|
And the goo got everywhere.
|
# ? Sep 12, 2021 22:38 |
|
|
# ? Jun 7, 2024 14:27 |
|
TobinHatesYou posted:So um, Stan's Darts basically don't work for most road tire punctures. The plastic tip goes in fine, but the feathered rubber bit slides up the shaft and never makes it into the hole. For road, the answer is DynaPlug, especially if you are running higher pressures. Worms/bacon strips work "OK" to a point, but they can wiggle out at higher pressures, resulting in a giant pool of sealant and maybe some hilarious spray patterns wherever your store your bike. Well poo poo, thanks for letting me know. Guess I’ll check out Dynaplug.
|
# ? Sep 12, 2021 22:54 |
|
Marshmonkey and I finally received our Priority Apollo 11s today. First impressions are very positive after a ride around the neighborhood without having everything dialed in yet. I'm hoping that getting the mechanical discs dialed in will improve the braking because I can't lock the wheels up if I wanted to and they feel very weak compared to hydraulics. Was right between a small and medium frame, hoping I don't regret going with the medium.
|
# ? Sep 13, 2021 04:06 |
|
eeenmachine posted:Marshmonkey and I finally received our Priority Apollo 11s today. First impressions are very positive after a ride around the neighborhood without having everything dialed in yet. I'm hoping that getting the mechanical discs dialed in will improve the braking because I can't lock the wheels up if I wanted to and they feel very weak compared to hydraulics. Was right between a small and medium frame, hoping I don't regret going with the medium. You should definitely be able to lock the wheel up. Most likely problem is the calipers aren't adjusted correctly. That said, needing to adjust the calipers as the pads wear (or as they un-adjust themselves due to vibration) is a mechanical disc thing.
|
# ? Sep 13, 2021 04:23 |
|
eeenmachine posted:Marshmonkey and I finally received our Priority Apollo 11s today. First impressions are very positive after a ride around the neighborhood without having everything dialed in yet. I'm hoping that getting the mechanical discs dialed in will improve the braking because I can't lock the wheels up if I wanted to and they feel very weak compared to hydraulics. Was right between a small and medium frame, hoping I don't regret going with the medium. I think that's the first belt drive drop bar bike I've seen, unless I've forgotten some that didn't seem viable anyway. What's the lowest ratio you can get with the Alfine?
|
# ? Sep 13, 2021 07:37 |
|
I converted mine to drop bar, haven’t posted it in ages tho.
|
# ? Sep 13, 2021 07:51 |
|
Ola posted:I think that's the first belt drive drop bar bike I've seen, unless I've forgotten some that didn't seem viable anyway. What's the lowest ratio you can get with the Alfine? It has an Alfine 11 not sure the on exact numbers but I know some people get a different chainring to get slightly better climbing gears.
|
# ? Sep 13, 2021 14:10 |
|
Something I was reminded while changing out my cleats the other day: What are those little plastic ovals in the middle of Look Keo (and clones) cleats for? I assume its for maintaining proper positioning when swapping in new cleats but I don't understand how they're supposed to be used? Are there special Look brand shoes that have a slot for those to go in or something?
|
# ? Sep 13, 2021 18:46 |
|
tylertfb posted:Something I was reminded while changing out my cleats the other day: What are those little plastic ovals in the middle of Look Keo (and clones) cleats for? I assume its for maintaining proper positioning when swapping in new cleats but I don't understand how they're supposed to be used? Are there special Look brand shoes that have a slot for those to go in or something? In theory your shoe has a bolt hole there so you leave that piece in place and just put the new cleat on like a puzzle piece. This keeps your position when swapping cleats. I don’t have any shoes with this feature though.
|
# ? Sep 13, 2021 19:15 |
|
Literally Lewis Hamilton posted:In theory your shoe has a bolt hole there so you leave that piece in place and just put the new cleat on like a puzzle piece. This keeps your position when swapping cleats. I don’t have any shoes with this feature though. After some quick googling (probably should have done that first!) I see that it (the grey oval) also presses against the steel plate of the pedal to dampen vibrations in the system when you're clipped in. What shoes even have that feature? I've never actually seen it in the wild.
|
# ? Sep 13, 2021 19:30 |
|
tylertfb posted:After some quick googling (probably should have done that first!) I see that it (the grey oval) also presses against the steel plate of the pedal to dampen vibrations in the system when you're clipped in. What shoes even have that feature? I've never actually seen it in the wild. I typically see the center hole on Italian shoes. Sidis, Gaernes, Cronos, etc. The newest Gaernes seem to have dropped that feature though. Drawing an outline of your old cleats with a silver sharpie is just as easy and doesn't add weight to the shoe's construction.
|
# ? Sep 14, 2021 00:13 |
|
Have any of you messed around with Chinese OEM carbon framesets like TAN TAN or Seraph? http://tantancycling.com/index.php?_m=mod_product&_a=prdlist&cap_id=230 I want to build a crotch rocket apart from my utilitarian commuter.
|
# ? Sep 14, 2021 01:13 |
|
osker posted:Have any of you messed around with Chinese OEM carbon framesets like TAN TAN or Seraph? They can be good. Or bad. I've never heard of those two. I know a couple folks who've been very happy with ICAN frames (paging forums user e.pilot). I've raced a Miracle frame.
|
# ? Sep 14, 2021 02:06 |
|
osker posted:Have any of you messed around with Chinese OEM carbon framesets like TAN TAN or Seraph? You just have to google around and see if you can find some small time youtuber or forums poster posting experiences/reviews with the frame you`re looking at. i bought a elves frame the other day https://www.aliexpress.com/item/32945668099.html check back in 2-3 months when i get delivered and built up
|
# ? Sep 14, 2021 09:32 |
|
osker posted:Have any of you messed around with Chinese OEM carbon framesets like TAN TAN or Seraph? I bought a Dengfu a couple years back and it's still treating me great after 7,000+ miles. Swapped to an outboard 24/22 mm adaptor after the BB30 started creaking, but otherwise I haven't had a single issue. Modal Auxiliary fucked around with this message at 15:50 on Sep 14, 2021 |
# ? Sep 14, 2021 15:46 |
How do you all find the correct bottom bracket tool for your bike? Looks like there are many different kinds and I don’t know which one I have. There’s a finder on Park tool’s website but it didn’t even list Cube bikes
|
|
# ? Sep 14, 2021 16:12 |
|
tuyop posted:How do you all find the correct bottom bracket tool for your bike? Looks like there are many different kinds and I don’t know which one I have. There’s a finder on Park tool’s website but it didn’t even list Cube bikes Google the bike and the year it was made, find the spec, go the BB manufacturer's website, cry at the price, etc. (looking at you, Specialized / Praxis) post your bike here or in the maintenance thread?
|
# ? Sep 14, 2021 16:46 |
|
tuyop posted:How do you all find the correct bottom bracket tool for your bike? Looks like there are many different kinds and I don’t know which one I have. There’s a finder on Park tool’s website but it didn’t even list Cube bikes Ask in the repair thread with pics and measurements: https://forums.somethingawful.com/showthread.php?threadid=3933901
|
# ? Sep 14, 2021 16:50 |
|
meltie posted:Google the bike and the year it was made, find the spec, go the BB manufacturer's website, cry at the price, etc. (looking at you, Specialized / Praxis) Are Praxis BBs really that expensive?
|
# ? Sep 14, 2021 16:57 |
|
M30 bb is cheap, as is the tool for it.
|
# ? Sep 14, 2021 19:34 |
|
vikingstrike posted:Are Praxis BBs really that expensive? not hugely, but the tool for mine cost more than it should for what the tool does.
|
# ? Sep 14, 2021 19:35 |
meltie posted:Google the bike and the year it was made, find the spec, go the BB manufacturer's website, cry at the price, etc. (looking at you, Specialized / Praxis) I guess I don't know what I'm looking for. It's a 2019 Cube Nuroad Pro FE. Does the crankset have only one type of BB?
|
|
# ? Sep 14, 2021 20:26 |
|
tuyop posted:I guess I don't know what I'm looking for. It's a 2019 Cube Nuroad Pro FE. Does the crankset have only one type of BB? Yes, it's a Shimano external BB, probably RS500 or similar. You want this guy https://www.parktool.com/product/bottom-bracket-tool-bbt-9?category=Crank%20%26%20Bottom%20Bracket
|
# ? Sep 14, 2021 21:04 |
|
vikingstrike posted:Are Praxis BBs really that expensive? Is your time not being able to ride worth something to you? That's the problem up here. Need a Praxis BB? GLHF it's probably a year out at this point. If you aren't already hoarding bike parts it's too late for you.
|
# ? Sep 14, 2021 21:07 |
|
I took the long way to get coffee today
|
# ? Sep 14, 2021 21:11 |
|
osker posted:Have any of you messed around with Chinese OEM carbon framesets like TAN TAN or Seraph? I have an ICAN TT frame I built up, no complaints really for what I paid other than being boring raw carbon. I’ll eventually swap the group onto a better frame or get this one painted or something in the future, but it works just fine in the meantime.
|
# ? Sep 14, 2021 21:12 |
|
Whaaaat up fuckers, been meaning to post in this thread as I NEED A NEW BIKE and would love your recommendations. I currently ride a cruiser or commuter or something I don't know, and generally knock out 10 to 15 miles every other day and barely break a sweat. Problem is, assholes leave me in their dust and look cool while doing it, and it's now time for me to be a cool rear end in a top hat. Here's my current ride. She's served me well but it's time to upgrade. In talking with some folks at bike shops, they recommend an endurance road bike but I don't even know where to start since the prices can range from $500 to $7,000. Given my lovely explanation of what I'm looking for, what are your recommendations? Not too worried about price ($1k to $2k seems fair for decent bike) and I'd love something I could burn rubber on while getting a drat good workout. I'd prefer to buy something online so I don't have to deal with people and transportation.
|
# ? Sep 14, 2021 21:25 |
SimonSays posted:Yes, it's a Shimano external BB, probably RS500 or similar. You want this guy https://www.parktool.com/product/bottom-bracket-tool-bbt-9?category=Crank%20%26%20Bottom%20Bracket Thanks! But inside I have an unthreaded plastic bearing thing that needs some kind of tool you hit with a hammer to remove.
|
|
# ? Sep 14, 2021 21:36 |
|
Louisgod posted:Given my lovely explanation of what I'm looking for, what are your recommendations? Not too worried about price ($1k to $2k seems fair for decent bike) quote:and I'd love something I could burn rubber on while getting a drat good workout. Of course, having a fast efficient bike is still great and feels great to ride. quote:I'd prefer to buy something online so I don't have to deal with people and transportation. kimbo305 fucked around with this message at 21:45 on Sep 14, 2021 |
# ? Sep 14, 2021 21:43 |
|
Pedaling faster is always an option but that bike is getting close to a decade old, which isn't necessarily bad, but I'm ready to get something specifically made for speed and endurance. If online is too difficult then I have no qualms with picking one up locally (there are a bajillion bike shops here in Eugene) but would love some specific names/builds to try so the employees have an idea of what I'm looking for. I'm 5'8", ~165, with zero body limitations. Seat is set at the right height, assuming the right height is where your leg is fully extended when the pedal is at its lowest point.
|
# ? Sep 14, 2021 21:51 |
|
tuyop posted:Thanks! But inside I have an unthreaded plastic bearing thing that needs some kind of tool you hit with a hammer to remove. Ok well the page doesn't mention the BB or shell at all. Get in touch with the shop you bought it from and see what they say.
|
# ? Sep 14, 2021 21:53 |
|
EvilJoven posted:Is your time not being able to ride worth something to you? That's the problem up here. Need a Praxis BB? GLHF it's probably a year out at this point. I have a Praxis BB in my parts bin, anyone here is welcome to it for free. BB86, it was for a Zayante Carbon crankset. Cups, caps and spring. But it does need new bearings pressed into it. Gravel is hell on road parts.
|
# ? Sep 14, 2021 21:54 |
|
Louisgod posted:Pedaling faster is always an option but that bike is getting close to a decade old, which isn't necessarily bad, but I'm ready to get something specifically made for speed and endurance. You're set on road bikes, right? Like 0% on dirt/gravel, except if you get lost or something.
|
# ? Sep 14, 2021 21:59 |
|
kimbo305 posted:You're set on road bikes, right? Like 0% on dirt/gravel, except if you get lost or something. The bike paths closest to my house that are only a mile away ride parallel to a river and they're fully paved, so I don't run into much if any dirt/gravel, and Eugene has such wonderful bike paths/lanes that you don't run into gravel/dirt unless you want to on purpose. That said, I'm not against dirt/gravel bikes but I prefer to have a leisurely ride.
|
# ? Sep 14, 2021 22:03 |
|
then you're looking for an endurance road bike, you can fit relatively wide tires for comfort, sit relatively upright compared to a 'true' race bike (more comfy but still fast). I'd recommend an aluminium frame one, as steel is heavy and expensive, and carbon is too expensive for what you want and breaks more easily. For groupset you can't go wrong with shimano 105 (or SRAM Rival, but most people prefer shimano). Most bikes in that category come with disc brakes nowadays, hydraulic is the way to go over mechanical by far. The bike market is quite hosed at the moment, so you'll might have to settle for a non-ideal one, or get on a looong waiting list. Fit is by far the most important factor: if a bike is too large/small for you you'll hate riding it, so no compromises there. Groupset: you can downgrade to tiagra, or up to ultegra, but 105 is by far the best bang for your buck. Bikes in this category from some bigger names: Canyon Endurace 7.0 AL Disc - 1900 bucks Giant Contend AR 1 - 1800 bucks Trek Domane AL 5 Disc - 2000 bucks Try one of these or something like it! Most brands have a model with similar specs in their lineup.
|
# ? Sep 14, 2021 22:38 |
SimonSays posted:Ok well the page doesn't mention the BB or shell at all. Get in touch with the shop you bought it from and see what they say. LBS just called to inform me that they destroyed the caps on the old one so I guess it’s a moot point and I’ll ask what they installed when I go pick it up! Thanks for the help.
|
|
# ? Sep 14, 2021 22:47 |
|
I've been thinking about an upgrade similar to what Louisgod is considering with a similar budget. Current ride: My closest LBS seems to mostly stock Giant (when anything is in stock) so I've been eyeballing something like the Contend. Glad to know it seems to be thread approved. A specific question I have: would something more oriented for gravel/dirt also be better at handling bad road surfaces like old exposed aggregate with patches or cobblestones? I've been doing all my riding around Philadelphia/Camden and run into these a fair bit. Is there anything I should factor in for frequently encountering awful road surfaces?
|
# ? Sep 14, 2021 22:51 |
|
pmcTRILOGY posted:I've been thinking about an upgrade similar to what Louisgod is considering with a similar budget. Yeah, if a bike is good on gravel it's also better on terrible roads. It's mainly the tires that make the difference though, so get something that can fit wide(-ish) tires and you're good most of the time. Think 35-40mm wide ones. You can run them tubeless on lower pressures to get a lot of compliance.
|
# ? Sep 14, 2021 22:57 |
|
pmcTRILOGY posted:Is there anything I should factor in for frequently encountering awful road surfaces? 32mm is gonna do a lot for really cracked up roads and even the occasional missed pothole. That said, only newer road frames tend to have that much clearance. 40mm would be a bit slow when you're riding on majority smooth road. Cracks/bumps that would have me raising off the saddle for comfort at 32mm, I'd just ride right over at 40.
|
# ? Sep 14, 2021 23:04 |
|
|
# ? Jun 7, 2024 14:27 |
|
Louisgod posted:The bike paths closest to my house that are only a mile away ride parallel to a river and they're fully paved, so I don't run into much if any dirt/gravel, and Eugene has such wonderful bike paths/lanes that you don't run into gravel/dirt unless you want to on purpose. That said, I'm not against dirt/gravel bikes but I prefer to have a leisurely ride.
|
# ? Sep 14, 2021 23:20 |