stubby impact and not the ratchet? Interesting turn. You know what happens next right? You buy the ratchet, then the long neck ratchet. In Milwaukee chat, I'm pissed -- my M18 7 1/4" circular saw is completely fucky. It won't start at all unless you give it some percussive therapy, and even then it starts with a grinding-gear sound, if not a full-on stutter. The thing has seen maybe 5 hours of use in a year and a half. I know it's under warranty, but come on, that's bullshit.
|
# ? Feb 26, 2021 01:11 |
|
That does suck. I live in a city ~100K people and we have our own local warranty depot. Hopefully you can just drop it off at a guy so you're not without it for long? If it's really fucky he might be able to just authorize a new one or a reman unit.
|
# ? Feb 26, 2021 01:28 |
|
meatpimp posted:You buy the ratchet, then the long neck ratchet. You have to wait until the new ratchet comes out in like a month!
|
# ? Feb 26, 2021 01:33 |
|
LobsterboyX posted:So I'm an idiot and didn't realize that the makita ratchet that's so popular right now is actually 12v and not the 18v that is the universe I am currently in. Makita has a 18v ratchet and I'm not in to it, so I did the right thing and bought the Mil(fuckey) M12 stubby 3/8 - my OCD is pretty upset about this, but the form factor of the red one is so much better, its cheaper, magazine style battery, compact - WHATEVER! then i saw more M12 stuff... I'm hosed. I'm fully DeWalt ecosystem but the Milwaukee M12 stuff fills a different niche. My 3/8 ratchet gets constant use.
|
# ? Feb 26, 2021 01:37 |
|
What the poo poo is an arbor press typically used for? Don't have, need or want one but I was just reminded of their existence and never really knew what the gently caress they were for. Also remember that show that Stacey David was on, either Trucks! or........ the other one after that, they would give away a Dake arbor press to whoever had their ride, or question or whatever the gently caress featured/answered on the show
|
# ? Feb 26, 2021 01:54 |
|
pressing things into or against other things, with less force than a hydraulic press is capable of
|
# ? Feb 26, 2021 01:58 |
|
Gives you huge mechanical advantage on pressing things together, but still gives you the ability to have tactile feedback.
|
# ? Feb 26, 2021 02:07 |
|
Quicker than a hydraulic press though. They've fallen out of favor with hydraulic presses being more versatile. Useful if you're press fitting bearings all day or something.
|
# ? Feb 26, 2021 02:07 |
|
meatpimp posted:You buy the ratchet, then the long neck ratchet. Honestly, I disagree, I haven’t touched my short ratchets since I bought long necks. The extra length is almost never an issue, but the extra clearance from the body being further away lets me get it into more places. If I was replacing my tools, I’d go longneck first IMO.
|
# ? Feb 26, 2021 02:45 |
|
Frank Dillinger posted:Honestly, I disagree, I haven’t touched my short ratchets since I bought long necks. The extra length is almost never an issue, but the extra clearance from the body being further away lets me get it into more places. If I was replacing my tools, I’d go longneck first IMO. another tool i'm hunting for. a 36"+ long neck ratchet on 1/2 drive that's actually decent.
|
# ? Feb 26, 2021 03:02 |
|
um excuse me posted:Gives you huge mechanical advantage on pressing things together, but still gives you the ability to have tactile feedback. Elviscat posted:Quicker than a hydraulic press though. They've fallen out of favor with hydraulic presses being more versatile. those too. they're also lower-maintainance than a hydraulic press, being basically a rack and pinion on its side
|
# ? Feb 26, 2021 03:03 |
|
Dacheat posted:another tool i'm hunting for. Hmmm, if one exists it would probably be Koken.
|
# ? Feb 26, 2021 03:37 |
|
Just bought a Sparc dual output regulator for my Argon tank. So that I can purge and run my tig welder at the same time. This is so much better then having to get a second tank and regulator for purging.
|
# ? Feb 26, 2021 03:39 |
|
meatpimp posted:You buy the ratchet, then the long neck ratchet. Sounds like bad brushes or commutator. Definitely warranty it but if this happens to older tools it's like 6 bucks on ereplacementparts and 15 minutes to fix it as long as you stop using it when the issues start, otherwise you turbofuck the commutator with all the arcing and it'll never be right.
|
# ? Feb 26, 2021 03:41 |
|
Valt posted:Just bought a Sparc dual output regulator for my Argon tank. So that I can purge and run my tig welder at the same time. This is so much better then having to get a second tank and regulator for purging. I bought the flame tech from Jody@Welding Tips and Tricks. Had to buy a larger bottle. lol
|
# ? Feb 26, 2021 06:07 |
|
StormDrain posted:You picked up the Stubby impact and not the ratchet? Interesting turn. You know what happens next right? No, I got the stubby ratchet https://www.amazon.com/gp/product/B07HSX1TTK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - I really didn't want to change brands, I really love my makita stuff, but the fact that their comparable also takes a different battery and charger as well kinda made up my mind to just buy the one I want - this is the comparable: https://www.amazon.com/Makita-RW01R...951&s=hi&sr=1-1 round tool, square, backwards battery - it just looks kinda hokey - Once again Project Farm kinda made up my mind for me I see myself packing this thing when going racing or just on a longer trip with an old car -
|
# ? Feb 26, 2021 06:16 |
|
Elviscat posted:Quicker than a hydraulic press though. They've fallen out of favor with hydraulic presses being more versatile. This, but also because they're hand powered there's significantly less safety equipment required to have them on the manufacturing lines I'm familiar with. The (important) safety overhead for a hydraulic tool makes an arbor press a much quicker thing to get moving.
|
# ? Feb 26, 2021 06:22 |
|
kastein posted:Sounds like bad brushes or commutator. Definitely warranty it but if this happens to older tools it's like 6 bucks on ereplacementparts and 15 minutes to fix it as long as you stop using it when the issues start, otherwise you turbofuck the commutator with all the arcing and it'll never be right. Brushless.
|
# ? Feb 26, 2021 12:31 |
|
meatpimp posted:Brushless.
|
# ? Feb 26, 2021 15:15 |
|
I took the blade off and blew everything out today. No change. Sounds like / seems like there's a physical gear problem inside. Sometimes it grinds on startup, sometimes it's perfectly fine, sometimes it chugs. I'm thinking the chugging is when it hits the bad gear spot on startup... who knows.
|
# ? Feb 26, 2021 15:42 |
|
I've been thinking about off season wheel and tire storage. I have two vehicles with second sets of wheels and tires. The GMC has 275/55 r20s, which are a bit heavy to lift high. The Escape has like 230s on 16s, which aren't so bad. I also keep them in the backyard since my garage is full. I'm working on a shed and I'd like to have a well planned solution for storage inside. My initial thought was a pair of plywood platforms like pallets I can take a full stack of tires with my dolly back and forth. That helps extend the bottom plate of the dolly so I can actually use it. Very simple, but it might be too heavy to move all four across rough terrain. The pathway is lumpy grass turf. I currently use my wheelbarrow and do two at a time since they're too big for the wheelbarrow. I think the two columns of tires is acceptable, and they'll snug into the low side of my shed. It's tough to find much already made that I can't do cheaper and specific to my application. Its like four trips a year so I'm not too particular.
|
# ? Feb 26, 2021 18:54 |
|
Has anyone tried any of these diy sandblaster kits? I have several 500gal oil tanks available to turn into a blasting cabinet or anything else I could use them for. As far as I can tell I'd only be out the cost of the kit and my time plus it would be huge compared to one of those HF cabinets.
|
# ? Feb 26, 2021 19:24 |
|
meatpimp posted:I took the blade off and blew everything out today. No change. Sounds like / seems like there's a physical gear problem inside. Sometimes it grinds on startup, sometimes it's perfectly fine, sometimes it chugs. I'm thinking the chugging is when it hits the bad gear spot on startup... who knows. dang, well at least you can warranty it. i have the same saw and absolutely love it (but i dont use it that often). it's much better than the silly m12 5.25 that i had prior.
|
# ? Feb 26, 2021 19:33 |
|
Milwaukee's warranty process is seriously easy to deal with. Hardest part will be finding a box to ship it back in.
|
# ? Feb 26, 2021 20:05 |
|
SpeedFreek posted:Has anyone tried any of these diy sandblaster kits? Best way to get a sandblasting cabinet, is to take on a job that will pay for it. They do take up a bunch of shop space and all the small details can chew up a lot of time. gloves, media trap, light fixture, door/hinge seals. The vacuum filtration is totally worth it and a big component to maintain. And a compressor, and on and on. Making your own, high pressure washing cabinet, that would be cool. Pressure washer hose sprayer jets are cheap. Rotating table, tankless/or old water heater and a pump, set a timer and automate. edit: Something like this ancient thread https://www.pirate4x4.com/threads/heating-my-home-made-dish-i-mean-parts-washer.1030309/page-3 Making something bigger than used dishwashers. Slick fucked around with this message at 22:03 on Feb 26, 2021 |
# ? Feb 26, 2021 20:09 |
|
Are normal screwdriver bits some sort of standard imperial socket size? I want to use the hex bit in my ratchet because allen wrenches are a gently caress, but the metric sockets don't fit - one's too small, the next size is too large.
|
# ? Feb 27, 2021 16:15 |
|
|
# ? Jun 3, 2024 23:06 |
|
mobby_6kl posted:Are normal screwdriver bits some sort of standard imperial socket size? I want to use the hex bit in my ratchet because allen wrenches are a gently caress, but the metric sockets don't fit - one's too small, the next size is too large. Try a 1/4" socket
|
# ? Feb 27, 2021 16:17 |