|
No one likes discovering that they really needed to change something but the time to do it was like two whole turns ago. .
|
# ? Jul 16, 2021 17:48 |
|
|
# ? Jun 5, 2024 05:14 |
|
The writing has been on the wall for not charging shipping in the pledge manager just before you ship for literally years now. You've gotta do it as close to the point of incurring the expense as you can. It's not a good situation but anyone getting surprised by this now has not been paying attention.
|
# ? Jul 17, 2021 13:30 |
|
dragonraid's back, baby https://www.kickstarter.com/projects/lightraiders/first-watch oh dear
|
# ? Jul 17, 2021 14:49 |
|
Cthulhu Dreams posted:The writing has been on the wall for not charging shipping in the pledge manager just before you ship for literally years now. You've gotta do it as close to the point of incurring the expense as you can. Most of the kickstarters I've pledged in the last few years have done this and every time it ends with a gaggle of very vocal people flipping their poo poo around delivery time when shipping is due. A lot of people wanting full refunds right before shipment. I mean, I do feel bad for some people out of the country who are being asked to pay more in shipping than what they pledged, but come on. You are in Australia! This can't be new to you! I guess it's terminal FOMO poisoning, or just not reading the descriptions......
|
# ? Jul 17, 2021 14:54 |
|
90s Cringe Rock posted:dragonraid's back, baby Looks a lot nicer than most religious games, at least.
|
# ? Jul 17, 2021 15:30 |
|
So, the GameVaults: World of Warcraft® Edition finally updated, and added Miniature Only packs. $45 for 5 models, or $150 for all 20. https://www.kickstarter.com/projects/gamevaults/gamevaults-world-of-warcraft-edition/posts/3247221 However, they all come packaged with "premium Display Cases." I know they're billing this whole thing as Premium Collector Display Ultra Quality, but I don't know who sees this failed campaign and thinks "Let's take the one positive suggestion we've got, and ruin it by trying to upsell more unnecessary fluff." I'm sure, if this were a real campaign with people talking about it, you could do some math here to estimate how much they're valuing the mini's vs the display cases, and how much of that $499 price tag is just being gobbled up by that board. I'll give them credit for not throwing in the towel, but with little over a week to go, this is too little, far too late.
|
# ? Jul 17, 2021 15:42 |
The project's not live yet, but Arc Dream's got an Upcoming Project on Kickstarter for a 25th anniversary edition of the original Delta Green sourcebook: https://www.kickstarter.com/projects/arcdream/delta-green-the-conspiracy Presumably they'll be updating it to use rules for their current Delta Green standalone game and not for Call of Cthulhu, but who knows? Hopefully there are some decent bundle options for the newer Delta Green books at any rate, since some of them are really hard to come by here in Europe.
|
|
# ? Jul 17, 2021 17:36 |
|
Drone posted:The project's not live yet, but Arc Dream's got an Upcoming Project on Kickstarter for a 25th anniversary edition of the original Delta Green sourcebook: https://www.kickstarter.com/projects/arcdream/delta-green-the-conspiracy I think they specified that it's the new Delta Green RPG rules, yeah. The difference, presumably, is that that game has substantially reworked the premise of how Delta Green operates and the situation for modern times, whereas this will be the original 90s premise (and probably, the original 90s timeframe).
|
# ? Jul 17, 2021 17:52 |
|
Desfore posted:So, the GameVaults: World of Warcraft® Edition finally updated, and added Miniature Only packs. $45 for 5 models, or $150 for all 20. https://www.kickstarter.com/projects/gamevaults/gamevaults-world-of-warcraft-edition/posts/3247221 I still feel like this project is a fever dream. I was so certain it was a joke project until Blizzard advertised for it themselves.
|
# ? Jul 17, 2021 17:55 |
malkav11 posted:I think they specified that it's the new Delta Green RPG rules, yeah. The difference, presumably, is that that game has substantially reworked the premise of how Delta Green operates and the situation for modern times, whereas this will be the original 90s premise (and probably, the original 90s timeframe). So Outlaws are going to finally be getting some love then (makes sense, given the title of the rerelease being The Conspiracy)? I know both playstyles are supported but I've read that most (or all?) of the published operations in the new RPG sort of assume that the players are part of the Program.
|
|
# ? Jul 17, 2021 18:12 |
|
Drone posted:So Outlaws are going to finally be getting some love then (makes sense, given the title of the rerelease being The Conspiracy)? I know both playstyles are supported but I've read that most (or all?) of the published operations in the new RPG sort of assume that the players are part of the Program. I don't think exactly? IIRC the original premise was being the Program, more or less, it's just that it worked differently than the current part-Majestic version. But like, you weren't totally rogue the way the Cowboys are now. I have never played, so I might be getting this wrong.
|
# ? Jul 17, 2021 19:06 |
|
Desfore posted:So, the GameVaults: World of Warcraft® Edition finally updated, and added Miniature Only packs. $45 for 5 models, or $150 for all 20. https://www.kickstarter.com/projects/gamevaults/gamevaults-world-of-warcraft-edition/posts/3247221
|
# ? Jul 17, 2021 22:22 |
|
WaywardWoodwose posted:Most of the kickstarters I've pledged in the last few years have done this and every time it ends with a gaggle of very vocal people flipping their poo poo around delivery time when shipping is due. A lot of people wanting full refunds right before shipment. I mean, I do feel bad for some people out of the country who are being asked to pay more in shipping than what they pledged, but come on. You are in Australia! This can't be new to you! I guess it's terminal FOMO poisoning, or just not reading the descriptions...... Yeah I feel like people ought to realise that might happen. I'm in the UK and I just don't back anything that has a physical component, because they can't tell me how much shipping will be, and I can't afford to leave that open-ended. It's too bad but it's important to be realistic.
|
# ? Jul 17, 2021 22:31 |
|
I was really worried when the Crash Octopus designers announced that they were shipping all their games individually through the mail from Japan, but it arrived safely and intact today. It is beautiful, I'm already trying to figure out what color scheme I want to paint on the octopus and tentacles.
|
# ? Jul 17, 2021 23:29 |
|
Ok looking for some feedback. I was finally kind of getting my head around what it would take to make a physical miniature kickstarter rolling. Then I saw an offer that could expand this into including 3D miniatures. But it will be a lot more costly in the short run. Basically, making a mold for a physical mini is kind of cheap, with a $60 mold covering 6-8 minis. For roughly the same price, I could get a mini scanned by an industrial scanner, and turned into a mini. Then I'd need someone to make supports for it, as it seems to be the industry standard these days to offer buyers both unsupported and supported STL files. I've found a company that does this, still waiting for a quote. So now I'm unsure what is the best idea. I could run a very small kickstarter for just metal minis. The upfront cost for the molds would be roughly 200 bucks, and a reasonable goal for the whole campaign would be around 300 bucks, which I'm pretty confident I could reach. Or, I could go big, and go for the whole 3D scanning thing. Suddenly the total is way bigger, like 1 500 bucks. Looking at other minis kickstarters, there's quite a few who don't reach that amount. Is it wrong of me to start to get cold feet when costs balloon like this? The pro would be that the miniature market is really divided right now, so if I only do physical sculpts there's a lot of potential customers I'm leaving out. Having 3D minis done would also make a lot of sense in the long run, as there's no additional cost of production, or the hassle of logistics.
|
# ? Jul 18, 2021 09:12 |
|
lilljonas posted:Ok looking for some feedback. TBH, that's exactly what stretch goals should be for. The basic campaign ought to be for the molds as they are, but have digital sculpts be a stretch goal that interested parties could work towards. If there's enough interest (and iirc you're the guy doing the duck minis, so I'll go out on a limb and say there's probably a lot more interest than you'd think), there'll be enough funding to get the digital sculpts done. If you don't get all the way to digital, then , but at least you have the physical stuff funded.
|
# ? Jul 18, 2021 09:46 |
|
Aniodia posted:TBH, that's exactly what stretch goals should be for. The basic campaign ought to be for the molds as they are, but have digital sculpts be a stretch goal that interested parties could work towards. If there's enough interest (and iirc you're the guy doing the duck minis, so I'll go out on a limb and say there's probably a lot more interest than you'd think), there'll be enough funding to get the digital sculpts done. If you don't get all the way to digital, then , but at least you have the physical stuff funded. This is kind of what I was thinking, but was worried that digital guys would be put off if their ducks never materialized due to the stretch goal not being reached. So I was starting to think that doing TWO kickstarters was an alternative, but it also sounded dumb. But yeah, having the goal of say, 300 be the metal ducks, and 1500 being ”off to the scanner” would probably be the safest way. Then it’s not all or nothing.
|
# ? Jul 18, 2021 10:23 |
|
lilljonas posted:This is kind of what I was thinking, but was worried that digital guys would be put off if their ducks never materialized due to the stretch goal not being reached. So I was starting to think that doing TWO kickstarters was an alternative, but it also sounded dumb. But yeah, having the goal of say, 300 be the metal ducks, and 1500 being ”off to the scanner” would probably be the safest way. Then it’s not all or nothing. What minis are you scanning? Minis that you’ve already sculpted? I have read that consumer grade scanners don’t do great for detailed things like minis and then you have to go in and clean up the model, so it’s probably better to just pay someone to digitally sculpt it at this point. But that can be $100-500 a mini depending on the skill of the sculptor. I guess what I’m getting at is you may want to test out the tech before you get too stuck in. Btw I print and sell 3d printed minis. I can also do supports (enough to get a model printed. )
|
# ? Jul 18, 2021 20:01 |
|
Doctor Zero posted:What minis are you scanning? Minis that you’ve already sculpted? I have read that consumer grade scanners don’t do great for detailed things like minis and then you have to go in and clean up the model, so it’s probably better to just pay someone to digitally sculpt it at this point. But that can be $100-500 a mini depending on the skill of the sculptor. Yeah consumer grade scanners are crap, but this would be an industrial grade laser scanner, so about 0.002 mm fidelity. That's also why it would be a bit expensive (the guy is an engineer and does the scanning/3D minis modelling as a side gig). I'll send a PM regarding supports. lilljonas fucked around with this message at 20:49 on Jul 18, 2021 |
# ? Jul 18, 2021 20:44 |
|
I have gotten stuff professionally 3D scanned with really expensive equipment, but I have to admit my first thought on reading a plan to 3D scan minis was Not that it can't be done, it's just one of those situations that the term "the devil is in the details" was made for. If the guy's been-there-done-that then that's perfect.
|
# ? Jul 18, 2021 20:53 |
|
The Eyes Have It posted:I have gotten stuff professionally 3D scanned with really expensive equipment, but I have to admit my first thought on reading a plan to 3D scan minis was Yeah, I'm quite convinced to not pull the trigger on the 3D part until I've had him do a test scan and had it test printed, for sure. It's not cheap, but a lot cheaper than hiring a 3D sculptor to re-sculpt a desing I've done physically, which sounds very inefficient. And I have no interest in learning 3D sculpting right now.
|
# ? Jul 18, 2021 20:59 |
|
"I'm going to look into 3D scanning" is exactly what stretch goals are for, but be exceptionally transparent that it's not a guaranteed success.
|
# ? Jul 18, 2021 21:14 |
|
That's a good point, actually -- it's totally a thing you can do to say 'at this much cash I will investigate 3D printing options' and explicitly promise nothing. I mean, you're still going to get people reading it as if you've promised them the moon on a stick, but I have zero patience for KS backers who don't pay attention to what they're getting.
|
# ? Jul 18, 2021 21:23 |
|
I don't think planning a 3D scanning stretch goal is going to work out. No one who just wants STLs is going to back the kickstarter in the hopes that enough money is raised in the end for it. Not to mention, every single kickstarter that offers this hybrid class of physical and digital will have all-digital tiers available. How can you create all digital tiers for your kickstarter when you don't even know if you'll hit the dollar amount to unlock that option!
|
# ? Jul 18, 2021 23:23 |
|
You could add them after you hit that goal, tho you'd likely get a bunch of people swapping over and presumably lowering their pledges. Making it a stretch goal that you'll investigate it and see how viable that is seems like a sensible option to me. You could also look into offering the digital items as an add-on? I dunno how that'd work exactly but might be worth looking into. I suspect the "Gimmie da fuckin' minis" crowd is a much larger and easier market to nab vs the "I want digital mini files" crowd, tho I guess I could be wrong
|
# ? Jul 18, 2021 23:30 |
|
Nemesis Of Moles posted:You could add them after you hit that goal, tho you'd likely get a bunch of people swapping over and presumably lowering their pledges. Making it a stretch goal that you'll investigate it and see how viable that is seems like a sensible option to me. You could also look into offering the digital items as an add-on? I dunno how that'd work exactly but might be worth looking into. I suspect the "Gimmie da fuckin' minis" crowd is a much larger and easier market to nab vs the "I want digital mini files" crowd, tho I guess I could be wrong Speaking purely based on my own behaviour, if the mini kickstarter doesn't have a digital tier I just move on and probably will never look at that kickstarter again. If you can't offer a digital option at the start then just scrap it and use any profits from your physical campaign to fund the 3D scanning for a follow-up campaign. Having a kickstarter for physical minis that morphs into one that also offers digital downloads mid-way is going to be the worst of both worlds.
|
# ? Jul 18, 2021 23:36 |
|
You'll probably lose anyone who would just be in it for digital, but those people aren't backing a physical miniatures anyway. As long as you're completely up front that this is a physical kickstarter and digital is a potential (free?) bonus item, there's no room to complain. Not that it'll stop most people, but still. E: IJ raises a good point that neither the digital or physical people will likely be happy with a hybrid project - why not use extra money to get one scanned, then use that scan as a proof of concept for a second kickstarter once you've completed this one? A second KS lets you know the exact scanning costs, you'll have more ducks sculpted, and you'll also have more credibility after a successful first KS. moths fucked around with this message at 23:42 on Jul 18, 2021 |
# ? Jul 18, 2021 23:37 |
|
I can really only speak to making TTRPGs and card games, but in those markets at least, offering a digital version of the card game and a physical copy of the game halfway through was one of the more profitable things we did. Ours was pretty frequently requested/demanded in the moment tho and we went in assuming they'd be purely physical or purely digital. Obv the space is v different though. Adding a digital item halfway through does mesh pretty well with a tactic I've had some success with for overcoming that middle-campaign slump, where you hit up a whole new market - launching on a strong Physical tier, then adding a digital one to grab people who only want a digital tier might score you a decent influx with pretty minimal risk to yourself. I don't really see it as the worst of either world, assuming you'd basically doing the same labour either waymoths posted:A second KS lets you know the exact scanning costs, you'll have more ducks sculpted, and you'll also have more credibility after a successful first KS. This last point is excellent tho. Do a reprint + Digital run after this KS, maybe with some bonus ducks, and you'll do great
|
# ? Jul 19, 2021 00:01 |
|
Thanks for the good advice. Yeah, the more I think about it, the more it makes sense to divide them into two kickstarters. Project #1 will be to get as many physical casts done, plus a stretch goal where I explore 3D scanning etc. If I reach that stretch goal I can offer the test scan for free for everyone who backed for $1 or more: that way I can give a "taster" to those who are not interested in backing for physical minis, without them feeling ripped off. A buck for a duck is a good deal. Someone who printed one duck might be interested in more, and it'll be a very easy way to get a foot in the door with those customers, and reach them with e-mails through kickstarter etc. when the digital project is good to go. Then project #2 will simply be to get as many minis scanned as possible. The cost would be more or less directly tied to the number of minis, as all the physical molds etc are done, so it would be very simple to calculate the goals. I.e 600 bucks = 10 ducks, 900 bucks = 15 ducks and so on. Then it's less of an all or nothing deal. lilljonas fucked around with this message at 12:14 on Jul 19, 2021 |
# ? Jul 19, 2021 12:10 |
|
Sounds like a good plan. Personally, based on the greens you've posted, I'll be interested in picking up a couple in metal and more of them as scanned, assuming that works out, so looking forwards to your launch.
|
# ? Jul 19, 2021 12:52 |
|
senrath posted:Sounds like a good plan. Personally, based on the greens you've posted, I'll be interested in picking up a couple in metal and more of them as scanned, assuming that works out, so looking forwards to your launch. Thanks! I'm getting pretty stoked myself. I'm going back and doing new versions of some of my first sculpts, and adding more ducks. Here's crossbow duck and magic duck:
|
# ? Jul 19, 2021 13:18 |
|
In non-duck news, the WOW Buildings creator is back, for a Chernobyl-themed set of terrain. https://www.kickstarter.com/projects/wowbuildings/wow-buildings-goes-radioactive-in-chernobyl-3d-stl-files/description There's also a set of modular building elements and some great looking ruins.
|
# ? Jul 19, 2021 23:15 |
|
mllaneza posted:In non-duck news, the WOW Buildings creator is back, for a Chernobyl-themed set of terrain.
|
# ? Jul 20, 2021 00:41 |
|
Those look appropriate for basically any sci-fi miniatures game. Just throw in some random skulls for 40k or some cardboard cargo containers for Infinity.
|
# ? Jul 20, 2021 01:13 |
|
InternetJunky posted:These look really good. Are there game systems that would make use of these? Twilight 2000 just got a new edition, Zona Alpha seems perfect, and you can also scale it down for wargames like Team Yankee / Battlegroup NORTHAG / Cold War Commander / or Force on Force. So, yes.
|
# ? Jul 20, 2021 01:42 |
|
Silvervine person - I'm not sure why you want my discord ID to give me the voucher for the POD copy of Floria - it's not a necessary bit of information given that you already have my email, and doesn't take into account people who either don't want Discord, or don't want to join yet another discord server.
|
# ? Jul 20, 2021 08:23 |
|
mllaneza posted:In non-duck news, the WOW Buildings creator is back, for a Chernobyl-themed set of terrain. Oh man, this takes me back to the papercraft models of nuclear reactors that a nuclear power company sold in Germany. Up until Fukushima happened.
|
# ? Jul 20, 2021 08:34 |
|
Angrymog posted:Silvervine person - I'm not sure why you want my discord ID to give me the voucher for the POD copy of Floria - it's not a necessary bit of information given that you already have my email, and doesn't take into account people who either don't want Discord, or don't want to join yet another discord server. AFAIK the voucher is being sent out my e-mail regardless and joining the discord is just an optional perk
|
# ? Jul 20, 2021 12:54 |
|
yeah already got mine via drivethru
|
# ? Jul 20, 2021 12:58 |
|
|
# ? Jun 5, 2024 05:14 |
|
InternetJunky posted:These look really good. Are there game systems that would make use of these? These would be awesome for Fallout Wasteland Warfare / RPG, or even the Aliens RPG.
|
# ? Jul 20, 2021 14:20 |