|
Atlas Hugged posted:Thanks for taking the time to explain it. It might be fun to play a game or two with them just to check out the rules. That channel also does battle reports and reviews from a wide variety of games, current GW, older GW, and indie games. Here's a KT21 video, this should give you a good idea what the game plays like. Deathwatch and Necrons are both completely sick lists, so dangerous. https://www.youtube.com/watch?v=_n3nrV38VOs
|
# ? Aug 29, 2021 00:57 |
|
|
# ? May 23, 2024 15:16 |
|
I bought the Octarius box and I’m looking to part out the Orks, Krieg, and Ork shanty town terrain. Anyone interested? I was thinking $60 apiece for the Orks and Krieg, and $80 for the terrain, plus shipping.
|
# ? Aug 29, 2021 02:33 |
|
DAD LOST MY IPOD posted:I strongly disagree. I’ve been resin printing for a relatively short time and I’m shocked at how easy it is. Yes, I occasionally get print fails, but almost always I can identify what I did wrong. I use proper PPE at all times. My prints look sharp and the Lychee slicing software is a dream. I would strongly recommend this for anyone who wants to make terrain or accessories, or even entire models. Seconding all of this. Yes, it is a hobby unto itself, there is a little bit of a learning curve, but drat if the results aren't totally worth it. If I painted from now until the end of the year, I wouldn't get remotely caught up on my STL pile of shame. And luckily, the STL pile of shame consists of a shitload of files sitting on my 6 TB external hard drive, instead of a pile of boxes/packaging that takes up additional room in my closet or wherever. quote:FDM printing, on the other hand, can completely eat my rear end. I haven't fired up my Ender 5 in I don't know how many months now, but I've been 3d printing resin miniatures like a madman (E: in fact, I have some not-GSC dudes printing at the moment). It's loving addicting.
|
# ? Aug 29, 2021 02:35 |
|
Xenomrph posted:I bought the Octarius box and I’m looking to part out the Orks, Krieg, and Ork shanty town terrain. Anyone interested? Are the Krieg multi-part plastic? Can I swap heads? E: Found the sprues online, but I can't really tell if it'd be doable to put different heads on them, or if all that poo poo on their chests is separate. 3 Action Economist fucked around with this message at 02:42 on Aug 29, 2021 |
# ? Aug 29, 2021 02:37 |
|
Anarcho-Commissar posted:Are the Krieg multi-part plastic? Can I swap heads? I’ll crack open the box later and see if I can figure it out.
|
# ? Aug 29, 2021 02:48 |
|
Xenomrph posted:I’ll crack open the box later and see if I can figure it out. Okay. Definitely interested, but literally every picture of the sprues are chest-down.
|
# ? Aug 29, 2021 02:52 |
Krieg are multipart with separate heads
|
|
# ? Aug 29, 2021 04:16 |
|
YOU WIN, Anarcho-Commissar!
|
# ? Aug 29, 2021 04:33 |
|
The question still remains if other heads would fit, but I did see that the boxes are permanently attached to their chests. Not ideal for what I want, but I could live with it.
|
# ? Aug 29, 2021 12:23 |
|
Warhammer Community had an article with the Kreig minis converted to GSC with head and arm swaps, so it's doable, just may require a bit of shaving down joints etc. https://www.warhammer-community.com/2021/08/24/hobbyists-dig-into-the-death-korps-and-ork-kommandos-from-kill-team-octarius/
|
# ? Aug 29, 2021 13:01 |
|
Anarcho-Commissar posted:The question still remains if other heads would fit, but I did see that the boxes are permanently attached to their chests. Not ideal for what I want, but I could live with it. Weird tech boxes are always a good accessory in the 41st millennium
|
# ? Aug 29, 2021 13:27 |
|
Oh that's perfect! The Valhallan/Soviet look is what I'm trying for. And using a rolled up plasch is a clever way to hide the chest boxes.
|
# ? Aug 29, 2021 13:28 |
|
Anarcho-Commissar posted:Oh that's perfect! The Valhallan/Soviet look is what I'm trying for. And using a rolled up plasch is a clever way to hide the chest boxes. Just an FYI, but if you don't mind going third party, there are some resin kits very similar to the old Valhallan range out there. I've ordered other stuff from all three in the past and was really pleased with the results from each. Victoria and Anvil did require some minor cleanup, but ArtelW was ready to paint after a quick wash in soapy water and the removal of the gate. https://victoriaminiatures.com/collections/svargan-shock-soldats https://anvilindustry.co.uk/red-army https://artelw.com/search?keyword=Einherjar
|
# ? Aug 29, 2021 22:37 |
|
The Easy Rider posted:Just an FYI, but if you don't mind going third party, there are some resin kits very similar to the old Valhallan range out there. I've ordered other stuff from all three in the past and was really pleased with the results from each. Victoria and Anvil did require some minor cleanup, but ArtelW was ready to paint after a quick wash in soapy water and the removal of the gate. Yeah, Vic Minis is where I'll likely get the heads to use. E: Although those Anvil ones look way nicer. Also, I made a measuring tool thing so no one has to pay GW money for one: https://www.thingiverse.com/thing:4944934 3 Action Economist fucked around with this message at 00:28 on Aug 30, 2021 |
# ? Aug 30, 2021 00:24 |
|
Anarcho-Commissar posted:Oh that's perfect! The Valhallan/Soviet look is what I'm trying for. And using a rolled up plasch is a clever way to hide the chest boxes. Here's the full video for the Valhallans GW showed off, https://www.youtube.com/watch?v=j19BRQT58pA
|
# ? Aug 30, 2021 01:17 |
|
I just want clarification on something about the new Kill Team. Let’s use Krieg as an example. Every game my base Krieg Kill team will be ten troops consisting of (if I remember correctly) 1 Sergeant/Leader unit + 9 specialists (one of each max)/generic troopers mix. 4 additional generic troops could be added via the strategem thing. So, if all I own is Octarius, I basically field every soldier I build in every game, right?
|
# ? Aug 30, 2021 03:31 |
|
Random Kill Team Octarius question: Each model has a covert/active token that flips to show their status, but they'll only ever have one of these two and only showing one side. They also might have a wounded token. Are there other things that are likely to attach and follow the little buggers? Overwatch? A wounds left die? I wanted to know for... reasons.
|
# ? Aug 30, 2021 03:34 |
|
Eediot Jedi posted:Random Kill Team Octarius question: You'll need injured tokens for units at half wounds. Dice would be handy to mark wounds on models to avoid bookkeeping. You'll also need something to mark +/- AP for lots of the factions. Overwatch only happens with big difference in model counts, but if you have a bad memory some kind of 'has fired overwatch' would be handy.
|
# ? Aug 30, 2021 04:06 |
|
You could easily combine the injured token + dice for wound tracking. White dice with total wounds when above half. Red dice with total wounds for injured.
|
# ? Aug 30, 2021 04:11 |
|
Let's say I were to play killteam, as much as I loath anything over 6mm, if I played vostroyans what would I want/need?
|
# ? Aug 30, 2021 04:22 |
|
Virtual Russian posted:Let's say I were to play killteam, as much as I loath anything over 6mm, if I played vostroyans what would I want/need? 14 guardsmen, including a sergeant and up to one each of: comms, flamer, grenade launcher, meltagun, plasma gun and sniper rifle. You could bring fewer special weapons than that if you want to, but you wouldn't really get anything to balance out having less of them.
|
# ? Aug 30, 2021 04:37 |
|
E. Nesbit posted:You'll need injured tokens for units at half wounds. Dice would be handy to mark wounds on models to avoid bookkeeping. You'll also need something to mark +/- AP for lots of the factions. Overwatch only happens with big difference in model counts, but if you have a bad memory some kind of 'has fired overwatch' would be handy. Atlas Hugged posted:You could easily combine the injured token + dice for wound tracking. White dice with total wounds when above half. Red dice with total wounds for injured. Gotta say holy poo poo it is cool to have idea, then prototype of idea in your hands in two hours. 3d printing owns. I don't think I can fit a full wound die without making my thing significantly bigger than what I'm aiming for. Wounded token sure but the wound die might have to tag along.
|
# ? Aug 30, 2021 05:15 |
|
mllaneza posted:Here's the full video for the Valhallans GW showed off, I found some printable early war helmets and budenovkas, but it's weird that no one out there offers printable heads with ushankas. It costs more on shipping than it costs for the bits. E: Although I do have Warlord's winter Soviets, I wonder how they'll look.... 3 Action Economist fucked around with this message at 13:44 on Aug 30, 2021 |
# ? Aug 30, 2021 13:39 |
|
Anarcho-Commissar posted:I found some printable early war helmets and budenovkas, but it's weird that no one out there offers printable heads with ushankas. Anvil industry do Ushankas.
|
# ? Aug 30, 2021 13:47 |
|
Z the IVth posted:Anvil industry do Ushankas. Yes, and £10 for shipping.
|
# ? Aug 30, 2021 14:04 |
|
GW posted a teaser for the next UW season
|
# ? Aug 30, 2021 16:46 |
|
Finally!
|
# ? Aug 30, 2021 19:18 |
|
Vulpes Vulpes posted:Finally! Finally? S4 just wrapped up! Slow down the train, I’m not done with my S1 warbands.
|
# ? Aug 30, 2021 21:36 |
|
Crackbone posted:Finally? S4 just wrapped up! Slow down the train, I’m not done with my S1 warbands.
|
# ? Aug 30, 2021 22:37 |
|
COVID is still beyond scarily present in Florida so I'm not going to get to play a game for a while, but I'm putting together some kill teams. Dug around in an old box to find some old necrons, then rebased them kinda lazily with the idea of making them look underwater but didn't want to put in effort so just some drybrushing My tau that I shelved because of 9th edition are going to get some love as holy poo poo this looks like a proper kill team
|
# ? Aug 31, 2021 02:44 |
|
.
3 Action Economist fucked around with this message at 14:36 on Sep 2, 2021 |
# ? Sep 2, 2021 13:53 |
|
Ignore that post above. For the record, Warlord's winter Soviet heads fit the Krieg quite well, aside from having to clip the necks to fit.
|
# ? Sep 2, 2021 18:05 |
|
My friend and I decided to put his 3D printer through its paces. I am stupidly excited to get to work painting this.
|
# ? Sep 3, 2021 04:34 |
|
Atlas Hugged posted:My friend and I decided to put his 3D printer through its paces. Oh. poo poo. Someone did the Gorkamorka Orka Forta? Goddamn, I need to find a house so I can get my printer set up.
|
# ? Sep 3, 2021 12:35 |
|
Atlas Hugged posted:My friend and I decided to put his 3D printer through its paces. Where did you get that from? And do they have other non-Ork terrain?
|
# ? Sep 3, 2021 12:56 |
|
It's just on thingiverse (search Ork fort) and they have a bunch of stuff, but a lot of it is Ork related.
|
# ? Sep 3, 2021 13:01 |
|
Atlas Hugged posted:My friend and I decided to put his 3D printer through its paces. gently caress This owns
|
# ? Sep 3, 2021 13:07 |
Yeah im gonna need the for that fort
|
|
# ? Sep 3, 2021 13:17 |
|
Atlas Hugged posted:It's just on thingiverse (search Ork fort) and they have a bunch of stuff, but a lot of it is Ork related. Not anymore!
|
# ? Sep 3, 2021 13:51 |
|
|
# ? May 23, 2024 15:16 |
|
Yeah, apparently gone now. Anyway: Just need to get some green stuff for cloaks on the sniper team.
|
# ? Sep 3, 2021 14:06 |