|
Bloody Hedgehog posted:You can also get CA accelerators, which dramatically speed up drying time. Put CA on one part, and a tiny bit of accelerator on the part to be mated, and then when you touch them together they bond almost instantly. The most common one you'll likely see in hobby shops is Insta-Set, by Bob Smith Industries. It comes in a spritz bottle, though you can get it in an aerosol as well. Zip Kicker is another popular brand.
|
# ? Jun 27, 2021 18:19 |
|
|
# ? Jun 5, 2024 19:43 |
|
Midjack posted:Zip Kicker is another popular brand. I saw an interesting technique involving CA accelerant on YouTube recently. The modeler was finishing a 1/700 scale ship and working on stringing the radio aerials. He put a dab of accelerant on a mast, and a drop of CA glue on the wire he was using. Stretch the wire out to where it's going to be attached, and the CA and the accelerant bonded instantly. I haven't tried it yet, but I intend to. https://www.youtube.com/watch?v=yASYXStDPb8&t=1518s That's a terrific build of what could be considered a boring model.
|
# ? Jun 27, 2021 20:30 |
|
That technique definitely works. However, you have to be pretty speedy about it. Most of the time, I find that the accelerator evaporates almost instantly.
|
# ? Jun 27, 2021 23:37 |
|
got everything mostly edged in with mud. i think the tank sits a little nicer now. gotta adjust the glob on Mr. Volksturm's arm a bit. Also got some water effects going. no bubbles so far! punishedkissinger fucked around with this message at 17:25 on Jun 29, 2021 |
# ? Jun 29, 2021 16:48 |
|
Tank big but also tank done Full album: https://imgur.com/gallery/dzIsieB Great times, including breaking off the front left skirt plate at least three times and slipping weights into the spent brass tray with surgical precision after it turned out that the gun was terribly out of balance. Overall I'm pretty happy with how it turned out.
|
# ? Jul 2, 2021 01:51 |
|
I sent your gallery link to a couple model building friends and the responses were "holy poo poo" and "that's gorgeous."
|
# ? Jul 2, 2021 04:27 |
|
Ensign Expendable posted:Tank big Wow, that's fantastic. May I ask what the story is with the missing sprocket? I learnt a very valuable if extremely infuriating lesson today. Despite being similar water-based acrylics, Hobby Color is somewhat more volatile than Tamiya and will totally eat straight through it if you try to paint HC over T. I think I might just switch over to Tamiya though. Hobby Color has a better range of colors but it's so temperamental with thinning, while I'm pretty sure you could mix Tamiya with swamp water and get a smooth coat.
|
# ? Jul 2, 2021 08:42 |
|
RillAkBea posted:Wow, that's fantastic. May I ask what the story is with the missing sprocket? In real life it's a practice called short tracking. If your final drive is jammed you have to bypass it to tow the tank away since it won't move otherwise. I decided to make it like this since I really liked the detail inside the final drive and didn't want it covered up by the sprocket assembly.
|
# ? Jul 2, 2021 15:53 |
|
punishedkissinger posted:got everything mostly edged in with mud. i think the tank sits a little nicer now. gotta adjust the glob on Mr. Volksturm's arm a bit. Also got some water effects going. no bubbles so far! Nooo, zee third reich vill last ein thousand jare! Haha, T-34 go brrrrrrr...
|
# ? Jul 2, 2021 16:21 |
|
The MassiveKampfWagen looks great, Ensign. The shirt track is a nice touch and a clever way to display some otherwise hidden detail.
|
# ? Jul 2, 2021 18:04 |
|
What does everyone use for bushes?
|
# ? Jul 2, 2021 20:18 |
|
punishedkissinger posted:What does everyone use for bushes? My Tamiya brushes are by far my favorite. I highly recommend.
|
# ? Jul 2, 2021 22:02 |
|
punishedkissinger posted:What does everyone use for bushes? Bushes or brushes?
|
# ? Jul 2, 2021 22:04 |
|
punishedkissinger posted:What does everyone use for bushes? We have some nice camellias out front. Might want to check your local ag extension or gardening club for what works best where you are.
|
# ? Jul 2, 2021 22:08 |
|
My mind read that as brushes. Well I hope that's what you meant and I answered your question 😊
|
# ? Jul 2, 2021 23:25 |
|
It's the rare thread where both brushes and bushes are valid.
|
# ? Jul 3, 2021 00:48 |
|
Schadenboner posted:Nooo, zee third reich vill last ein thousand jare! Nein, NEIN! I'm pretty zure zis is against ze Geneva ConvenGLUB GLUB GLUB GLUB. *sounds of drinking tasty, tasty mud*
|
# ? Jul 3, 2021 01:27 |
|
Ensign Expendable posted:In real life it's a practice called short tracking. If your final drive is jammed you have to bypass it to tow the tank away since it won't move otherwise. Oh cool! I've never heard of it before but that makes sense, yeah!
|
# ? Jul 3, 2021 05:41 |
|
I'm not a model building kind of guy, but I've got a question about where to get the good stuff. My dad's birthday is coming up this month and the man loves building models. Usually WW2 airplanes, tanks, but I've seen him build Gundam models (my brother moved out, Dad found them and put them together), and he always puts a ton of care into them. He loves the MCU movies, too, and I thought I'd get him this for his birthday, but I don't know if that's a good site to buy from or not. I don't know much of anything about this kind of stuff, but I want to get my dad a really good, really solid model for his birthday. Is that a good choice? If not, could someone help me find a good choice?
|
# ? Jul 3, 2021 06:20 |
|
Monsters in Motion is a good site, they've been around for years. Can't go wrong with them. The kit maker does sell direct though, for slightly cheaper, so that might save you a few bucks. Shipping costs might be the decider between the two. https://fantastic-plastic.com/shield-helicarrier---catalog.html Is your dad comfortable with working with resin? This is a resin kit, so by nature it's going to be bit more work to finish than a typical styrene model kit. If he's good with that though, this should build up into a very nice kit.
|
# ? Jul 3, 2021 06:40 |
|
I can't find which modelling thread recommended Testors ELO for stripping plastic models, so I'm crossposting it. That stuff is magic. I sloshed some over a couple of parts I needed to re-paint and in about 10 minutes the paint and primer were basically floating free of the plastic part. The toothbrush wasn't used for scrubbing, but just to wipe the old paint off. Your mileage may, and probably will, vary based on what kind of plastic, primer, and paint you have. Always test a solvent on spare sprue or a sample of the material that you can stand watching melt into a puddle (test everything, especially varnish over clear parts). Mine was a scale model from Hasegawa and seemed like a pretty normal plastic for scale kits intended for PVC glue. The other part was from a Bandai HG gunpla kit. Everything had been primed with Vallejo ivory airbrush primer and painted with Model Air colors. Thanks to whoever recommended it.
|
# ? Jul 4, 2021 21:08 |
|
mllaneza posted:I can't find which modelling thread recommended Testors ELO for stripping plastic models, so I'm crossposting it. That stuff is magic. I sloshed some over a couple of parts I needed to re-paint and in about 10 minutes the paint and primer were basically floating free of the plastic part. The toothbrush wasn't used for scrubbing, but just to wipe the old paint off. Do you know if it works on Tamiya spray lacquers? I have a couple car bodies that I did really bad paint jobs on and I can't find anything good to strip them with.
|
# ? Jul 5, 2021 02:20 |
|
Charliegrs posted:Do you know if it works on Tamiya spray lacquers? I have a couple car bodies that I did really bad paint jobs on and I can't find anything good to strip them with. Isopropyl should work with the tamiya lacquers cause I’ve used it previously to remove quite a few different kits. It takes a little time to eat through clear but once through that it works well
|
# ? Jul 5, 2021 02:39 |
|
e: nvm
Vorenus fucked around with this message at 06:26 on Jul 5, 2021 |
# ? Jul 5, 2021 05:23 |
|
Bloody Hedgehog posted:Monsters in Motion is a good site, they've been around for years. Can't go wrong with them. The kit maker does sell direct though, for slightly cheaper, so that might save you a few bucks. Shipping costs might be the decider between the two. He's not a resin man, as it turns out. I had to do some subtle poking around to find that out. He likes where he just gets to put the stuff together, paint it up, that kind of thing. Thank you for your help!
|
# ? Jul 5, 2021 15:43 |
|
Hello chums, someone told me to post my adventures in model kits in here because folk might like to see. My vision is extremely poor and I'm getting old so I do not make like, high-quality perfection or anything, but I have been enjoying myself, and also I am now 2/3rds superglue by weight. First kit I tried, little general store type thing. First time I ever wired up LEDs! Next one, little takoyaki place. I love how they look lit up, the lights add a lot and the shadows hide a lot of clumsy execution. Then I found a little dollhouse kit for cheap so I tried that. Favourite thing is a tossup between the tiny kiwi fruit and the little slippers. I'm still learning about how best to use glue, like the right amounts to use and such. I find this totally absorbing when I'm in the right mood and I get a good number of hours out of them. Eventually I want to branch out and build my own bits and pieces instead of just using kits but for now this is the right speed.
|
# ? Jul 6, 2021 02:48 |
|
Looks good. If you look in my post history in this thread there's a few where I was looking for or wishing for a model of the car from Chitty Chitty Bang Bang. The local public library got a 3D printer and they printed out a Thingverse version of Chitty for me. Here's the car right out of the printer. It had a few trees / sprues. The underside looks really rough. Here it is painted. Now the part that's relevant to this thread. I have a model kit of a 1911 Buick that's old. I plan on 3D printing a model of the car and mixing in parts from the Buick where appropriate. There's a higher detail Version of Chitty that I've found and I want to separate the pieces on that and treat it as a model and not a solid piece. The wheels on the Buick are a soft rubber and the rims are close to the ones on the movie car.
|
# ? Jul 6, 2021 03:36 |
|
Darth Brooks posted:Looks good. If you're going to go to go that far, you should see if you can get the parts printed on a resin printer instead of an FDM printer. You'll get significantly better detail on the parts. There are people on SAmart and the 3d printing thread that can help you.
|
# ? Jul 6, 2021 04:04 |
|
HopperUK posted:Hello chums, someone told me to post my adventures in model kits in here because folk might like to see. These are great! I love these kids though I've never built one myself. I particularly like the night scene it reminds me a lot of summer nights here in the before times.
|
# ? Jul 6, 2021 06:53 |
|
Bucnasti posted:If you're going to go to go that far, you should see if you can get the parts printed on a resin printer instead of an FDM printer. You'll get significantly better detail on the parts. The FDM is what I have available. At the moment I'm relying on the machine at the public library although I know someone interested in 3D printing who might buy a machine. How does the cost compare?
|
# ? Jul 6, 2021 07:06 |
|
Charliegrs posted:Do you know if it works on Tamiya spray lacquers? I have a couple car bodies that I did really bad paint jobs on and I can't find anything good to strip them with. I had acrylic on top of airbrush primer. The ELO broke the bond between the primer and the plastic s the paint and primer lifted off as one sheet. If you primed, you're golden. If you didn't prime, a spray lacquer will probably come off just fine. But try a small sample piece first, ideally leftover sprue.
|
# ? Jul 6, 2021 08:30 |
|
RillAkBea posted:These are great! I love these kids though I've never built one myself. I particularly like the night scene it reminds me a lot of summer nights here in the before times. Thanks! Yeah something about the light spilling onto the pavement is really evocative. I want to do more little shops and have a whole row.
|
# ? Jul 6, 2021 11:11 |
|
HopperUK posted:Hello chums, someone told me to post my adventures in model kits in here because folk might like to see. These are fantastic! Are they scratch built, or from a kit?
|
# ? Jul 6, 2021 20:02 |
|
I'm working on my first model plane kit. I'm much more used to the easy mode gundam and games workshop kits but I'm hoping to airbrush this one and do some weathering with oils. Do people try to do partial assemblies on the cockpit and seats to maybe try to apply decals, or is it best to just assemble everything with the decals left off since I am planning to airbrush it anyway? The F/A-18 instructions in question:
|
# ? Jul 7, 2021 04:17 |
|
most people assemble the cockpit more or less entirely, fully paint and decal it, then close it up.in the body of the plane and mask.it off.
|
# ? Jul 7, 2021 04:19 |
|
Work in sub assemblies if you can. If you were to assemble everything in that cockpit at once you’d have trouble decaling and weathering. It’s easier to work on the tub, seat, and instrument panel separately before assembling them.
|
# ? Jul 7, 2021 04:28 |
|
Symetrique posted:Work in sub assemblies if you can. If you were to assemble everything in that cockpit at once you’d have trouble decaling and weathering. It’s easier to work on the tub, seat, and instrument panel separately before assembling them. Yup, this is exactly how I do it. If you are going the paint before glue route, you're going to want to use CA glue (superglue) to glue the parts together as regular model cement doesn't work on painted parts. I like the Bob Smith gel glue in the pink bottle for stuff like this.
|
# ? Jul 7, 2021 14:23 |
|
SkunkDuster posted:Yup, this is exactly how I do it. If you are going the paint before glue route, you're going to want to use CA glue (superglue) to glue the parts together as regular model cement doesn't work on painted parts. I like the Bob Smith gel glue in the pink bottle for stuff like this. It's not necessary to use CA glue in this situation, a glue like Tamiya extra-thin will dissolve many paints, but either way, the usual idea is to carefully scrape the paint away from the mating surfaces and then apply the cement.
|
# ? Jul 7, 2021 19:44 |
|
Back again to ask about modeling stuff for my dad. A few weeks back, he went to the Air Force museum near Dayton, Ohio. He was all jazzed about seeing the Memphis Belle, and I was browsing Monsters in Motion, and found this. It looks like a pretty good kit to me, but I still know next to nothing about this kind of thing. Is that a good kit? Like, if you built a lot if military plane models, would you be happy to get that?
|
# ? Jul 7, 2021 19:48 |
|
|
# ? Jun 5, 2024 19:43 |
|
SkunkDuster posted:These are fantastic! Are they scratch built, or from a kit? Thank you! From a kit! They're these little Chinese-made kits that I think are for the Japanese market. I get em from Amazon (I know, evil) - if you search 'cutebee' or 'diy house miniature kit' you'll find em. The pricing is really variable but once in a while they'll drop down below 15 quid and then I snap them up. I'm starting to eye up making them from scratch now that I'm seeing how things fit together etc but I've never done anything like that, so I'm still only pondering.
|
# ? Jul 7, 2021 19:57 |