|
hbag posted:now hopefully theres an easy way to remap keys when i finally get the board itself the GMMK pro has 2 firmwares. the standard one that works with their software & RGB programming, and a QMK firmware that can be programmed with QMK, but has no RGB support. IMO mapping keys in software at the OS level is a whole lot easier than fiddling with firmware, for any keyboard that's a reasonably standard layout. QMK is cool and amazing for people who are into soldering their own stuff together to make one-handers or modern space cadet stuff. But way overboard for something like switching your modifier keys or correcting any problems between ISO keymap on an ANSI physical layout.
|
# ? Jun 19, 2021 02:51 |
|
|
# ? May 31, 2024 22:36 |
|
QMK RGB support is technically in the QMK develop branch now thanks to a keyboard community member doing all the legwork since Glorious was being coy about the RGB chip. Seemingly in response, Glorious finally got started on it and it's mostly ready to go. But it's been held up for like 10 days because the Glorious devs didn't know how to resolve merge conflicts in GitHub of all things. Looking at the pull request, it's almoooost there.
|
# ? Jun 19, 2021 03:47 |
|
Honey Im Homme posted:Cancelled mine without an issue, just submit a ticket through the website, if you haven't made an account yet make sure you use the same email address you used to pre-order. thanks, I just emailed them. totally forgot I even posted in this thread about that keyboard I keep totally forgetting about, was thinking, "what ever happened with that keyboard?"
|
# ? Jun 19, 2021 06:26 |
|
Constellation I posted:. But it's been held up for like 10 days because the Glorious devs didn't know how to resolve merge conflicts in GitHub of all things. Looking at the pull request, it's almoooost there. holy poo poo
|
# ? Jun 19, 2021 17:11 |
|
Constellation I posted:Seemingly in response, Glorious finally got started on it and it's mostly ready to go. But it's been held up for like 10 days because the Glorious devs didn't know how to resolve merge conflicts in GitHub of all things. Looking at the pull request, it's almoooost there. lmao, what? Can you link to this?
|
# ? Jun 19, 2021 18:29 |
|
dyou think if i email glorious they could switch my order from ansi to iso hmmmm
|
# ? Jun 19, 2021 19:08 |
|
hbag posted:dyou think if i email glorious they could switch my order from ansi to iso Can't hurt to ask, the worst would be they say no.
|
# ? Jun 19, 2021 23:35 |
|
mariooncrack posted:lmao, what? Can you link to this? https://github.com/qmk/qmk_firmware/pull/13173 Looks like it's getting close
|
# ? Jun 20, 2021 00:08 |
|
Rexxed posted:Can't hurt to ask, the worst would be they say no. rip how many keys am i gonna be missing once i remap this from US ANSI to UK ANSI
|
# ? Jun 20, 2021 01:19 |
|
Maybe you could just cancel the order and pre-order the ISO kit? ISO has one more key than ANSI, so you'll always be missing one key. Probably # or \ Llamadeus fucked around with this message at 02:41 on Jun 20, 2021 |
# ? Jun 20, 2021 02:37 |
|
hbag posted:how many keys am i gonna be missing once i remap this from US ANSI to UK ANSI one, the key between your shift and z (or zed as you limeys call it) US & UK keyboards send the exact same signals to the PC when you type a key in the same position. It's the OS that interprets that scancode into a character. So right now with my US keyboard I can switch to UK input in windows, hold shift and press 1234, and get !"£$. Easy peasy. So your two issues are 1. Your keyboard is missing a key that emits scancode D5, the UK \| key. 2. The key that emits scancode 2B, which with UK keyboard selected in the OS produces #~, will have a \| label. And since it's an oversize key you have a problem if you want to swap it. Any keycap set that has the US/ANSI style enter and backslash keys is gonna have the wrong label. You could just stick the smaller #~ keycap on there, but I think it'd look dumb. Both of those are solvable, ex this utility can remap keys in windows, using a feature that's pretty much at the base level of the OS. And a simple autohotkey script could put the characters from your 1 missing key somewhere else. But exactly where to put stuff is something you'd have to figure out.
|
# ? Jun 20, 2021 03:29 |
|
Can't QMK based kb's be firmware remapped? i know qmk is a touchy subject on the gmmk pro though
|
# ? Jun 20, 2021 03:47 |
|
Deviant posted:Can't QMK based kb's be firmware remapped? Yeah but TBQH why gently caress with firmware remaps unless • you're doing something that's awkward to do with software, like a one-hand board • you use the board on multiple PCs • you use an alt layout like Dvorak or whatever where everything is moved around For remapping 1 or 2 keys (caps to ctrl or solving a US/UK conflict), the windows scancode override method is super easy.
|
# ? Jun 20, 2021 04:13 |
|
god why the gently caress did past me pre-order an ANSI board im gonna see if theyll be willing to refund my orders so i can go buy an ISO board
|
# ? Jun 20, 2021 04:32 |
|
hbag posted:
haha Glorious mermaid
|
# ? Jun 20, 2021 10:07 |
|
yeah they do that. my email was answered by the glorious pixie
|
# ? Jun 20, 2021 14:01 |
|
Speaking of UK keycaps - I've been turning it over in my head whether it's possible, reasonable or in any way economical to make the caps that would be missing from a HyperX pudding cap set for my UK board.
|
# ? Jun 20, 2021 16:40 |
|
Kerbtree posted:Speaking of UK keycaps - I've been turning it over in my head whether it's possible, reasonable or in any way economical to make the caps that would be missing from a HyperX pudding cap set for my UK board. KRepublic makes black/white pudding set that has keys for everything on a gmmk pro https://www.amazon.com/Pudding-doub...LIC+pudd&sr=8-4
|
# ? Jun 20, 2021 18:58 |
|
Klyith posted:one, the key between your shift and z (or zed as you limeys call it) right - but i dont see how that fixes 2. unless there's somewhere i can buy an oversized UK ANSI # key.
|
# ? Jun 20, 2021 19:10 |
|
maybe i should just buy some blank keycaps who knows
|
# ? Jun 20, 2021 19:25 |
|
hbag posted:right - but i dont see how that fixes 2. unless there's somewhere i can buy an oversized UK ANSI # key. Personally I'd say it makes the most sense to leave the \| label keycap on that key, and then put the #~ keycap on the key left of 1. Then remap those in windows to produce the symbols as per their label. That's pretty straightforward, and doesn't seem like it'd take a ton of adjustment to get used to. Then I'd use autohotkey or similar to make 2 custom keybinds for the symbols on the key that's now missing, assuming you ever used ¦¬ in the first place. Those seem pretty superfluous.
|
# ? Jun 20, 2021 20:11 |
|
Klyith posted:Personally I'd say it makes the most sense to leave the \| label keycap on that key, and then put the #~ keycap on the key left of 1. Then remap those in windows to produce the symbols as per their label. That's pretty straightforward, and doesn't seem like it'd take a ton of adjustment to get used to. on UK keyboards, the key to the left of 1 is `¬¦ and I do use the ` key a lot. tbh blank keycaps might just be less hassle
|
# ? Jun 20, 2021 20:40 |
|
aha wasdkeyboards do custom keycap sets nice
|
# ? Jun 20, 2021 20:51 |
|
Switch to US ANSI and embrace the compose key.
|
# ? Jun 20, 2021 20:53 |
|
qnqnx posted:Switch to US ANSI and embrace the compose key. Galaxy brain move is to just switch to ortho and never worry about anything else then 1u keys.
|
# ? Jun 20, 2021 22:08 |
|
whoops i dont have the fifty seven dollars for a custom keycap set
|
# ? Jun 20, 2021 22:10 |
|
hbag posted:on UK keyboards, the key to the left of 1 is `¬¦ ah, hmmm. Well the same thing would work by that alone and parceling out # and ~ onto other keys, unless you also use # a ton. hbag posted:aha Note that WASD's custom keycaps are lasered ABS with a coating. They're not super durable, if your frame of comparison is anything PBT. And you need to be careful about which cleaning products you use with them. (I think a lot of bad rap is people using alcohol or cleaning wipes that have alcohol, which destroys the coat.) But even if you take care of them they've got limited lifetime. For $60 I think that's an ok deal, because the only other option is to become one of the people that organizes a group buy for their custom thing. edit: honestly it seems like the best course of action at this point is to just cancel your GMMK order and wait for ISO
|
# ? Jun 20, 2021 22:13 |
|
Klyith posted:ah, hmmm. if i do that ill have wasted 60 bucks on the reservation fee i guess id be fine with blank keycaps, they do kinda look nice too ...it'll be a pain in the rear end when i need to find a key tho lmao
|
# ? Jun 20, 2021 22:21 |
|
Pretty sure they'd refund you the reservation fee as well. When they ask for the 2nd installment when you order is ready, they give you the option to not go ahead with the order and get your reservation fee back. I cancelled mine from them since it was available for much cheaper (without shipping fees and customs) from local vendors.
|
# ? Jun 20, 2021 23:59 |
|
quote:Changed your mind after placing a reservation? No worries, you can cancel your reservation at any time for a full refund! https://www.pcgamingrace.com/blogs/news/gmmk-pro-reservation-info Just cancel and buy the ISO version when available. mariooncrack fucked around with this message at 00:20 on Jun 21, 2021 |
# ? Jun 21, 2021 00:16 |
|
mariooncrack posted:https://www.pcgamingrace.com/blogs/news/gmmk-pro-reservation-info but will that refund the $60 reservation fee too
|
# ? Jun 21, 2021 00:36 |
|
and once again im thwarted by my own social anxiety i literally dont have it in me to tell the delivery guy who 100% does not give the first poo poo that "no thanks take it back please"
|
# ? Jun 21, 2021 00:40 |
|
hbag posted:but will that refund the $60 reservation fee too Yes
|
# ? Jun 21, 2021 00:44 |
|
well i checked on their site and apparently i cant cancel so lol why tf didnt i just let the "complete your order" email expire of course i panic bought it lol gently caress me should i go with blank keycaps? its not that big of a deal idk im making this more of a deal than it is i think
|
# ? Jun 21, 2021 00:47 |
|
hbag posted:well i checked on their site and apparently i cant cancel so lol Just return it if you don't want it; why are you torturing yourself with this?
|
# ? Jun 21, 2021 00:54 |
|
interrodactyl posted:Just return it if you don't want it; why are you torturing yourself with this? i dont know i really dont is it even worth returning it? i mean its ONE key and i can probably use blank keycaps i guess????
|
# ? Jun 21, 2021 00:57 |
|
baby's first keyboard build done, thanks for the advice in Discord - I feel way better about putting together my full board now!
|
# ? Jun 21, 2021 01:07 |
|
Love it! Which switches did you go with? On a similar note, does anyone have recommendations for a macropad kit with rotary encoders? I've done some soldering stuff before, and am pretty comfortable setting up Arduinos etc., but I would prefer a PCB over hand-wiring. Basically I just think it would be fun to try out, and want to have some little aluminum knobs to scroll through pages and whatnot with.
|
# ? Jun 21, 2021 03:39 |
|
foutre posted:Love it! Which switches did you go with? They're Box Jades - which I can't use on the actual board I'm going to build (too noisy - I record everything I do for work) so I thought I'd put them in here. Maybe I'll get some more to put on the numpad side of my next board, which I kind of want to turn into a big macropad anyways.
|
# ? Jun 21, 2021 03:46 |
|
|
# ? May 31, 2024 22:36 |
|
Hey friends! My initial order of GMMK Pro FR4 plates actually sold out, but I have more on the way. You can pre-order them if you'd like one, and they start shipping out July 5th: https://avxworks.com/products/gmmk-pro-fr4-plate I also have a little post on Reddit if you don't mind tossing me an upvote: https://www.reddit.com/r/mechanicalkeyboards/comments/o4v4sx/_/
|
# ? Jun 21, 2021 15:21 |