|
Plumbers that are working on redoing my waste plumbing managed to knock off and shatter a light fixture globe and also put a hole in a wall they had access to the back of. Kind of pissed since I'm paying "gently caress you" prices. They ran out of pipe and are calling it a day and I'm without any toilets, sinks, or showers until sometime tomorrow. Not to mention a giant hole under my house and where pipes should be. So I'm going to shore that up before any cats, rodents, or pests find their way into my home tonight. SpartanIvy fucked around with this message at 23:25 on Apr 26, 2021 |
# ? Apr 26, 2021 23:13 |
|
|
# ? May 27, 2024 02:57 |
|
Motronic posted:Because wood is too expensive to buy I decided to buy a bunch of lights and mud and paint to redo a room instead of building the new barn. I'm in the final stretch after about a month. 2 hours of taping (90 yards of tape) and 2.5 hours of cutting in today. At least painting the field should be easy. Wet bar? That's a great location for it, I'm jealous
|
# ? Apr 26, 2021 23:51 |
|
tater_salad posted:Someone unplugged the telescope? Gunna need a real long hanger or something to reach the cord now I'm sure.
|
# ? Apr 27, 2021 00:26 |
|
My plumbers left for the day and pretty much just packed their tools up and left, leaving me with a huge gaping hole leading directly under my house for any cat, rodent, bug, or adventurous hobo to enter. So I covered it up as best I can before the sun goes down. I pretty much jammed a series of planks, cardboard boxes, and towels around it. I also put bags over both the cleanouts and the exposed pipe inside so that a torrent of cockroaches doesn't invade my home from the main sewer line. Here you can see where they excavated like 2-3 feet of dirt and piled it up onto and a little over the floor joists, which is probably not great for them, but maybe just for a day isn't a big deal. I'm super concerned about them undermining my foundation though. My soil is very sandy and doesn't seem like it's that great for holding up a huge load without a lot of horizontal support. The saving grace is that there are large and at pretty deep concrete piers that are directly under the main joists and go deeper than they dug. I think those are probably doing the majority of the lifting at this point. I'm debating crawling under there with a piece of 4x4 and a bottle jack and supporting it a little more. How big of a discount off of an $8,000 bill should I demand for them leaving me overnight without any water or sewer without warning? SpartanIvy fucked around with this message at 00:38 on Apr 27, 2021 |
# ? Apr 27, 2021 00:35 |
|
*selects pick-up* *Lee Carvallo putting challenge voice* you have selected, home delivery
|
# ? Apr 27, 2021 00:57 |
|
Enos Cabell posted:Wet bar? That's a great location for it, I'm jealous Thanks and yeah, wet bar opening to the patio via two sliders. This place is set up for entertaining and we're getting ready to do that again when everybody's got jabs in arms.
|
# ? Apr 27, 2021 01:20 |
|
Motronic posted:Thanks and yeah, wet bar opening to the patio via two sliders. This place is set up for entertaining and we're getting ready to do that again when everybody's got jabs in arms. What lights are those in the ceiling? I need to install a few and the only thing holding me back is not wanting to get something garbage. EDIT: That, and figuring out how to deal with the strapping and joists behind the holes I wanted to reuse. mcgreenvegtables fucked around with this message at 02:05 on Apr 27, 2021 |
# ? Apr 27, 2021 02:00 |
|
mcgreenvegtables posted:What lights are those in the ceiling? I need to install a few and the only thing holding me back is not wanting to get something garbage. pancake box
|
# ? Apr 27, 2021 02:07 |
|
yeah, that's what was in there holding up the weird pendant lights I took down. Was hoping to somehow get led "cans" in here without too much work. Worst case I patch in these holes and relocate a bit.
|
# ? Apr 27, 2021 02:12 |
|
mcgreenvegtables posted:What lights are those in the ceiling? I need to install a few and the only thing holding me back is not wanting to get something garbage. I replaced 2 6" cans and two useless pendants over the bar with 10 Lotus LRG2s. 2" recessed gimbal LEDs. They got a bunch of sizes if you want to reuse the holes you've got. I can't tell how much depth you have to that joist, so a recesses or recessed gimbal may not work, but they have some that are as thin as 1/2" IIRC....literally trough them into drywall directly under a joist. I used this because I had overhead space: https://www.lotusledlights.com/recessed-lighting/gimbal/2-inch-regressed-gimbal-led-recessed-lighting You may be looking for something more like this: https://www.lotusledlights.com/recessed-lighting/4-inch/11w-economy-recessed-led-lighting-fixture-round-super-thin I had no interest in reusing the old poo poo in here so there was a lot of patching going on:
|
# ? Apr 27, 2021 02:12 |
|
Thanks, that stuff looks good. How stupid would I be to cut out the strapping behind these holes? That would let me get the driver box in the ceiling. There are actually joists on the edge of each hole, so the strapping would be well supported on the outside of each hole, and between them I imagine nailed to another joist and screwed into the drywall hopefully in a few places.
|
# ? Apr 27, 2021 02:24 |
|
mcgreenvegtables posted:Thanks, that stuff looks good. If this is "regular" joist strapping where they're perpendicular to the joists and what you attach the drywall to it's probably fine to cut through, but don't take my word for that because I can't really tell what you have going on. I don't see joist strapping much around here unless it's over engineered trusses that have too great of a span between each to keep drywall from sagging. (I'm also not a big engineered truss fan so I'm not up on the latest there either).
|
# ? Apr 27, 2021 02:37 |
|
SpartanIvy posted:How big of a discount off of an $8,000 bill should I demand for them leaving me overnight without any water or sewer without warning? You will likely get a $0 discount and a smug "We never promised in writing it would be done in a day." But I would demand perfection from them. If anything looks at all off do not pay the whole bill until it's done, inspected, etc. 25% holdback on punchlist isn't crazy town.
|
# ? Apr 27, 2021 15:17 |
|
man these expenses are really adding up retiling the bathroom - it's a very small bathroom, only needs 48 SF of tile, first person said he would charge by the hour (lol), and then estimated 2400 for labor second person quoted me 1300 flat for all the labor, so yeah I'll go with that one but then I'm like, okay might as well replace the 15 year old two piece toilet with a one piece from Toto hmmm.. I guess those Eames chairs will have to wait
|
# ? Apr 27, 2021 17:21 |
|
update since I think a couple people asked, I had a painter come by and use the tool that you put up to the surface to find the closest match. It worked really well! The top candidate is virtually indistinguishable - you would only really notice if you were really looking at and and had pretty bright light on it. Some of that might just be that it's satin, and while the original wall paint was satin, the painter thought it had faded to more of a flat appearance. The home depot doesn't have flat finishes for their $5 sample jars though.
|
# ? Apr 27, 2021 21:39 |
|
What's a good thermostat? I don't want it to connect to the internet, but it'd be nice if it was "smart" in the aspect of letting me program things more complicated than daytime/nighttime temps. Also, if I have a thermostat already and am comfortable with low voltage and 110 wiring, how hard is it to install myself? e: honestly, WiFi would be fine, maybe nice, as long as I could silo it off from the network and not have it connect to the internet proper.
|
# ? Apr 27, 2021 21:43 |
|
Honeywell T87. More serious answer: I think want you want is a plain old programmable thermostat, rather than a "smart" thermostat. My parents have had the same one (a Honeywell one, I think) since the mid-90's and it still works and suits their needs. I would imagine that computing power and interfaces have improved since then. Hard part would be avoiding the internet-connected garbage.
|
# ? Apr 27, 2021 22:03 |
|
more falafel please posted:What's a good thermostat? I don't want it to connect to the internet, but it'd be nice if it was "smart" in the aspect of letting me program things more complicated than daytime/nighttime temps. Also, if I have a thermostat already and am comfortable with low voltage and 110 wiring, how hard is it to install myself? As already said, you might just want a programable t-stat. They'll let you have different setpoints through each day of the week, which is about all you need if you aren't trying to squeeze savings or do stuff remotely. Installing a thermostat when you don't make other changes is usually paint-by-numbers easy.
|
# ? Apr 27, 2021 22:09 |
|
I don't think I've ever seen a wifi thermostat that doesn't also depend on the cloud in some way. I have a Honeywell Lyric at my old house and without an internet connection, it can't even follow a loving schedule. Also, the Honeywell Lyric app is poo poo and horrible to use and has randomly just broken for no reason for months at a time.
|
# ? Apr 27, 2021 22:42 |
|
The ecobee stuff uses but it can be accessed over local intranet so if the internet goes down it still follows a schedule and can even be controlled remotely on the same network.
|
# ? Apr 27, 2021 22:50 |
|
FCKGW posted:The ecobee stuff uses but it can be accessed over local intranet so if the internet goes down it still follows a schedule and can even be controlled remotely on the same network. I have/like early ecobees before they integrated Alexa. They can work blocked from the cloud/internet as well.
|
# ? Apr 27, 2021 23:26 |
|
Now I'm angry that that beautiful retro round thermostat never came out, whomever mentioned it a few months ago in here. Wish I had never been aware of it now!
|
# ? Apr 27, 2021 23:32 |
|
toplitzin posted:I have/like early ecobees before they integrated Alexa. You can turn off the Alexa at least. That's what I did. Love my ecobee with sensors because I can have it heat/cool based on the sensor temp and not the thermostat itself. So office during the day, bedroom at night, and living room with the dog if I'm gone.
|
# ? Apr 27, 2021 23:33 |
|
Queen Victorian posted:Honeywell T87. You know poo poo is serious when a product has its own Wikipedia article.
|
# ? Apr 27, 2021 23:34 |
|
FISHMANPET posted:You know poo poo is serious when a product has its own Wikipedia article. It’s in the Smithsonian Institute!
|
# ? Apr 27, 2021 23:41 |
|
actionjackson posted:update since I think a couple people asked, I had a painter come by and use the tool that you put up to the surface to find the closest match. It worked really well! The top candidate is virtually indistinguishable - you would only really notice if you were really looking at and and had pretty bright light on it. Some of that might just be that it's satin, and while the original wall paint was satin, the painter thought it had faded to more of a flat appearance. The home depot doesn't have flat finishes for their $5 sample jars though. hmm unfortunate update, it wasn't as good of a match for a few other spots, plus I suck at painting so my brushstrokes are bad. the painter that came buy said he could just paint both sides of the door for $80 so gently caress it
|
# ? Apr 27, 2021 23:43 |
|
The secret to door painting without spraying it is using a roller for as much as possible.
|
# ? Apr 28, 2021 00:53 |
|
nm posted:The secret to door painting without spraying it is using a roller for as much as possible. yep, I assume that's no issue except for the little 1" recessed area that borders the panels I hired a painter for my bathroom, he was relatively cheap and it showed. For example he didn't have, or use any mini rollers, so even the 8" tall area between the light fixture and the mirror doesn't have stippling. Having another painter fix that! I have no idea what a reasonable cost for a small bathroom is - on one hand it's small, on the other hand it can be quite annoying getting behind fixtures, above the shower/tub, etc. actionjackson fucked around with this message at 01:19 on Apr 28, 2021 |
# ? Apr 28, 2021 01:16 |
|
nm posted:The secret to Rollers are king.
|
# ? Apr 28, 2021 01:41 |
|
FISHMANPET posted:You know poo poo is serious when a product has its own Wikipedia article. Indeed. Products like the T87 are what we study in design school, along with the designers behind them (Henry Dreyfuss in the case of the T87). It's a super well-known and influential design (and ubiquitous - last three houses I've lived in all had/have T87s). The Nest is round and handles the way it does because they wholesale copied the T87. Now Honeywell needs to copy their own poo poo and make a smart/programmable thermostat that isn't ugly-rear end trash (aka make a T87 with a screen). Until that happens I'm highly tempted to create remote control programmable thermostat functionality for myself with an Arduino contraption that physically manipulates my T87.
|
# ? Apr 28, 2021 07:21 |
|
Queen Victorian posted:Now Honeywell needs to copy their own poo poo and make a smart/programmable thermostat that isn't ugly-rear end trash (aka make a T87 with a screen). Until that happens I'm highly tempted to create remote control programmable thermostat functionality for myself with an Arduino contraption that physically manipulates my T87. They have this, it's what I have at my old house. Like I said, it sucks.
|
# ? Apr 28, 2021 07:31 |
|
I like my Honeywell Lyric T5. Easy to program and control on the unit or app and hasn't given me any problems in almost 3 years.
|
# ? Apr 28, 2021 12:25 |
|
why do all these things need an internet connection again, I've seen "smart" thermostats fridges dishwashers (wtf) blenders washers pretty much anything that can be considered a home appliance
|
# ? Apr 28, 2021 14:43 |
|
Wifi thermostats are useful for adjusting and monitoring while out of the house. The “smart” stuff (trying to guess my family schedule based on patterns and phones, etc) is annoying and I just turn it off. Our condensers used to be right next to our patio so it was convenient to be able to shut them off when we had company and were all outside. I understand doing anything other than a set schedule has an effect on longevity of the components and also you don’t need internet connectivity for this, just wifi. We relocated the condensers as part of a renovation so this won’t be as much of an issue, but it was nice.
|
# ? Apr 28, 2021 14:59 |
|
actionjackson posted:why do all these things need an internet connection again, I've seen "smart" dont forget your alexa microwave. I liked my T9 smart thermostat but now I really don't. It has geofencing which is nice.. well it would be if I haven't been working from home for a year It has "adaptive" heating so it knows how long to heat from 58 to 64 or whatever and will start early so it hits that temp at the desired time It has a great feature where you can set one sensor for it even at specific times/dates. to use (not average like ecobee): I figured cool bedroom at night, upstairs during nights I have my kids. Except Geofencing doesn't work all the time, it breaks at times and thinks people are away and then hosue gets cold/hot. Adaptive heating sucks if you use different sensors because it cranks up the heat in the desired sensor room.. My bedroom is coldest room in house with bad insulation windows and furthest from furnace.. to get it to 68 degrees for daytime the rest of the house will be 72. With the adaptive heat going even though I've selected "main thermostat hits 68 at 630am" when adaptive heat is on it'll read it as "bedroom sensor hits 68 by 630am" . I'm about ready to go back to the programable one. We'll see what happens as I transition back to the office but at this point it's just a programable thermostat.
|
# ? Apr 28, 2021 15:07 |
|
We've used a Nest thermostat in our apartments for the last 6+ years. Both the wifi and internet control are nice, especially when we're traveling. I like being able to program it on my phone because you can just go to whatever time you want to adjust instead of cycling through the whole program. We have an older one, I think a gen 2, and I don't think it has geofencing, or if it does it always worked very poorly so I never used it. It did a pretty good job of learning but there's only two of us and we had pretty predictable schedules. If you're at home all the time because of a pandemic those utilities become a lot less useful. We moved into our house last October and haven't swapped out the programmable Honeywell brick because I've been too busy/laid up to run a common wire for the Nest. I've only had to mess with it 4 or 5 times since we've lived here, which is pretty good.
|
# ? Apr 28, 2021 15:22 |
|
The only smart stuff we have are lightbulbs and some outlets for setting timers for growlights and outdoor lighting and our sprinkler controller because we needed a new one anyway and it will read the weather and automatically skip waterings and such. Even then, I don't like having that many "smart" things because companies don't give a poo poo about making anything secure but they're more than happy to sell my data.
|
# ? Apr 28, 2021 15:47 |
|
I like my ecobee because I can adjust the temperature at night without getting out of bed. All the smart predictive stuff is just annoying, I turned it off.
|
# ? Apr 28, 2021 15:51 |
|
Got this: https://smile.amazon.com/Honeywell-TH6110D1005-FocusPRO-Programmable-Thermostat/dp/B000UQ2GCY/ You can program it but I've been too lazy to do so. Turn it down when I got to bed, turn it up when I wake up. No wifi, no bluetooth. Works good, would recommend.
|
# ? Apr 28, 2021 15:58 |
|
|
# ? May 27, 2024 02:57 |
|
Toebone posted:I like my ecobee because I can adjust the temperature at night without getting out of bed. All the smart predictive stuff is just annoying, I turned it off. My ecobee got me a $100 credit for enabling "utility remote control" aka "turning it up when its hot." Jokes on them, it's not on the internet for them to change it.
|
# ? Apr 28, 2021 16:19 |